Why do I get errors when I use pre-trigger scans with a relatively small number of samples?

I have a PXI6115 (hi mem option) that I am using to collect data at 5 MHz. If I collect about 10,000 samples with 100 pretrigger scans, the acquisition works fine. However, if I collect 1000 samples with 100 pretrigger scans, I get an AI Read error. Likewise, I can collect 10 pretrigger scans with a sample size of 1000 but I get an error if I try to colelct 10 pretrigger scans with only 100 total samples.
Why is that the case?
Thanks in advance.

This sounds familiar.
I do not remeber the final answer, but this is what I can recomend. Use the Info-LabVIEW search engine
http://www.searchview.net/
To search fro everything posted by "Roger Hart" (sometime in the last 3 years).
I believe he posted a number of e-mails discussing what he found.
If this approach get you an answer, please summarize the results here.
Doing what I can to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

Why the iPhone gets heated when someone uses the internet?

Why the iPhone gets heated when someone uses the internet?

because that's what happens when use electronic devices...they warm up.

Getting errors when iam using bapi ' BAPI_PO_CREATE1'

Hi Sap Gurus,
I need small info over bapi BAPI_PO_CREATE1.
While creating Purchase orders using BAPI_PO_CREATE1 it is not allowing me to enter partner function details .I am getting below errors.
i.e
1) it is not allowing to update partner function details.and iam not getting what excact bapi structure for partner function details.here i found 'BAPIEKKOP' in tables option.but these fields are not matching with ME21N screen partner function fields . I want to update PARTNER FUNTCION, PARTNER NAME, DEFALT PARTNER.in bapi structure BAPIEKKOP there is no DEFAULT PARTNER instead of this there is DELETION INDICATOR.
Pls let me know the exact bapi structure and fields in BAPI.
2). I am getting the below error when iam posting the Pur.Order
i.e Item 10 Acct Assgt 1
Account 460600 does not exist in chart of accounts CANO.
what does it means? Evenif that Account is existed in chart of account CANO and Even i posted that PO, it showing like above.and iam getting all field in PO like CO area,COST center and G/L account for Account Assingment group 'K' .
I could not understand why it is giving such type of errors.
Pls let me know the anwsers for above errors .
thanks in advance.

Hi Sap Gurus,
I need small info over bapi BAPI_PO_CREATE1.
While creating Purchase orders using BAPI_PO_CREATE1 it is not allowing me to enter partner function details .I am getting below errors.
i.e
1) it is not allowing to update partner function details.and iam not getting what excact bapi structure for partner function details.here i found 'BAPIEKKOP' in tables option.but these fields are not matching with ME21N screen partner function fields . I want to update PARTNER FUNTCION, PARTNER NAME, DEFALT PARTNER.in bapi structure BAPIEKKOP there is no DEFAULT PARTNER instead of this there is DELETION INDICATOR.
Pls let me know the exact bapi structure and fields in BAPI.
2). I am getting the below error when iam posting the Pur.Order
i.e Item 10 Acct Assgt 1
Account 460600 does not exist in chart of accounts CANO.
what does it means? Evenif that Account is existed in chart of account CANO and Even i posted that PO, it showing like above.and iam getting all field in PO like CO area,COST center and G/L account for Account Assingment group 'K' .
I could not understand why it is giving such type of errors.
Pls let me know the anwsers for above errors .
thanks in advance.

Why am I getting error when installing 5.1 iOS update

Why am I getting an error message when trying to do software update to 5.1 iOS on iPhone4?

It says more than that... try providing the EXACT and COMPLETE error if you want/need help.
Alternatively, type the error into google and see what a search reveals.

Why am I getting Artifacts when I use the Adjustment Brush to Lighten or Darken?

I get artifacts when I lighten (dark specks) or darken (white specks) when I use the adjustment brush to adjust exposure on my photos. Any ideas why this is happening? It would seem to be a big enough bug to get noticed and promptly fixed, unless I am doing something wrong.

Richard,
Try turning off Auto Mask in the brush panel:
Hal

I am getting errors when I use the make command

I am trying to install this software and the ./configure went smoothly but the "make" command is giving me several warnings and a few errors which I am not sure how to fix
this is the output of make
Makefile:847: warning: overriding commands for target `clean-bcheck'
Makefile:825: warning: ignoring old commands for target `clean-bcheck'
Makefile:852: warning: overriding commands for target `bcheck-am'
Makefile:830: warning: ignoring old commands for target `bcheck-am'
Makefile:869: warning: overriding commands for target `clean-bcheck'
Makefile:847: warning: ignoring old commands for target `clean-bcheck'
Makefile:874: warning: overriding commands for target `bcheck-am'
Makefile:852: warning: ignoring old commands for target `bcheck-am'
Makefile:906: warning: overriding commands for target `clean-bcheck'
Makefile:869: warning: ignoring old commands for target `clean-bcheck'
Makefile:911: warning: overriding commands for target `bcheck-am'
Makefile:874: warning: ignoring old commands for target `bcheck-am'
make all-recursive
make[1]: Entering directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1'
Makefile:847: warning: overriding commands for target `clean-bcheck'
Makefile:825: warning: ignoring old commands for target `clean-bcheck'
Makefile:852: warning: overriding commands for target `bcheck-am'
Makefile:830: warning: ignoring old commands for target `bcheck-am'
Makefile:869: warning: overriding commands for target `clean-bcheck'
Makefile:847: warning: ignoring old commands for target `clean-bcheck'
Makefile:874: warning: overriding commands for target `bcheck-am'
Makefile:852: warning: ignoring old commands for target `bcheck-am'
Makefile:906: warning: overriding commands for target `clean-bcheck'
Makefile:869: warning: ignoring old commands for target `clean-bcheck'
Makefile:911: warning: overriding commands for target `bcheck-am'
Makefile:874: warning: ignoring old commands for target `bcheck-am'
Making all in src
make[2]: Entering directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1/src'
Making all in pics
make[3]: Entering directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1/src/pics'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1/src/pics'
make[3]: Entering directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/src/pics -I/opt/kde/include -I/opt/qt/include -I. -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -MT editaddmul.o -MD -MP -MF ".deps/editaddmul.Tpo" -c -o editaddmul.o editaddmul.cpp; \
then mv -f ".deps/editaddmul.Tpo" ".deps/editaddmul.Po"; else rm -f ".deps/editaddmul.Tpo"; exit 1; fi
In file included from /opt/qt/include/qvariant.h:42,
from _editaddmul.h:13,
from editaddmul.h:3,
from editaddmul.cpp:1:
/opt/qt/include/qstring.h: In member function 'char QChar::latin1() const':
/opt/qt/include/qstring.h:194: warning: conversion to 'char' from 'int' may alter its value
/opt/qt/include/qstring.h: In member function 'void QChar::setCell(uchar)':
/opt/qt/include/qstring.h:219: warning: conversion to 'ushort' from 'int' may alter its value
/opt/qt/include/qstring.h: In member function 'void QChar::setRow(uchar)':
/opt/qt/include/qstring.h:220: warning: conversion to 'ushort' from 'int' may alter its value
/opt/qt/include/qstring.h: In constructor 'QChar::QChar(uchar, uchar)':
/opt/qt/include/qstring.h:264: warning: conversion to 'ushort' from 'int' may alter its value
/opt/qt/include/qstring.h: In constructor 'QStringData::QStringData(QChar*, uint, uint)':
/opt/qt/include/qstring.h:362: warning: conversion to 'unsigned int:30' from 'uint' may alter its value
/opt/qt/include/qstring.h:362: warning: conversion to 'unsigned int:30' from 'uint' may alter its value
In file included from /opt/qt/include/qobject.h:45,
from /opt/qt/include/qwidget.h:43,
from /opt/qt/include/qdialog.h:42,
from _editaddmul.h:14,
from editaddmul.h:3,
from editaddmul.cpp:1:
/opt/qt/include/qevent.h: In member function 'void QDropEvent::setAction(QDropEvent::Action)':
/opt/qt/include/qevent.h:520: warning: conversion to 'unsigned char' from 'uint' may alter its value
In file included from /opt/qt/include/qwidget.h:49,
from /opt/qt/include/qdialog.h:42,
from _editaddmul.h:14,
from editaddmul.h:3,
from editaddmul.cpp:1:
/opt/qt/include/qsizepolicy.h: In member function 'void QSizePolicy::transpose()':
/opt/qt/include/qsizepolicy.h:122: warning: conversion to 'uchar' from 'uint' may alter its value
/opt/qt/include/qsizepolicy.h:122: warning: conversion to 'uchar' from 'uint' may alter its value
editaddmul.cpp: In member function 'virtual void EditAddMul::OkSlot()':
editaddmul.cpp:52: error: 'atof' was not declared in this scope
editaddmul.cpp:54: error: 'atof' was not declared in this scope
make[3]: *** [editaddmul.o] Error 1
make[3]: Leaving directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/link/Docs/Builds/Astro/skylendar-1.7.1'
make: *** [all] Error 2

I happened to see your question on linuxquestions, and they're probably right about gcc 4.3 being the problem. You should mail the author (off the app in question) and tell him to update the "include statements" to comply with gcc 4.3

Why I keep getting errors when I try to create my labview application as Active Server in my VB code? (Activex component can't create object)

Error happens at the statement "CreateObject("myapp.Application")

I am not quite clear about your question but my best guess is that you have not register your LV ActiveX Object. Try to run that LV object once to register.
tc phan

Getting error when trying to extend standard VO with transient attributes

Hello,
I am trying to extend the standard VO ReqSummaryVO in iprocurement module and getting the error "Each Row in the Query Result Columns must be mapped to a unique Query Attribute in the mapped entity columns" at step 4. This VO has a lot of transient attributes. I have gone through solutions from other threads related to this error but none of them worked for me. Can someone help me on this please?
Thanks,
Girish.

Hello,
I am trying to extend the standard VO ReqSummaryVO in iprocurement module and getting the error "Each Row in the Query Result Columns must be mapped to a unique Query Attribute in the mapped entity columns" at step 4. This VO has a lot of transient attributes. I have gone through solutions from other threads related to this error but none of them worked for me. Can someone help me on this please?
Thanks,
Girish.

Error when trying to edge-trigger to a input voltage smaller 300mVpp

The programm shown in a cut below (just a cut of it) reads multiple channels from the PXI5105. The program allows to choose between different triggers. When I choose edge-triggering and the value of the input voltage I am triggering to is smaller than 300 mVpp the program stops and sets an error. With the 'Highlight function' I found out that the error is set at the '1D WDT'-vi.
The error message:
ERROR
"Possible reason(s):
Driver Status: (Hex
0xBFFA4009)
A previous acquisition is still in progress. If you are
attempting to change an attribute, note you can only change fetch attributes
while an acquisition is still in progress.
Status Code: -1074118647
I guess, if the voltage gain isn`t high enough the '1D WDT'-vi waits the 'timeout' = 5s for the trigger, isn`able to get one, and stops. But what can I do to trigger to smaller voltages as 300 mVpp? There is no option to change it. The trigger level of the 'Analog Edge Ref Trigger' is set to 0.
Attachments:
error1.jpg ‏120 KB

Well then that's not it.
Not triggering at low voltages- can be caused by either scale too high
(so that 1 bit is bigger than the trigger level, not the case here) or
scale too low (because of saturation the acquired signal never reaches
the trigger level).

Getting error when record type is used

Hi Experts,
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
IS
TYPE emp_record IS RECORD
(empno emp.empno%TYPE,
ename emp.ename%TYPE,
sal emp.sal%TYPE);
TYPE emp_type is TABLE OF emp_record INDEX BY binary_integer;
PROCEDURE EMP_PROC;
PROCEDURE sal_update_PROC
(    p_rule in emp_type
     , p_deptno in number
     , p_job in number
END;
CREATE OR REPLACE PACKAGE BODY emp_details_proc
IS
PROCEDURE EMP_PROC
IS
    V_DEPTNO NUMBER := 10;
    V_JOB VARCHAR2(20):='CLERK';
BEGIN
for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
         loop
              sal_update_PROC
              ( p_rule => rc
                , p_deptno => V_DEPTNO
                , p_job =>V_JOB
end loop;
EXCEPTION
     WHEN OTHERS THEN
DBMS_output.put_line(SQLERRM);
END;
PROCEDURE sal_update_PROC
(    p_rule in emp_type
     , p_deptno in number
     , p_job in number
IS
    V_ename VARCHAR2(20);
    V_SAL NUMBER;
BEGIN
      V_ename := p_rule.ename;
      V_sal := p_rule.sal;
        IF V_sal <=3000 THEN
        UPDATE EMP SET sal=sal+v_sal*10 WHERE ename=v_ename;
        commit;
      END IF;
dbms_output.put_line(v_ename||'   '||v_sal);
      END;
      END;
Instead of this
SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno;
PROCEDURE sal_update_PROC
(    p_rule in emp_type
     , p_deptno in number
     , p_job in number
If I use
SELECT * FROM emp where deptno =v_deptno
PROCEDURE sal_update_PROC
(    p_rule in emp%ROWTYPE
     , p_deptno in number
     , p_job in number
I am not getting any error.
Please help me.Why I am getting error what is wrong in my code.
Thanks in advance.

for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
         loop
              sal_update_PROC
              ( p_rule => rc
                , p_deptno => V_DEPTNO
                , p_job =>V_JOB
p_rule => rc       --> What exactly in rc? It's just a counter. You are using this (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)query but not using a single value returned from this query in the code.
Ishan

TS3694 Why am I getting error code 3194 when i try to restore my ipod?

Why am I getting error code 3194 when I try to restore my ipod touch 4th generation

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
http://support.apple.com/kb/TS3694#error3194
Also see:
iPhone Error 3194 - How to Fix iTunes Error 3194?

Why do I get error 150:30 when I try and send a photo to Elements 8?

Why do I get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?

My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
Turn off your phone and then turn it back on.
Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
John

Why am i getting error 150;30 when i click on edit

Why am i getting error code 150:30 when I click on edit in Photoshop Elements 8. Says my licencing has stopped working.

Exactly, and if using IE the error code doesn't appear and the media with play straight away, so it does seem to be directly related to Firefox...

Why do I get error due to lack of cashe memory when uploading a web gallery?

I have already uploaded several galleries without any issues using the same template. Now have recieced this message for several different collection. I have increased the avilable cache meomry in the setting and restarted the computer.
I have changed template using LR6.
This is in Swedish but the message says; The export was not completed correctly
JPEG - files were created with best available pixel data in image cache memory

> Why do i get "error #3: "E:\lv45\mgsource\memory.c at line 515" when i
> call a dll from labview? one of the inputs is a cluster whisch i set
> to adapt to type input.
>
This happens when one of the elements of the cluster has been
overwritten. Look closely at any strings or other variable elements in
the cluster. It is important that the buffer be allocated to the size
expected by the DLL before it is called.
Greg McKaskle

Why do I get errors when I use pre-trigger scans with a relatively small number of samples?

Similar Messages

Maybe you are looking for