Why does it do this when i upload ?

Trying to upload site to Streamline.net through Dreamweaver I tried uploading the whole site, but was told to upload smaller files at a time. So i connect with server and click "put" it uploads for 10 seconds and then i get the message "connection to server is lost or waiting for server ?" I have another site on same server and using same settings i upload the full site and no problems, so why does it only let me upload 10 seconds of files then locks up and refuses to let me up load anymore ? Seems like i have to wait for a while and then it lets me upload another bit ? Phoned Streamline (server) and they said its all ok at there end ? thanks

Can you upload files to your server using a dedicated FTP app like Cute FTP, Filezilla or WS_ftp pro?
In your remote site log-in settings, try toggline Passive On/Off.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Similar Messages

HT3728 Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

On the older version of the AE you can still use older airport utility.
But once you load the new one you cannot easily go back.. you can load an older 5.6 version though.. instructions below.
For 6.3 you need to run ipv6 local link.
see http://support.apple.com/kb/TS4597
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.

When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.
It only seems to do this since an iphone download last year.......its driving me mad !

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
When associating a device with an Apple ID see the following regarding the 90 day limit.

When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

Question
why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

See also "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Why does phone say "this device not supported" when charging

why does phone say "this device not supported" when charging?

If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.

When using office for mac or i studio after inserting several pictures, my computer locks up and the only way I can fix it is to do a force quit. Why does it do this and how I I get it fixed without a force quit?

I have a mac book, with office for mac and iStudio installed. When I try to create a document using either one of these; after inserting several photos, the computer locks up and the only way I can get it to unlock is to do a force quit. Why does it do this, and how can I get it to unlock without having to do a force quit?

Are you using versions of the software that are compatible with the version of OS X you have installed? Very often such lockups are caused by application incompatibility.
The problem may also come from trying to use both sets of applications at the same time while not having enough RAM installed. Adding more RAM may fix the problem.
The problem can arise from corrupted support files such as preference files or Application Support files or corrupted cache files.
The image files you are using may also be corrupt thus causing the problem.
You might start with:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

Weird Behavior. Why does Safari do this?

Please, can someone explain to me why Safari (1.3.2) hops tabs? I click a link in one tab and instead of going forward to that link, replacing this tab's contents, it jumps (not all the time but usually) to a different open tab and replaces what was there. Unless I hold the command key before clicking a link. WHY does it do this?
Any help will be greatlt appreciated. I'm about to move on to Firefox because of this weird behavior.

So I figured I would switch to flickr for photos.
Safari won't even upload in Safari!!!!
I Choose the photo. And that's it. Safari will not go to the next step in flickr either.
Both photobucket and flickr work and upload photos fine using FIREFOX.
God I'm just so tired of Apple stuff not working.

Why does Photoshop CC crash when I try to load a plug-in using Adobe Exchange?

Why does Photoshop CC crash when I try to load a plug-in using Adobe Exchange?

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/photoshop

Why does idisc quit unexpectedly when trying to burn a disk?

Why does idisc quit unexpectedly when trying to burn a disk?

Since iDisk is an online service for keeping your data and has nothing to do with burning CDs or DVDs, you must be thinking of something else. What application are you using to burn? the Finder? iTunes? iDVD? Toast? Or something else?
Is there an error message that appears when this occurs?
Let us know, we'll keep working with you.

Why does iMovie quit unexpectedly when I try to share in iDVD?

Why does iMovie quit unexpectedly when I try to share in iDVD?

I don't know why it happens, but if you read messages around the iMovie Discussion Group it seems to happen to a lot of people. The easiest way around this is to Share to Media Browser instead of Share to iDVD directly. The Media Browser is a 'holding area' for video you want to use in other iLife Apps (including GarageBand and iDVD). When you Share to Media Browser, choose the Large size. Then let it run until it finishes. Quit iMovie.
Open iDVD. Create a New Project, Select a Theme. Then click on the Media Button. Click on the Movies button below the Media Browser. Your project will now appear under the iMovie star icon just drag that project into the iDVD project window. This should bypass the problem you were having by sharing Directly to iDVD.

Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)

I have an eps file that opens incorrect in Illustrator (CS6, CS4, 10 I tested). I wonder why this happens. The path seems to be complex, but Photoshop and Distiller converts/opens this file correct. So this seems to be a bug in Illustrator. I ca send you the file.
How can this be solved?
Patrick.

Please explain me where I can put my file? Can I email it to you? Can I upload this to this forum?
Patrick.
Date: Wed, 18 Dec 2013 08:24:05 -0800
From: [email protected]
To: [email protected]
Subject: Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)
    Re: Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)
    created by tonyharmer in Illustrator - View the full discussion
Hi Patrick
Pop a link to the file up and let's have a look.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5941529#5941529
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5941529#5941529
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5941529#5941529. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Combobox in array--why does it work this way?

I have attached a snippet of a subVI I'm using to initialize the items and set the values of comboboxes in an array. I modified it slightly so the array being referenced is on this block diagram, not a top level diagram. It took me a while to come to this solution; before I had the combobox part in a for loop and was trying to loop through each array element, get a reference to that element, and set the strings[] and value properties but it was acting all wacky. Then I changed it to the way below and it automatically populates all the comboboxes with the correct values, and then sets their values each to be different (which is what I want!) My question is, why does it work this way? I understand all elements in an array need to be the same (although I did find a work around here.), but the part about setting the values to each be different I was trying to do manually with a property node and a value property, when I realized the combobox just handles it all itself. Is this just a feature of a combobox in an array I need to note for future reference?
edit: I noticed the testers array reference label changed, so hopefully it's still referencing the same control. You may need to relink it.
CLA, LabVIEW Versions 2010-2013
Attachments:
combobox in array snippet.png ‏29 KB

nathand wrote:
Ben wrote:
nathand wrote:
You cannot get a reference to an individual element in an array control. The ArrayElem reference will always refer to the same control regardless of what array index is visible. This isn't specific to a combo-box, every array works like this.
I have not tested it lately but as of the time of this Nugget I found that it will point to the top left visable array element.
The ArrayElem property always returns the same reference no matter which element of the array is in the top-left corner, as demonstrated by the code below (screenshot instead of snippet to avoid mangled references and property nodes).
Yes that is true but the value returned when using a property node >>> value will return the top left displayed value. In the code included in that Nugget, I set the size of the control such that it only shows a single element then by manipulating the index control I can raed each element in the array.
At least that is how it behaved back in the day of that nugget.
Yes, my wife left me home alone with a case of beer and LV to find that tidbit. I suspect that feature will one day disapear without anyone noticing.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I keep getting calls, so I added that number to my list of calls to block. It doesn't ring anymore, but I keep getting notification messages that say "Call back". Why do I receive this when the call should be blocked?

I keep getting calls from (removed), so I added that number to my list of calls to block. It doesn't ring anymore, but I keep getting notification messages that say "Call back (removed)". Why do I receive this when the call should be blocked?
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Okay, you are correct the call is not supposed to ring in. Have you done any troubleshooting on the phone? First off, try power cycling the phone. Turn the phone off, then back on again. If that does not work, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. See if that changes things. Is the caller using the exact number that you blocked, or is it possible they are using another number, or have restricted the Caller ID?

Why does it do this when i upload ?

Similar Messages

Maybe you are looking for