Why is there several seconds of black running time at the end of the videos I am producing in Final Cut Pro X? There is no gap or effect ant the end of the project.
At the end of some of my projects the cursor runs over the end of the project for app. 3 seconds. When rendering the project Final Cut Pro X adds app. 3 seconds of black to the video. There is no effect or gap or something else at the end of the project.
OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help.
Similar Messages
-
Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?
OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help. -
I have put several clips with transitions into the timeline in final cut pro X. There are two separate clips which are followed by transitions which do not play at the right speed. I'm at a loss as to why this is happening - any thoughts/help?
The two HD clips were purchased from itunes (MPEG - 4) and converted to .mov for use in Final Cut Pro. Project properties - 720p HD 1280x720 (60p)
Is this enough information? -
Quicktime 7.5 and Final Cut Pro is there a problem?
Quicktime 7.5 and Final Cut Pro is there a problem with this version of Quicktime?
i cant capture at all now! I can control my camera but no capture or footage in the window?
I can capture using IMovie fine!Alister, there's no problem with it on my Mac, nor none that I know of ... I think you must have an install specific issue.
Check your camera setting matches your currently chosen Easy Setup ... in fact, close the Log and Capture window, then go ahead and re-choose the appropriate Easy Setup for your camera and I/O hardware, then choose View menu > Refresh A/V Devices, and then reopen Log and Capture ...
... still no go? if not then post pack with complete details of your hardware and software, your camera, the recording format, any I/O equipment that is in the mix etc. -
can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???
Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
Russ -
I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?
You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck! -
I am trying to import scanned illustrations into Final Cut Pro (6) as layered photoshop images, however when I try and animate the image is blurred.....please help! Will I need to create the photoshop files as a certain size/resolution? I am working to 4:3.....
You should take your question to the Final Cut Studio forum. This is FCPX.
-
I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?
As Tom said the FCS forum is the better place to post the question.
Here is Apple's best practices doc for installing both on the same system.
BTW, FCP7 is part of the FCS 3 suite of apps.
Russ -
Is there a video noise reduction facility on final cut pro x?
İs there a video noise reduction facility or plugin on final cut pro x?
I appreciate this is an old thread and things have moved on but...
I have just been given a whole load of GoPro footage to work with that is very noisey (video noise) and needs some work.
FCP X still doesn't seem to like 'Neat Video' which works well (at times) but apart from the hang-ups takes a lifetime to render. The 'FxFactory' module isn't really doing it for me... Has anyone tried the 'Pixel Studios' plug in contained in their ProLens offering?
Thanks -
Final Cut Pro X 10.0.8. How to automatically move clips to the left?
I've upgraded to Final Cut Pro X 10.0.8, and there are differences from the earlier ones. How do I set my timeline to automatically move the clips along to the left when I delete a clip in the middle of my timeline?
I can't find an answer to this question anywhere?The backward delete key should do that, The foorward delete key will insert a gap clip.
Russ -
Can the OS X Mountain Lion be used to support Final Cut Pro 7?
Can I install the OS X Mountain Lion and still run
Final Cut Pro 7?System Requirements:
Mac computer with an Intel processor
1GB of RAM (2GB of RAM recommended when working with compressed HD and uncompressed SD sources; 4GB of RAM recommended when working with uncompressed HD sources)
ATI or NVIDIA graphics processor. Integrated Intel graphics processors are not supported except the Intel HD Graphics 3000.
128MB of VRAM
Display with 1280-by-800 resolution or higher
Mac OS X v10.5.6 or later
QuickTime 7.6 or later
DVD drive for installation
For burning Blu-ray discs: a Blu-ray recorder
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I need more space on my hardrive to install final cut pro. What is the easiest way to identify large files that I can move to an external hard drive?
See my FAQ*:
http://www.macmaps.com/diskfull.html -
I am having major issues with the new version of Final Cut x, I have missing clips and my computer is locking up, I need to finish some projects so is there away to go back to the last version before the new update?
Not unless you have saved a copy of the previous version; also, any libraries that you have updated to use in the newer version will not be usable in the older version anyway.
Rather than going back you should try and figure out what is wrong. The current version works great for most users. Start by clearing your preferences: hold down command and option keys while starting FCP X, and confirm when asked. Many different issues can often be solved by just that.
In case it doesn't solve, please provide more detailed information like OS version, Ram, drive and connection, etc -
There is no video preview when using a Final Cut Pro X project as my source.
When I send my FCPX project to Compressor 4 there is no video preview in the preview window. I have the source selected from the dropdown preview settings but the screen is black with no sound, even though the timecode is correct. Any suggestions? Thanks in advance.
If you export (command e) as a QT movie, then bring that into Compressor as the source file, can you preview it?
Russ -
What is the appropriate .tif file size for 1080p Movies in Final Cut Pro?
Doing pans and moves on stills for projected show 1080. What size should I order my final still images? and is it also 72dpi? thanks
FCP can handle images up to 4000x4000 pixels.
Still, it's best to keep the images as close to the video resolution as possible as this reduces the overhead of the program used to dynamically resize. In addition, FCP is not the most sophisticated app for resizing images - Photoshop will do a better job.
Good luck,
x
Maybe you are looking for
-
Hi there, I am working in the QM module for more than a year & now I am thinking of going for QM certification ........Can any one pls tell me what is the overall certification fees of the exam ...... & from where I can get the detail
-
If my company email on my ipad blocks me from manually backing up to icloud, does this mean that icloud is being blocked from my ipad completely?
-
Hi, Can anybody tell me how iPlanet Messaging Server generates te message ids? I would like to know because I want to estimate the number of messages handled by the server by looking at the msg ids (I do not have access to the logs :-( Example: Msg-i
-
Problems with integrated camera of lenovo 3000 v100
A have a problem with the camera of my notebook, when I open the camera the image that it show me in the screen of the notebook it's a many colors, the light afects the image and it apears to be green an some metalic colors. I already tryed to instal
-
I forgot my four digit pin. My I pad is disabled.