Why it should be so hard?

Why every time I want to align components to the middle it never woks or takes a couple of days (or more) to get it? Here is a simplified code:
<mx:VBox textAlign="center" width="50%" height="100%"
paddingTop="10" paddingBottom="0" horizontalGap="0" horizontalAlign="center">
<mx:Form width="100%" backgroundColor="#D2D3CF" borderStyle="solid" height="50%" textAlign="center">
<mx:FormHeading label="Preview Law Label"/>
</mx:Form>
where formheading is not positioned to the middle. It is shown more to the right. There are outer containers as well, but I cannot remove everything every time it's not working. I need to know the mechanics. Can someone educate me please?
Thanks

if you want to see the label in the middle of the browser window??
set VBox width="100%".
if this is not you are looking, please let me know.
Thanks

Similar Messages

Why I should upgrade to CS4?

Adobe have not yet fix AI CS3. Problems with Stroke thickness, Problems when re-sizing after using the Mesh tool, No Preview Icons, Color Pallets, Crashing after placing TIF files, etc., etc., etc.
Where is the patch to fix for all these problems. Let's face it, CS 2 works a lot better than CS3.
So can any one tell me why I have to waste money in another version from Adobe that may contain bugs and they wont even care to address them? Why I should trust Adobe? And when a patch for CS3 is going to be release?

First the Mesh problem and the free transform tool issue is gone. The extra points for outline stroke is gone and the installers work pretty well. Not only that in the past if you had the current version of the suites ind=stalled you could not install an older version you first had to install the older version and then the newer version. That seems to be gone as I had problem loading the ID CS3 app while I already had the CS 4 version installed with the Master collection. The big problem that seems to be solved with the installers is to uninstall one app and then reinstall just that one problems actually works quite well now.
The only problem I encountered was uninstall PPro and then when reinstalling I got an error about updating a font, whoever that did not seem to rely effect the install which seems complete.
For Illustrator a lot of bugs where fixed although many of them did not effect me. There is however a couple of bugs that seemed to be introduced. One is really minor and the other could be a problem and a big head ache.
Here are the two bugs I did not discover them they are posted elsewhere, though one is minor they are both annoying and make life difficult.
The minor one first.
If you give you text optical kerning and then go to manually change the factor you will notice in the character panel the number in the kerning input field has parenthesis if you forget to delete the parenthesis and enter a new number and hit return you'll get an error message which you cannot be dismissed. You will have to force quit.
Only happens with Optical selected. And if you select the number and the parenthesis and enter a number al will be well.
The other bug is more annoying and hopefully can be corrected in an update. Justified text, place the cursor near the end of a line which is not the end of a paragraph and hit the shift return key, the soft return will be record as such but the behavior will look like a hard break as the line will not redraw as justified.
This is a though bug to live with. In ID this works as expected.

Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
Ed

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

Cannot boot into Windows XP, should I replace hard drive?

THE PROBLEM: I have not been able to boot into or use Windows XP (SP2) for almost 3 years. I have been using Linux instead for 3 years and am using it now. The Windows Recovery process only half works, it works up until you have to boot up the computer from the hard drive. Then it no longer works. The computer will load the files from the TOSHIBA Recovery and Applications/Drivers DVD that came new with the computer onto the hard drive. But when you get to the point of booting off the hard drive, with newly added Windows & Toshiba files, nothing happens. It does not boot up into Windows XP. In fact I can see the newly added Windows & Toshiba fileson the hard drive when I boot into Linux (Live) off the hard drive.
THE HARD DRIVE (Specs below): I ran a SMART Data check using a Linux (Ubuntu) Disk utility on the hard drive and it passed everything except for Reallocated Sector Count. There are 20 bad sectors. I called the Toshiba 800 # on the DVD and they told me that the problem may be the hard drive. A new TOSHIBA Recovery and Applications/Drivers DVD costs $40. Toshiba also said there is no Windows XP Recovery Console on the DVD.
CAUSE OF THE PROBLEM: I think, and TOSHIBA agreed it is either the hard drive or corrupteD files on the TOSHIBA Recovery and Applications/Drivers DVD
POSSIBLE SOLUTIONS: I have found a couple of sites that seem to have instructions for making a Windows XP Recovery Console CD. And I have thought I might try to run some Windows XP Recovery Console commands from such a CD, such as fixboot, fixmbr, etc. The try to see if I can boot into Windows XP from the hard drive. If I can, then that might suggest he problem is corrupted files on the TOSHIBA Recovery and Applications/Drivers DVD. If I still cannot boot into Windows, then maybe I should replace the hard drive. This should be very easy to do.
QUESTION(S): Does anybody have any comments or suggestions? Does my approach sound good? Do you have any other suggestions?
I have a TOSHIBA Satellite L25 S1216 that I bought new in early 2006. It has a 40 GB (5400 RPM) Enhanced IDE (ATA-6) 9.5 mm height hard disk drive in it. User removable, i.e., it is easy to replace.
Thank you,
Bob
Solved!
Go to Solution.

My plan is to try to use the TOSHIBA Recovery and Applications/Drivers DVD to load the WIndows XP files onto the hard drive, then use the Windows XP Recovery console CD I downloaded from here
http://www.proposedsolution.com/downloads/download-windows-recovery-console/
by using commmands such as fxmbr, fixboot, etc to see if I can get the computer to boot up into Windows XP.
Good plan, Bob!
Description of the Windows XP Recovery Console for advanced users
A backup plan would be to obtain a Windows XP installation CD from eBay or wherever. They are super cheap now. Then you could install Windows clean and add the drivers and utilities from the website here. Or you could use it to repair-install Windows.
How to Perform a Windows XP Repair Install
You are entitled to activate Home Edition for free. I understand that even after Microsoft no longer supports Windows XP (in April), they will honor activation attempts.
I wouldn't mess with SSDs. And stick with IDE PATA drives. You won't need to worry about advanced-format technology since that didn't come along until the very recent SATA drives. Your BIOS should support 120GB (KB303013). Some here.
-Jerry

Why I should enter my credit card details if I just want to get free application?

Starting from last month I am unable to download any free application which contains in app purchase service.
Why I should enter my credit card details if I just want to get free application? I am close to go to Android

I see, prepaid card is good solution but I don't want to share my card details at all. I can't download any
application during a month due to this new feature with credit card verification and I am really close to switch
to Nexus and go with Google. I don't want to do it but Apple forces me.

Why we should give currency type 30 in 2nd local currency ?

Hi,
why we should give currency type 30 2nd local currency in Define Currencies of Leading Ledger. Here 30 indicates EUR only. I want to give USD as 2nd local currency.
Please suggest.
Thanks,
Gangaraju

Group currency is unique at client level, i.e. this is same for all company codes.
go to scc4
Check the currency of your client.
This currency comes by default for group currency and you can't give as your own.
If you have any requirement, then you can give it as third local currency.
Also remember third local currency you have to maintain at first country level.
Rgds
Murali. N

Any reason why I should use Safari on my PC

I use Mozilla now. I now have an Iphone. Is there any reason why I should download and use Safari on my PC? I expect the functions will be different from IE or Mozilla or maybe better, but is it a good idea to download and use since I have an Iphone?

It's pretty irrelevant, unless you really want to sync bookmarks from your computer to your iPhone (you could do that with IE as well, but not Firefox).

Why we should use Macros if we have function Module

Why we should use Macros if we have function Module and what is the Advantage of Macros than function Module
Moderator Message: Interview-type questions are not allowed.
Edited by: kishan P on Oct 7, 2010 2:22 PM

Put it this way... if you have blueprints for a car you wouldn't want to produce only one car, would you? You would want to produce as many as needed. In another example, you don't want to be able to use only 1 window in Windows. Each window has common features but have different values. That's the purpose of non-static entities
However, there are instances that you want to have only one value for something. That's when you use static entities.
Get it? =)

Why am i having a hard time downloading adobe flash player or reader

Why am i having a hard time downloading an adobe reader or adobe flash player. what am i doing wrong. help. and thank you.

Uninstall Flash.
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
Reinstall Adobe Flash.
http://get.adobe.com/flashplayer/
Security turned on?
System Preferences > Security
Select App store & identified developers

ORA-06508,ORA-06512, why I should re-connect and after that it runs well?

I have 2 package.
package A depends on B.
I call the package A in c++ code. At the begining, all work well.
I compile package B successfully.
But when I call package A in c++ code using a existing connection to the oracle, I get
ORA-06508: PL/SQL:
ORA-06512: 在 "PARTY.PKG_TRANSACTION", line 102
ORA-06512: 在 "PARTY.PKG_CFMMC", line 1186
when I kill this session in database server side and re-connect to the database, it runs well.
what is wrong, why I should re-connect and then it runs well, and in the mean time, it does raise errors above if I use the old connection?

It appears sometimes. But sometimes it does not appear.
you can create 2 package.
package a, package b.
A depends on b.
You can call the package A in the client side using c++ code.
then compile the b(do not change and code of b, just recompile it) successfully.
If you are lucky you can see the errors.

Why we should use Statis entities?

If we can access Static entities directly without creating instances, then why we should use None-Static entities? None Static entities are occupying resources too.
Is there any disadvantage of Static entities?

Put it this way... if you have blueprints for a car you wouldn't want to produce only one car, would you? You would want to produce as many as needed. In another example, you don't want to be able to use only 1 window in Windows. Each window has common features but have different values. That's the purpose of non-static entities
However, there are instances that you want to have only one value for something. That's when you use static entities.
Get it? =)

Should Hp Laptop Hard Disk set to never be inactive?

Hi i was wondering whether i should set my hard drive to never be inactive due to everytime there is a spin-up operation on the disk, there is more stress placed on the HDD.
I would like to know whether i should t set my HDD to never be inactive and what would be the effects of doing so on the HDD and the system as a whole.
Thank you!

If you set it to never be inactive there will also be stress. I am thinking you mean should you set power properties to "never" for the hard drive shutdown? I say no....you might want to sleep or hibernate or just rest a bit. The spinup operation does cause stress but so does staying on in standby. Would you leave the car running in the garage all the time to avoid ever having to start it up cold? Same idea.

Why won't my external hard drive show up anywhere? Something wrong abt NTFS.

Why won't my external hard drive show up anywhere? Something wrong abt NTFS. After my OS turn to OS X Lion, this problem occur. I couldn't solve it, anybody?

It doesn't make sense.
Anyway, I found the solutions. Download software for solving this problem.
Here is the link:
http://www.macupdate.com/app/mac/24481/ntfs-3g

Why do my two external hard drives require "ejection" prior to shutdown?

Why do my two external hard drives require "ejection" upon shutdown?

Problem solved. I had plugged in my external hard drives into a USB card. I switched my two printers to the USB card and plugged in the two hard drives into the computer's USB outlets and now NO improper eject messages. What a relief!!! Thanks again.

Why it should be so hard?

Similar Messages

Maybe you are looking for