Why no interface mapping?

Hi Xier,
Secnario as following:
1. JDBC sender send message to BPM.
2. BPM call Sync ABAP Proxy
3. BPM get proxy response
4. BPM use JDBC receiver write data back to DB.
So we need to define interface Determination for step 1.
we input Inbound Interface, but the interface mapping is optional, which show "Not Specified" in Receiver determination.
My question is why here don't need to input interface mapping, this interface mapping should transform JDBC sender interface structure to BPM's abstract interface structure. Why it's not mandatory?

Hi,
Since the Message type of both the Inbound Interface and the Abstract Interface are same it is not mandatory to do mapping explecitly.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

Similar Messages

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Interface mapping in BPM

hey guys
i was just wondering why in a BPM scenario we have to do interface mapping between outbound(or inbound) and abstract interface,whereas in a regular scenario(without BPM) we do it between outbound and inbound interfaces?is it just because BPM only understands abstract interface?
thanx
ahmad

Hi,
It is receiver Data Type , Since in this scenerio the sender is IDOC and recevier is Flat file , We have declare the data type . for sender we are importing the IDOC..for receiver we have declare the data type.
>>DT_S47,DT_S68 etc and then she is using them in the 'Type' field. --YES in receiver side.
Regards
Agasthuri Doss

Without BPM:Call RFC using JCO in interface mapping using java mapping

Hi all
I have a very small scenario where REQUEST from the customer comes via Web Service all i have to do is to read the request using SOAP adapter and call an interface mapping(lets say the name is IM_TEST) inside which there is a JAVA MAPPING program written which will call an RFC in CRM using JCO.
Now this was really simple and i cud test the Interface mapping successfully, but the problem is when loading the scenario in integration directory i have certain things to do
1. to set the SENDER AGREEMENT which i did correctly
2. set the RECEIVER DETERMINATION, INTERFACE DETERMINATION AND RECEIVER AGREEMENT now here i am stuck because there is no receiver in my case as the RFC is called inside the mapping only.
can i call one more message mapping in IM_TEST which will write file onto the XI directory and then in RECEIVER DETERMINATION, INTERFACE DETERMINATION AND RECEIVER AGREEMENT i can mention the reciever as FTP.
I tried it but i gives the following error
Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_TEST_WRITE_FILE: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Parsing an empty source. Root element expected!
Please help me how to complete the scenario so that customer can run it end to end.
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on May 12, 2010 1:44 PM

Stefen
What do i do then...actually this is the project requirement. They want a very fast response from PI and thats why they wnt us to omit BPM and the Graphical mapping from the scenario.
I am able to test the interface mapping which calls the the Java mapping inside which there is an RFC call, but i cannot implement it end - to - end as there is no receiver business system in this case. The only business system i have is the SOAP sender.
I am really troubled now, please help me with a solution.
Is there any other possible way through which the process can become very fast whic hcan meet their requirement.
Regards
Naina

Interface Mapping not supported in the JPA specification?

Are there any plans to add Interface support in the JPA specification? It is not supported by JPA annotations, which seems quite disruptive to proper object oriented design. However, individual implementations of JPA seem to support this:
http://docs.jboss.org/hibernate/stable/core/reference/en/html_single/#inheritance-tableperclass
http://wiki.eclipse.org/Using_EclipseLink_JPA_Extensions_%28ELUG%29#How_to_Use_the_.40VariableOneToOne_Annotation
There is visible interest in getting this implemented at an Annotation level for Hibernate also but the developers for Hibernate point out that this isn't even in the JPA specifications.
http://opensource.atlassian.com/projects/hibernate/browse/ANN-9
https://forum.hibernate.org/viewtopic.php?f=9&t=941363&sid=4abdbc72cbf04380f4a8e2cadd7dfada&start=15
Is this being talked about/in the works for JPA? Why not include @VariableOneToOne in the spec? It would seem to be quite an essential feature for wide adoption.

Hi,
You can only choose the Interface mapping for the Enhanced recevier determination in the extended tab of Receiver determination. & I dont see the Interface mapping in the select list.
Where do I have to check for the proper outbound message???
Regards

BPM Error in Transformation Step: Interface Mapping not found

Hi,
Can you help me on this? I have a tranformation step in my BPM that combines a request and response message of a previous Send step to create a Source message for the next Send step. However, on my transformation step, I got the mapping error in workflow log: Interface mapping http://gl.euhreka.com/learning/skillsoft/catalogSy.YGLXI_OM_MergeRequestAndHandleResponseAB_To_PollFo (SWCV=DF8549309ECE11DFB58DF3570A341E0F) not found
Do you have any idea about this error? My mapping program is working fine. I also checked if the container elements assigned to the transformation steps are correct.
Can you suggest of other way on how can I achieve on merging 2 messages (request and response) and set it to the Request for another send step?
Thanks,
Jenny

Hello,
I already solved the problem. The namespace and Operation mapping name is too long that's why it cannot be located at runtime.
After the rename, another error appeared.
"Incorrect XML format after mapping: Root-Tag expected instead of Messages"
There are no useful information on the trace:
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://test YGLXI_OM_Merge , Software Component Version DF8549309ECE11DFB58DF3570A341E0F</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type XSLT , Program PollForReport_Merge</Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet PollForReport_Merge.xsl.</Trace>
<Trace level="2" type="T">Returned form XSLT processor.</Trace>
</MappingTrace>
Here is myXSLT program:
<?xml version='1.0' encoding='utf-8' ?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
     <xsl:template match="/">
          <YGLXI_MT_PollForReportRequest>
               <customerID>
                    <xsl:value-of select="//customerID"/>
               </customerID>
               <customerPassword>
                    <xsl:value-of select="//customerPassword"/>
               </customerPassword>
               <reportIDHandle>
                    <xsl:value-of select="//reportHandle"/>
               </reportIDHandle>
          </YGLXI_MT_PollForReportRequest>
     </xsl:template>
Here is my source message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:YGLXI_MT_InitiateFullCourseListingRequest xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
         <customerID>ZZZ</customerID>
         <customerPassword>XXX</customerPassword>
         <reportFormat>VVV</reportFormat>
         <mode>VCC</mode>
         <userName>CC</userName>
      </ns1:YGLXI_MT_InitiateFullCourseListingRequest>
   </ns0:Message1>
   <ns0:Message2>
      <ns1:YGLXI_MT_InitiateFullCourseListingResponse xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
         <reportHandle>SADA</reportHandle>
      </ns1:YGLXI_MT_InitiateFullCourseListingResponse>
   </ns0:Message2>
</ns0:Messages>
I tested my program in Operation mapping and it is working. How come it is not in BPM?
Thanks,
Jenny

Interface Mapping not found error

I'm getting "Interface Mapping <name> (SWCV=<id>) not found" error during runtime. I did not do anything to the specified interface mapping. If I go into the repository and put into modify mode, add space to description, save, activate, it all works fine. Any idea why my interface mappings are getting "lost" in the runtime cache... any way to do a bulk reload of repository objects into the runtime cache?

Hi Tadd,
It may help to eliminate the possible erros:
1) In the Runtime Workbench, simulate the message in the Component Monitoring / Adapter Engine. If this does not work:
2) Try to restart the JVM. I have seen sometimes that the mapping functions stored as Java files do not get refreshed.
Cheers,
Bhanu

** Interface Mapping - No Objects Found - IDoc is receiver

Hi Friends,
In our scenario, sender is File & receiver is IDoc. For each record in file, we need to created one IDoc. IDoc is CREMAS.CREMAS05. For this as usual we exported XSD and changed the occurrence of IDOC node as minOccurs="0" maxOccurs="unbounded" (as explained in Michael Blog - 2762) and did the message mapping successfully.
While create Interface Mapping, (Message interface (OB) for File, no message interface for IDoc, we directly use CREMAS.CREMAS05 in the target interface) and 'Read Interfaces' and select the Message Mapping option' it shows 'No Objects Found'. What could be the problem ?
Note that earlier it was working fine (Some times ago), now it is showing this error 'No Objects Found". I am very confused why this error is coming.
Kindly help me friends, to solve this.
Kind regards,
Jegathees P.

Friends,
Thanks for all your reply. When we click Read messages button automaticlly our source message (type) and target message (type) will be selected. Then, we select Mapping Program which is suitable for the Source & Target Message. When we do like this, it is showing the error 'No Objects Found'.
I want to check with you Is this due to what reason ? (Because, earlier it was working fine)
Eventhough we select 'Any' to 'Any' and select the mapping, save. After that If we do consistency check , it will show an warning message about the namespace issue.

Missing Interface mapping in XI Configuration

Hi all,
I am learning the IDOC XI File Scenario using BPM.
In the design part I have created message Interfaces as
Abstract Asyn -
IDOC
inbound Asyn------(Inbound Interface)
Asynch Abstract----
Inbound.
Did the message mapping between IDOC and Abstract Asyn IDOC and
Abstract Asyn IDOC and Asynch Abstract(Inbound).
In the Configuration of XI:
First Reciever Determination
service -SAP system
Interface - IDOC
Reciever -BPM business service
Interface -IDOC abs asyn
Interface mappings - IDOC and Abstract Asyn IDOC
Second Reciever Determination:
service -BPM
Interface -Inbound Abst Asyn
Reciever-business service for File
Interface -inbound Asyn
But the Interface mappings I cannot able to configure it as it is not recognised (No object found error ).
How to solve this?
Need help........!
Thank you.

Hi,
Did you create an Interface mapping between Idoc interface and Inbound interface ?.
if so it will appear over there.
BTW, why are you using BPM here? Are you collecting the idocs ? if so the mapping should come inside the BPM.
If it is a simple Idoc to FIle scenario using BPM then
You need to have one Inbound Aysnc Interface. One Idoc Abstract Interface.
Check this blog for simple case-
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Moorthy

Message mapping crashes only in INterface Mapping

hi guys,
i have an issue with one of my interface mapping. the message mapping crashes when i run the interface mapping. however when i run the message mapping separately it works fine.
any hints?
thanks,
ali.

Hi Ali,
If you are using try catch then in case of catch condition if you pass null to substring it will fail.. Either you call the substring inside your udf (so that you can make sure that the filename is available then only substring is called) else handle the null condition in message mapping before calling substring...
Also you can try looking into the display queue entry for substring in Message Mapping for further analysis. Here also you will not get any filename by dynamic configuration, but i am not sure why it was not failing there.. May be display queue will help you.
Regards
Suraj

Diff b/w msg mapping and interface mapping

hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..

hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How ToHandle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How ToHandle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Use of Orders05 Interface mapping & XSLT mapping file for Orders03 IDOC

Hello Experts,
In a scenario we are sending Purchase orders and Purhase Order change from SAP to SNC through XI.
Currently Orders03 IDoc is used and standard mapping for Orders03 XSLT is used.
Now the requirement is to use the same IDOC (Orders03) but
- XSLT mapping (OrdersOrders05_ReplenishmentOrderNotification) and
- Interface Mapping (OrdersOrders05_ReplenishmentOrderNotification_01) of Orders05.
What changes would be necessary
- On SAP side,
- in the XSLT mapping, and
- On XI side.
Thanks in advance,
Suraj

Hi Suraj,
First compare ORDERS03 IDOC and ORDERS05 IDoc structures,if both structures are same then u no ned to chnage the XSL it will work fine.
If any chnages in ORDERS05 Idoc then u have to adjust XSLT as per ORDERS05 IDOC.
test interface mapping first and let me know if any error.
Regards,
Raj

Interface Mapping run time error...java.lang.nullpointerException thrown

Hi,
I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
Interface Mapping run time error...java.lang.nullpointerException thrown during application mapping.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>CAMEL_BS_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>Camel_BService_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
- <SAP:Mapping notRequired="M">
<SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
<SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
<SAP:SP>-1</SAP:SP>
</SAP:Mapping>
</SAP:Receiver>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
<SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
<SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070108</SAP:Date>
<SAP:Time>224350</SAP:Time>
<SAP:Host>gbdci550</SAP:Host>
<SAP:SystemId>PI7</SAP:SystemId>
<SAP:SystemNr>03</SAP:SystemNr>
<SAP:OS>AIX</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>014</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>002</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
<SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>168</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>67</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
<SAP:Serialize_Children>X</SAP:Serialize_Children>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- 
<Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MainDocument</SAP:Name>
<SAP:Description />
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Please I request to give me some hint how to troubleshoot this issue.
Thanks a lot,
Srujan

Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
Here is the Java exception
Mappage d'interface
Can someone be helpful for that ?
Regards
Laurent
Message was edited by:
Laurent Gitton

ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING

Hi,
We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
Transformer configuration exception occurred when loading XSLT
sorce interface :outbound and asyncronous.
mapping : XSLT mapping (imported as a zip file)
target interface: abstract,asyncronous.
The xslt runs well in standalone and its well formed and there is no name space issue.
please help if any one has faced such a situation while using XSLT mapping.
regards,
Anirban.

Hi Anirban
When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
Regards,
Thorsten

Problem In Interface Mapping

Hi,
I am having an Interface Mapping involving two mapping programs in the following sequence:
1) Message Mapping
2) Java Mapping
There are two Message Interfaces on the source side and one MI on the target side. Now the problem is that only the Java mapping is getting executed not the Message Mapping.
Please note the following points:
1) There is no error while executing the Interface Mapping.
2) The Message Mapping is getting executed perfectly.
Please let me know what could be the possible error.
Thanks,
Abhishek.

Hi Abhishek,
As you said you have two source structure and one target structure.
after executing the first mapping output is not same as the input required by the second mapping.
Also keep in mind that you can not persist the message here so the output of first mapping should not modify the structure. You can anly modify the values.
you can confirm the same with some dummy scenario
Thanks
Sunil Singh

Why no interface mapping?

Similar Messages

Maybe you are looking for