Why Poor DVD quality Encore CS6 with Sony FS100 MTS files from PPro CS6

I am using PPro CS6 on a MAC Pro Quad zenon with Boot Camp. On PC side I was using PPro CS6 & Encore CS6 with MTS files from  Sony NX 5U with NO Problems.
I just started using a Sony FS100 recording 1080i (60) format MTS files. When I Dynamic Link to Encore, the quality of the image is very soft compare to image from previous
projects with MTS files from Sony NX 5U.When I open a previous NX5U project, it still displays and creates an excellant dvd.Need help in solving problem.

Thanks for the advice. I tryed your method with same results.
I then tried changing project quality settings with somewhat better results
but not good enough results.
I looked at some of my previous dvds that used mts files from my Sony NX5U
and the quality was much better
that any results I am having using the Sony FS100 mts files. Even still
pictures do not look good now in Encore.
I then tried using Roxio Creator 10 Pro to make a dvd.
The results were excellant! Video files and stills are great.
I noticed that Encore CS6 is using the "Main Concept" codec to transcode.
Has something changed in the basic
settings with my Encore and can I reset my Encore to original defaults???
Any advice would be welcomed...Thanks again.
Tom

Similar Messages

  • I hate it i am fed up it so diffiuclt Why they make it so difficult with transferring photos contacts data from iphone 5s to pc .!!!!!!!!!!!!!!!!!!!!!!!!!!!

    i hate it i am fed up it so diffiuclt Why they make it so difficult with transferring photos contacts data from iphone 5s to pc .!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hook the phone to the computer, open the Computer icon and look for the iPhone folder. Copy the images. Not difficult at all. Sync your contacts with Outlook through iTunes. Not really so difficult.

  • Direct Link with Sony F55 RAW files

    I'm editing a timeline with Sony RAW F55 files, when I use the new function Direct Link Speedgrade opens but the I get the "Media Offline" error.
    Does Speedgrade supports Sony RAW files?
    Thanks

    I got the same problem with .mov files from a 5d mark III. If you check here: http://blogs.adobe.com/movingcolors/2013/10/31/speedgrade-cc-7-1-update/  you'll see adobe is aware of that issue, but not for my case.

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • I need a definitive answer for using Premiere Pro CS4 to work with .m2ts and .mts files

    I have a Canon Vixia HF20 and a Sony HDR-XR350V.  The Canon gives me .MTS files and the Sony produces .M2TS files.  What do I need to do to be able to work with these files in Premiere Pro?  I've searched and gotten that I'll need to purchase a codec.  But are both file types going to be good with one codec?
    Also, what are the steps to getting started?  Purchase the codec, load the codec...Will there be any other steps to working with the files in Premiere?
    I'm sorry for the basic questions, I'm a photographer!  I've never worked with video before, and this is HARD!
    Thank you for your help,
    Michelle

    Hi, Michelle.
    I'm nowhere near the authority on this stuff that many of the others are here, but I have Premiere Pro CS4 and I work directly with AVCHD .mts files from my Panasonic camera. I simply browse to the directory where the .mts files are located and drag them into the project. I didn't need to purchase any additional codec, this is natively supported in Premiere CS4.
    I can't speak to m2ts files as I don't have any gear that generates them.
    One thing you do need to know, however, and this is important. Whether you're running a Mac or a PC, if you're going to work with high def footage such as AVCHD, you're going to need a fairly high performance computer with sufficient RAM, good performing hard drives and a fast CPU.
    I tried this on a PC that was fine for my recording studio (audio), fine for professional software development, but choked and stuttered working with HD material. That's not a problem with the Adobe software, it's just the nature of the beast. HD is extremely demanding stuff, so you need top flight gear to work with it. I bought a higher performance PC and now it runs just fine.
    Hope this helps,
    Chris

  • Why won't Log and Transfer in FCP7 recognize video files from my SD card? They were shot on a cheepo Aiptek camera.

    Why won't Log and Transfer in FCP7 recognize video files from my SD card? They were shot on a cheepo Aiptek camera.

    David, the camera shoots .mov files. I have the latest version of QuickTime installed but still nothing.
    I teach high school, but I'm reluctant to download FCPX for my students at the moment. I may try it but I really want to stick with what we're using currently, at least for now.
    iMovie started to import files, but very slowly. I guess I'm frustrated that the files shot on the Canons I also use transfer just fine, but the Aiptek camera isn't cooperating.
    Would you suggest using MPEG Streamclip?
    Thanks again in advance.

  • MTS files from Sony slow processing

    I am having a lot of trouble processing .MTS files from a Sony NXCam.
    I do not know what th settings were when the video was shot.
    I put an hour of these video files (00000.MTS,00001.MTS, and 00002.MTS) on the PP timeline.
    I tried ot export the video to any format and the estimated time was 5-7 hours.
    I am not sure which Sequence type to use.

    I have no idea if the change of the file extension (.MTS to .m2ts) has something to do with a change of footage (codec). Don’t think so..
    I just have imported directly (w/o the Sony software) some footage from the Memory card of the cam into PP ( .MTS).
    Works also fine;
    1 minute of footage is exported as "match sequence setting" in 1 minute.
    Export as MPEG2 HDTV in 1 minute.
    Export as .avi in 40 seconds.
    Please check your sequence and export settings.
    I have also tested a (wrong) sequence setting "anamorphic" while my footage is not, and then the export is much longer!
    Please select a file and check under Metadata the video Info:
    1920 x 1080 (1,0) use AVCHD 1080i square pixel as sequence setting.
    1920 x 1080 (1.333) use AVCHD 1080i (1.333) = anamorphic as sequence setting.
    I may mail you the Sony Software, but it installs only with the camcorder connected, will not help.
    Otherwise follow the advices about Benchmark.
    Regards JPB

  • How import mts file from sony nx5 in final cut pro

    how import mts file from sony nx5 in final cut pro

    LOG AND TRANSFER.  I have the full workflow here:
    http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
    Make sure you are running FCP 7.0.3.  That version deals with files from the NX5 the best.  If you are on a previous version, like FCP 6....you will need to use CLIPWRAP2 from Divergentmedia.com.  As the specific AVCHD format the NX5 uses is something that FCP 6 cannot really deal with. 
    Gotta love new camera formats.

  • FCPX 10.1.3 something wrong with audio in .MTS file

    Hi,
    I've just update from FCPX 10.1.1 to 10.1.3.
    I've reported something wrong when i import .MTS files (from my Sony VG30). There are lot of audio paradise. If i listen to the file on another computer there are no problem, but when it was imported in FCPX, it appears. Also with optimised and proxy files.
    If i export a project, the parasite still present.
    If i first rewrap the .MTS files with ClipWrap, then the file imported in FCPX don't have any problem.
    For sure, i don't have that kind of problem in FCPX 10.1.1
    Some other user with that ?

    Yep, i know that method is better, anyway i can't always do that cause i also received directly .MTS file and not the physical SD Card, or should backup the files on a server before import it on my Mac and start the new project.
    I've checkup an imported file i've made with 10.1.1 and played in 10.1.3 and there aren't any bug files, so it's seems to be linked to 10.1.2 or 10.1.3 update : (

  • When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    Does it not play at all or cannot you get the audio in the timeline?
    Did you copy the entire card to the hdd and then imported the file via the Media Browser?
    Did you source patch the audio tracks?

  • Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?

    Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?

    What do "normal" AI prefs mean? AICB or PDF compliant? You might wanna try to turn off the latter....
    Mylenium

  • I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    Here is the direct Adobe page.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • How do I move folders with subfolders (containing pdf files) from my pc to ipad 3 to use in adobe reader

    How do I move folders with subfolders (containing pdf files) from my pc to ipad 3 to use in adobe reader

    You need to connect the ipad to the computer and open itunes.
    Open the ipad and go into settings, icloud. Tap on "Documents and Data" and turn that on to sync to icloud.
    Now go back into itunes and it should pick up your ipad already and tap on the ipad connection. There will pop up some taps on the center screen for sync options. Go thru each one (summary, info, apps, music, tv shows, podcasts, itunesU, books and photos).....you want to click on "Books".
    To the left click the arrow next to the ipad under Devices.
    The arrow will point down and open the sub menu, click on the "Books" sub menu here. You will see in the center window current books, PDF currently on the ipad.
    Next go to the top and click on "File"  (file, edit, view, controls, store, advanced, help) and click on "add folder to library"...... it will bring up your computer file system in a seperate window. File the folder your looking for and add it. This should get the folder set up to sync onto ipad thru itunes.
    For additional ease in doing things on the middle window of itunes click back on summary, scroll a bit and you will see "Backup", click on "Backup to icloud". Then under "Options", check "Sync with this ipad over WiFi".
    This will allow you to wirelessly sync your itunes and your ipad without having the ipad connected to the computer with a cable. You just have to be on the same wireless network.
    If in itunes you add something like a pdf or photo, when your on your ipad open the Ibooks or Iphoto app and it wull update the file system to match your itunes account. The sync with with anything you do in itunes and it works the other way around also. If you save files, photos, books on the ipad, using the ipad (app store purchases, games, books)....the ipad will update to itunes next time your on the same network.
    FYI - both the ipad and the computer have to be on.
    Itunes updates (changes you make thru itunes), does not need itunes to be open for update content to update to the ipad. This is because it updates to the cloud.
    Updates from the ipad to itunes will need itunes open on the computer. So it can sync with the cloud info.

  • Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    ASk in the ID forum and explain better what you actually mean.
    Mylenium

  • Has anyone had issues with poor image quality when using lightroom to process raw images from Canon 7dmk2

    Hi everyone..
    ..I have been having image quality issues when using Lightroom to process raw files from a 7d mk2... They are all soft with poor clarity.....tonight in despair I tried processing them  using  canon's software and they are totally different..."much better"
    anyone else had similar problems....Andy

    I have a 7D2 and have not had what I interpret as poor image quality that has anything to do with the camera.
    Can you post a screenshot of what you’re seeing and what specifically you don’t like?  Maybe there is something you can do differently or at least there may be an explanation for what you’re seeing.
    And if you have a raw image that you wouldn’t mind sharing in a public forum, upload to http://www.dropbox.com/ then post a public share link to it in a reply, here.
    In other words post a screenshot of what you see in LR, another of what you see using DPP, and a link to the raw file you’re processing.

Maybe you are looking for