Will it work with new processor? 1801 error

the system shows the 1801 error (shows more, but this is the only important)
i have a Pentium D 925 installed, but the motherboard only supports 940, 950 and 960 Pentium D processors.
in the screen i press F1 to continue booting
windows (win7 ultimate 64 bit) stays in the "Starting windows" screen and doesn't boot to desktop
will it work with a supported processor?
This question was solved.
View Solution.

Hi,
The xw4300 is designed to work with the following processors:
All processors feature Extended Memeory 64 Technology. All Pentium 4 processors feature Hyper-Threading Technology1.
Intel Pentium 4 processor 520 supporting Hyper-Threading Technology (2.80 GHz/1 MB, 800 MHz FSB, Single Core)
Intel Pentium 4 processor 530 supporting Hyper-Threading Technology (3.0 GHz/ 1 MB, 800 FSB, Single Core)
Intel Pentium 4 processor 640 supporting Hyper-Threading Technology (3.2 GHz/ 2 MB, 800 FSB, Single Core)
Intel Pentium 4 processor 650 supporting Hyper-Threading Technology (3.4 GHz/ 2 MB, 800 FSB, Single Core)
Intel Pentium 4 processor 660 supporting Hyper-Threading Technology (3.6 GHz/ 2 MB, 800 FSB, Single Core)
Intel Pentium 4 processor 670 supporting Hyper-Threading Technology (3.8 GHz/ 2 MB, 800 FSB, Single Core) – Available 2H 2005
Intel Pentium D processor 840 (3.2 GHz/1 MB, 800 FSB, Dual Core) – Available 2H 2005
Source: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00384617
Please only use CPU from the list.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Altec InMotion . . . will it work with newer iPods?

    Got my iPod stolen. I had the old 60 or 80 gig monochrome screen white iPods. try to find them on eBay but it shows every iPod ever made and don't know how to specify the one I have.
    Getting a new one, apart from being unnecessary, is all my peripherals (inMotion speakers and iTalk) and i don't know if they will work with newer iPods.
    On inMotion since that's what I use the most, although the size of the "hole" is big like the older iPods the actual connector seems like it might just fit into the newer iPods. Online Altec says it fits various iPods but I have no way of knowing if it's my same unit they're referring to or a new one.
    Also, if anyone knows how you identify that earlier iPod (bought in 03-04) for eBay searches, I've gone through pages and haven't found a single one like mine.
    thanks
    enzosf

    P.S. It had the track wheel on the bottom and it was either 60 or 80 gigs. Bought in Fall 2004.
    thanks

  • Why o why does my cimputer say uopdayte now to latest Firefox Version and then say add ons like SKYPE etc will not work with new version . I di not understand .o

    as above

    Many add-ons work only with a particular range of Firefox versions. After the upgrade, Firefox will attempt to find new compatible versions. This is not always possible.
    To determine whether an add-on you can't live without has a version for Firefox 11, you can check the [https://addons.mozilla.org/en-US/firefox/ Add-ons site] or try this add-on to make that a little easier (I haven't tried it myself): [https://addons.mozilla.org/en-US/firefox/addon/is-it-compatible/ Is It Compatible? :: Add-ons for Firefox].
    By the way, many recent posts report problems with Skype add-ons, so you might want to research here if you notice any strange copy/paste problems.

  • Will ADB work with new equipment?

    I have a 15 year old Appledesign ADB keyboard that I would like to use with my brand new i5 21.5" iMac running OSX 10.7.2 Lion. Will an ADB to USB adaptor work? I see most of the Adaptors work with older version of OSX like 10.2, but no info on Lion.

    Thanks for the reply,
    I'm hoping one of the geeks here has one laying around and can try it out. The stores haven't stocked them for years. The local store didn't know after asking around for 15 mnutes. I don't want to order one online unless I'm certin it can work.

  • 1st gen ipod touch will not work with new iTunes 11.help!

    1st generation Ipod Touch.  I ran an update on my ITunes on my PC, and my IPOD will no longer connect to my itunes.  Please help.  If at all possible.

    iTunes 11 works with all model iPods.
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    iOS: Device not recognized in iTunes for Windows

  • T42 will not work with new wireless router

    Purchased a new router, works great with my T61 and x200 but not with my  older T42.  The old router worked fine with all 3 thinkpad computers. I am told that the T42 has only an 11mps modemcard inside, and therefore I am out of luck. I have to purchase an external usb modem or slow down the router for the other machines.  Is there nothing I can do with my T42 settings to get onto this new router?  Steve

    Posting the 7-character model number of your T42 would help a lot...
    You can replace the wireless card with a newer bg or abg one, and it should work fine with a newer router.
    For a list of applicable cards, look at this page under number 14:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-46474
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Library Update Fails, Itunes will not work with new 9.0 update

    I just recently updated the Itunes software.
    Since doing it, when I plug my Ipod 180 gig into my computer, or just try to open Itunes, the Library starts to update
    I can do nothing else and then when it finishes, it fails.
    Itunes closes and I am back to square one.
    WHY?!?!?!
    It was fine before I updated. Everything was running smooth.
    This new update is messed up!!
    What do I need to do to fix this issue??
    Elwood

    OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

  • OS X lion USB Thumb Drive - will this work on new Mac Mini or MBA (2011)?

    Hi All,
    Not to be confused with the other similar posts, I am interesting in only clarification of what build comes with the USB Thumb Drive now available on Apple Store - will this work with new MBA and Mac Mini?
    Thanks,

    KeanuReeves wrote:
    From what I have read about the usb installer, it is not intended for you to try booting from the stick after wiping your hard drive. You are to click on the installer
    You may be correct, but this statement is quite confusing in that context:
    Important Note
    When you install OS X Lion using the USB thumb drive, you will not be able to reinstall OS X Lion from Lion Recovery. You will need to use the USB thumb drive to reinstall OS X Lion.
    So, if the Thumb drive is supposed to take the part of the Recovery partition, it seems that it should be able to boot. However, the license agreement still requires an Apple computer running Snow Leopard, so maybe it isn't bootable.

  • ITunes will not work with my computer.  iMac G3 processor, OS 10.4.11

    Original message posted about a week ago - I have an iMac, OS is 10.4.11. I just updated my Quicktime software to 7.5, I also updated my iTunes to 8.2.1 (I think, it is definitely higher than 8.0). When I would open up iTunes. I would get this message. (We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later). This was happening before I did the current downloads. I had no trouble about 3-4 weeks ago. I was able to get into the iTunes store and download song. I am pretty annoyed to say the least. Apple makes it so difficult to get information, unless you do endless searches. Trying to contact customer service is a whole other nightmare. They offer this software for free, yet they want you to pay for everything. As you can imagine, I am not happy and venting is helping. So I am hoping there are some other people out there with similar problems who can help. Nothing has been changed or altered on my computer. I have no problem connecting to the internet. No passwords or ID's have been changed. As mentioned I updated my software to the highest, most current software available that my operating system can handle. So if anyone out there knows what is going on, or can help. Please advise. Thanks, from a very frustrated apple user! You can email me direct too <[email protected]>
    Updated message 12/9/10 - I updated my iTunes version to 9.2.1. Now my iTunes will not open. When I do try to open it, It says that this program will only work with G4, and G5 processors. I don't know what to do. I can't afford a new computer right now. Any suggestions???? PLEASE HELP!!I am so frustrated!!! Thanks for your help.

    OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

    I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

    Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
    You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

  • I have a G5 Power Mac with dual 1.8 processors. I recently upgraded the software fro 10.4.11 to 10.5.8 in order to get an iPad 2. Now my Adobe Photoshop 7 won't work any longer. All the newer Phtoshop versions only work with Intell processors. Does anyone

    ..know of an older Photoshop version that will work with my processors and system 10.5.8?
    Thanks,
    Don

    I believe I had this issue with PS7 when I first upgraded from OS 9 to OS X 10.2 Jaguar.
    Couldn't get PS 7 to launch at all.
    I ended up having to update all of my Adobe apps to the CS edition to be sure every Adobe app functioned without a hitch.
    I am not sure where you'll find older versions of Adobe software, though.
    You could try and contact Adobe direct to see if they have any older versions on disc left in stock or not.
    Short or that I  really do not know.
    PS CS 4 was the last universal version that works with PPC Macs.
    Pixelmator used to be available for 10.5 Leopard, but it's no longer available for PPC Macs, either.
    http://www.pixelmator.com/
    Could contact them to see if they have the older version still available on disc or as a download.
    This is a pay app, also.
    Another pay app that may work for you is Graphic Converter.
    http://www.lemkesoft.com/
    The other options are the ones already mentioned in the previous reply.
    Other than Pixelmator, the other offerings are quite limited compared to PS.
    Here's the link to Seashore.
    http://seashore.sourceforge.net/The_Seashore_Project/About.html
    A free open source Unix replacement for PS is The Gimp
    http://www.gimp.org/macintosh/
    You need to install X11 in order to use this app.
    If you installed 10.5, you'll need to check your Applications folder to see if X11 was installed by default.
    If not you'll need to go back to your OS X 10.5 install discs and do a custom install and just install X11 from disc.
    This will just add the additional program and extensions and will not erase your installation of OS X 10.5.

  • I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
    I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

  • If i bought an iphone from New York, will it work with a moroccan network?

    if i bought an iphone from New York, will it work with a moroccan network?

    If it is locked, yes you will have to unlock it to use with a Moroccan
    wireless network. Only the wireless provider to which an iPhone
    is locked can unlock it.
    If you can get that far, what does it say when you look at Settings+>
    General=>About=>Carrier?

Maybe you are looking for

  • IPod Touch 1st Generation stopped charging and sync.

    Hi, I have an iPod Touch 1st Generation that I bought in november 2007(just when it came to the stores) and now, 4 years lates it started to present some problems, first, it stoped to sync with the iTunes, then my computer(mac and PC) stoped reconizi

  • How we can raise same No of Invoice after Deletion of Particular Invoice

    Dear All,           Pls tell me if i delete a particular Invoice in SAP. And after deletion of Invoice I want to be generate same no of another invoice.  Is It possible. And what is the procedure to generate..   (For Example- if it is a last invoice

  • Should I Set My X-FI To 5.1 or Headphones For My Zalman 5.1 Headphon

    It may be a stupid question but i just wanted to know i have it set on 5. right now but people say that new CSS Headphone is amazing so i dont know please give me some insight, thanks

  • Drop zone has 100 opacity

    This is not what I want. I need 100, but the Properties show it set to 100, Blend Mode- Normal and Preserve Opacity is unchecked. Yet I still can see images behind this image as do all the sequential images. What other setting could there be? Opacity

  • Turning off wifi n bluetooth in windows

    Thank you for viewing my post..will be glad if you could help.. I recently purchased a Macbook Pro 13 and installed windows using bootcamp.. now i am faced with the problem of not having a way to turn off wifi and bluetooth..is ter an application for