Wind Vista SP2. iTunes 10.6.3.25. I'm trying to Consildate my Music Library on this PC, and get the error: "Copying files failed, because you don't have permission to change your iTunes Media folder or a folder within it." My admin user has Full Control
Any suggestions would be greatly appreciated!
I did what you suggested on all three folders: The main Music folder on the Mac hard disk, on the iTunes folder on the external 160GB Hard drive which contains the current media content and on the new 2TB hard disk on which I created a new media folder. I selected permission for myself which were already read+write and chose the apply to enclosed items on all three folders. I then changed the permission for others to read+write and applied to enclose items also an all three folders.
But it didn't solve anything.
Here's what happens: I choose the new directory in iTunes preferences (the media folder on the 2TB disk) I then go to File > Library > Organize Library and then choose Consolidate files. A window pops up and says copying "filename" with a progression bar underneath but the filename never changes. Instead the beachball appears when the mouse pointer hoovers over iTunes. Upon pressing the iTunes icon in the Dock it says that iTunes is not responding. At this point there's 2 different ways:
A - If I then force quit iTunes the iTunes window disappears but the application does not close. When I want to eject the 2TB disk it says it's being used by another application. Only when I cut the power to the 2TB disk does iTunes fully close. A window then pops up and says that the drive was not put away properly etc.
B - if I cut the power to the drive without force quitting iTunes, a window appears with the said: "Copying failed because you don't have permissions to change iTunes media folders etc." iTunes remains open and fully functional.
Similar Messages
-
Copying failed because you don't have permissions to change your iTunes me-
This is what it says: Copying failed because you don't have permissions to change your itunes media folder or a folder within it
I'm using iTunes media consolidation procedure to copy all media files from the existing folder on an external Lacie 180 GB firewire 400 to an external Hitachi duo pro 2TB firewire 400 that has a raid feature which is switch to 1 (essentially it does 2 copies on both disks at the same time)
It won't even copy a single file. I've tried to copy other stuff from the internal hard disk to the new 2TB disk and copies fine (5GB folder full of software). It only does this with iTunes.I did what you suggested on all three folders: The main Music folder on the Mac hard disk, on the iTunes folder on the external 160GB Hard drive which contains the current media content and on the new 2TB hard disk on which I created a new media folder. I selected permission for myself which were already read+write and chose the apply to enclosed items on all three folders. I then changed the permission for others to read+write and applied to enclose items also an all three folders.
But it didn't solve anything.
Here's what happens: I choose the new directory in iTunes preferences (the media folder on the 2TB disk) I then go to File > Library > Organize Library and then choose Consolidate files. A window pops up and says copying "filename" with a progression bar underneath but the filename never changes. Instead the beachball appears when the mouse pointer hoovers over iTunes. Upon pressing the iTunes icon in the Dock it says that iTunes is not responding. At this point there's 2 different ways:
A - If I then force quit iTunes the iTunes window disappears but the application does not close. When I want to eject the 2TB disk it says it's being used by another application. Only when I cut the power to the 2TB disk does iTunes fully close. A window then pops up and says that the drive was not put away properly etc.
B - if I cut the power to the drive without force quitting iTunes, a window appears with the said: "Copying failed because you don't have permissions to change iTunes media folders etc." iTunes remains open and fully functional. -
I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?
BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me? -
"You don't have write access for your iTunes Media folder..."
My daughter is trying to import CD's into her library. Some work fine but most won't load and she gets a message stating "You don't have write access for your iTunes Media folder or a folder within it. To change permissions, select your iTunes Media folder in the Finder, and choose File>Get Info."
Following those directions the iTunes Info window appears and at the bottom her user name appears with the privilege as Read and Write. Clicking on the little gear icon below we select Apply to Enclosed Items. A message pops up stating "Are you sure you want to apply the selected owner, group and permissions to all the enclosed items?" Clicking ok a status bar pops up showing "Applying permissions to iTunes".
No changes occur in the issue we're having. This only occurs on her user.If you have problems importing CDs with iTunes because of write access errors, you can do the following to reset the permissions to the Music folder for your user/s where the iTunes subfolders are typically located:
Open Finder
Macintosh HD
Users
Open the folder for your User
Music
Right click > Get Info
Bottom right hand side, unlock the padlock, entering your user's password
Under Sharing & Permissions, ensure all relevant users have Read & Write, including Staff
Then, click on the main user (you), then go to lower left hand side, click on the settings cog, and press Apply to enclosed items. -
PLEASE HELP. you don't have write access for your itunes media folder or a folder within it
I am using Windows 7. If it makes a difference, my OS and important programs run on an SSD, while eveyrthing else is on a larger HDD. For awhile now I have had this problem anytime I try to do things in iTunes like import a CD, or a blu-ray digital copy. It gives me this error "you don't have write access for your itunes media folder or a folder within it windows 7." I have read tons of articles on how to change file permissions in windows and give full control and all that stuff. I swear I have read and tried anything remotely close to a solution for my issue, and it just wont fix it. Anyone have any out of the box ideas aside from changing permissions on the iTunes folder?
Also, when I make a new user account on my PC, the fresh iTunes on that account works just fine. So I don't know whats going on. Any help is GREATLY appreciated. Thanks!clsepulveda wrote:
! I've gone to the itunes folder and found where it says read and write and I don't understand what the problem is.
Make sure to click the gear icon and select Apply to enclosed items. -
I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder “Music” can’t be opened because you don’t have permission to see its contents". Why cant i access the files from my old mac? I tried the time machine and that isnt working either. I have files that I need to use on my new mac, all my old programs and such. I thought they said it was easy to get your files from one mac to another. Please help.
Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
$ id
You should see a line that starts with something like this:
uid=501(your_user_id_here)
now check the owner of the folder you copied over:
$ ls -ld Music
drwx------+ 8 some_user_id_here staff 272 May 14 16:08 Music
Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
$ chown -R johnsmith Music
Now try and access it with iTunes. -
I am trying to copy my entire iTunes library and everything in it from my PC Desktop to my PC Laptop using the "External Drive" method as shown on the Apple website. On Part 1 (5) I am told to consolidate files. When attempting to do this I get the message "Copying files failed. The file name was invalid or too long."
How do I resolve this?I have just been having this problem and it has been driving me mad. The error message doesn't tell you which file is causing the problem so you can't fix it and it leaves your libray in a state of limbo with some files copied into the new location and some in the old location. After many hours I found a surprisingly quick and simple solution.
1) in iTune create a smart play list that includes everything that was added before tomorrows date. This will include everything.
2) Right click this playlist and export it as a text file to produce a tab delimited file.
3) Import this into a spread sheet, or just view it in a text editor with line wrap turned off. What you are interested in is the last column (or end of the line in a text editor). This gives you the path of the file associated with each entry in the library.
The path of the files that have already been copied successfully will start with the new location for your media files you specified. Scroll thru the rows until you get a blank path. If you start getting paths starting with the old Media file location then you went to far and start scrolling back.
The row with the blank path was the file that failed. Move back to the start of the row to find out more about it. In my case it was a podcast with a very long name. I just deleted that podcast from iTunes.
4) Restart the consolidation by choosing File, Library as you did before and the process starts again where it left off.
5) If it fails again on another file just repeat the process -
My MacBook Pro with 750GB storage refuses to startup due to a problem with logic board (unfortunately I'm in Singapore and there is no Apple store here and zero customer support). I'm trying to access some of the files from the time machine back-up using my MacBook Air with 120GB storage, but I'm unable to open the backup. I receive an error message "you don't have permission to see its contents". Unable to access time machine backup. The folder “Documents” can’t be opened because you don’t have permission to see its contents.
I don't really want to migrate the data from the time machine to the MacBook Air as I simply don't have sufficient storage space on the MacBook Air. The iPhoto library which I'm trying to access is 200GB, which is more than the size of the MacBookAir.
Is there any way I can view the photos and documents stored on the time machine backup.
Thank you very much.When you setup the Mac, you created a Admin user account with say name X
You ran Migration Assistant and it migrated user Y from the Windows machine.
User Y has different permissions than User X.
User X can't normally access User Y's account.
So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
If you want to transfer files from User Y to User X account
Transfer files between user accounts on the same machine instructions
Finder > Go menu > Computer
A window appears with your boot drive, double click on it to open
Inside is Users folder, double click to open it
Inside is your User accounts, double click on the one you want to send files too
Double click on the Public folder drop the files into the DropBox folder,
The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
Windows in BootCamp or Virtual Machine? -
HT2963 The folder "Documents" can't be opened because you don't have permission to see its contents.
After running Apple Migration software from Win 7 to Mtn. Lion, the folders (now on the Mac in the "brokerbrian" users folder) have a red-dash-icon and upon attempting to open them, message box pops up stating: The folder “Documents” can’t be opened because you don’t have permission to see its contents. Any suggestions or encouragement?
When you setup the Mac, you created a Admin user account with say name X
You ran Migration Assistant and it migrated user Y from the Windows machine.
User Y has different permissions than User X.
User X can't normally access User Y's account.
So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
If you want to transfer files from User Y to User X account
Transfer files between user accounts on the same machine instructions
Finder > Go menu > Computer
A window appears with your boot drive, double click on it to open
Inside is Users folder, double click to open it
Inside is your User accounts, double click on the one you want to send files too
Double click on the Public folder drop the files into the DropBox folder,
The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
Windows in BootCamp or Virtual Machine? -
"The folder can't be open because you don't have permission to see it?
I click open my Macintosh HD - open users folder-thank open user name folder - there are many folders a few with a red button with an minus sign ! I try to open one of these folder wiht minus sign only to get the following message: "The folder Documents can't be open because you don't have permission to see its contents."
What gives? There are a few other folders that give me this same message!I followed ur directions : went to Get Info-under Sharing & Permissions it said I had no access. Under this message there was two column, one titled "Name" & the other "Privilege." Under "name" was my user name & under "Privilege" was Read & Write." The second row under "Name" was "everyone" with "No Access" in the "Privilege" column. I opened the padlock. A window with this message appeared: "Type your password to allow Finder to make changes." I entered my password, which was accepted. I have to admit at this point I was lost in what to do.
Closed the padlock. Tried to open document with no luck! <ha>
My "users: folder has two users name: under the :house: icon is one name while another folder has another user name i use. I don't have any problem opening any folder in the "House" icon folder - it's the other folder that I have an issue with.
What next? -
SAVE FAILED. You don't have permission to make changes on that file.
I have copied the domain file from one machine to edit the website from another machine. The editing job can be done without hassle. When I try to publish the we site from the machine where I have imported the domain file appear the message:
SAVE FAILED. You don't have permission to make changes on that file.
What's wrong ??
After 2 minutes appears another window: Your domain has been published...And how did you copy it over?
Depending on how the file was brought over, it may still have permissions set from the prior volume (I had this problem with iPhoto libraries). It's able to create the web content from the live document, but unable to save the changes to the domain.sites file.
You can try running "repair permissions" with Disk Utility in your Utilities folder to see if that helps. -
Been having problems with Firefox/internet for several days, and all my updates seemed current. I decided to try to reload and have removed the other icons/download attempts from the app file. When I try to drag the icon into apps, I now get this message:
The operation can’t be completed because you don’t have permission to access some of the items.* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
i'm trying to update from 3.2, but when I try to transfer the download to the application
folder I get the message, "The operation can’t be completed because you don’t have permission to access some of the items."See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
The folder "com.apple.TCC" can't be opened because you don't have permission to see its contents.
I've noticed a folder with a 'no access' sign on it's bottom right corner - com.apple.TCC - and when i try to open it it says "The folder “com.apple.TCC” can’t be opened because you don’t have permission to see its contents."
Does anyone know what this is and why i can't access it? No-one else uses this macbook but me.
Also, as of this afternoon, I can't two finger scroll on any web browser?
Thanks.Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
The folder "cores" can't be opened because you don't have permission to see its contents.
HELP, I did something very stupid. I used my installation disk and went into the disk utility and change the Volume Scheme to partition it to 1 volume & named it Macintosh. The prior hard drive name was possiby Macintosh HD and I renamed it Macintosh (this wiped out all the previous information). Unfortunately I did not use the Time Machine to backup my information, but I use my Iomega 500GB eGo USB 2.0/FireWire 400/FireWire 800 Portable Hard Drive to backup my information . I tried to retrieve the backup and it says that I do not have permission since I changed the previous hard drive’s name. What can I do to restore my old hard drive information. Shown below is what it shows: The folder “cores” can’t be opened because you don’t have permission to see its contents. Much appreciated if someone could help me.
I am panicking now and I am so afraid that I lost all my information by what I did.
Don't be upset. From what you've said, I don't see any reason to believe that you lost anything. You did make a lot of mistakes, though, starting with having only one backup and not testing it.
I did not use any software when I did the backup.
Yes, you did. You can't do anything with a computer without using software. Possibly what you mean is that you used the Finder. That's software. Or it may have been something else.
Hopefully you can help me , but if you can't, do you think if I contact someone at Apple can?
I'll try to help you as time permits, but it might make you feel better to make an appointment at the "Genius Bar" of a local Apple Store. They aren't really geniuses and I can't promise they'll help you with this problem, but it doesn't cost anything.
Maybe you are looking for
-
I am having a issue with server.app. It errors out on reading the settings for DNS
Apr 8 10:01:13 portal.ejsoftware.private servermgrd[6373]: -[DNSRequestHandler readSettingsWithRequest:]: exception thrown: *** setObjectForKey: object cannot be nil (key: comments) Apr 8 10:01:13 portal.ejsoftware.private Server[6363]: Error: The
-
I have a value '2222.12' stored in a database table. i fetch this value and write this value to a file but in file the value is '2222,12' instead of '2222.12'. i.e dot is being replaced with a comma automatically, can anyone tell what is the mistake
-
Cannot enable Admistrative user after already been enabled before
I hope im not alone on this one but wat the hell, i need help asap. My problem is that I cannot enable my Administrative user( the built in one). I had enabled it long tym before, created a password, and then disabled it again just recently. now I ca
-
hi , In transaction VF11 , SD person cancelling billing document . it generates two AB type Accounting documents . first accounting document is created for customer,excise & Sales Tax is OK, second accounting document is created for only excise but i
-
Hello, I am looking for an analytics tool for our native iOS and Android mobile applications. I am wondering if RUEI has support or is planning on adding support for native mobile applications. Thanks, Ana Chang Oracle Social Network