Window that can automatically grow to show all of its components

Try as I might, I cannot get a window to automatically grow so that all of its internal components are properly visible. I've tried messing with bindings but apparently a lot of prefWidths and the like aren't calculated until a component is actually visible. Window.sizeToScene also doesn't really appear to do anything. Essentially I'd just like to be sure when a window is shown that everything is visible. Is there an easy way to do this? Any advice would be appreciated, thanks.

Wow, it turns out the answer is shockingly simple but it's not really clear from the documentation. If you use the Scene constructor that does not take width,height parameters ( http://docs.oracle.com/javafx/2.0/api/javafx/scene/Scene.html#Scene(javafx.scene.Parent) ) then your Scene will be big enough. Awesome!

Similar Messages

I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

How do I get a longer list of items in the history window - and not have to click "Show All History"? The default list is too short.

How do I get a longer list of items in the history window - and not have to click "Show All History"? The default list is too short.

Well I figured it out… all you do say show commands :-/

Is there an unlimited music download package that can be purchased or do all downloads have to be bought individually?

Is there an unlimited music download package that can be purchased or do all downloads have to be bought individually?

There is no subscription model for iTunes. You purchase the songs you want individually.
(58812)

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

My mission control isn't mission controlling. It was showing all apps open, but now it just shows the dashboard and not all the open programs. Is there something I can do so it shows all the open programs again?

All of a sudden my mission control stopped showing all of the open applications. is there a button i hit by mistake? It only shows dashboard and the home screen.

Connect the iPod to your computer and let it charge for a couple of hours. The try to backup the iPod
iOS: How to back up and restore your content
Then
Photos
- If they are in an iPod backup then restore an iPod, iPhone or iPad from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
or
iPhone Backup Extractor for Windows and Mac
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
To try to make your iPod work see the following. It may end up erasing the iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I make it to where you are not aloud to delete the history unless you have a password? Public Fox does not work because they can simply go to "Show All History" and delete from there.

Alot of people use my computer and I would like to make it to where you are required to have a password to delete the history. I tried public fox but you can simply delete the history by accessing "Show all history". So public fox doesn't work.

Sorry, Firefox doesn't have a password feature for browsing history, and I haven't seen an extension for that.

Is there any way to create a mini Now Playing window that can "float?"

Hi,
I've been reading the Help in iTunes, as well as searching the Net, but I'm not finding the functionality I want. Basically, I want to have a mini Now Playing window that I can reposition so it's not covered up by other windows while I'm working. Is there a plugin that will do this, or is it a standard feature of iTunes, that I've overlooked?
Thanks,
Jason

I'm not sure what you're asking about. What "announcement" are you seeing? Is it possible you've installed a plugin of some sort? iTunes, on its own, doesn't announce what song is playing, except in its usual little gray window.
You can get rid of the iTunes window entirely by clicking the red "close window" button in the upper left (or typing command-option-1). If you are still looking for an answer to your original question — creating a mini-player that floats on top of all other windows — click the green "minimize" button and select "Keep MiniPlayer on top of all other windows" in Preferences > Advanced.
I don't know which Chris you're talking about.

Is it possible to have a dual boot system with Windows that can ALSO be booted into a virtual machine optionally?

I have been looking for a solution to this for some time now. I want the convenience of a virtual Windows environment that can run simultaneously with OS X Lion--something I have right now using Virtualbox. But at the same time, there are graphics and processor-intensive Windows applications (for me, games and engineering applications) that don't run well at all in a virtual machine. So, here is what I am looking for:
A dual boot (i.e. bootcamp) system running Windows 7 and OS X Lion in which the Windows 7 machine can EITHER be booted as a virtual machine while running OS X OR booted physically so as to utitlize all system resources. The real trick however, is that I I want the virtual machine and the physical machine to be the exact same system. Meaning, if I boot physically into Windows and change something... rename a file, run a program and create a file, etc... those changes will all appear in the virtual machine.
Now, what are my options? I have read about Virtualbox and VMWare Fusion's "Raw Disk access" function but I can't tell if that's what I'm looking for or not... I half-thought that they were talking about converting a physical OS into a virtual machine, but without the intention of booting the physical OS again...
Also, I'm open to any software, free or otherwise. Thanks!

both VMWare Fusion & Parallels Desktop for Mac can use a bootcamp Windows installation as VM exactly like you want.

Warning message DM10826 when running gendata (text merge area that can shrink/grow on image that cannot grow)

I am currently converting from Documaker 11.3 to 12.2 While running GENDATA I get the following message:
DM10826: Warning in TextMergeParagraph(): Attempting to use a text merge area that can grow, on the image <JACKETPAGE> which cannot grow. Processing will continue.
I have a text area in the JACKECTPAGE section that has the sizing option of "Can grow and shrink" selected. This is because I have an imbedded tag in the middle of the text area. The "form section options" for the JACKETPAGE section that contains the text area does not have "Can shrink and grow" selected. If I change the JACKETPAGE "form section options" to select "can shrink and grow" the warning message goes away.
Couple questions:
(1) What are the ramifications of selecting "can shrink and grow" on the form section option? I really don’t want anything else on the form to move around.
(2) If there are no ramifications of selecting this option on the "form section options" there an easy way to find every section that has a text area that is flagged as "can shrink and grow" so that I can proactively flag the associated form(s) in order to eliminate these messages?
Thanks for whatever help that you can give on this!

The message is actually an old one, so I would be surprised if you are just now getting the message moving from 11.3 to 12.2. Unless it is perhaps because you were previously not using Studio model MRL and now you are.
The message indicates that a growing text area could potentially push objects out of the section boundary or even exceed the boundary itself - assuming you mapped in enough data. It is simply a warning.
If you know that your content can't really grow beyond your section or if you know and expect the result in case it does, then just ignore. Or if you know there is sufficient room for the content to grow within the section without overflowing the boundary (because you have white space at the bottom), then you could set the Can Grow on the section and prevent the message. Your choice really depends upon what you prefer.
However, if the growing text area can indeed push objects (or itself) outside the boundary with the data you map, then setting the Can Grow on the section will affect your output.When a section grows in size, this adjusts the position of the remaining sections on the page. If you don't allow that, you could have overlapping content if the text area pushed something outside the boundary of a section.
As for whether there is a way to globally set existing sections to grow, I don't think there is. The version you have now will automatically try to set the section to can grow when editing a section and you add a dynamic text area. However, you can still turn that off if you don't want it on. That does not affect existing forms or sections which you have in the library until you were to edit the sections and modify a text area.

Database that can automatically update ebooks w/embedded flash

Hi I have a client who thinks it's possible to set up a database that will automatically update ebooks/pdf files with embedded flash so that manual translation between languages (e.g. english/norwegian/german/russian) can be avoided. I'm trying to explain that translation is still a manual job, but perhaps there is a way? Any thoughts? Don't have a programming background, so any advice appreciated. Tried to explain that setting up advanced databases on the web is in anycase an expensive proposition, they've only got around 100k to play with...any ballpark figures for mysql or similar with translation? For a webcourse, with around 200 webpages...haven't actually seen or heard of it done myself, and have let them know it will be some 6-8 zeroes bet left to e.g. Cisco et al.
Regards...would be helpful if you could come with some $/£ figures to let them know they're completely in left field...never heard of a database that could optimize pdf/ebooks on the fly between languages.

Computer-aided translation isn't up to the task your client envisions.

Itunes and all of its components will not uninstall

Itunes is shwing in my control panel but nowhere else and i cannot remove any of its components it says unable to find path

What's the precise text of that error please, arthur? (There's a few different ones I can think of that you might be getting.)

Is there a DIAdem Script command that can automatically create folders/directories in Windows?

Hi there!
I need to automatically create folders/directories in the Windows file system? Is there a DIAdem Script command to do this (like the way you do it in DOS/Unix or even Matlab (mkdir command)? Thanks!

Hi,
there are two ways to create folders within a DIAdem script:
Call FolderCreate("d:\New Folder")
Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
Call fso.CreateFolder("d:\New Folder 2")
Christian

How can I verify that the PCI-6534 is using all of its onboard memory?

When using a PCI-6534 under Windows 98 with NI-DAQ 6.9, I need to transfer a small buffer (8126464 bytes) to the adapter, and get it into the onboard memory. The board is configured for 32 bits output, and I'm using handshake mode. DAQ_GET_DEVICE_INFO tells me that there is 33554432 bytes for each Group. DIG_Block_Check shows that 2031587 words (8126348 bytes) are remaining to transfer. Is that in the PC system memory or the PCI-6534 on board memory? How can I tell if it is safe to reuse the (PC side) buffer? Also, How big is the FIFO on the PCI-6534?

When you call DIG_Block_Out, NI-DAQ first downloads your data into the 6534 memory. Only after the download is done (which should happen at about 80 MB/s) it starts outputting data and DIG_Block_Out returns. So it is safe for you to reuse your PC memory buffer as soon as DIG_Block_Out returns.
This is assuming your entire buffer fits in memory. If it doesn't, NI-DAQ will download all the data that fits and start the transfer, and as more 6534 memory becomes available the DMA channel will fill it up.
The 6534 has a 16 sample FIFO and an additional 32 MB of memory for each handshaking group. So for 32-bit transfers you can fit 8 MSamples, for 16-bit transfers you can fit 16 MSamples (per group), and for 8-bit transfers you can fit 32 MSamples (per group) in the 6534
memory.

How can I make LR show ALL my subfolders?

I have LR 5.3. I have an external drive with a master folder ("all my photos") within which are multple subfolders. When I enter LR in Library view, I only see the folders that have had images imported into LR. I want to move some of hte photos I have imported to some of the other folders,but those other folders do not appear. I have tried "show parent folder" and then expanding it, but that does not help. The folder I *WANT* to move these photos TO, is BELOW the folder that has the photos. Here's my structure:
all my photosfamily
birthdays2013-new
holidays
I have imported into birthdays (2013-new) and now I want to MOVE that folder to holidays, but the holidays folder does not show up in LR. I have tried putting photos directly into holidays, doing an import+"uncheck all" but the import button then goes gray, so I can't continue the null-import.
How can I get "holidays" to appear without importing anything (I actually have DOZENS of such folders I want to appear).
Hoping for a clue,
DJ

Yes, it sounds workable, but you can do one export of an entire folder, or an entire collection, instead of exporting each photo individually. Are you aware that you don't have to export every photo that you edit? You export only when needed for some non-Lightroom purpose; so for example, if you have edited 100 photos, and then you decide that you want 25 for a slideshow in JAlbum, then you would only export those 25.
You can have photos exported to the same folder as the original, this is an option in the Export dialog section named Export Location. You can assign custom names using the File Naming section of the Export Dialog box, so you aren't overwriting your original, and you can easily tell which one is the export.
When I see "collections" in the panels, I don't see the folders the photos came from. Maybe I'm not looking inthe right place.
Collections only exist in Lightroom. They do not exist in operating system folders. If you have a collection of photos that come from many different imported folders, then the idea of keeping the exported photos in the same folder as the original destroys the idea of keeping the photos from the collection together.
This brings up the concept of differentiating your "organization" from your "folders". These are two separate concepts in Lightroom, even though they might have been the same thing in PS and Bridge. Your organization of photos (keywords, collections) is always kept in Lightroom and can be independent of how the photos exist in folders in your operating system. In this example, where you want a collection of photos from JAlbum, I see no particular issue with keeping the collection in Lightroom, and exporting to a specific folder (not the same folder as the original folders) for JAlbum. Now, I understand you are going to say ... hey wait, I want the export and original together ... yes, they are together in Lightroom, where your organization exists, even if they are not together in folders. If you force yourself to continue to use folders as the way to organize, and you force yourself to stick with the old idea of keeping export and original together, then you lose the benefit of some of Lightroom's best features; you need to adapt and use new methods and throw out your old ideas about the way photos should be organized.
My opinion ... all organizing should be done in Lightroom, and not via folders. The only time a folder should be used is at import (the photos have to go somewhere, I use folder names based on capture date) and at export when the photos are needed for some non-Lightroom purpose (the photos have to go somewhere, you can choose a meaningful folder name). Other than that, I do not use folders for any purpose.

Window that can automatically grow to show all of its components

Similar Messages

Maybe you are looking for