Windows 2000 server and j2sdkee1.3.1_01

Hi,
Hope this isn't redundant. I couldn't find any reference to this error.
I just did a fresh install of J2EE 1.3.1_01 on Win2K server. When I try to start the J2EE server for the first time after a reboot (and all subsequent attempts) I get the following error:
J2EE server listen port: 1050
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:134)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:222)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:134)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:222)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server reported the following error: Could not initialize j2ee server. Poss
ible cause could be another instance of the server already running.
Error executing J2EE server ...
attempts to stop the server result in this:
javax.naming.CommunicationException: Can't find SerialContextProvider
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:66)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:154
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at com.sun.enterprise.util.Utility.lookupObject(Utility.java:122)
at com.sun.enterprise.server.J2EEServer.shutdown(J2EEServer.java:788)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:876)
javax.naming.CommunicationException: Can't find SerialContextProvider
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:66)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:154
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at com.sun.enterprise.util.Utility.lookupObject(Utility.java:122)
at com.sun.enterprise.server.J2EEServer.shutdown(J2EEServer.java:788)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:876)
Unable to shutdown the J2EE server.
Does anyone have any suggestions, aside from changing my OS :-)
Regards,
jpkara

Hi,
Hope this isn't redundant. I couldn't find any
reference to this error.
I just did a fresh install of J2EE 1.3.1_01 on Win2K
server. When I try to start the J2EE server for the
first time after a reboot (and all subsequent
attempts) I get the following error:
J2EE server listen port: 1050
java.lang.RuntimeException: Could not initialize j2ee
server. Possible cause cou
ld be another instance of the server already running.
at
at
at
t
com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming
POAProtocolMg
r.java:134)
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:222)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Could not initialize j2ee
server. Possible cause cou
ld be another instance of the server already running.
at
at
at
t
com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming
POAProtocolMg
r.java:134)
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:222)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Could not initialize j2ee
server. Possible cause cou
ld be another instance of the server already running.
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:350)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
J2EE server reported the following error: Could not
initialize j2ee server. Poss
ible cause could be another instance of the server
already running.
Error executing J2EE server ...
attempts to stop the server result in this:
javax.naming.CommunicationException: Can't find
SerialContextProvider
at
at
at
t
com.sun.enterprise.naming.SerialContext.getProvider(Ser
alContext.jav
a:66)
at
at
at
t
com.sun.enterprise.naming.SerialContext.lookup(SerialCo
text.java:154
at
at
at
t
javax.naming.InitialContext.lookup(InitialContext.java:
50)
at
at
at
t
com.sun.enterprise.util.Utility.lookupObject(Utility.ja
a:122)
at
at
at
t
com.sun.enterprise.server.J2EEServer.shutdown(J2EEServe
.java:788)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:876)
javax.naming.CommunicationException: Can't find
SerialContextProvider
at
at
at
t
com.sun.enterprise.naming.SerialContext.getProvider(Ser
alContext.jav
a:66)
at
at
at
t
com.sun.enterprise.naming.SerialContext.lookup(SerialCo
text.java:154
at
at
at
t
javax.naming.InitialContext.lookup(InitialContext.java:
50)
at
at
at
t
com.sun.enterprise.util.Utility.lookupObject(Utility.ja
a:122)
at
at
at
t
com.sun.enterprise.server.J2EEServer.shutdown(J2EEServe
.java:788)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:876)
Unable to shutdown the J2EE server.
Does anyone have any suggestions, aside from changing
my OS :-)
Regards,
jpkara
Try changing the port 1050 to another values .The corresponding config file is org.properties. It worked for me on windows 2000( Apparently, some service is using 1050 by default)

Similar Messages

Windows 2000 Server, and 2TB volume

Hey there.
So we recently racked a 7TB Xserve RAID, and plugged it into our Cisco FC switch, and Windows isn't playing nice.
I have a 2.2TB RAID5 volume that I have made available to this Windows 2000 Server (SP4) which Disk Management sees, but says in "unreadable". If I split the volume into two LUNs, it sees both 1.1TB volumes just fine.
Is there a 2TB upper limit to Windows 2000, or is there some cocktail of patches I need to install? I'd rather not have to split the LUNs just do use dynamic disks to make a continuous volume on the server...
Oh, and the volume shows up just fine to the OS X 10.3.9 server which is also plugged into the FC switch...
Oh, and a side question - is there a way to force Mac OS X 10.3.9 server to rescan the SCSI bus (Fiber Channel fabric) for disks without rebooting? I find it annoying to have to call up users and tell them to save / logout when I just want to bring a new disk online...

Then I'd recommend 2003 SP 1
Note, if you do have to slice and then re-assemble the volumes on your 2K server, be sure to do concatenated sets, NOT striped sets, from within Disk Administrator. If you stripe slices on the same RAID set, you're going to cause TONS of extra head seeking, as it tries to read from stripes on different sections of the SAME disk. There will be no performance penalty with concatenated slices, because it will always be reading off all 7 spindles.

Microsoft Windows 2000 Server and Solaris8 Interoperability?

My main server is a Windows NT based.
The Windows Services for UNIX2.0 is already installed in it.
I would like to know how am I able to access the Solaris machine from here.
I have problems trying to figure out which naming service for the Solaris machine (NIS, NIS+, DNS or Others). Which should I select?
Thanks in advance.
Tony.

Then I'd recommend 2003 SP 1
Note, if you do have to slice and then re-assemble the volumes on your 2K server, be sure to do concatenated sets, NOT striped sets, from within Disk Administrator. If you stripe slices on the same RAID set, you're going to cause TONS of extra head seeking, as it tries to read from stripes on different sections of the SAME disk. There will be no performance penalty with concatenated slices, because it will always be reading off all 7 spindles.

Installation of oracle 10g by window 2000 Server or Window XP professional

Dear all
Did you tried installatin of oracle 10g in Window 2000 Server and/or Window XP professional
installation on which one will be more reliable and stable?
As I am choosing which OS will be better as a Server
please help
Francis SZE

I don't think XP professional would be recommended as server.
would be better if you use 2000 Server or best if you use 2003 if you like windows environment
cheers

Developer 6i Installation with Oracle 8i on Windows 2000 Server

Hi Folks,
     We are using Oracle 8i (8.1.7) with Developer 6i for the past 2-3 years. Oracle 8i is installed on Windows 2000 Server and the client machines have Developer 6i installed. Using the Net 8 Easy Configuration Utility, the clients and the server are linked perfectly and we have never experienced any major issue regarding the connectivity from the clientâs sides.
     Now my question is that, is there any possibility that we can also install Developer 6i on the server, âcause we have tried this several times and every time after installing Developer 6i on the server, the Net 8 Easy Configuration Utility does not invokes and obviously we are unable to use any of the Developer 6i products and moreover after installing Developer the already installed 8i Database does not gets mounted and we are also unable to use the database.
     Are we missing some basic stuff here or do we need to run some patch for Windows 2000 Server?
     Another thing, all our forms and reports are residing on clientâs hard disks; can we also have the option that the forms and reports should also reside on the server so that we can easily update our forms and reports definitions from the server side?
TIA
Hassan

Hi,
Yeah, I installed both the products i.e, database and developer in separate directories.
Hassan

Binding Mac to a Windows 2000 server (Active Directory)

I have been trying to connect various mac machines on my campus to the active directory on a windows 2000 server.and i've been getting various errors.in one lab i have some IMac10,1- mac osx ver 10.6.2 and in the other labs i have lower versions on the Mac pro.I have seen on other forums where others where able to bind the mac machine to windows 2003 server,but no one mentioned windows 2000 server. Please tell me if its possible to add these machines to a windows 2000 server platform.

Hi,
what is the matter? it is a difficult problem or it is impossible to do that?
Please, if someone have any idea about this ,tell me?
with advanced thanks.

J2SE 1.3.1_08 DST upgrade on Windows 2000 server

Need help ASAP!
Due to a new DaySavingsTime policy we're planning to apply OS patches to fix the issue with our current version J2SE 1.3.1_08. Need to know if these patches will fix the issue or we need to upgrade to J2SE 1.3.1_18 or higher?
The code behind in some of our applications uses import.java.sql.Timestamp import.java.sql.GregorianCalendar
SimpleDate and other Date/Time related functions
If upgrade is needed will it be supported by Windows 2000 server and older version of WebSphere? What si the version that will be working with all of the above: new tz functions, Windows 2000 and WebSphere 3.65.7?
Message was edited by:
laguna21
Message was edited by:
laguna21
Message was edited by:
laguna21

I've worked it out thanks - it was a Tomcat 4.1 as a service oddity...
In Tomcat 4.1, each JVM Option must be entered in the registry as one option per key, e.g.
JVM Option Number 1 -server
JVM Option Number 2 -XX:+AggressiveHeap
and not
JVM Option Number 1 -server -XX:+AggressiveHeap
Hope this is useful to fellow Tomcat users. Oh, and in Tomcat 5, it places all the values into a single key in the registry and works - just for fun I guess ;-)

Moving a database in windows 2000 server to RED HAD

Hello Everybody
I have a database develop with oracle 10 g over windows 2000 server and i have to install completed in a server with oracle 10 g but in red hat linux . What the best way to to this operation ?

since you are using 10g, you can also use transport tablespace with differenct OS. If you are 10g Rel.2 side, you can use transport database new feature to transport database between cross platforms.
If data size is small, then, use exp and import.
Jaffar

Netbeans and Windows 2000 Server Problems

I've tried to run netbeans on my windows 2000 server OS a few times. It usually doesn't work out and I have to go back to pcGrasp.
Does anyone out there know of any issues between netbeans and this OS. Is it worth it. I'd like to move away from the .net world and learn j2EE but I'd like to move up my IDE. Netbeans seems like the best choice. Does any experienced individuals out there know of a better one?
This was my latest error with netbeans. From just opening a folder??? I also tried to report it - I still have to wait another hour after I registered before I could HOPEFULLY find where exactly I can report it. Maybe thats why there are so many bugs. They make it impossible to report something they tell you to report to help out.
A java.lang.reflect.InvocationTargetException exception has occurred.
Please report this at http://www.netbeans.org/issues.html,
including a copy of your ide.log file as an attachment.
The ide.log file is located in your C:\Documents and Settings\Administrator\.netbeans\3.6\system folder.
Thanks for anything
-Wiley

I use Windows 2000 Professional and have not problems.
I would suggest,
- ensure you have all windows updates.
- ensure you have JDK 1.4.2_04
- try eclipse which is also free (From IBM) http://www.eclipse.org/

Migrating Users and Groups from Windows 2000 server to Windows 2013 Standard.

OK...let me see if I can get this question out the way I need to....
I inherited a Windows 2000 Server that's on it's last legs. We have a new server, a Windows 2013 Standard machine that we just recently purchased. I need to migrate the users and groups over to the new server, but there are two things that are
making it difficult:
The 2000 machine is NOT a Domain Controller
The 2000 machine is NOT running Active Directory
This is a file server that hangs onto another network of which I have no control of. It has its' own IP address and there is NO WAY we can run Active Directory or make it a domain controller.
I have close to 300 users, groups, and printers to bring over to the new server. Rather than kill myself doing manual input, is there any other way to do this?

Hi,
When you import the CSV file to new server, you need to create a new user account then import the CSV.
http://blogs.technet.com/b/heyscriptingguy/archive/2014/10/01/use-powershell-to-create-local-users.aspx
If you have any issue, i suggest you could ask in PowerShell forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

EAP with Windows 2000 client and IAS server

Several messages on this site point to peole using EAP on a Windows 2000 client and authenticating against an IAS server. I am running an Aironet 350 AP and trying to setup my Windows 2000 clients to use EAP only and authenticate against a Windows 2000 AD forest via IAS. The access point and client are on the latest firmware and drivers (12.0 for AP). I have two basic questions.
1. It is my understanding that by enabling Network-EAP as the only authenticaiton type that users will authenticate and then dynamic WEP keys will be used, greatly reducing the risks of compromised WEP keys while at the same time keeping the data encrypted.
2. Does anyone have a quick HOW-TO or point-by-point list of how to configure the Windows 2000 client to authentication using the Network-EAP method? I am currently running into a situation where no matter what I configure on the client, the IAS server reports and error with "Reason: The authentication type is not supported on this system." I also noticed that the "Authentication-Type" and "EAP-Type" fields shown in the IAS messages in the Windows 2000 Event Viewer log have the value "<undetermined>". Has anyone else run into this?

I'm having a similar problem. I'm trying to do PEAP and it appears that IAS is not handling the request properly. It keeps trying to log the user PEAP-##### in instead of setting up the TLS and then asking for Username, Pass, Domain. The IAS error message I'm getting is:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = APPLY\PEAP-00097CFCD901
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name =
Authentication-Type = EAP
EAP-Type =
Reason-Code = 8
Reason = The specified user does not exist.
So if anybody has the needed settings for Win2k (SP3 and 802.1x patch) IAS it would be much appreciated.
Ben
Note: if I had PEAP-####### as a user in Win2k I get:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = apply.org/Users/PEAP TEST
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type =
Reason-Code = 16
Reason = There was an authentication failure because of an unknown user name or a bad password.

Discoverer and Windows 2000 server

I would like to know if Discoverer 3.1 Aministration Edition will work on the windows 2000 server?
Any hint is highly appreciated! Thanks!
Jane

Jane,
Discoverer Admin as well as the desktop work with Win2000. Due to the third party integrator Visigenics visibroker Discoverer for the web is not compliant. NT however is.
Christopher
null

Installation problem JDK 1.5 on Windows 2000 server

I am trying to install the new J2SE Development Kit 5.0 for Windows 32 bit on a windows server 2000 computer with sp4. When I attempt to execute the file
I get the following result
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x036eb514, pid=1872, tid=1592
# Java VM: Java HotSpot(TM) Client VM (1.4.2_10-b03 mixed mode)
# Problematic frame:
# C [awt.dll+0xb514]
I see that the log file refers to Hot spot client 1.4.2 - I'll post the rest of log if necessary but thought I would try asking in case the solution is clear without the full log.
I understand JDK 5.0 can be installed on windows 2000 server with service pack 3 or 4. Any help would be appreciated.
Thank you.

I've checked all these possibilities:
(1) DLL's associated with JAVA - none other than 1.5
(2) Path makes no reference to 1.4 anywhere
(3) No othe java programs are listed in add/remove programs
(4) no oracle product is installed
(5) windows 2000 registry does not contain anything obviously associated with 1.4.2
IS any Java product included automatically with Windows 2000 Service pack 4?
Here is the full log file text:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x036eb514, pid=928, tid=1916
# Java VM: Java HotSpot(TM) Client VM (1.4.2_10-b03 mixed mode)
# Problematic frame:
# C [awt.dll+0xb514]
--------------- T H R E A D ---------------
Current thread (0x02c0a160): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=1916]
siginfo: ExceptionCode=0xc0000005, reading address 0x00006ffd
Registers:
EAX=0x00001bf8, EBX=0x037bf638, ECX=0x0000001d, EDX=0x0000001d
ESP=0x03a5f460, EBP=0x081471cd, ESI=0x000000f8, EDI=0x00000004
EIP=0x036eb514, EFLAGS=0x00010202
Top of Stack: (sp=0x03a5f460)
0x03a5f460: fffffffc 02c0a1fc 037ae360 00000004
0x03a5f470: 086c0e44 ffccffff 037bf5f8 037bf5b8
0x03a5f480: 00000000 00000000 00000000 036e1a43
0x03a5f490: 03a60000 00000038 00000278 00000189
0x03a5f4a0: 00000278 03a5f514 037ae360 03a5f508
0x03a5f4b0: 02c0a160 0c14c8f8 03a5f654 0c14c8b0
0x03a5f4c0: 02b30a48 00000004 037ae360 00000000
0x03a5f4d0: 02bdaf98 00000004 00000017 0000027c
Instructions: (pc=0x036eb514)
0x036eb504: 00 00 83 e6 f8 c1 e0 05 c1 e9 03 03 c6 03 d1 45
0x036eb514: 8a 0c 82 8b 44 24 30 88 08 40 89 44 24 30 8b 44
Stack: [0x03a20000,0x03a60000), sp=0x03a5f460, free space=253k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [awt.dll+0xb514]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.java2d.loops.Blit.Blit(Lsun/java2d/SurfaceData;Lsun/java2d/SurfaceData;Ljava/awt/Composite;Lsun/java2d/pipe/Region;IIIIII)V+0
j sun.java2d.pipe.DrawImage.blitSurfaceData(Lsun/java2d/SunGraphics2D;Lsun/java2d/SurfaceData;Lsun/java2d/SurfaceData;Lsun/java2d/loops/SurfaceType;Lsun/java2d/loops/SurfaceType;IIIIIILjava/awt/Color;)V+89
j sun.java2d.pipe.DrawImage.renderSurfaceData(Lsun/java2d/SunGraphics2D;Lsun/java2d/SurfaceData;Ljava/awt/Color;IIIIII)V+40
j sun.java2d.pipe.DrawImage.copyImage(Lsun/java2d/SunGraphics2D;Ljava/awt/Image;IIIIIILjava/awt/Color;)Z+58
j sun.java2d.pipe.DrawImage.copyImage(Lsun/java2d/SunGraphics2D;Ljava/awt/Image;IILjava/awt/Color;)Z+30
j sun.java2d.pipe.DrawImage.copyImage(Lsun/java2d/SunGraphics2D;Ljava/awt/Image;IILjava/awt/Color;Ljava/awt/image/ImageObserver;)Z+15
j sun.java2d.SunGraphics2D.drawImage(Ljava/awt/Image;IILjava/awt/Color;Ljava/awt/image/ImageObserver;)Z+12
j sun.java2d.SunGraphics2D.drawImage(Ljava/awt/Image;IILjava/awt/image/ImageObserver;)Z+7
j javax.swing.JComponent.paintWithOffscreenBuffer(Ljavax/swing/JComponent;Ljava/awt/Graphics;IIIILjava/awt/Image;)V+223
j javax.swing.JComponent.paintDoubleBuffered(Ljavax/swing/JComponent;Ljava/awt/Component;Ljava/awt/Graphics;IIII)Z+131
j javax.swing.JComponent.paint(Ljava/awt/Graphics;)V+208
j java.awt.GraphicsCallback$PaintCallback.run(Ljava/awt/Component;Ljava/awt/Graphics;)V+2
j sun.awt.SunGraphicsCallback.runOneComponent(Ljava/awt/Component;Ljava/awt/Rectangle;Ljava/awt/Graphics;Ljava/awt/Shape;I)V+155
j sun.awt.SunGraphicsCallback.runComponents([Ljava/awt/Component;Ljava/awt/Graphics;I)V+101
j java.awt.Container.paint(Ljava/awt/Graphics;)V+62
j sun.awt.RepaintArea.paint(Ljava/lang/Object;Z)V+324
j sun.awt.windows.WComponentPeer.handleEvent(Ljava/awt/AWTEvent;)V+63
j java.awt.Component.dispatchEventImpl(Ljava/awt/AWTEvent;)V+552
j java.awt.Container.dispatchEventImpl(Ljava/awt/AWTEvent;)V+42
j java.awt.Window.dispatchEventImpl(Ljava/awt/AWTEvent;)V+19
j java.awt.Component.dispatchEvent(Ljava/awt/AWTEvent;)V+2
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+41
j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+169
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x02c0a160 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=1916]
0x02ca9fc0 JavaThread "AWT-Shutdown" [_thread_blocked, id=1924]
0x02b2e4a8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1944]
0x02b153e0 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=1984]
0x02a94bd8 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=1776]
0x02aa9da8 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=568]
0x02a8d0d0 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1276]
0x009b9240 JavaThread "Thread-0" [_thread_in_native, id=1812]
0x02b83db8 JavaThread "wizard.main" [_thread_blocked, id=1708]
0x0023e378 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2056]
0x0091e130 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2052]
0x0091bb58 JavaThread "Finalizer" daemon [_thread_blocked, id=936]
0x0091a780 JavaThread "Reference Handler" daemon [_thread_blocked, id=932]
0x00236898 JavaThread "main" [_thread_blocked, id=1816]
Other Threads:
0x00959358 VMThread [id=1460]
0x0095a008 WatcherThread [id=2044]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 1408K, used 474K [0x08140000, 0x082c0000, 0x085d0000)
eden space 1280K, 29% used [0x08140000, 0x0819f868, 0x08280000)
from space 128K, 71% used [0x082a0000, 0x082b6fb0, 0x082c0000)
to space 128K, 0% used [0x08280000, 0x08280000, 0x082a0000)
tenured generation total 18944K, used 3398K [0x085d0000, 0x09850000, 0x0bd40000)
the space 18944K, 17% used [0x085d0000, 0x08921ab8, 0x08921c00, 0x09850000)
compacting perm gen total 6144K, used 6083K [0x0bd40000, 0x0c340000, 0x0fd40000)
the space 6144K, 99% used [0x0bd40000, 0x0c330c48, 0x0c330e00, 0x0c340000)
Dynamic libraries:
0x00400000 - 0x0040b000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\java.exe
0x77f80000 - 0x77ffc000      C:\WINNT\system32\ntdll.dll
0x7c2d0000 - 0x7c335000      C:\WINNT\system32\ADVAPI32.dll
0x7c570000 - 0x7c623000      C:\WINNT\system32\KERNEL32.dll
0x77d30000 - 0x77da8000      C:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78045000      C:\WINNT\system32\MSVCRT.dll
0x08000000 - 0x0813e000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\client\jvm.dll
0x77e10000 - 0x77e79000      C:\WINNT\system32\USER32.dll
0x77f40000 - 0x77f7c000      C:\WINNT\system32\GDI32.dll
0x77570000 - 0x775a0000      C:\WINNT\system32\WINMM.dll
0x10000000 - 0x10007000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\hpi.dll
0x690a0000 - 0x690ab000      C:\WINNT\system32\PSAPI.DLL
0x007c0000 - 0x007ce000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\verify.dll
0x007d0000 - 0x007e9000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\java.dll
0x007f0000 - 0x007fe000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\zip.dll
0x03050000 - 0x0305f000      C:\Documents and Settings\Administrator\Local Settings\Temp\LRE4.tmp\bin\net.dll
0x75030000 - 0x75044000      C:\WINNT\system32\WS2_32.dll
0x75020000 - 0x75028000      C:\WINNT\system32\WS2HELP.DLL
0x782c0000 - 0x782cc000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779a4000      C:\WINNT\system32\DNSAPI.DLL
0x75050000 - 0x75058000      C:\WINNT\system32\WSOCK32.dll
0x77340000 - 0x77353000      C:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000      C:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000      C:\WINNT\system32\MPRAPI.DLL
0x75150000 - 0x75160000      C:\WINNT\system32\SAMLIB.DLL
0x7cdc0000 - 0x7ce13000      C:\WINNT\system32\NETAPI32.DLL
0x751c0000 - 0x751c6000      C:\WINNT\system32\NETRAP.dll
0x77bf0000 - 0x77c01000      C:\WINNT\system32\NTDSAPI.dll
0x77950000 - 0x7797b000      C:\WINNT\system32\WLDAP32.DLL
0x7c340000 - 0x7c34f000      C:\WINNT\system32\SECUR32.DLL
0x7ce20000 - 0x7cf0f000      C:\WINNT\system32\OLE32.DLL
0x779b0000 - 0x77a4b000      C:\WINNT\system32\OLEAUT32.DLL
0x773b0000 - 0x773df000      C:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773a3000      C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783e000      C:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790e000      C:\WINNT\system32\SETUPAPI.DLL
0x7c0f0000 - 0x7c154000      C:\WINNT\system32\USERENV.DLL
0x774e0000 - 0x77514000      C:\WINNT\system32\RASAPI32.DLL
0x774c0000 - 0x774d1000      C:\WINNT\system32\rasman.dll
0x77530000 - 0x77552000      C:\WINNT\system32\TAPI32.dll
0x71710000 - 0x71794000      C:\WINNT\system32\COMCTL32.DLL
0x70a70000 - 0x70ad6000      C:\WINNT\system32\SHLWAPI.DLL
0x77360000 - 0x77379000      C:\WINNT\system32\DHCPCSVC.DLL
0x777e0000 - 0x777e8000      C:\WINNT\System32\winrnr.dll
0x777f0000 - 0x777f5000      C:\WINNT\system32\rasadhlp.dll
0x03560000 - 0x0358d000      C:\Documents and Settings\Administrator\Local Settings\Temp\ismp001\win32ppk.dll
0x7cf30000 - 0x7d175000      C:\WINNT\system32\SHELL32.dll
0x75e60000 - 0x75e7a000      C:\WINNT\system32\IMM32.dll
0x77820000 - 0x77827000      C:\WINNT\system32\VERSION.dll
0x759b0000 - 0x759b6000      C:\WINNT\system32\LZ32.DLL
0x036e0000 - 0x037f3000      C:\Documents and Settings\Administrator\Local Settings\Temp\LRE4.tmp\bin\awt.dll
0x77800000 - 0x7781e000      C:\WINNT\system32\WINSPOOL.DRV
0x76620000 - 0x76631000      C:\WINNT\system32\MPR.DLL
0x03800000 - 0x03851000      C:\Documents and Settings\Administrator\Local Settings\Temp\LRE4.tmp\bin\fontmanager.dll
VM Arguments:
jvm_args: -Dsun.java2d.noddraw=true -Dtemp.dir=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp -Dis.jvm.home=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp -Dis.jvm.temp=1 -Dis.media.home=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE5.tmp\setup.jar -Dis.launcher.file=C:\Downloads\JDK 1.5 Update 6\jdk-1_5_0_06-nb-4_1-win-ml.exe -Dis.jvm.file=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\jvm -Dis.external.home=C:\Downloads\JDK 1.5 Update 6 -Xms20m -Xmx60m
java_command: run
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp
PATH=C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
USERNAME=Administrator
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 7 Stepping 3, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 2000 Build 2195 Service Pack 4
CPU:total 1 family 6, cmov, cx8, fxsr, mmx, sse
Memory: 4k page, physical 261668k(84712k free), swap 436140k(257692k free)
vm_info: Java HotSpot(TM) Client VM (1.4.2_10-b03) for windows-x86, built on Oct 10 2005 14:53:46 by "java_re" with MS VC++ 6.0

Service pack 4 on windows 2000 server with oracle 8.1.7

Hi,
does anyone know if there is any problem installing services pack 4 on windows 2000 server having oracle 8.1.7.?
Thanks.

I have one machine with that configuration and I had not any problem.
Joel P�rez

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Windows 2000 server and j2sdkee1.3.1_01

Similar Messages

Maybe you are looking for