Windows 2012 Remote Access Log

Hello,
is there a setting or configuration in Windows Server 2012 which excludes some sort of "grey Clock+Date screen" asking for Ctrl+Alt+Del for sign in, when accessing in the Server via Remote Access?
Actually this screen appears, and it is not receiving my Ctrl+Alt+Del remotely, so I can't sign in...
Thank you!!

Here’s a list commonly used keyboard shortcut key combinations to use in Remote Desktop Connection navigation, together with the action the shortcuts perform and equivalent keyboard shortcuts on local desktop.
CTRL+ALT+END: Open the Microsoft Windows NT Security dialog box (CTRL+ALT+DEL)
ALT+PAGE UP: Switch between programs from left to right (CTRL+PAGE UP)
ALT+PAGE DOWN: Switch between programs from right to left (CTRL+PAGE DOWN)
ALT+INSERT: Cycle through the programs in most recently used order (ALT+TAB)
ALT+HOME: Display the Start menu (CTRL+ESC)
CTRL+ALT+BREAK: Switch the client computer between a window and a full screen
ALT+DELETE: Display the Windows menu
CTRL+ALT+Minus sign (-): Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing ALT+PRINT SCREEN on a local computer (ALT+PRT SC)
CTRL+ALT+Plus sign (+): Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PRINT SCREEN on a local computer (PRT SC)
. : | : . : | : . tim

Similar Messages

Windows 2012 remote access

Hi!
I am planning on deploying a new environment which needs both VPN and Remote Desktop Services. VPN will be used for computers that are part AD, Remote Desktop Services for access from computers not a part of AD - dont want those unknown computers on the same LAN as the servers :)
Question is - is it safe to deploy these two roles on the same server, or should they be kept separate?
how have you set up your remote access? any good tips?
This topic first appeared in the Spiceworks Community

Here’s a list commonly used keyboard shortcut key combinations to use in Remote Desktop Connection navigation, together with the action the shortcuts perform and equivalent keyboard shortcuts on local desktop.
CTRL+ALT+END: Open the Microsoft Windows NT Security dialog box (CTRL+ALT+DEL)
ALT+PAGE UP: Switch between programs from left to right (CTRL+PAGE UP)
ALT+PAGE DOWN: Switch between programs from right to left (CTRL+PAGE DOWN)
ALT+INSERT: Cycle through the programs in most recently used order (ALT+TAB)
ALT+HOME: Display the Start menu (CTRL+ESC)
CTRL+ALT+BREAK: Switch the client computer between a window and a full screen
ALT+DELETE: Display the Windows menu
CTRL+ALT+Minus sign (-): Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing ALT+PRINT SCREEN on a local computer (ALT+PRT SC)
CTRL+ALT+Plus sign (+): Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PRINT SCREEN on a local computer (PRT SC)
. : | : . : | : . tim

Routing and remote access logging to SQL server

Hi!
I am in the process of trying to set up SQL logging from routing and remote access on a windows server 2003 to another windows server 2003 which is running microsoft SQL server 2005.
What i did was i created a database named RRAS in the sql server and in routing and remote access i went under remote access logging and configured it, when i press "test connection" it says its successful. and when i check the local logfile i successfully
configured i can see my connection attempts towards the RRAS. but in the sql database there's nothing, no tables or anything.
I am sure i have the right permissions going on since i have only been using one account for everything so far(created the rras and the sql database), the SQL server is operational(it has a myriad of other databases that are used on a dailybasis).
So i am wondering what component is missing? do i need to create the tables manually, is there a guide that tells me how to do that?

Hi Plindgren,
Thanks for posting here.
May in know which fields we’ve created for this table ?
Please take look the link below and recheck the database settings:
Key concepts for IAS SQL Server logging
http://technet.microsoft.com/en-us/library/cc778830(WS.10).aspx
For more information please also refer to the link below:
Deploying SQL Server Logging with Windows Server 2003 Internet Authentication Service (IAS)
http://technet.microsoft.com/en-us/library/cc776712(WS.10).aspx
Thanks.
Tiger Li
Tiger Li
TechNet Community Support

Windows 2012 Direct Access ISATAP not working

I just installed Windows 2012 Direct Access and it's working fine for my company's Windows 7 Ent clients. The only issue I can't around with is that ISATAP is not working on this box.
We want to be able to manage-out in our native IPv4 environment, the isatap A record has already been created and is resolvable to all client machines including the Direct Access server. Unfortunately, ISATAP still appears to be Disabled. Do we need to manually
set this to enabled apart from what I've already done?
PS C:\Windows\system32> Get-RemoteAccessHealth
Component            RemoteAccessServer   HealthState     TimeStamp            Id
Server               localhost            OK              1/31/2013
3:26:43 PM
6to4                 localhost            Disabled        1/31/2013 3:21:44 PM
Vpn Addressing       localhost            Disabled        1/31/2013 3:21:44 PM
Network Security     localhost            OK              1/31/2013 3:21:44 PM
Dns                  localhost            OK
1/31/2013 3:26:43 PM
IP-Https             localhost            OK              1/31/2013 3:21:44 PM
Nat64                localhost            OK              1/31/2013
3:21:44 PM
Dns64                localhost            OK              1/31/2013
3:21:44 PM
IPsec                localhost            OK              1/31/2013
3:21:44 PM
Kerberos             localhost            Disabled        1/31/2013 3:21:44 PM
Domain Controller    localhost            OK              1/31/2013 3:21:44 PM
Management Servers   localhost            Disabled        1/31/2013 3:21:44 PM
Network Location ... localhost            OK              1/31/2013 3:26:43 PM
Otp                  localhost            Disabled        1/31/2013 3:21:44 PM
High Availability    localhost            Disabled        1/31/2013 3:21:44 PM
Isatap               localhost            Disabled        1/31/2013 3:21:44 PM
Vpn Connectivity     localhost            Dis┌───────────────────────────┐4 PM
Teredo               localhost            Dis│Enter command number:      │4 PM
Network Adapters     localhost            OK └───────────────────────────┘4 PM
Services             localhost            OK              1/31/2013 3:26:43 PM
PS C:\Windows\system32> ping isatap
Pinging isatap.isat.com [192.168.1.214] with 32 bytes of data:
Reply from 192.168.1.214: bytes=32 time=1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128

Hi,
Thank you for the post.
As far as I understand, ISATAP is not recommended for use as the IPv6 to IPv4 transition technology in DirectAccess in Windows Server 2012. With ISATAP disabled DirectAccess clients can initiate connections to computers
on the internal network, and the computers on the internal network are able to respond. However, computers on the internal network will not be able to initiate connections to DirectAccess for purposes of remote client management. If you want to be able to
remote client management, consider deploying native IPv6 for management servers that will connect to DirectAccess client computers.
Regards,
Nick Gu - MSFT

I have windows xp remote access to my computer at work, is Firefox compatible with it?

I downloaded the newest version of Firefox and since then my windows xp remote access has not worked. I am wondering if these is a compatibility issue? Everything seems to be set up correctly and nothing else has changed on my computer.

What do you mean "register with Firefox"? Firefox doesn't need to be registered. Are you trying to register a Gmail account
Cookies are automatically enabled in Firefox. See the following articles for additional info regarding cookies.
*https://support.mozilla.org/kb/Cookies
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled

Routing and Remote Access Logs (Windows Server 2008 R2)

Hi,
I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network.
I have been asked to find logs for the following for connections in to our server
Username used for connection
Computer Name
IP Address used by computer connecting
Start/End time of VPN session
Date
Encryption used
I found an article stating to enable RRAS logs you need to run the following command
To enable RAS logs run command “netsh ras set tracing * enabled” and found a series of logs created in this location C:\Windows\tracing
None appear to contain the information I am looking for and was wondering if I was doing this correctly and if not how I am meant to extract this information?
If you require any more details just let me know.
Kind Regards
David

Hi,
I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB
mentioned method.
To configure RRAS to enable logging
1. Start Server Manager. Click Start, click Administrative Tools, and then click Server Manager.
2. In the navigation tree, expand Roles, and then expand Network Policy and Access Services.
3. Right-click Routing and Remote Access, and then click Properties.
4. On the Logging tab, select Log errors only, Log errors and warnings, or Log all events, depending on how much information you want to capture.
5. Click OK to save your changes.
The related KB:
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2012 Remote desktop session host server not detecting RD licensing server

Hi,
We have a customer server which is Windows 2012. We installed RDS session host server role and configured it to use RD licensing server as per the
https://support.microsoft.com/kb/2833839?wa=wsignin1.0
After configuring, when I open RD license diagonser tool, it says, RD license server is not available. Also shows, credential not available. When I enter the credential by clicking, provide credentials, it does not get applied. I see no event logs related
to RD service. However, I see the below event log which points to RD licensing server.
DCOM was unable to communicate with the computer <RD license server> using any of the configured protocols; requested by PID 273c (C:\Windows\system32\mmc.exe).
Please help in fixing the issue.
Thanks,
Umesh

Hi Umesh,
Thanks for your comment.
During your configuration, have you specified RD License server for RDSH to use?
You can also specify a license server for the RD Session Host server to use by applying the Group Policy under below path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
Use the specified Remote Desktop license servers – Provide the FQDN of the license servers to use
Also this setting can be specified by below method.
To configure the license server on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.SetSpecifiedLicenseServerList("License.contoso.com")
Note “License” is the name of the License Server in the environment
To verify the license server configuration on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.GetSpecifiedLicenseServerList()
More information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
In addition you can refer this article for reference.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Windows 2012 R2 - Access problems to NFS shares via IPv6

Hello,
we setup some NFS shares on HNAS storage box. The connection to this storage is only possible over IPv6 network.
My server with Windows 2012 R2 has the feature 'Client for NFS' installed and a 'showmount -e servername/or IPv6 address' works. I can see all shares when i try to open the storagebox in Windows Explorer with the command "\\servername" or "\\IPv6
address", too.
My problem is, when I try to mount the share via "Map network drive" or "mount \\servername\sharename *" I get Error 53 - Network path not found.
The share is configured that every server in the IPv6 subnet could access it and it works on Unix machines, but not on Windows.
It does not matter if i set some option parameters for the "mount" command like sec=sys or anon, everytime error 53.
I don't know, if the share needs special options for Windows. I hope somebody can help.
Kind regards

Hi,
here is the output of your 2 commands:
PS C:\Users\admin> get-SmbConnection
PS C:\Users\admin> get-SmbServerConfiguration
AnnounceServer                  : False
AsynchronousCredits             : 64
AutoShareServer                 : True
AutoShareWorkstation            : True
CachedOpenLimit                 : 0
AnnounceComment                 :
EnableDownlevelTimewarp         : False
EnableLeasing                   : True
EnableMultiChannel              : True
EnableStrictNameChecking        : True
AutoDisconnectTimeout           : 0
DurableHandleV2TimeoutInSeconds : 30
EnableAuthenticateUserSharing   : False
EnableForcedLogoff              : True
EnableOplocks                   : True
EnableSecuritySignature         : True
ServerHidden                    : True
IrpStackSize                    : 15
KeepAliveTime                   : 2
MaxChannelPerSession            : 32
MaxMpxCount                     : 50
MaxSessionPerConnection         : 16384
MaxThreadsPerQueue              : 20
MaxWorkItems                    : 1
NullSessionPipes                : HydraLsPipe
NullSessionShares               :
OplockBreakWait                 : 35
PendingClientTimeoutInSeconds   : 120
RequireSecuritySignature        : False
EnableSMB1Protocol              : True
EnableSMB2Protocol              : False
Smb2CreditsMax                  : 2048
Smb2CreditsMin                  : 128
SmbServerNameHardeningLevel     : 0
TreatHostAsStableStorage        : False
ValidateAliasNotCircular        : True
ValidateShareScope              : True
ValidateShareScopeNotAliased    : True
ValidateTargetName              : True
EncryptData                     : False
RejectUnencryptedAccess         : True
I try to access the file share with Windows Explorer. When I enter \\fe08--babe-face-cafe-dead.ipv6-literal.net (just example), I can see all shares on the storage box. When I double-click the share, I want to access, where an access is definitely allowed,
it takes a while and then the error "\\fe08--babe-face-cafe-dead.ipv6-literal.net\share is not accessable. You might not have permission to use this network resource. ..." appears. Of this action a recorded the trace.
Another way I tried is to open command line an type "mount \\fe08--babe-face-cafe-dead.ipv6-literal.net\share *". After this an error 53 occurs immediately without any wait time.

Anyconnect is not able to run with windows routing & remote access service

I am unable to connect with the new Anyconnect VPN installation when it tries to connect, it raises an alert that says, "The Windows Routing and Remote Access service is not compatible with the VPN client. The VPN client cannot operate when this service is running."
I have a Dell system laptop, OS is XP SP2 with all the latest Windows updates up to SP2. My internet connection is DSL modem. Internet hardware is an
external adapter connected to my USB port. The adapter is controlled by the Routing and Remote Access service mentioned in the alert message.
Can anyone help me how we can solve this issue. I appreciate the help and currently some of the users can not connect to my network who works from home.
Thanks
Chandru

I believe that Chandru's concern is in his statement that his DSL modem is controlled by the RAS service.
I agree with Andrew that Chandru probably does not need the RAS enabled. I have used several Dell laptop running XP and connected to DSL just fine without needing RAS. If there is some aspect of how the laptop is configured that results in needing RAS for the modem then perhaps Chandru can clarify this for us.
HTH
Rick

Windows Vista Remote Access Unresponsive

I have a friend in another state who is VERY inexperienced with PCs. She has Verizon DSL using the Westell D90-327W15-06 wireless router. Whenever she requests my help (remote access invitation), I get an error saying that she may have closed the invitation. The Windows firewall is off. I tried having her shut down the Norton Personal firewall. I tried talking her through the port forwarding for 3389, however her software seems much different from the software described in the router manual. I still think her router is the culprit, because I once had this working when I had my laptop connected through her router when I was visiting her. We both have Dell Inspiron laptops with Windows Vista. Any suggestions?
Kitty
P.S. She tried calling Verizon support, but her inexperience coupled with the support person's accent made it useless. He couldn't understand the question and she couldn't understand the answer.
Message Edited by kittyliz on 10-14-2008 07:27 PM

Thanks for the response. I have read the threads and have
googled for more leads. I am getting two different responses
between Access 2000 and Access 2003. In 2000 It displays the help
properly but the Index/Search tabs contain content from Access 2000
help, not MyProject.chm. The correct window help is displayed from
MyProject.chm. In Access 2003 it does not display the
TOC/Search/Index tabs. The Access 2000 behavior is explained in one
of the links provided. The workaround is to provide a hook for the
F1 key and call the Helpfile manually. They provided the code and
it is also provide in Microsoft MKSB 271390. I have created the
Autokey macro to hook F1 and call the custom function, but the
application seems to be ignoring the F1 key hook to the Autokey
macro. The reason that I know this is because I put a pause in the
start of the function and it never gets there. Any other ideas that
I can try?
Thanks,
-Vernon

How can a Windows user remotely access their Home folder on a MacOSX Server

I have a staff member who would like to remotely access (ourside of our LAN) their Home folder on our Mac OSX server. Anyone know and willing to share the process?
Thanks

Hi Brad!
Generally, a VPN solution is best to allow someone access to your company network. VPN provides security and access to some or all of your company's network resources.
If AFP is allowed to pass through the VPN tunnel, then your user would connect via VPN first and then connect to the server with a connect string such as "afp://servername".
Or if your user's home folder is also shared as a Windows share, your user could connect via VPN first and then connect to the server with a connect string such as "smb://servername".
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.6)

Remote Access Logs?

I have the suspicion that someone is remotely accessing my computer using screen sharing/vnc.
Are there anywhere logs from this application, where I can see what time my computer was accessed?

Look in /var/log/secure.log
You can Applications -> Utilities -> Console to look at the log.

Sccm 2012- remote access to client

Hi
We have SCCM 2012 and enabled the remote tools to the workstation
I noticed when I used a ccount with local admin I able to access the machine properly
But when I used account "without" local admin account in the computer I'm getting "prompt" to enter user name and password and even I input the account I;m getting still prompt option.
Please advise why the NON/Without "local admin" can't access the machine and pompting a user name and password
The remot tools required local admin ???
although the user have local admin can do ..
Robert

When I add the "remote control or remote viewer in local administrator of the machine, the thing work smoothly
The only issues are , when the remote viewer is NOT part of local administrator I can't able to remote the machine
addiotinal info for port listening for further troubleshooting
need your help .. is there any relation for the gpo ? because if local admin it work fine
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:445 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:2701 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49152 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49153 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49154 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49182 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49183 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49184 SCCMTEST05:0 LISTENING
TCP 192.168.24.218:139 SCCMTEST05:0 LISTENING
TCP 192.168.24.218:2701 server6032:60104 TIME_WAIT
TCP 192.168.24.218:57163 server5092:10123 ESTABLISHED
TCP 192.168.24.218:57265 server06:microsoft-ds ESTABLISHED
TCP 127.0.0.1:57280 SCCMTEST05:0 LISTENING
TCP [::]:135 SCCMTEST05:0 LISTENING
TCP [::]:445 SCCMTEST05:0 LISTENING
TCP [::]:2701 SCCMTEST05:0 LISTENING
TCP [::]:49152 SCCMTEST05:0 LISTENING
TCP [::]:49153 SCCMTEST05:0 LISTENING
TCP [::]:49154 SCCMTEST05:0 LISTENING
TCP [::]:49182 SCCMTEST05:0 LISTENING
TCP [::]:49183 SCCMTEST05:0 LISTENING
TCP [::]:49184 SCCMTEST05:0 LISTENING
UDP 0.0.0.0:123 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:5355 *:*
UDP 192.168.24.218:137 *:*
UDP 192.168.24.218:138 *:*
UDP 192.168.24.218:1900 *:*
UDP 192.168.24.218:54661 *:*
UDP 127.0.0.1:1900 *:*
UDP 127.0.0.1:52574 *:*
UDP 127.0.0.1:54575 *:*
UDP 127.0.0.1:54662 *:*
UDP 127.0.0.1:56463 *:*
UDP 127.0.0.1:59546 *:*
UDP 127.0.0.1:59642 *:*
UDP 127.0.0.1:63001 *:*
UDP 127.0.0.1:63986 *:*
UDP [::]:123 *:*
UDP [::]:500 *:*
UDP [::]:4500 *:*
UDP [::]:5355 *:*
UDP [::1]:1900 *:*
UDP [::1]:54660 *:*
UDP [fe80::9ddb:5483:f053:126e%11]:1900 *:*
UDP [fe80::9ddb:5483:f053:126e%11]:54659 *:*
Robert

Ix4-300d : Remote access logging / unknown user / invalid login attempt

From time to time a customer of mine is seeing invalid login tries in the log ( mostly 'admin', 'Administrator', but also unconfigured names like 'grigor'?.
Is there any chance to determine, whether these login attempts (until now not successfull because 'non-common' passwords are used) come from inside or via <my-cloud>.mylenovoemc.com from outside?
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

It should not put too much strain on the device, but it would make the dump log a bit longer. If you just got a dump report from the device without detailed logging should be able to get an IP address of the invalid attempt, so it may not be necessary to turn on detailed logging if you can get an IP address. Although if it is someone attempting to hack into the system, they are probably hiding their IP address anyway. Do they have a firewall on their network that could provide information about the source of the attempted login?
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Setting Up Remote Desktop Services Windows 2012 DMZ

Hi
I'm new to the Windows 2012 RDS. I am trying to figure out some things.
I have an application that I would like to publish to the outside world to our customers.
Im thinking of using Windows 2012 remote desktop services and publish the app via web browser. So users go to the URL and see the application.
Do I need a client brooker and gateway server for this setup? or can i simply deploy a web access server on the dmz which then connects to my remote session host server inside?

Hi,
To allow outside access into your RDS environment you would need to use the RD Gateway role. This can be configured on the same box as your RD Web Access role if resources are limited.
The RD Gateway role uses ether TCP 443 or UDP 3391 depending on what you have chosen to configure. You need to create a port forwarding rule from and to the gateway box using 443.
Have a look at the following articles:
http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
This should assit with the configuration.
Best regards,
Ryan Mangan | Ryanmangansitblog.com | Help keep the forums tidy, if this has helped please mark it as an answer

Windows 2012 Remote Access Log

Similar Messages

Maybe you are looking for