Windows Server 2012 compatibility with Thales nShield Connect HSM

Looking for any information on possible incompatibility between Windows Server 2012 (standard/R2, etc.) and Thales nShield Connect PCIe HSM
Configuring an offline Root CA with Server 2012. Works fine until HSM is added
Also interested in new Thales nShield Edge USB HSM (which Thales claims is ideal for supporting offline CAs -- experiencing same problems)

They'll know more over here.
https://www.thales-esecurity.com/support-landing-page
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

Is Windows Server 2012 compatible with HP Officejet pro 8600 plus printers

Hello,
I am wondering whether HP officejet pro 8600 plus printers compatible with Windows server 2012 - I have the driver installed on the server and deployed - installation of the driver and all was successful but it won't print from the server or on a user's computer from the deployed printers list. No error message comes up, I just click print and nothing happens. If I install it individually on the user computers - it seems to print as a 'network printer' but won't print from the server, and if it can not print from the server then it can not print from the deployed printers list. I was looking up on driver compatibility list online earlier and could not find Windows Server 2012 mentioned on the list - only server 2008 and below.
Essentially what I am trying to find out is whether this officejet pro 8600 plus printer is compatible with our server.
Many thanks,
Michael Peters

Hello Michael, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at the HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Endeca Windows Server 2012 compatibility (IAP 6.1.1/MDEX 6.2.1)

Hello,
I currently try to deploy Endeca ITL HOST on Windows Server 2012 RTM.
I get an error when doing a Baseline_update action: "Forge.run()" and there are just an empty log to help...
Windows Server 2008 R2 is working fine for me. Does anybody knows Endeca compatibility issues using Windows server 2012 ?
My Endeca version is 6.1.1 with MDEX 6.2.1
Does someone already succeded this operation ? (even with the lastest Endeca version)
Thanks,
Gregory

The component Forge.exe is not working with Windows Server 2012 (c++ runtime error)
It Looks to be the main problem.
Does someone knows how to make it works ? changing manifest maybe ?
Thanks

How to RDP access my Windows server 2012 system with Windows 7 system

In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
2. Disabled the firewall in Windows server 2012.
Can someone advice me on the below.
1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

Hi,
Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
Create a incoming UDP rule on firewall to allow port 3389 and give a try.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Microsoft // Winlogon 4005 (The Windows logon process has unexpectedly terminated) on one Windows Server 2012 VM with working RDS roles installed

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Windows Server 2012 R2 with Exchange Server 2013 SP1 Completely fresh install giving errors signing into EAC

Hi,
I am struggling with a completely clean installation of Server 2012 R2 and Exchange 2013 SP1. I followed these steps:
Installed Server OS
Windows Updates
Added Active Directory Role (This is a single standalone server that would have been SBS until it was dropped)
Added DHCP & DNS
Added Certificate Services
Added Windows Server Update Services (WID Database & WSUS Services)
Windows Updates
Added Media Foundation
Added File Server Resource Manager and Work Folders
Added Windows Server Backup
Windows Updates
Checked all running without errors in Server Manager and performed a full bare bones backup.
Ran Setup.exe from Exchange 2013 SP1 disc.
Installed Pre-requisites and then rebooted
Windows Updates
Ran Setup.exe from Exchange 2013 SP1 disc.
Installation completed without errors
Rebooted
Checked all running without errors in Server Manager.
I Launch Exchange Administrative Center and get "problem with website's server certificate error" (normal on machine with self-assigned certificates). Click Continue to Website and get:
Windows Security dialog box:
iexplore - "The server localhost is asking for your username and password. The server reports that it is from Digest"
however no username and password combination will work: have tried [Administrator]; [Domain\Administrator] even created a user to no avail.
I believe the issue is somewhere in the IIS configuration because I also get the same error when trying to log into the server website from either the server or another machine on the network.
I have tried the complete installation three times now: (full disclosure not all of the same features/roles each time). On the first attempt I got this error immediately and on try number 2 was able to get into the EAC and created the mailboxes
but then it started giving the same error. The above steps are try number 3.
Any ideas?
Thanks in advance.
Andy Halford
P.S. A Follow up which might be significant: The Default Web Site is not running and will not start (it was previously running before the Exchange installation) and when I try I get the message that Another Website may be using the same port however none
of the others (Exchange Back End or WSUS Administration) are using ports 80 or 443 and I still get the error when they are both stopped.

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Windows server 2012 compatibility

Hello,
I have a big problem. I installed a new windows 2012 server STD with Exchange 2013 and I encountred differents problems about backup compatibillty. I bougt the backup exec 2012 product it does not compatible with them.
We wish to backup on the tape (powervault LTO5).
Do you have any suggestion ? (downgrade to wondows server 2008 R2 with Exchange 2010 ??).
Thanks for your assistance.
Kind regards
Guillaume

Hello,
Backup Exec 2012 can backup remote Windows 2012 servers but cannot be installed on Windows 2012 and BE 2012 SP2 will backup Exchange 2013 but doesnot support GRT.
Backup Exec 2014 which is in the works to be released will provide all the features you are wanting and if you quickly register to be a part of the Beta program you can have access to these abilities even sooner.
Note: the Beta is full and will close by tomorrow so hurry if you want to be a part. Here is the link:
https://symbeta.symantec.com/callout/?callid=082D2918EC924087AA1F7FB1AE66B8E6
Lenora Moss Technical Support Engineer, SMB Partner Support, Symantec Corporation www.symantec.com

Clustering Free Hyper-V or Windows Server 2012 Standard with Windows Server 2012 Datacenter

Hi,
Is anyone running a cluster which has Datacenter 2012 clustered with either Standard 2012 or Hyper-V 2012?
I have seen posts here and elsewhere that say it is possible but when I rang Microsoft Licencing team to discuss licensing in this scenario they advised me that the hardware and OS on each clustered server must be identical.
Now I'm really confused.
Thanks,

Please repost in the proper forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
This forum is for the product Virtual Server 2005, not Hyper-V.

Logging into Windows Server 2012 from Remote Desktop requires "Connect with Smart Card"; how do I disable this?

I am using pretty much the default setup. I cannot figure out how to disable this. I do not want to use smart cards.
Any ideas?

Does this mean you're trying to RDP from an XP box, therfore have the Remote Desktop feature on the server set to "less secure"? Sounds like thats what disables network authentication, prompting the Smart Card request.
If you simply click to login as a different user, you can login without a smart card, to include the same user as was being prompted for the card.
I expect if you choose the Remote Desktop feature requires network authentication on the server, the smart card requirement goes away, but you'll need to login from Win7 or newer clients. Not sure where Vista falls, probably okay too.

WDS service will not start Windows Server 2012 R2 with Update

Greetings,
After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
Any suggestions? Am I missing a Win-PE boot Image? Should I do something else?
Please assist,
Bob Hessenauer

All,
The problem was a conflict between DHCP and WDS. Followed the instructions in this article and all is now fine:
https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
Just so you know,
Bob Hessenauer

Windows server 2012 and windows xp remote desktop connection loss

I am having this problem for a month now, and i am stumped with trying to find an answer . I have talked with several network admins in my area and with no luck i have not found a solution. I have a windows server 2012 placed with 5 pcs that are connected
on a local network , those 5 pc's connect to the server via remote desktop. List of pc's:
1x Windows 7
4x Windows XP SP3
All have the latests network drivers, all have the latest version of remote desktop installed. All have been scanned for viruses. All have antivirus software.
Problem is the 4 XP machines lose connection on when connected via remote desktop. If one starts losing connection the other 3 start to lose the connection aswell. The windows 7 machine is not affected by this it works fine.
What have I tried:
Scanning for viruses.
Disabling Firewall and antivirus software.
Updating all drivers.
Did many changes to group policy like keepalives etc.
Turning off SMBv2 SMBv3.
Turning off network adapter Offload settings.
Changed some registry settings like keepalive, smb etc.
Updating every pc and server with all windows updates.
Changed the router and switch.
Port forwarded needed ports like 3389.
Updating remote desktop to 7.0.
I might be forgetting some stuff i will add as i remember anything.
So the thing is this. I use a Windows XP machine from my office I remotely connect to the server via the Internet and I DO NOT experience any connection loss. BUT the XP machines on the local network constantly experience connection loss via remote desktop.
I pinged every Machine from the server via CMD command PING. So when they lose connection the Packets get time outs . Packets get dropped between 1-10 packets when a connection is lost. This packet drop does not occur when using the internet or anything else.
ONLY when connected to the server via remote desktop. The packets get dropped at random intervals.
Problem is I use an XP machine and I am not experiencing any loss of connection , while the XP machines on the local network experience it , but not the windows 7 machine.
Router is ASUS RT-N53 , and switch is Dlink DES-1008D. Server is a Dell PowerEdge T110 II.
Can someone please tell me what can i do to solve this problem?

So today got some word from their office. They were using RDP from 8AM until 12PM all was working fine. Then got back after lunch about 1PM and got a few connection lost errors when they tried using RDP again. Its weird since they didn't have disconnects
in the morning, and started having them after lunch.
Also noticed, that two pc were not using RDP and were disconnected as shown in task manager. And they still got request timeouts.
Maybe this is not a remote desktop issue?
TASK MANAGER
The 2 disconnected pc's ping screens:

The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

AD RMS cluster with windows server 2008 R2 and Windows Server 2012 R2

please i'm trying to add ADRMS server with windows server 2012 R2 with our ADRMS 2008 R2 cluster. and it fails with the following error:
"The Client DLL version doesn't match with the one of the servers"
so i want to know is it supported to add RMS 2012 R2 server to RMS 2008 R2 Cluster
Thanks

They can't coexist, but usually what happens is you add the 2012 server, it migrates your cluster database and then your 2008r2 servers can no longer connect.
What is this value:
DRMS_Config database
dbo.DRMS_ClusterPolicies
AdrmsFileVersion

Windows Server 2012 compatibility with Thales nShield Connect HSM

Similar Messages

Maybe you are looking for