Windows Task Scheduler executing old triggers even after recreating the task

I had this task working perfectly until I changed the schedule. After I changed the scheduled time 5 minutes earlier, I noticed that in the history, it still triggers the old schedule. I tried restarting the server, deleting the task and recreating it even
without a trigger and it's still executing the task with the old trigger. The attached screenshot shows that the task doesn't have a trigger but as you can see in the history it's still trying to execute the task. How does the Windows Task Scheduler work?
Is there a file or database that I can purge the old task?
I also tried applying this hotfix but it didn't seem to fix the issue: 
http://support.microsoft.com/kb/2461249
NOTE: This is Windows 2008 R2 and the Error message in the history is: Task Scheduler failed to start "<the
name of my task>" task for user "<the
user>". Additional Data: Error Value: 2147750689.

Since batch job can be run manually without error, cmd.exe is not the problem.
I researched and found that the problem may be due to exhausted desktop heap and the solution is to increase the value.
Please try this step:
1. restart the server first and test again (a simple solution that may work)
2. if the first attempt fail, take a full backup first and attempt to increase desktop heap
     http://www.symantec.com/business/support/index?page=content&id=TECH48099
Yes THAT WAS THE SOLUTION FOR THE ISSUE. !!
Now its working perfect!!
Why now its working and not before? Because after made the changes to the registry,
RESTART IS NECESSARY to apply the changes and I have done it yesterday night (this server is working 24x7, so its hard to find a moment to restart it). 
Thanks for all to help me with this issue!!! I really,really ,really ,really  apreciate !!! 
THANKS !!!!!

Similar Messages

  • Firefox always says using old version even after running the upgrade programme. Even after uninstalling & reinstalling? Why?

    Every time I open Firefox the message "using old version" appears I have tried uninstalling the program and then reinstalling but no change, When I use Firefox as my browser a message appears to say you are using an old version of Firefox. This is just fustrating what can I do to correct?

    Try resetting your User Agent:
    *[https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
    *[http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default Resetting your useragent string to its compiled-in default (Mozillazine)]
    *What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • HT4906 hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

    hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

    Not ure what this has to do with iPhoto. Perhaps you'd be better off asking on the forum for your MacBookPro.

  • Why does the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappear, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions?

    I am at http://www.closys.com/samples_&_coupons/get_a_coupon.html and the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappears, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions. What gives and how can it be fixed. I have a time limit.
    Thanks for your solution.
    Dan

    Mha007:
    Sorry, but I have already tried this too and verified that the web addresses are listed as Allow, rather than Block. After restart there was no difference, I still get the disappearing pop-up windows.
    Thanks for offering suggestions though.
    Have you heard of any issues like this occurring based on the number of tabs that are open in Firefox?
    Just a thought, even though I have not heard of this as an issue before. I keep about 80 tabs open regularly, because of research that I am always conducting (I am a blogger, a writer/author, a technophile-especially Green Tech.,), email, work, etc.?
    I do have a check in the box for Firefox to let me know if the number of open tabs is causing slow down or other issues.
    Thanks for any help.

  • I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount

    I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?

    In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
    How to export contacts from Outlook for Windows.

  • I had original iPhoto app from 2007, but in the last year it stopped working seemingly out of nowhere.  Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater.  My pictures are lost in the abyss.

    I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere.  Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater.  My pictures are lost in the abyss.
    I'm using OS Extended 10.9.5.  I don't know what the original version of iPhoto was.

    I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
    Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts.

  • SAPgui.exe is running even after closing the GUI components

    Hello All,
    Even after closing the SAP GUI components like Bex, WAD or RSA1 etc... i am able to see these processes are running under the Task Manager--> Processes....
    even if i try to restart the system, error messages are occuring...saying that SAP is still opend...
    Why it is happening, any ideas?
    Thanks,
    Ravi

    Hi Dirk,
    Thanks for your infomation. Infact, apart from this problem, i have the problem with saving the webtemplate. As it is taking much time to save a template after modifications, i had to terminate the wad process. It seems above 2 problems are related....any ideas?
    Thanks
    ravi
    Message was edited by: Ravi Pasumarty

  • HT5037 Iphoto Still wont open even after installed the prepare file

    Still wont open even after installed the prepare file. I haven't felt this frostation since window 5 

    Go to Applications /Utilities. Find the upgrader app there. Double click on it to run it.
    I haven't felt this frostation since window 5
    Sorry, no idea what this means.

  • CK40N - Still open even after applying the note

    Hello Everyone!
    Greetings!
    Experiencing issues in the costing run. SAP ECC 5.0
    After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
    SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
    To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
    Any suggestions/advice, please. Thanks in advance !
    Satish

    Hi Satish,
    There can be valid reasons for the 'still open' Materials.
    The following are reasons for 'still open'
    1. the materials were included in another costing run so there was an
    overlap in released cost estimates
    2. there was already a released cost estimate for those materials so
    the system did not allow for another one - this could have been costed
    manually and released manually (ck11) rather than in ck40n
    3. there was a stop in the job that ran to release them (you mentioned
    periods were closed). After the restart, some of the statistics could
    have been incorrectly updated.
    Furthermore, please see the note:
    542790     Inconsistency correction: Costing run statistics
    If need need to find the 'still open' Materials.
    If you run tCode 'SE16' and view the table table KALM which contains
    the entries for all materials costed within the costing run.
    Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
    1) Find cost estimates created originally within cstg run
    So, you have to select all entries of KALM for the specific costing
    run which are having KALM-FEH_STATUS = 'KA'.
    This is the number of cost estimates which should have been marked in
    the later marking step.
    2) Find cost estimates released successfully
    The set of released cost estimates is given by selection of table
    KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
    3) Find missing cost estimates
    Compare the results of 1) and 2):
    Which material/plant have an KALM entry, but not a released cost
    cost estimate ?
      > this will be the set of cost estimates you are looking for...
    Regards,Declan

  • My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

    My canon sx120 is  continues to show low battery and shuts off even after changing the batteries.  Any suggestions? Do I need to send it for repair somewhere, and if so, where?

    Hi LB!
    Thank you for posting on our forum!
    Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth.  If the same warning still displays, then the camera will need to be serviced.  To start the repair process, you'll need to complete a Repair Request on our website.
    If the camera is more than a year old, you may participate in the Canon Loyalty Program instead.  The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  
    If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My new imac won't operate youtube even after installing the latest flash

    my new imac won't operate youtube even after installing the latest flash

    Problem solved!
    I had downloaded and then installed Flash, and restarted. 
    The problem?  I was expecting Youtube to work as on my old PC, where you get a little pop-up menu at the bottom of the TV screen to play. pause etc.  That won't happen on a Mac until  you click on the oblong that says Flash in the middle - I didn't know that!
    Hooray!

  • I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open.  Any suggestions.

    I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open.  Any suggestions.

    Resetting Printing System helps OS X recognize new printers.
    http://support.apple.com/kb/HT1341
    When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

  • Protect The Cells in the Excel Sheet Even After giving the password.

    Hi All,
    I need to protect the cells in the report even after unprotecting the sheet after giving password.
    That is, i have used some excel formulas in some cells, these cells are to be protected.
    In Reports using EVDRE all the cells are getting, "Locked" option selected in the Protection tab by default. Even if we change that Option and refresh the sheet Locked is getting selected again.
    So once we Protect the sheet using password all cells are getting locked. But once we remove password all cells are free to enter.
    I want the user of the Sheet to use only certain columns in the Sheet. and all the other columns should not be user editable.
    Please help me out in solving this issue.
    Thanks in Advance,
    Regards,
    G.Vijaya Kumar

    Hi Vijaya,
    I tested in my test environment and even after refresh , the range cells are still editable, they didnt get locked. I did the following:
    1. Selected the range or column in Excel, then Tools - Protection - Allow users to edit range. I selected the range and gave the password.
    2. Next I protected the complete sheet.
    3. Now entire sheet is protected. Now again I selected the range in which I want to edit, first time it will ask for password which you gave for the range. So I gave and I was able to edit the cells.
    4. I selected other cells and was not able to edit it so they are still locked.
    5. I tried to refresh the report , and then I selected the range cells to edit and still I was able to edit it. Those cells didnt get locked.
    So did you do the same things?
    Thanks.

  • Why is the Lightroom preview folder so big, even after purging the 1:1 previews?

    1:1 or full-size previews take up a large amount of HD space, often many 10's of GB's. This is why building them on demand is an alternative to building them up front, and why you have options for auto or manually purging them. That said, it may not always be possible to delete 1:1 previews - more later. 
    Standard-sized previews are based on the pixel size option you chose in Catalog Settings. You have 4 choices: 1024, 1440, 1680 and 2048. If all you want is standard-sized then choose a size equal to or greater than your screen size. Lr also builds smaller versions at the same time. These are used for the thumbnail, 1:2, 1:3 and 1:4 zoom levels. Adobe call this the "preview pyramid". 
    1:1 previews will not be deleted unless your chosen standard-sized preview is less than half the size of the full-sized preview. For example, you have images with pixel dimensions of 3072 by 2048 pixels (6MP camera such as Canon 10D) and have selected 1680 pixels for standard-sized previews. Since a 1680 pixel preview is more than half the size of the original the full-sized preview will be kept, even after using the purge 1:1 preview command. Had you chosen 1440 pixel for standard-sized previews then the full-sized would have been purged (i.e. 3072/2=1536, which is greater than 1440). Now take the example of a larger camera, say a 8MP camera such as the Canon 1DMKII with an image size of 3504 by 2336 pixels. With the standard-sized set at 1680 pixels the full-size will again be purged (i.e. 3504/2=1752 pixels, which is greater than 1680 pixels). 
    Another thing worth mentioning - Lightroom will usually delay purging previews for deleted images until after the application has been closed and reopened, even then it might take a few minutes to clear the purged previews. The idea here is to ensure the previews don't get deleted whilst there's still a chance that they may be needed (e.g. you removed images by mistake then use Undo command to reinstate them). 
    Hopefully above explains why Lightroom doesn't behave as you expect. If it makes your head spin, think how much mine spun when writing it.

    The chance of an answer is inversely proportional to the length of the posting. ;)
    You do not indicate what your preview setting was while you accumulated a 12Gb preview folder. Nor do you indicate how many images are in your catalog.
    Given your screen size of 1280 (laptp?) I would set the preview size to 1440 since this is still far less than half of your D3 images.
    Cropping - I'll safely guess - has no effect on your preview size choices.
    I confess that preview sizing and purging is confusing. I avoid the confusion by shouting "more disk, mama".

Maybe you are looking for