Windows XP problem with Boot Camp

I set up my Boot Camp partition to make a 100GB Windows partition for XP. I got a setup disk for Windows XP Home Edition SP2 and when I went into Windows setup, my hard drive was only listed as one partition. I've tried it over and over again, tried making different sized partitions, and it still doesn't work. Can anyone help me?

At some point in the startup, I think you have to hit F4 to bring up a custom install dialogue, or it could be F10, to give you more options.
It happens with some editions of XP and no rhyme or reason anyone has deciphered.

Similar Messages

Windows 8.1 with boot camp on mac mini troubles

After installing a licensed Windows 8.1 with boot camp on my mac mini (2012,i7,4gb ram) my mac os Mavericks have trouble with starting,and i can't run recovery and safe mode.Another problem-i don't have sound in windows,but windows show me no troubles,and red light apear!!!Please help!

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Can't install windows 8.1 with boot camp

I'm trying to install windows 8.1 with boot camp and this is the message I keep getting. I've tried several times and every time I get this. I have a 2015 MacBook Pro. I've tried installing from a usb with ISO and also from a oem windows dvd. Any help would be appreciated.

Excellent.
Windows installation has four or five reboots, and the Apple BootManager tracks such reboots via the Mac NVRAM, otherwise the next reboot will cause OS X to boot rather than Windows. It is also used to set up some variables used to pass information to the CSM-BIOS layer. If an installation has failed, the variables do not reflect the current and clean state of the machine. A NVRAM reset will re-initialize these variables for the next attempt.

HT5639 Do I need to uninstall boot camp 4 before I install and update to boot camp 5. I already have windows 8 pro with boot camp 4 installed. Do I need to unistall boot camp 4 or not necessary?

I already have windows 8 pro with boot camp 4 installed on my macair book 11". I have searched the entire articles on how to upgrade boot camp 4 to boot camp 5 but have found no answer as to my question: Do you have to uninstall boot camp 4 drivers before you install boot camp 5? I am not sure if it is ok to install boot camp 5 directly without uninstalling boot camp 4 because there might be driver version conflict. So I have not installed boot camp 5. Is it ok to install boot camp 5 withoust uninstalling boot camp 4? Your answers will be much appreciated. Thanks.

Welcome to Apple Support Communities
You don't have to uninstall Boot Camp 4 drivers before installing Boot Camp 5 drivers. Boot Camp 5 drivers will simply overwrite Boot Camp 4 drivers, so you don't have to uninstall old drivers before installing new ones and making that process easier

Lion - Windows XP (SP3) with Boot Camp

Hi, I have a MacBook Pro with Lion on it and would like to install Windows XP (SP3) with Boot Camp, but the instructions only mention Windows 7... do I need to buy Windows 7 or can I run Windows XP anyway?

pietrofromlondon wrote:
that would be a costly option... I got 4 giga and will stick to it, I mainly use 2D, but 3D from time to time too... that's why I thought about boot camp rather than Parallels. Will try to get Windows 7 unless you think it's a bad idea.... By the way, how much space would you allow the partition for windows?
Not really costly at all, 8GB of RAM is currently $51 from www.macsales.com (OWC) and Fusion is $49 retail so for $100 you have an elegant solution. Much less expensive than buying WIndows 7.
Also you can partition as much space as you want, how much you need is 100% dependent on how much you use.

Problem with boot camp and windows 8

I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Need to Re-install Windows on Mac with boot camp

I purchased a Mac Pro from someone about 6 months ago that already had a 2nd drive with Boot Camp and Windows XP Pro running on it. Today for the first time when I booted into Windows, I got an error message saying that I "may be a victim of software counterfiting" and that my version of Windows is not an authorized version in my region.
I have an a genuine Windows XP Pro disc with seriel that I want to now re-install over the bad version. The problem is when I try to run the CD for install, I get an error message stating that I cannot install from the CD because the version of Windows I am currently running is newer than that on the CD.
So my question is, how do I uninstall the bad version of Windows and re-install the version off the CD? I know I will lose my files and programs but everything is backed up and I will reinstall everything when I get back up and running.
Thanks for the help!!

You can format from Windows CD if that is what you mean by "windows side."
Updates are usually done while boot in the OS you want to 'upgrade' while custom is only done booted from other media.
With a Mac Pro you could easily install in many different ways than if you only had a laptop or imac.
But you can't "pick yourself up by your own bootstraps."
I don't even like upgrade of SL while booted in Mac OS.
If it was my Mac I'd install Windows 7 and make better use of your hardware and the performance afforded.

Trouble installing Windows 8.1 with Boot Camp

I'm having an issue installing Windows 8.1 under Boot Camp on one of the new MacBook Pros (late 2013). After sever troubles (and not a few tribulations) fighting with the stupid Windows installer program (couldn't Microsoft just let me download a freakin' ISO?) I got the installer running after creating the partition, but at the end of the Windows install, I get:
Windows could not update the computer's boot configuration. Installation cannot proceed.
Googling around for a solution I found several references to UEFI problems, along with a couple different procedures that were claimed to work. Unfortunately, these procedures were pretty lengthy and require several third party tools -- and I'm not positive they're even applicable because none of them dealt with the newest model of MacBook Pro.
So, can anyone out there point me towards a procedure that's known to work with the new models?
Thanks.

OK... Finally solved the problem during my winter break... took almost 1.5 months Actually we users are creating the problem... Bootcamp is OK... our late 2013 Mac is OK... but Apple is't as it's not giving us the solution Now let me clear concisely what actually occurs behind the problem.
When you open bootcamp to install Windows, you get a popup window. Then you click continue... then you choose the options among the three which suits to your intention. Then if you chose to create a installation disk or/and download the Windows Support Software, bootcamp does so. Then the nextPROBLEMETIC STEP comes! Yes! you got it! This step creates the actual problem: Partitioning the hard disk for installing Windows. Before bootcamp starts partitioning, a simple POPUP WINDOW will inform you whether you will get the f*cking "Windows could not update the computer's boot configuration. Installation cannot proceed" message or not during your windows installation! Andddd... the popup window is here:
Soooo... super duper simple fact: if you don't get this popup window, you're going to get that error. Because this HELPER TOOL will simulate proper environment for installing Windows in your Mac
Now be sure:
1. You just have one partion in your Hard Disk before partitioning it into two for installing Windows
2. This PARTITIONING SHOULD ONLY BE DONE BY BOOTCAMP if you want your Windows in EFI mode. The way jarvil told us is for BIOS mode. I'm not going to explain here what is EFI and what is BIOS. Simply keep in mind that EFI is latest, better and faster for booting your Windows
That's it guys! If you don't get that popup window, follow the instructions:
1. Turn your hard disk into a single partition by using Bootcamp/Disk Utility. Bootcamp is recommended
2. Take a flash drive, format it, and then open Bootcamp
3. Choose all the three options:
     Create a Windows 7 or later vertion install disk
     Download the latest Windows Support software from Apple
     Install or remove Windows 7 or later version
Yes! We are going to create a new installation disk...
4. I know you are clever enough to guess what should you do now! Just enter your password when you get THAT SPECIAL POPUP WINDOW!Then Mac will restart after partitioning your hard disk!
5. Do noting untill the windows installation window comes
6. Go forward pressing Next, putting serial, and accepting the agreement that we never read
7. Select advanced installation... I mean the second option
8. Now find the partition named BOOTCAMP
9. Select it and Format it!
10. Click Next
You are done! Your Mac will install windows without any problem or error message After installation, if you find that your drivers aren't working, go to the installation disk and open the folder named BOOT CAMP. Open the exe named Setup... Install the drivers and restart after completion... Your Mac now owns Windows in EFI mode like mine!
That's all I have known killing my winter break! Thanks everyone! Take care!

I have a problem with boot camp and maybe macbook pro?

I am having issues with boot camp here is what I did.
I attempted to partition for windows then this message popped up after 2 minutes:
Verification failed. this disk could not be partitioned.
Use Disk Utility to repair this disk.
so I used the disk utility to repair the problem then this message came:
First Aid failed
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
The underlying task reported failure on exit
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file Temp File
(It should be 13 instead of 0)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume bitmap.
pair",0)
Checking volume information.
Invalid volume free block count
(It should be 23087569 instead of 23087570)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

Problem with Boot Camp - Help!!

Hi everyone,
So I just got a new MacBook and installed Windows XP Home Edition through Bootcamp. I followed the computer certification guidelines of my college (so that I can connect to the network), i.e., I installed Symantec Antivirus and Windows Defender (required), and also Firefox and MS Office, and for good measure, I installed AdAware and Spybot (both free versions). I did not use the internet at all and scanned the totally-unadultered computer, deleting the very few things that popped up on Adaware and Spybot.
However, the very next morning, Windows Explorer kept getting closed by "Data Execution Prevention" every time I tried to start Windows. (It says, "Instruction at 'Ox8bb9ed475' referenced memory at 'Ox8b9ed465'. Memory could not be 'written'".) Essentially, I can't use Windows and no amount of restarting remedies this.
I took my MacBook to the Genius Bar at an Apple store and they said the problem was most likely Symantec Antivirus - apparently, Symantec has lots of problems with Bootcamp; they also recommended using Parallels instead. But since Penn requires Symantec to certify a computer, I don't know what to do about this (not to mention Windows won't run anyway)! To be sure, the Apple guys were very rushed and seemed to be speculating, so I'm not sure how to take their advice.
Does anyone know what might be wrong? I remember reading that some current students at my school run Bootcamp just fine, and the tech dept. suggests using it as well. Any help would be GREATLY appreciated; I just don't want problems to occur once I start classes. Thanks so much.

Perhaps you should post this question in the Boot Camp forum rather than here. This is not the proper forum for dealing with Boot Camp or Windows installation problems.
I would consider reinstalling Windows. After verifying that it is working you can install Symantec AntiVirus and Defender, but I would not install anything else until you are sure the system is working properly. Note that you must turn off antivirus programs when you install new software. Failing to do so can result in defective installations.
Be sure you have carefully read the Boot Camp documentation before installing anything.

Install Windows 8.1 with Boot Camp

Greetings you all,
I've been trying to install WIndows 8(.1) on my MacBook Pro early 2011, but without any success. I downloaded the .ISO of Windows, stored it on my external HDD, downloaded the software via Boot Camp to host Windows (I'm sorry I'm french so I'll have to translate everything) and put it on another external HDD, and when I plug them to my Mac and start the installation of Windows, it doesn't detect the USB.
What should I do? If possible, avoiding any installation of the disk image on a DVD.
Thanks.

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Installing Windows XP-SP2 with boot camp

I created a Windows XP slipstream CD with SP2 and then started the windows setup with boot camp. After i pressed "enter" the first time to setup windows it said that it couldn't read the disk or find a previous windows installed on my computer. Then it told me to insert a full version of Windows Vista, XP, 98, or 95. I do have the full windows 95 but i cannot insert the CD during the setup. Is there anything i can do to make this work?
Thanks for any help!

It sounds as if the XP install disc that you started your SlipStream build with was an upgrade and not a full install disc. For SlipStream to work with BootCamp, you must start with a XP SP1 Full install disc.

Which version of Windows to use with boot camp & Lion?

Which version of Windows can I use with Boot Camp and Lion 10.7.1?
Don't want to run Parallel or any other 3rd party program.
Thanks.

Windows 7

Windows XP problem with Boot Camp

Similar Messages

Maybe you are looking for