WinXP partition size

Can anyone advise me as to what partition size would be ideal for windows gaming? I have a 500 GB hard drive and I want to be able to play windows games without having the gameplay suffer due to insufficient memory. Should I go with the 32 GB partition or should I customize the size?
Thanx in advance for any help

First of all, if you're going to install ANYTHING, you will install the HL series.
But second, the key phrase there was "I heard". I haven't installed HL2 Episode 2 yet (the first sentence here notwithstanding) so I can't be sure.
However, also keep in mind that HL2 and following uses the Steam infrastructure, which may itself be rather bloated. Also, HL2 is usually bundled with several other games (for example, Team Fortress and Counterstrike) and so I suspect it is Steam plus the multiplicity of games which takes up the large amount of spacee. That said, once Steam is installed, it is installed for good, so the next Steam game(s) will not take up as much space.
At any rate, I'm assuming that with a 500GB hard drive, Master of Illusion can afford a sizeable >32GB Windows partition. The reason I suggested 100GB as an upper bound is just that many computers ship with a hard drive no bigger than that, so it seems unlikely that bigger than that will be necessary. Exactly how big the partition should be will of course depend on which games Master of Illusion wants to install, whether they will be uninstalled, and how much space Master of Illusion wants to reserve for Mac OS and/or an iTunes library...

Similar Messages

  • WinXP partition size on MacBookPro (Parallels)?

    I'm planning on doing a partition on my 250 GB MacBookPro which I am going to access using Parallels while in OSX. In the event that the performance on a particular software is not sufficient I plan on booting into the "native" install of XP for better results.
    I plan to store (and access) all my files on (and from) the OSX part of the drive.
    Does this make sense?
    Can anyone give me a good idea of a minimum size for this partition if I am running 3d and 2d CAD? Is there a good way for me to determine this on my own?
    Thanks,
    - Jon

    Hi Jonathan,
    Hotwheels22 wrote:
    Hi Stefan.
    Thank you so much for this technical assistance.
    Also, thank you for the advice on MacOSX. I can really use this kind of "tangential" advice as I get started again with Mac. I suppose there is a widget somewhere that I can dock to get to the used/unused size of my partition (particularly as I hack my way through "segregating" information between the laptop and desktop, moving image files off my hard drive which I have duplicated by importing into iPhoto etc, etc...?
    Not needed that much. The OSX Finder shows you the free diskspace when opening a window or directly on your desktop right underneath the harddisk icons.
    Anyway, am I correct in thinking that the 50GB you recommend is exclusive of actual document file storage? I mean, I can plan to store /all/ my important (actual) documents on the OSX side of the partition, yes? The advantage of using Parallels in this case is that OSX partition and XP (or Win7) partition can "talk" to each other fluently in the dual boot configuration is that right?
    I am not that familiar with the file sizes of 2D and 3D CAD files, so I assumed that the 50GB would be including those files.
    But tis really depends on your personal useage.
    Parallels and OSX can share files through 'Shared Folders' which both can access without problems.
    And then, I guess I can add up the file sizes of the software I intend to install - and perhaps double or triple this - to get an idea of how much in excess of the 10GB I will be using to install software is that right?
    Yes, that's exactly what I meant. Personal 'mileage' can vary hugely.
    Lastly, can you say something about the /difference/ in /communication/ between OSX and Win when in "dual boot" using Parallels and when booting directly into the BootCamp partition? I guess that Parallels lets the two OS's talk to each other "fluently" whereas in the "native" boot into Win you can only read or write - er - Win can read and write from OSX but OSX can't read and write from Win (or the other way around?).
    Like said, Parallels uses Shared Folders for easy file access between OSX and the Parallels Windows.
    With BootCamp Windows you have to use third-party helper. Macdrive in WIndows to have read and write access to OSX partitions/volumes.
    NTFS-3G (as an example) in OSX to have read and write access to Windows NTFS partitions. In itself OSX can only read from NTFS WIndows partitions.
    Can you install MacDrive so the two can talk to each other when booting directly into Win??
    Yes, see above.
    Many many thanks,
    Jonathan
    Hope it helps
    Stefan

  • BootCamp/WinXp Partition Size

    I am going to install win xp via bootcamp on i5 27" imac. I will be using xp to run Paint Shop Pro(197 mb) for photo editing. No gaming. No video editing.
    Will the 32 gb partition be adequate for this purpose. I normally edit 2 to 4 mb files. Cloning and rudimentary layer work are probably most memory hogging tasks I will be performing.
    I am also curious as to the resolution that paint shop pro will run on the 27" screen.
    Thanks

    Hi,
    I am in the fortunate (no pun) position to have a Mac Pro with four harddisks in it.
    I simply made a 100GB FAT32 partition on one of them and use it for file tranfers between OSX and Windows XP.
    For the XP system partition I have always used (from the very beginning in my PC heydays) exclusively NTFS.
    I find NTFS far more stable and robust than FAT32 and the inability of OSX to write to NTFS without help added to this feeling.
    Also later Windows version (Vista and WIndows 7) need to have their system on a NTFS partition.
    I would never ever allow my BootCamp Windows to write to my OSX partitions, due to viruses and the like...
    The other way round allowing OSX to write to NTFS Windows partitions sounds not that bad to me, if I have to go that way.
    If I would have to go that way then I would first tryout the free NTFS-3G before and see how it 'behaves' before shelling out money for Paragon or Tuxera.
    All this with a descent backup strategy for may valuable files, which I already have.
    One thing to consider that there are tools for BootCamp Windows that allow a resizing of the partition later on. WinClone and/or CampTune.
    http://www.twocanoes.com/winclone/
    http://www.paragon-software.com/home/camptune/
    But this resizing can only be done if the partition uses NTFS as file system, so another one for NTFS.
    rEFIt is a Boot-Menu and Toolkit that I mainly use as a Boot-Menu at startup to avoid the neccessity of the 'Option'-key to choose which OS to boot.
    With the Option-key you have to press it at the 'correct' moment, rEFIt displays all bootable partitions in a Menu for a given time (30 seconds is default) before automatically booting the default one (defined by you).
    Since I have three OSX version (10.4 to 10.6) plus Windows plus a 'playfield' for testing apps, I find rEFIt far more convenient that the Option-key.
    http://refit.sourceforge.net/
    Hope it helps
    Stefan

  • Boot Camp Partition Size/External HDD recommendation

    After updating software, hardware, downloading Boot Camp Asst, and installing Windows XP Pro (have not yet downloaded Mac drivers or software, nor have I submitted registration of my WinXP Pro software, still have 29 days), I realized that I set the partition size too small and need to resize it. I read in other postings that I can copy the Windows partition to an external HDD from the Mac OSX side, then run Boot Camp again, delete the "too small" Windows partition, then run Boot Camp again and reset the partition size larger. Does anyone have detailed instructions to do this?
    Also, can anyone suggest an external HDD for this purpose? I need to be able to share files between a PC and my 17" MBP running OS X 10.4.6. Specifically, I need to share (for editing purposes) audio files created with PC-based software with the Windows side of my MBP. The PC has XP Pro and MacDrive6 for Windows installed. I read the "Sharing a FireWire drive between Mac and PC" document on "The X Lab" website and, based on this, am leaning toward getting a FW (not USB) HDD and formatting it in Mac OS Extended format (not sure how to do this but cross that bridge when I get there). Does this sound reasonable? When I run Boot Camp again and have to choose between NTSF and FAT32 should I choose NTSF? Will I also need "SharePoints" or other software to share the Mac's FW drive with the PC?
    I may have the option to share and backup files over the workplace network (if I take the time to set it up). Does anyone know if there advantages/disadvantages to this option?
    Thanks for answers to these questions. Any help would be very much appreciated. Best!

    Frank,
    You might want to check the Boot Camp discussions:
    http://discussions.apple.com/forum.jspa?forumID=1165
    In case no one in this part of the board knows.

  • Partition size for Leopard

    I am in the process of planning a new internal hard drive for my iMac G5 and am hoping for some advice. It will be a dual boot Tiger/Leopard partitioned 1TB drive (already purchased). I would like to maximize space in my third partition for non-sensitive files (music, photos, 40 hours and growing of home video) while leaving adequate space on the boot partitions to run the OS comfortably.
    Any suggestions for partition sizes for Leopard and Tiger?
    - Shawn

    I read yesterday that a new Firewire standard is to be announced in October raising throughput to that seen on eSata drives. So maybe the new crop of external drives that will hit the market will make some of this issue disappear.
    I am about to rebuild my Mac (500gb drive, Intel Core duo) and was thinking only three partitions would be necessary (OS X, BOOTCAMP / WinXP and DATA). I have an external video scratch disk for FCE.
    However I am unsure how to ensure my USR folders are mapped to the DATA partition so that the 50GB is only for OS X and the applications. I have noticed the Library \ Application Support folder can get quite large depending on the apps installed.
    Is there some sort of white paper or thread that gives advice on this?
    Thanks
    Eric

  • HT5639 I am attempting to install windows 7 ultimate on a mid2012 production macbook pro using Bootcamp 5 in Mountain Lion. Whenever I set the partition size and tell it to continue, the program quits unexpectedly. I have done this about 5 times now. Sugg

    The lead-in above pretty much states the problem. I am attempting to install Windows 7 from a disk, but that is not the issue. Boot Camp 5 just quits and reopens. I then repeat. Help.

    I am about to run specialized GIS software that may or may not need the full machine resources. I am an attorney who uses QuickBooks for my accounting. The Mac version does not do as much as the Windows version. This is from both Apple and Quick Books professionals. I am using Parallels Desktop version 8 at this time. It does not support QuickBooks Windows version per Parallels. Any other questions? I am a highly competent PC user who is new to Macs. I am entitled to my own configuration choices. That said, I know when I need help which is now.
    As to the free space issue I have 665.18 GB free space out of 749.3 GB on the drive. I am not trying to run the 32 bit version. I know that it requires the 64 bit version. Besides, it does not get that far in the process. As I said Boot Camp asssitant terminates unexpectedly as soon as you hit the continue button after setting the partition size. Therefore I conclude that it does not have a chance to see which version of Windows that I am using. I am using Windows 7 Ultimate 64 bit version in the virtual engine (to use Parallels speak), but again Boot Camp would not see that since it is not running. It can't run at the momenet because Apple just installed a new hard drive and I have just restored the data from TIme Machine and Parallels needs reactivated, which I have not done yet deliberatley. With all of this addtiional information do you have any further suggestions? Thanks for your time and interest my issue.

  • 1.8TB Hitachi HDS722020:  "Partition size is not a multiple of 4K"

    I picked up a 1.8TB Hitachi HDS722020 external USB drive, for an enlarged Time-Machine disk. The box says that it's usable on a Mac, but Disk Utility doesn't seem to like it.
    When I attempt to erase it, it sits there, indefinitely as far as I can tell, trying to format it saying, "Partition size is not a multiple of 4K." I am able to format it as MS-DOS FAT32, but not in any MacOS (Extended) format.
    Since it seems to be complaining about partition sizes, I was able to it into one partition containing almost all of the disk content, and another, "junk" partition that I presumably won't use very often. Unfortunately, the smallest "junk" partition it would let me create was about 190GB.
    So, waddaya folks think? Should I return it to the store as a bad disk, or is there any reason to think that it's behaving in some sense correctly?

    Hello mr88cet
    In Disk Utility highlight the external hard drives first icon on the left side list and select the Partition tab. Then decide on the # of partitions you want, then click the Option box and set the Partition map Scheme to GUID Partition Table. Now then you should be able continue to on with any multiple partition sizing (if more than 1 was selected) and format the drive Mac OS Extended (Journaled)...
    Just follow the Disk Utility prompts, it's really easy after you've done it a time or two.
    Also see > http://www.kenstone.net/fcphomepage/partitioningtiger.html
    Dennis

  • Maximum Partition Size for External Drive using DU

    Hello,
    I just purchased a 750g Maxtor USB drive for use with Time Machine. When I went into DU to partition and format the drive I was surprised to find that every time I went to create a single partition using all available space, the operation would error out. I was however able to create two partitions with the largest one sized around 650g or so. I was using the Mac file system.
    This just seems odd to me. Does OS X have a maximum allowable partition size that prevents me from creating one large partition?
    Thanks,
    Robert

    Hi Robert
    You should be able to delete the partition, try again using the instruction in the following article:
    http://macs.about.com/od/applications/ss/diskutilitysize_5.htm
    Dennis

  • How to set desired partition size on Satellite C850-12D with W7 Pro?

    Hi all,
    I recently got a new laptop, Satellite Pro C850-12D with Seven Pro: the disk (500 Gb) is initially partitionned like this:
    - a small hidden, 1.46 Gb
    - the C: one, 449.47 Gb (visible by the user)
    - a hidden one, 14.83 Gb
    I would reduce the C: partition to 100 Gb in order to create a new one for DATA.
    So, I begin the process using the Seven tools for disk managing but the disposable size after reduction seems limited to a max of 226.685 Gb: C remains higher or equal to 233 570 Gb.
    I tried defragmentation of C but its minimal size remains 233 570 Gb
    Is there a method to overcome this limit and achivce my goal of 100 Gb?

    Hi
    Before changing some partitions on the HDD I strongly recommend creating a Recovery disk!
    The Toshiba recovery media creator helps you to create such disk and this is needed in cases something would be wrong with your HDD.
    Back to partition issue:
    You will need to use an 3rd party tool like *Gparted* in order to change the partition size.

  • I want to increase partition size

    i want to increase partition size in my imac while installing windows 7 but it allocates only 20gb of space to to windows i want to increase it , how do i do it?,i havent installed windows yet because i want to allocate more space for windows

    no thanks thx so much i found out how to increase partition size ty anyways

  • Boot Camp Partition Size?

    I'm thinking of installing a boot camp partion. Does boot camp choose the size or do I. If I do, what's a good size to make it. I really will only run Office 2003 and my BlackBerry Desktop software and some browsing with IE.

    Brand new Mac user here who just made "the switch".
    I've also wondered "how large should I make the partition?"
    On the Windows partition, I intend to install XP SP3, Microsoft Office Suite, Project, Visio, and Adobe Acrobat/LiveCycle/Photoshop (at least those are the "heavy hitting" apps.) I also plan to run Parallels.
    I was alarmed to see that the suggested partition size for Vista is 60-70GB. But I never migrated to Vista because of all of its issues, bloatware, etc. and stuck with the tried and true XP. When I look at the tech specs for XP, the suggested available space is substantially smaller than the space required for Vista.
    I see that Boot Camp Assistant defaults to 32GB and that anything higher than 32GB prevents sharing between partitions.
    So some questions:
    1. Is 32GB enough/not-enough/more-than-enough size for my intended OS/applications indicated above? As it is, my HDD is 320GB.
    2. Do I care about sharing between partitions? More simply put: if I am running Parallels and running MS Word (which would be living on the Win side of the house), will I have the option to save my doc on the OSX side only if the partition is <32GB?
    3. And as follow on to #2, what are the ramifications of creating a Win partition >32GB from a usability standpoint? I'm having trouble discerning what those really are in layman's terms.
    4. Please confirm: when I run Boot Camp Assistant, should I create the Win partition as NTFS? Is this dependent on the size of the partition and if yes, what are the suggested formats in regards to size?
    Any guidance would be immensely appreciated.

  • Appropriate partition size for windows 7?

    i just bought windows 7 and want to install it on my mac pro that i recently bought. i was wondering what's an appropriate partition size for windows 7 and if it matters whether i install the 32 bit or the 64 bit? i'm mainly using it for a game (league of legends) if that makes an difference. thank you for your time.
    -Nikko

    If you have more than 4GB of RAM or are planning on some time in the future to install more than 4GB of RAM use the 64 bit version. The 32 bit version can not address more than 4GB. Windows programs are now 64 bit. Your computer is 64 bit. 64 bit Windows runs 32 bit Windows programs. So there is no reason to install 32 bit Windows.
    Windows 7 requires a lot of space. Then you need space for any data you create. I think that at a minimum you need 50GB plus data. I would opt for larger rather than smaller so the minimum I would partition is 100GB. If you conserve space now by making a small partition it is likely you will fill up that space quickly. You'll then wish you had made a larger partition initially. Search this forum, there are several questions on how to make a Boot Camp partition larger.

  • Changing partition size and migrating to Leopard

    My iMac currently runs OS 10.9 and has boot camp installed, but I chose a Windows partition size that was too small (only a few GB, enough to install Windows XP). I am now want to increase the size of the Windows partition and to install Leopard. What is the best order for me to change the partition size and install the new system? If the disk needs to be wiped clean to do this, what is the best way to back up the existing data and then to reinstall it. Would I use migration assistant?

    If your beta Boot Camp Assistant hasn't expired, you COULD do this before you upgrade to Leopard. If it has, you can play games with the date, or you can do this after you're on Leopard.
    Either way, if your partition is FAT32 you can back it up using Disk Utility, according to other posts (see especially backup/clone discussions in the beta discussion forum); if it's NTFS, Winclone is probably the way to go. If it's a real small partition, though, you might just start over, or back up only what's "yours".
    On either the beta or Leopard, you'd want to back up or clone the current Boot Camp partition, remove it using BCA, create the new larger partition using BCA, and then restore the contents.
    None of this requires wiping the MAC OS disk, it DOES essentially wipe out the WINDOWS disk. I don't think Migration Assistant helps here, but certainly haven't tried that.
    Doug

  • Best practice of expanding partition size

    Hi,
    I am just wondering what's the best practice of expanding a partition. Currently the server I am working in has the partitions configure as below:
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/mapper/VolGroup01-LogVol00
    5046848 4630796 155548 97% /
    /dev/sda1 101086 50293 45574 53% /boot
    tmpfs 4087296 2388360 1698936 59% /dev/shm
    /dev/sda3 5162828 141544 4759024 3% /tmp
    /dev/sdb1 1923068 734956 1090424 41% /fs0
    /dev/sdb2 1923084 70908 1754488 4% /fs1
    /dev/sdc1 89406276 68095788 16768916 81% /fs2
    /dev/sdc2 13804204 7061912 6041056 54% /fs3
    /dev/sdb3 6474880 4509556 1636416 74% /fs4
    Let's say I want to increase /fs2 which is /dev/sdc1 by another 15GB. I can go into the VMware and increase the disk size by 20GB but how will I go about increasing the partition size without affecting other partitions?
    Most of the instructions I see online basically creates a new partition but I want to avoid creating a new partition. So is it possible to do it?
    Thanks.

    You cannot increase a partition on a disk without affecting other partitions on the same disk unless it is the last partition. You will have to completely re-organize your partitions and restore from backup. You can however extend partitions that are under LVM control by adding a free LVM controlled partition or disk and assign it to any existing LVM volume in order to increase it's capacity. There is plenty of documentation and info available on the web. If you plan to increase your LVM root volume you need to boot form external media.
    Since you are using VMware there is actually no need to create multiple partitions on any disk. You can simply put each partition on it's own virtual disk. Then after you increase the underlying virtual disk, you can use "lvextend" for devices under LVM, or "gparted" to modify the partition, and use the "resize2fs" command to adjust the file system, even while the mounted volume is online.

  • Partition size for clones

    Hi all
    in preparing an external drive to clone (CC Cloner) both my macbook pro and g5 would people recommend partition sizes on the external that matchthe physical size of the drives to be cloned or partition sizes that match the data used on the drives to be cloned plus a bit of free space ?
    Kind Regards
    Eric

    At least 44GB, with more depending on
    what you do
    amount of RAM
    64-bit (very slightly larger but better memory management)
    page file
    hibernation
    Just room to breath is a factor.
    SP1 and above require 10GB of free space
    Any OS needs a 20% free space to function properly
    What MS and Apple post are not partition sizes but how large Windows 7 is (16GB for 32-bit, 20GB for 64-bit) though.
    apps, data, cache, thumbnails, photos, etc on top of that.
    And how small your hard drive free space. You need to leave OS X with free space to function and grow too.
    There is a forum for Windows on Mac / Boot Camp, and there is a forum for MacBook Pro owners too (not workstation community this was in)

Maybe you are looking for