With Apple configurator, how to set AirPrint to print IPPS

Dear Community,
My office wish to setup Airprint with Ipads.
My IT, however blocked the mDNS
I manage to use Apple Configurator to config the AirPrint.
it now show IPP://192.168.1.101/printers/AirPrint
I heard that airprint support IPPS.
I am wondering how I can achieve this?
In my print server, I already have IPPS setup for Windows.
Regards,
GoRay

I assume you meant IPP not IPPS
see the section on "Legacy printer support"
http://en.wikipedia.org/wiki/AirPrint
My IT, however blocked the mDNS
Talk to them. Progress is making changes.  Remember, IT didn't approve of PCs.
You need the AirPrint version of IPP.  You need a means of communicating over wifi with your printers.
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers.  Look in the app store
-- install enabling software on a computer which you have connected the printer
on your iPad install the Helper app -- /print n share
This should/may get around the mDNS blockage.
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
on your server
For Windows, try:
   O'Print
      http://oprintware.com/
   PrintCentral
     PrintCentral is the supreme printing app for the iPad, iPhone or iPod Touch
     A real DEBE -- does everything but eat.
     http://mobile.eurosmartz.com/products/printcentral.html
Mac and Windows
"WePrint enables printing to shared printers for iOS/Android devices from our range of printing Apps."
http://mobile.eurosmartz.com/downloads.html
You need a means of communicating over wifi with your printers.
You will need to avoid going through your existing wifi routers. You will note that you will need to be in direct wifi range of the printer or print server. Wifi range in a building is about a 100 feet.
solutions ( your IT may not like this.  Be sure your boss approves of these solutions. )
-- install wifi donge on your print servers.  This will give you a direct wifi path to your printer servers
-- buy a new printer that supports adhock printing.
-- install the airprint software on some pc with wifi.  The software will forward your print job to the real printer.
More info
For a comprehensive list of links,
   see Texas Mac Man list:
     https://discussions.apple.com/message/21291967#21291967
   or
     http://ipadhowtouseit.com/ipad-printing/

Similar Messages

  • In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

    In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

    Hi jshira86,
    You can definitely have different sets of iPads with different apps loaded. When you "supervise" your iPads, you will see that on the left side of the Configurator window there is a "+" sign in the lower left corner. Click it to create a new device group. With this new device group you can choose what apps and configuration profiles you want to install on that group of iPads. Create as many groups as you want to customize the apps and profiles you want on them.
    Hope this answers your question!
    ~Joe

  • How can I import photos from iPod that is supervised with Apple Configurator?

    I have configured a set of iPod Touches (and iPads) with Apple Configurator. User can take photos. But when the iPods are attached to a PC or Mac (including the Mac they were configured on), no pictures are visible or downloadable. The photos are visible in the Photos app on the iPod. What's happening?

    Anthony,
    I have found a workaround that just worked for me with iPads,
    Connect the iPad to the computer that supervises it, take screen shots (home key and off key pressed together) of the photos as they are displayed in Photos on your iPad and then they will be seen when you launch iPhoto on the host computer.
    It takes some time, but may be worth it, I just took screen shots of about 70 photos and they are now in iPhoto so I can export them now and use them.
    It took me 15 minutes.
    Hope this helps, Darryl

  • I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I've just seen this message for the first time and it's showing on 10 devices.
    What I really love about Apple Configurator is the copious amount of context driven help offered to you.
    "Unable to send ClearPasscode command to device.
    The device was disconnected.
    Check the USB connection to the device."

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

  • Setting/keeping a static IP on iPad with Apple Configurator?

    Hey there
    We are just getting some iPads into our school and I have been configuring them with Apple Configurator which has gone pretty well so far.
    The problem I am having is that each of our iPads has to be assigned a Static IP address (for web filtering reasons) and each time I plug the iPad back in for a refresh or for a new install of an app the iPad switches back to DHCP and I have to manually type the static IP back in.
    This is rapidly become a pain the more iPads we get in, is there a way to set Configurator to either leave the IP settings alone or to set it so that it pre-fills the static IP settings?  I've looked through all the profile options and nothing jumps out!
    Any help would be greatly appreciated
    Neal

    Configuration profiles do not allow you to apply a static IP address to a device.
    Instead, it would be highly recommended to configure static IP addressing within the DHCP server itself. This would accomplish what you want without worrying about which proifle goes on what device, etc. Configurator can also export the MAC addresses to make life easier in setting this up.
    Right click the 'All Devices' in the Supervise tab, click Export Info > Device Information > WiFi MAC Address.

  • How do I distribute Pages with Apple Configurator?

    In my school we have 15 iPads and I want to install Pages, Keynote, Numbers onto them with Apple Configurator. When viewing the ipad apps in the App Store on my iMac, it doesn't show them as free, but it does if I view them on the app store on an iPad. I purchased the free apps on an iPad so it linked them to my account, and I was then able to download it to my iMac. However, when I try and distribute them using Apple Configurator, it's asking for redemption codes. I can install them fine individually on each iPad, but they're around 1GB in total to download, I'd rather only have to do this once and send them to all iPads rather than downloading it 15 times.
    Thanks.

    I came across this problem again the other day when I download an app that was free for a limited time.
    I've started using Apple Configurator purely for iOS updates and installing a profile containing Wi-Fi settings etc. I have been using iTunes to manage apps which is a lot more powerful. After downloading the apps thtrough iTunes onto my Mac, I can then distribute all of the apps to the iPads via USB (the iPad's are stored in a Griffin small cabinet that acts as as USB hub) and I can manage them all at once. It takes a while to transfer, but its quicker than downloading 5+GB on each iPad, and iTunes allows you to manage app folders as well.

  • Problems with Apple Configurator and app lock.

    Hello Folks!
    I'm using a bunch of iPod Touch of the 4th generation (iOS 6). I locked them in an app with apple configurator 1.1.2. From time to time I get a message: The guided access is not available any more, contact administrator.
    Reconnecting to the maintance laptop solves the problem.
    How can I prevent this?
    Thanks
    Nils

    I recommend posting in the iPhone or iPad for the Enterprise forums

  • Frequently I will be asked to sign in to my Apple account, but it is using an email I don't use with Apple. How can I get this to stop?

    I use an iPod4 Touch and am using IOS 6.1.6. Frequently I will be asked to sign in to my Apple account, but it is using an email I don't use with Apple. How can I get this to stop? This is happening repeatedly throughout the day. I don't have an Apple password for this email address, nor do I want one!

    Maybe an App that needs updating was purchased by that account?
    Could someone have installed an app not purchased with your account?
    Can you post a screen shot of the message?

  • The crystal screen of my ipad mini broke after I accidentally droped it.  Does anyone know if it can be fixed directly with Apple?  How much will it cost to get it fixed/replaced?

    The crystal screen of my ipad mini broke after I accidentally droped it.  Does anyone know if it can be fixed directly with Apple?  How much will it cost to get it fixed/replaced?

    "Abuse" includes dropping it. If it's not a manufacturing fault: These prices are roughly the same in other coutries to the US.
    Out-of-Warranty Service     If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.      
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
         A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
              Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPad is eligible for Out-of-Warranty service. Replacement iPads have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see the AppleCare+ for iPad and Apple Repair Terms And Conditions for further details.

  • Can i setup airplay on my apple tv with apple configurator

    Hello
    Can i setup airplay on my apple tv with apple configurator?

    Arris NVG589
    This is a full modem gateway router.. so it should always stay as the main router.
    i put the tc on bridge and now the ethernet cable is blinking amber at the ATT modem.
    The setup as far as you have described it is correct.. but the ethernet link is apparently down.. this is a common problem on the AC model TC.
    Can you give me the actual TC model as well.. sorry I should have asked in the first post more explicitly.
    If it is the tall AC one just say.. AC.
    Do you have the ethernet cord plugged into the WAN port of the TC.. ?? Please move it to any of the LAN ports.. see what happens.. it should link and have a solid green light on the TC port and the Arris..
    Your TC should pickup an IP from the Arris and should have no problems.. or minor ones..
    Please give me the summary screenshot from your TC..
    It should look like this.

  • Device Enrollment Manager and Bulk Enrollment with Apple Configurator

    Hello,
    Regarding the Device Enrollment Manager and Bulk Enrollment with Apple Configurator features released with Microsoft Intune in november/december 2014:
    When will these features be available for the Intune hybrid parity? (Intune + SCCM 2012 R2)
    We would really like to utilize the Device Enrollment Manager user account for shared device scenarios and the bulk enrollment feature to deploy multiple IOS devices to classroom iPads but we are "on hold" for now until these features will be released
    for the hybrid parity version of Intune.
    https://technet.microsoft.com/nb-no/library/dn764961.aspx
    https://technet.microsoft.com/nb-no/library/dn764958.aspx

    There is no information available about when new features will be released. Probably this will be available in either a future CU, or vNext. Looking at the possible impact of that change, I would guess vNext.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Problems with Apple Configurator

    I've been having trouble with Apple Configurator lately. For reference, the devices are not being supervised. They are just being restored from a backup file with four profiles, and two free applications. The backup file is fairly large - coming in at 12.9GB. Using a Mac Mini with around 150GB of free HD space. I'm using a Bretford tray so I usually try to plug in 10 devices at once. This has worked in the past and have only recently run into problems since the update to Configurator 1.4.2 and/or iOS7. So, I'm able to to run Configurator with 10 devices plugged in (I've since started only plugging in 6) and no matter what I try I cannot get more than 4 devices to successfully complete. And actually about half the time less than 4 actually complete successfully. The error I'm getting is Code 4 and the description just says "unable to restore backup." It takes about an 45 minutes to complete one device and about double that to complete 10. So getting 10 done at once is a huge time saver. When I'm only getting 4 devices completed and many time less than that at almost an hour, it is absolutely maddening. I've tried every combination of restarting and reinstalling Apple Config and still the problem exists. 
    I have a constant stockpile of iPads, Minis, and iTouches coming in so it would be extremely greatful if anyone had any tips or advice.
    Additional questions regaurding Apple Config.
    1. Is there any way to install multiple profiles on multiple devices on the newest version (1.4.2)? It seems like the new version only allows you to install 1 profile on multiple devices or multiple profiles on 1 device.
    2. Everytime a backup fails, Apple Config saves that backup in the MobileSync folder buried in the Containers folder. Each of there backups is almost 13GBs, so I'm having to constantly delete them to conserve HD space inorder to run so many devices at the same time. Is there anyway to prevent this from happening or auto delete failed backup restores?
    I know this is very long winded but I wanted to get as much on my info out there as I could. Anyway, thanks for any help that anyone can provide!

    I recommend posting in the iPhone or iPad for the Enterprise forums

  • How to set up Canon printer via Netgear print server ps121 on new macbook

    I have bought a new Macbook (OS10.4.8). The Apple store gives a good deal if you buy a Canon ip4300 with it but I am having problems figuring out how to set up the printer to work thru my Netgear print server on my Netgear network. Can anybody advise:
    1. I know my print server is on port 192.168.1.5, but what kind of settings do I use, IPP or LPT or something else?
    2. Why can I not find the driver for the ip4300, even though I have used the CD that came with the printer and run the install program and the printer DOES work when I plug it directly into the USB port. Why does the Macbook come with drivers already installed for only a few ancient BJ Canons and why won't it show me where the driver for the ip4300 is since it is obviously already on the machine?
    I know Netgear treats its customers with contempt (Linksys even worse). But I would expect a little more simplicity from Canon and Apple. I know I am an orangutan but it still seems incredibly difficult, as if they have hidden the printer driver on the computer and as if Apple does not want you to install networked printers. Please don't tell me to RTFM, I have read the Canon manual, it tells you how to network with Windows, does not even mention Mac. Any advice appreciated.
    Macbook   Mac OS X (10.4.8)   Netgear PS121, Netgear WGT624v3 router, Canon ip4300 printer

    Hi zoevancouver,
    If you are not able to set up your Canon MP460 printer, take a look at the article below.  There is a link to the Canon website and compatible printers.  Since this particular model is not on the list, you may need to contact Canon for additional support.
    OS X: Printer and scanner software available for download - Apple Support
    https://support.apple.com/en-us/HT201465
    Regards,
    - Judy

  • Adobe Reader XI...How to set it to Print as Image as default

    Hello I  using Windows 7 64 bits version and using Adobe Reader XI. I need to know how to set reader to Print As Image to default. Is there registry setting in windows or VB script that can do it?  I alread found it in version. I need to find it this in Version XI. Any usefull solution or suggestions would be helpful.
    Thanks

      Are you using the Organizer? If you have imported your photos into the organizer it’s possible to select thumbnails and then on the top menu click Edit à Edit With Photoshop Elements
      Click to view

Maybe you are looking for