With using the Union oper. query
Hi Team
I have table like A and B
A table Structure
C1-------C2-------C3
R1-------R2--------R3
R4-------R5---------R6
B table Structure
C1-----C2
R11----R8
my output is like below
C1-------C2-------C3
R1-------R2--------R3
R4-------R5---------R6
R11----R8----------null
i can use the Union all condition i don't want to use the
union all condition who? plz help
select c1,c2,c3
union
select c1,c2;
870003 wrote:
Hi Team
I have table like A and B
A table Structure
C1-------C2-------C3
R1-------R2--------R3
R4-------R5---------R6
B table Structure
C1-----C2
R11----R8
my output is like below
C1-------C2-------C3
R1-------R2--------R3
R4-------R5---------R6
R11----R8----------null
i can use the Union all condition i don't want to use the
union all condition who? plz helpWhy don't you want to use union all, because that is exactly what you are trying to achieve?
Similar Messages
-
Select Performance problems using the 'like' operator
I have a PL/SQL procedure that uses a cursor which contains a 'like' operator in the where clause. I have two database instances that are theoretically the same, however this code processes about 100,000 rows in 5 minutes on one database and 100,000 rows in several weeks on the other database. I know it is the 'like' operator that is causing the problem, but I don't know where to look in the database setup parameters as to what could be different between the two. Can someone point me in the right direction?
I tried to think of another way to write the query, but I really need to use the wildcard option on the data I'm searching for. The system I'm working with attaches a suffix to the end of every ID (ie. '214-222-1234-0') The suffix ('-0') increments but the rest of the ID stays the same ('-1','-2',etc...), but I want to find all of the rows where the first 12 characters are the same, so I strip off the suffix and use a wildcard '%' in its place. I tried adding the SUBSTR() function to the left hand column of the where clause, but it was even slower than using the 'like' operator. I know its a sound query, I just can't figure out why it works fine on one database and not the other.
-
Issues with using the output redirection character with newer NXOS versions?
Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system: version 4.1(1b)
system image file is: bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time: 10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system: version 3.2(1a)
system image file is: bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time: 9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successfulPlease check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards... -
Using the "as" operator vs casting?
I've recently been reading the docs regarding data types in
AS3 and am still not clear on a few things. If anyone has blogged
on this, please point me there.
One problem is that "casting" syntax is the same as top-level
function syntax. Compare String(objString) to XML(event.result).
The latter is a top-level function, but the former is a "cast". Or
is it?
An option to the String cast is objString.toString(). What is
the difference? I am not so much interested in the underlying
details of the language, as in understanding when to use which.
The same question exists for the top-level function
XML(event.result), which can be done with the "as" operator:
event.result as XML. When to use which? Are there performance
issues? The "as operator" documentation is unsatisfying.
Any discussion of this will be appreciated.
TracyActionScript 3.0 has the
as operator because it circumvents a deficiency with the
cast operation () in ActionScript. Consider this:
var a:Object = new Array(1,2,3,4);
var b:Array = Array(a);
What is b? It is an Array of 1 element: [ [1,2,3,4] ];
The
as operator takes care of this:
var b:Array = a as Array;
The actual difference in the operators is that if the
variable being cast is not of the proper type, the
as operator returns null while the () operator throws an
exception:
var j:Number = Number(a); // exception!
var k:Number = a as Number; // NaN in this case, but null
normally
The feeling here at Adobe is to use the
as operator since it is not ambiguous and just check for
null. If you prefer to catch exceptions and know when X(y) is a
cast vs a conversion, then use that. More of a preference but at
times only
as will do what you need. -
How to use the same POWL query for multiple users
Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
SandhyaBatch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..
-
How can I use the update operation in a VC Model
Hello experts,
i try to to use the update operation in my VC model. I have developed an AS wich return a table. Now i want to update a table row. So I add the update operation to my model. But it doesn´t work. I mapped all attribute between the table and the update service. The event name is submit.
Another strange thing is: If i try to update in the service browser it cames the error message that the vandatory attribute ... is missing.
Any ideas??
Thanks
MarcoHi Marco,
In this case it is possible that your update service requires a mandatory parameter which you are not providing.
When you drag your service onto the VC screen, right click on the service and test it.It will give you a clear picture of which parameters are required by the service and besides you can also use some test data to check if the service is working properly.
Do let me know if this helps.
Thanks,
Gaurav. -
How can i plot a histogram with using the results of Line Length
PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
JOptionPane.showMessageDialog(this,
" Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
"Programin kullanim detaylari",
JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
out.println("---Kelime Avcisinin Sonuclari---");
String line = infile.readLine();
while (line != null){
int len = line.length();
linenum++;
line = infile.readLine();
out.println("Line Length :" + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
if (start == false)
Satirlar++;
Kelimeler++;
start = true;
break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
Rakamlar++; }
}// switch
}//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
out.println("Satir sayisi: "+ Satirlar);
out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
% -
SSRS Expression for Conditional Filtering using the "IN" operator
Hello,
I need to filter my dataset based on a parameter:
If Period= 1 then Week must be in (W1, W2, W3), Else Week must be in (W10, W20, W30)
I tried using the "IN" operator but don't know how to create the expression for the "Value" field. I tried the following:
iif(Parameters!Period.Value = 1,
"W1, W2, W3",
"W10, W20, W30")
But it doesn't work.
Expression: Week
Operator: IN
Value: ???
Any help would be highly appreciated!Hi,
Use split function.
See this expression: IIF(Parameters!Period.Value = 1, SPLIT("W1,W2,W3",","), SPLIT("W10,W20,W30",","))
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8da78c9b-7f0c-42f1-a9c4-82f065f317c9/using-the-in-operator-in-ssrs-expressions
Thanks Shiven:) If Answer is Helpful, Please Vote -
i don't understand why i cant log in to my fb account using mozilla but with googlechrome i am able to do that.. mozilla can load up the fb site but cannot log in to my fb account.. i am comfortable with using the mozilla as my browser.. pls help thanks
hey thanks alot.. it helped me alot!! bring it on!!! cheers!!!
-
I am having problem with using the Basic brush definition
I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)
for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.
-
Using the "this" operator to pass variable references among classes and met
Hi guys still trying to understand how to use the "this" operator
can some one tell what I am doing wrong or just make this work for me to see how it works.
public class ReferencePassing
public static void main(String[]args)
ReferencePassing rp = new ReferencePassing();
System.out.println(rp);
public ReferencePassing()
HelperObject ho = new HelperObject(this);
System.out.println(this);
class HelperObject
private ReferencePassing MyReferencePassingBuddy;
public HelperObject (ReferencePassing theRp);
MyReferencePassingBuddy = theRp;
print();
public void print()
System.out.println(MyReferencePassingBuddy);
}Hi guys still trying to understand how to use the "this" operatorYou're still trying to understand how to write methods and constructors.
public HelperObject (ReferencePassing theRp);Syntax error at ';'.
MyReferencePassingBuddy = theRp;
print();
public void print()Syntax error: '}' expected. -
The issue with using the multiple columns sub-query in WHERE clause
Hi All,
my database version is 10.2.
the problem i am trying to deal with is that when I use multiple column sub-query in the WHERE clause of the SELECT statement, the actual row number returned from the sub-query is different from the whole statement.
And what I found is that, whenever there is NULL in any of those columns returned from the SUB-QUERY, the outer query will just return NULL for that whole row.
Here is an example:
select empno, ename, job, mgr, hiredate, sal, deptno from EMP
intersect
select empno, ename, job, mgr, hiredate, sal, deptno from t;
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7839 KING PRESIDENT NULL 17-NOV-81 5000 10
7934 MILLER CLERK 7782 23-JAN-82 1300 10
select * from EMP where (EMPNO, ENAME, job, MGR, HIREDATE, SAL, DEPTNO) in (
select empno, ename, job, mgr, hiredate, sal, deptno from EMP
intersect
select empno, ename, job, mgr, hiredate, sal, deptno from t);
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7934 MILLER CLERK 7782 23-JAN-82 1300 10 If I specifically deal with the NULL situations for the columns which might return NULL, I can get the result right.
select * from EMP where (EMPNO, ENAME, job, NVL(MGR,-1), HIREDATE, SAL, DEPTNO) in (
select empno, ename, job, nvl(mgr,-1), hiredate, sal, deptno from EMP
intersect
select empno, ename, job, nvl(mgr,-1), hiredate, sal, deptno from t);
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7839 KING PRESIDENT null 17-NOV-81 5000 10
7934 MILLER CLERK 7782 23-JAN-82 1300 10 the problem is that, I feel this is a very lame way of handling it.
So, I wonder or am asking if there is any better or standard way to do it?
any help would be highly appreciated.
ThanksHi,
As you discovered, INTERSECT treats NULL as a value, but IN does not.
What you did with NVL is one way to handle the situation. If there was a chance that any of the columns could be NULL, then you might prefer something like this:
select *
from EMP
where ( EMPNO || '~' ||
ENAME || '~' ||
job || '~' ||
MGR || '~' ||
TO_CHAR (HIREDATE, 'DD-MON-YYYY HH24:MI:SS')
|| '~' ||
SAL || '~' ||
DEPTNO
) in (
select EMPNO || '~' ||
ENAME || '~' ||
job || '~' ||
MGR || '~' ||
TO_CHAR (HIREDATE, 'DD-MON-YYYY HH24:MI:SS')
|| '~' ||
SAL || '~' ||
DEPTNO
from emp
intersect
select EMPNO || '~' ||
ENAME || '~' ||
job || '~' ||
MGR || '~' ||
TO_CHAR (HIREDATE, 'DD-MON-YYYY HH24:MI:SS')
|| '~' ||
SAL || '~' ||
DEPTNO
from t
);This assumes that you can identify some string (I used '~') that never occurs in the strings in these tables.
This is implicitly converting the NUMBERs. That's usually not a good thing to do. but explicitly converting them would make this even more tedious.
You should explicitly convert any DATEs to strings, however. Depending on your default format, and your data, you might get away with implicit conversions even for DATEs, but don't bet on it.
If you had to do this often, you might consider writing a user-defined function:
delimited_string (empno, ename, job, mgr, hiredate, sal, deptno) would return a string like
'7839~KING~PRESIDENT~~17-NOV-1981~5000~10'
This will make the coding easier, but beware: it will make the execution slower. -
I am very new to oracle and am working with the minus operator to run a query. I could use some help!
Here is the query I am working on:
select suppliername, partname
from quote
where partname = 'hammer'
minus
select suppliername, partname
from quote
where partname = 'hammer';
HOW DO I GET THE QUERY TO DISPLAY ONLY THE ROWS OF SUPPLIERNAMES THAT SUPPLY ONLY HAMMERS?
I WOULD GREATLY APPRECIATE SOME CLARIFICATION.HOW DO I GET THE QUERY TO DISPLAY ONLY THE ROWS OF SUPPLIERNAMES THAT SUPPLY ONLY HAMMERS?It may, for some data related reason, give you the result you were expecting, but this query does not answer that question because you have included partname in the MINUS.
E.g.
WITH quote AS
(SELECT 'BOB' suppliername, 'HAMMER' partname FROM DUAL UNION ALL
SELECT 'BOB' suppliername, 'SPANNER' partname FROM DUAL UNION ALL
SELECT 'TIM' suppliername, 'HAMMER' partname FROM DUAL UNION ALL
SELECT 'JACK' suppliername, 'HAMMER' partname FROM DUAL)
SELECT suppliername, partname
FROM quote
MINUS
SELECT suppliername, partname
FROM quote
WHERE partname != 'HAMMER';
SUPPLIERNAME PARTNAME
BOB HAMMER
JACK HAMMER
TIM HAMMER Clearly this is wrong because Bob supplies spanners (aka wrench).
However:
WITH quote AS
(SELECT 'BOB' suppliername, 'HAMMER' partname FROM DUAL UNION ALL
SELECT 'BOB' suppliername, 'SPANNER' partname FROM DUAL UNION ALL
SELECT 'TIM' suppliername, 'HAMMER' partname FROM DUAL UNION ALL
SELECT 'JACK' suppliername, 'HAMMER' partname FROM DUAL)
SELECT suppliername
FROM quote
MINUS
SELECT suppliername
FROM quote
WHERE partname != 'HAMMER';
SUPPLIERNAME
JACK
TIM Amongst the many alternatives - NOT EXISTS:
WITH quote AS
(SELECT 'BOB' suppliername, 'HAMMER' partname FROM DUAL UNION ALL
SELECT 'BOB' suppliername, 'SPANNER' partname FROM DUAL UNION ALL
SELECT 'TIM' suppliername, 'HAMMER' partname FROM DUAL UNION ALL
SELECT 'JACK' suppliername, 'HAMMER' partname FROM DUAL)
SELECT *
FROM quote q1
WHERE NOT EXISTS (SELECT 1
FROM quote q2
WHERE q2.suppliername = q1.suppliername
AND partname != 'HAMMER');
SUPPLIERNAME PARTNAME
JACK HAMMER
TIM HAMMER -
How do I use the ? operator in JSF tag attributes?
I want to do something like this:
<h:inputText styleClass="${myBean.valid ? 'styleA' : styleB'}" ...>
What do I have to do to use this Expression language?
With the #{...} expression the ? operator doesnt seem to be available.
When I use the ${...} expression I am getting this error:
javax.servlet.ServletException: ServletException in '/WEB-INF/body/Test.jsp': /WEB-INF/body/Test.jsp(12,5) According to TLD or attribute directive in tag file, attribute styleClass does not accept any expressions
javax.faces.webapp.FacesServlet.service(FacesServlet.java:121)
Can anybody please help?
Thanks!Personally, i'd do:
<h:inputText styleClass="styleA" rendered="#{myBean.valid}"/>
<h:inputText styleClass="styleB" rendered="#{!myBean.valid}"/> -
Error in Automated activity of BPM using the PI operation mapping.
Dear Experts,
We have a BPM process, where we have imported Operation Mapping, to use it in an automated activity. We have created the service reference with localhost and checked the local provider system check box and with type WS.
While running the scenario the process stops at the automated activity (having the Operation mapping), with error:
A technical error during invocation: Could not invoke service reference name
I have tried to recreate the step couple of times but it is always the same error.
Could you please share your expertise in how to over come the error.
Thank you,
Best Regards,
AjayHi Ganesh,
Thanks for your response.
SOAP and Mail scenario are also using the same inbound proxy structure , and the proxy is working fine in both cases.
For FTP scenario we are reusing the same inbound proxy but we are facing error .
SAP is getting
"XML to ABAP Conversion error with error id as "CX_ST_MATCH_ELEMENT " System expected the element 'Namespace of the inbound service interface' .
Please guide.
Thanks,
Ruchi
Maybe you are looking for
-
Safari Hangs when multiple tabs and windows open [was part of safari slow-]
This is to create a new topic with regards to Safari, but with many windows and/or tabs open. Some have posted information in the previous topic, i.e.: safari slow - has anyone talked to someone at Apple? This post will be specifically about hangs an
-
Insert Insert XML file into multiple records in Oracle Database
I would like to find out if it is possible to insert a single XML file into multiple records or tuples in a Oracle database table. I have a single XML file which is at multiple levels. The meta data for the levels are common and each level can have m
-
HT2477 how can I connect a Garmin GPS etrex vista hcx to macbook pro with retina.
I would like to know if is it possible to connect my GPS Garmin etrex vista hcx to my macbook pro with retina. Thanks.
-
Automating work flow with Shared Reviews
Is there a way to manage the work flow with shared reviews? In other words, I have a pdf document I need to send out for review. I have several people on my review team, and I want them to look at in in sequence rather than all at the same time. Pers
-
Multiple hierarchies with a shared higher level in OBIEE
Hello all, I'm trying to create multiple hierarchies for a shared dimension in OBIEE. I have gotten these to work in the past when each hierarchy for the dimension all shares the common "grand total" level at the top, but I now I'd like multiple hier