WLC 2500 Series: differences between 7.0 and 7.2 Firmwares?

Hello everybody.
I'm quite new to Cisco WLAN Controllers, thus I'm asking now (as I have to configure one from ground on): which differences exist between 7.0 and 7.2 firmwares? I have to decide/choose which of them to run, before continuing to configure my WLAN infrastructure.
Thanks in advance and kind regards,
F.

If this is a brand new install the answer is simple in my mind, go with 7.2. There are a lot of neat features in 7.2 that are not in 7.0, plus 7.0 is on maintenance releases only now, 7.2 is the new main code for supporting the newer WLCs. Besides TAC generally wants you to upgrade to the latest if you call them for help so you might as well get started on the new code now when you don't have to worry about bringing the networks down to upgrade.
Sent from Cisco Technical Support iPad App

Similar Messages

Difference between booked items and requested items

Hi Gurus,
I wanted to understand the difference between
Booking History - booked items – booked date
Booking History – requested items –booked date
The Series definition has the same definition given in the hint. I checked one of the below links for the same topic but couldn't get a full view.
Which series go to Actual_quantity in Standrad collections
Can any one let me know what the difference between booked items and requested items is? As I understand in OM, we have no differentiation. Do let me know
Thanks
DNP

Hi
In normal circumstances, there is no difference between requested item vs. booked item. But if you're using Item Substitution, these could be different. For example, a customer may call to request item A but for multiple reasons it may be substituted by a different item (usually an upgrade with similar form, function etc).
Oracle APS supports this functionality out of box in order promising and ASCP where it can be done based on a pre-defined relationship based on availability etc.
Hope this answers your question, please feel free to let me know if I may help calrify further
Navneet Goel
Inspirage
[email protected]

Question about main difference between Java bean and Java class in JSP

Hi All,
I am new to Java Bean and wonder what is the main difference to use a Bean or an Object in the jsp. I have search on the forum and find some post also asking the question but still answer my doubt. Indeed, what is the real advantage of using bean in jsp.
Let me give an example to illustrate my question:
<code>
<%@ page errorPage="errorpage.jsp" %>
<%@ page import="ShoppingCart" %>

<jsp:useBean id="cart" scope="session" class="ShoppingCart" />
<html>
<head><title>Shopping Cart</title></head>
<body bgcolor="#FFFFFF">
Your cart's ID is: <%=cart.getId()%>.
</body>
<html>
</code>
In the above code, I can also create a object of ShoppingCart by new operator then get the id at the following way.
<code>
<%
ShoppingCart cart = new ShoppingCart();
out.println(cart.getId());
%>
</code>
Now my question is what is the difference between the two method? As in my mind, a normal class can also have it setter and getter methods for its properties. But someone may say that, there is a scope="session", which can be declared in an normal object. It may be a point but it can be easily solved but putting the object in session by "session.setAttribute("cart", cart)".
I have been searching on this issue on the internet for a long time and most of them just say someting like "persistance of state", "bean follow some conventions of naming", "bean must implement ser" and so on. All of above can be solved by other means, for example, a normal class can also follow the convention. I am really get confused with it, and really want to know what is the main point(s) of using the java bean.
Any help will be highly apprecaited. Thanks!!!
Best Regards,
Alex

Hi All,
I am new to Java Bean and wonder what is the main
difference to use a Bean or an Object in the jsp. The first thing to realize is that JavaBeans are just Plain Old Java Objects (POJOs) that follow a specific set of semantics (get/set methods, etc...). So what is the difference between a Bean and an Object? Nothing.
<jsp:useBean id="cart" scope="session" class="ShoppingCart" />
In the above code, I can also create a object of
ShoppingCart by new operator then get the id at the
following way.
ShoppingCart cart = new ShoppingCart();
out.println(cart.getId());
...Sure you could. And if the Cart was in a package (it has to be) you also need to put an import statement in. Oh, and to make sure the object is accessable in the same scope, you have to put it into the PageContext scope. And to totally equal, you first check to see if that object already exists in scope. So to get the equivalant of this:
<jsp:useBean id="cart" class="my.pack.ShoppingCart"/>Then your scriptlet looks like this:
<%@ page import="my.pack.ShoppingCart %>
<%
ShoppingCart cart = pageContext.getAttribute("cart");
if (cart == null) {
 cart = new ShoppingCart();
 pageContext.setAttribute("cart", cart);
%>So it is a lot more work.
As in my mind, a normal class can also
have it setter and getter methods for its properties.True ... See below.
But someone may say that, there is a scope="session",
which can be declared in an normal object.As long as the object is serializeable, yes.
It may be
a point but it can be easily solved but putting the
object in session by "session.setAttribute("cart",
cart)".Possible, but if the object isn't serializable it can be unsafe. As the point I mentioned above, the useBean tag allows you to check if the bean exists already, and use that, or make a new one if it does not yet exist in one line. A lot easier than the code you need to use otherwise.
I have been searching on this issue on the internet
for a long time and most of them just say someting
like "persistance of state", "bean follow some
conventions of naming", "bean must implement ser" and
so on. Right, that would go along the lines of the definition of what a JavaBean is.
All of above can be solved by other means, for
example, a normal class can also follow the
convention. And if it does - then it is a JavaBean! A JavaBean is any Object whose class definition would include all of the following:
1) A public, no-argument constructor
2) Implements Serializeable
3) Properties are revealed through public mutator methods (void return type, start with 'set' have a single Object parameter list) and public accessor methods (Object return type, void parameter list, begin with 'get').
4) Contain any necessary event handling methods. Depending on the purpose of the bean, you may include event handlers for when the properties change.
I am really get confused with it, and
really want to know what is the main point(s) of
using the java bean.JavaBeans are normal objects that follow these conventions. Because they do, then you can access them through simplified means. For example, One way of having an object in session that contains data I want to print our might be:
<%@ page import="my.pack.ShoppingCart %>
<%
ShoppingCart cart = session.getAttribute("cart");
if (cart == null) {
 cart = new ShoppingCart();
 session.setAttribute("cart", cart);
%>Then later where I want to print a total:
<% out.print(cart.getTotal() %>Or, if the cart is a JavaBean I could do this:
<jsp:useBean id="cart" class="my.pack.ShoppingCart" scope="session"/>
Then later on:
<jsp:getProperty name="cart" property="total"/>
Or perhaps I want to set some properties on the object that I get off of the URL's parameter group. I could do this:
<%
ShoppingCart cart = session.getAttribute("cart");
if (cart == null) {
 cart = new ShoppingCart();
 cart.setCreditCard(request.getParameter("creditCard"));
 cart.setFirstName(request.getParameter("firstName"));
 cart.setLastName(request.getParameter("lastName"));
 cart.setBillingAddress1(request.getParameter("billingAddress1"));
 cart.setBillingAddress2(request.getParameter("billingAddress2"));
 cart.setZipCode(request.getParameter("zipCode"));
 cart.setRegion(request.getParameter("region"));
 cart.setCountry(request.getParameter("country"));
 pageContext.setAttribute("cart", cart);
 session.setAttribute("cart", cart);
}Or you could use:
<jsp:useBean id="cart" class="my.pack.ShoppingCart" scope="session">
<jsp:setProperty name="cart" property="*"/>
</jsp:useBean>The second seems easier to me.
It also allows you to use your objects in more varied cases - for example, JSTL (the standard tag libraries) and EL (expression language) only work with JavaBeans (objects that follow the JavaBeans conventions) because they expect objects to have the no-arg constuctor, and properties accessed/changed via getXXX and setXXX methods.
>
Any help will be highly apprecaited. Thanks!!!
Best Regards,
Alex

Difference between cisco887va-k9 and c887va-k9

Is there and if there is, what are the differences between cisco887va-k9 and c887va-k9?

Is there and if there is, what are the differences between cisco887va-k9 and c887va-k9?
C887VA-K9 is FANLESS.
Newer Cisco 880 Series (part numbers C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9, and C887VA-M-K9), which are fanless, providing a quiet, comfortable working environment in small offices

Difference Between Port Forwarding and Port Triggering.

Hi guys,
I'm lost! The differences between port forwarding and port triggering is driving me nuts! It all seems very subtle to me. Can anyone explain to me (in a very simple way) what exactly are their differences. Thanks in advance!!

Port Forwarding
The big difference between this and port triggering is that forwarding is fixed.. you forward a port and it is always forwarded.. IE available to connection.. basically the forwarded port is excluded from the fire walling abilities of the router. Second it is static and applies to one machine only. Whereas you could set port triggering to the router and thereafter any machine on the LAN can trigger it unless its already in use.. port forwarding must be specified for each individual machine.
Port forwarding requires you to give each PC on the network its own unique static IP address.. Although there is ssh port forwarding that can be set dynamically. Most users only have the option of static ip port forwarding.
The real downside of port forwarding is that it can be very tricky to set up... You may have to allow a series of ports on a machine and have to do that for each machine you want to allow through. Also routers often have limited abilities and may not allow you the ability to forward a port or select the service you require.
Port Triggering
This is a way of Dynamically assigning a service to a port WHEN it is required by an outgoing service. The port is initially not allowed so nothing can get in and you are protected by your network.
A good example of this is when using Yahoo! voice .. the voice works fine for a few minutes after you connect to Yahoo! then Yahoo! sends some kind of packet that requires a response from your PC... The packet is allowed in through your router no prob but the outgoing reply is not authorized to open a port on the router and is thus blocked.
'ope this helps

Difference between Storage Grain and Query Grain

What is the difference between Storage Grain and Query Grain ?
In the query below:
Select quarter, YearAgoSales:
Query grain: quarter
Time Series grain : year
what is the Storage Grain ?
As mentioned in Help Guide, Storage Grain is "grain of the aggregate source".
Regards,

storage grain: by its name is the grain of your source.
query grain: by its name is the grain at which you define your query.
based on the example you mentioned:
Though you have a source at day grain, you are querying at quarter level (which corresponds to query grain)....
mark posts promptly
-bifacts
http://www.obinotes.com

Difference between Port Channel and VPc

Hi Friends,
Could you please provide the difference between Port Channel and VPC.
Regards,
Zaheer

Read :)
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-3000-series-switches/white_paper_c11-685753.html
Virtual PortChannel Technology
Virtual PortChannels (vPCs) allow links that are physically connected to two different Cisco® switches to appear to a third downstream device to be coming from a single device and as part of a single PortChannel. The third device can be a switch, a server, or any other networking device that supports IEEE 802.3ad PortChannels.
Cisco NX-OS Software vPCs and Cisco Catalyst® Virtual Switching Systems (VSS) are similar technologies. For Cisco EtherChannel technology, the term “multichassis EtherChannel” (MCEC) refers to either technology interchangeably.
vPC allows the creation of Layer 2 PortChannels that span two switches. At the time of this writing, vPC is implemented on the Cisco Nexus® 7000 and 5000 Series platforms (with or without Cisco Nexus 2000 Series Fabric Extenders).

Difference between Enhancement Implementation and BadI Implementation

What is the difference between Enhancement Implementation and BadI Implementation?

Hi Rajendra Prasad,
Enhancement spot : It is the point where you can add your code. It can have multiple implementations. All the implementations can active at a time but the sequence of executions of the implementations can be anything.
(or)
Enhancement points are regions where can insert our code to suit customer needs...Spots are subsets of points and created inside these points..for an enhancement point multiple active spots can exist.
For enhacement-sections : the main idea is to provide a spot to customise the existing process..eg:SAP has done a select criteria..but you need to filter it more by adding a where condition..in that case SAP suggests using Enhancement sections..At any time the first active enhancement section works...even if multiple sections are created(though ideally multiple sections are not allowed to be created)..if you do the procedure below you can see that enhancement-section when a spot is created for it...the code in the parent section is copied and given in the editable mode
Creating spots implementations for points/sections are given below................................................................
to Create a spot in the standard code...click on the spiral icon..screen changes to a different color...place cursor on ENHANCEMENT-POINT/ENHANCEMENT-SECTION keyword of the spot you require to create implementation for...righ click -> "enhancement implementation -> "create" -> a table control comes -> at the bottom "CREATE" button to be clicked" ...give a name and text in customer name space and save -> select the same name just given in the table control ..press 'Tick' .....you will get a space where code can be written..write the code.....save and activate
Also check the following blogs on enhancement framework
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
The new Enhancement Framework Part 2 - What Else You Need to Know Before Building an Enhancement
How To Define a New BAdI Within the Enhancement Framework - Part 3 of the Series
How to implement a BAdI And How to Use a Filter - Part 4 of the Series on the New Enhancement Framework
Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
Please go through this link also.
implicit enhancement and explicit enhancement
Reward points if it helps you
Cheers,
Swamy Kunche

Difference between screen painter and module pool

Hi guys,
what's the difference between SCREEN PAINTER and MODULE POOL ....
can anyone plz give brief description ...
regards
venu

hi ,
As its said by many colleagues in SDN , there are not very major differences between Modulepools and screen painter .
The few differences are :
1) Module pool is nothing but a pool ( series ) of screens . and Screen painter ( SE51 ) is a tool used for creating/designing screens .
2) While creating a modulepool you even need to create a transaction and assign this module pool program else the mpool program doesnt work . I think this is place we can say they are different .
3) If at all you create a screen in screen painter ( SE51 ) , that doesnot function by its own , you need to assign it to any of the executable programs or modulepool programs .Here is again a difference .
Regards,
Ranjita ..
Message was edited by:
Ranjita Kar

Differences between 6500-E and 6500 chassis?

Can someone please provide a link to a Cisco url/document describing the differences between the 6500-E and 6500 series chassis? I've heard references to an increase in backplane/switch fabric throughput and also an increase in number of POE devices supported but nothing that can be verified on the Cisco site. Thank you in advance.

Long,
I have not seen a specific document that compares the 6500 and 6500-E Chassis.
The only major difference between the 6500 and 6500-E Chassis is the 6500-E series switches offer enhancements to scale beyond the 4000W power supply. The 6500-E provides higher density PoE deployments that require more power than the original 6500 chassis can deliver. My undertanding is, there is no difference in backplane throughput between the 6500 and 6500-E Chassis.
Cisco Catalyst 6500 and 6500-E Series Switch Data Sheet
http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a00800ff916.html
Let me know if it helps.
Regards,
Arul

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

WLC 2500 Series: differences between 7.0 and 7.2 Firmwares?

Similar Messages

Maybe you are looking for