WLS 9.2: State FAILED Health OK!
Hi,
I have seen instances where the Weblogic Server 9.2 Admin console shows the state of managed server as FAILED, but the health is OK. I wanted to know if this is how the console behaves (normally), as according to me the server health cannot be OK when it has failed.
I can only think of one thing, the server not responding to any health checks from the Admin Server and so the health showing the last available state (which is OK before server failed). But, I have seen this happen (ie Admin console showing state FAILED health OK) even an hour after the managed server failed (probably due to deadlocks).
Please help me comprehend this state better.
Thanks in advance
Vikas
hi,
once u refresh the page, that will automatically changes health status...
Similar Messages
-
Multicast Issues following R2 Upgrade - MCSIsapi failed Health Check
Hi all,
I am having yet more issues with multicasting following upgrading to SCCM 2012 R2. (running on Server 2008 R2).
I have tried several times now:
unticking all images marked for multicast
unticking all DPs from enable multicast
waiting for WDS to be removed
reboot
enable DP for multicast
wait for WDS to be installed
reboot
enable image for multicast
But when I run my task sequence the smsts.log does not recognise that I have a multicast enabled DP and begins to download via unicast.
extract from smsts.log:
<![LOG[Locations: Multicast = 0, HTTP = 1, SMB = 0.]LOG]!><time="10:13:18.066-60" date="07-08-2014" component="ApplyOperatingSystem" context="" type="1" thread="1244" file="resolvesource.cpp:2749">
On the server WDS is installed, running and looks healthy.
All the multicast logs look healthy apart from MCSIsapi.log which states:
Failed to perform health check (0x80004005)
HealthCheckRequest::HandleMessage failed with errorcode (0x80004005)
Failed to process HEALTHCHECK request for client ffffffff-ffff-ffff-ffff-ffffffffffff
MCSRequestHandler::HandleMessage for Op HEALTHCHECK failed with server errorcode 2052
I have all the MCS keys in the registry. SerializedMCSKey and SignedSerializedMCSKey are both populated.
Can anyone shed any light on how to overcome this issue?
Many thanks,
JayHi,
Quote:
"MCS had an error itself. If you look under the hklm/software/microsoft/syswow64/sms/mcs key you should have a long list of keys. I just had 3 one of which was empty
I had to do this to fix it
unchecked Allow this package to transfered via multicast at package/image properties
cleared SerializedMCSKey and SignedSerializedMCSKey in registry (HKLM\Software\SMS\MCS)
unchecked enable multicast at dp properties
checked enable multicast at dp properties
checked Allow this package to transfered via multicast at package/image properties
checked transfer this package only via multicast
Just running the mcs.msi or redeploying the DP doesnt work
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/e6ffd292-ca2b-4c4c-ae9a-b8ffa0afb3bd"
For more information:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4b443cb4-ebac-4870-9715-bcd8faa17cbf/mcsisapi-throwing-errors?forum=configmgrosd
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Import error imp-00017: following statement failed with oracle error 1659:
Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PMThanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error -
Calling another function if upate statement fails
Hi there,
I have written an update procedure and insert procedure. Is there a way of calling another function if the update statement fails? Thanks a lot for your help.
Chris
procedure update_costing(in_period in DATE,
in_project_id IN VARCHAR2,
in_user_id IN VARCHAR2,
in_thu IN VARCHAR2,
in_fri IN VARCHAR2,
in_sat IN VARCHAR2,
in_sun IN VARCHAR2,
in_mon IN VARCHAR2,
in_tue IN VARCHAR2,
in_wed IN VARCHAR2)
UPDATE TBL_COSTING
SET
HOURS_THU = to_date (in_thu, 'HH24:MI'),
HOURS_FRI = to_date (in_fri, 'HH24:MI'),
HOURS_SAT = to_date (in_sat, 'HH24:MI'),
HOURS_SUN = to_date (in_sun, 'HH24:MI'),
HOURS_MON = to_date (in_mon, 'HH24:MI'),
HOURS_TUE = to_date (in_tue, 'HH24:MI'),
HOURS_WED = to_date (in_wed, 'HH24:MI'),
WHERE PERIOD = in_period
AND PROJECT_ID = in_project_id
AND USER_ID = in_user_id;
EXCEPTION
--CALLL HERE THE INSERT FUNCTION WITH SAME DATAMEMBERS
SOMETHING LIKE THIS---
WHEN others then
insert_costing(in_period, in_project_id, in_user_id ,in_thu,in_fri,in_sat,in_sun,in_mon,in_tue,in_wed ,in_submit);
COMMIT;
END update_costing;begin
UPDATE statement
IF SQL%ROWCOUNT =0
then
INSERT statement|procedure
end if;
end;
/Hi,
i have a simple doubt over here, i read somewhere that cursor attributes can be used only as long as the cursor is open, then in the above case whiel doing the update operation, oracle implicitly will open an cursor and will do the operation and then will close the cursor, then how does SQL%ROWcount works???please revert...
cheere -
IMP-00017: following statement failed with ORACLE error 901:
Why I get these error messages while I do full import? Could anyone help me on this issue?
IMP-00017: following statement failed with ORACLE error 901:
"CREATE FORMAT92TRIG "
IMP-00003: ORACLE error 901 encountered
ORA-00901: invalid CREATE command
IMP-00008: unrecognized statement in the export file:
ýÿ$
Note:- I have used the same command to import the same export file to a different SID and it went fine but when I try to do import for SID (DEMO), I get the above mentioned errors.
Thanks
Rajesh KumarThanks for the clue
Got it right, when i changed the primary Oracle Home from 10gDS to 9iDB. 10gDS has a lower version of import as compared to 9iDB.
Rajesh -
IMP-00017: following statement failed with ORACLE error 2304
Hi,
in 9i DB when importing I have :
IMP-00017: following statement failed with ORACLE error 2304:
"CREATE TYPE "T_NUMBER" TIMESTAMP '2007-04-02:10:02:26' OID '6B4C21C0310143B"
"A97211E5E8301C09E' "
" as table of number"
IMP-00003: ORACLE error 2304 encountered
ORA-02304: invalid object identifier literal
Can any one please explaine me the problem and if possible a solution ?
Many thanks.The problem is explained in the metalink Note:113335.1
-
IMP-00017: following statement failed with ORACLE error 1849
Hi
We have a instance 11.1.0.7
while doing import i got the issue as:
IMP-00017: following statement failed with ORACLE error 1849:
"BEGIN "
"dbms_scheduler.create_job('"MAXIMOTSSYNC"',"
"job_type=>'STORED_PROCEDURE', job_action=>"
"'maximo_ts_job'"
", number_of_arguments=>0,"
"start_date=>'30-AUG-12 15.12.04.000000 +04:00', repeat_interval=> "
"'SYSDATE + 5/1440'"
", end_date=>NULL,"
"job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>TRUE,comments="
">"
"NULL"
"dbms_scheduler.enable('"MAXIMOTSSYNC"');"
"COMMIT; END;"
IMP-00003: ORACLE error 1849 encountered
ORA-01849: hour must be between 1 and 12
ORA-06512: at line 2
IMP-00091: Above error occurred on the following function and object: CREATE MAXIMOTSSYNC. Remaining PL/SQL blocks for this object will be skipped.
Import terminated successfully with warnings.
My imp command is:
imp system/manager file=schema.DMP log=schema.log fromuser=max touser=max
Please suggest on this
Thanks
ShaikORA-01849: hour must be between 1 and 12Error: ORA 1849
Text: hour must be between 1 and 12
Cause: An invalid hour was specified for a date using the 12-hour time format.
If a 12-hour format code (HH or HH12) is used, the specified hour must
be between 1 and 12.
Action: Enter an hour value between 1 and 12. -
IMP-00017: following statement failed with ORACLE error 1031
Hello,
I export a schema from prod (database A) and I try to imported to onther test database (databse B).
database A: single database - Non ASM - 10gR1
database B: RAC database - ASM -10gR2
To import database I use this:
imp osiris/b@osiris file=prod_osiris070601.dmp full=y ignore=y log=osiris.log
All the tables are imported withot problem but when he start to imprt views I get this error:
IMP-00017: following statement failed with ORACLE error 1031:
Can you please help?
Thanck you in advance.I thing that the problem is that the user can not create views!!!
I create the user normaly and I give him this rols: "CREATE SESSION", "CONNECT" and "RESOURCE"
it's ok?
. . importing table "ZIP_CODE" 70768 rows imported
IMP-00017: following statement failed with ORACLE error 1031:
"CREATE FORCE VIEW "OSIRIS"."DETAILED_FRANKING_SYSTEM_VIEW" "
" ("CONFIGURATION_SYSTEM_ID","SYSTEM_ID","DEVICE_SERIAL_NO","OPCO_DE"
"VICE_SERIAL_NO","STATUS","BO_CUST_ID","CUSTOMER_NAME","CUSTOMER_ADDRESS_NAM"
"E","CUSTOMER_STREET1","CUSTOMER_STREET2","CUSTOMER_STREET3","CUSTOMER_STREE"
"T4","CUSTOMER_CITY","CUSTOMER_STATE","CUSTOMER_ZIP4","CUSTOMER_ZIP","CUSTOM"
"ER_COUNTRY","CUSTOMER_NAME_CAP","CUSTOMER_ADDRESS_NAME_CAP","CUSTOMER_STREE"
"T1_CAP","CUSTOMER_STREET2_CAP","CUSTOMER_STREET3_CAP","CUSTOMER_STREET4_CAP"
"","CUSTOMER_ADDRESS_STREET_CAP","CUSTOMER_CITY_CAP","CUSTOMER_STATE_CAP","C"
"USTOMER_COUNTRY_CAP","INSTALL_ADDRESS_NAME","INSTALL_STREET1","INSTALL_STRE"
"ET2","INSTALL_STREET3","INSTALL_STREET4","INSTALL_CITY","INSTALL_STATE","IN"
"STALL_ZIP4","INSTALL_ZIP","INSTALL_COUNTRY","INSTALL_ADDRESS_NAME_CAP","INS"
"TALL_STREET1_CAP","INSTALL_STREET2_CAP","INSTALL_STREET3_CAP","INSTALL_STRE"
"ET4_CAP","INSTALL_ADDRESS_STREET_CAP","INSTALL_CITY_CAP","INSTALL_STATE_CAP"
"","INSTALL_COUNTRY_CAP","DESCRIPTION","CONFIG_MODEL_ID","TYPE","PART_NUMBER"
"AND DEVICE_SYSTEM.DEVICE_TYPE='METER'"
"AND US_SERIAL_NO_CONVERTER.DEVICE_SERIAL_NO(+) = DEVICE_SYSTEM.DEVICE_SERIA"
"L_NO"
IMP-00003: ORACLE error 1031 encountered
ORA-01031: insufficient privileges
IMP-00017: following statement failed with ORACLE error 942:
"GRANT DELETE ON "DETAILED_FRANKING_SYSTEM_VIEW" TO "APP""
IMP-00003: ORACLE error 942 encountered
Message was edited by:
ASkika -
IMP-00017: following statement failed with ORACLE error 1276
i have exported the full database without rows from live database and tried to import it into training database.
both use ASM file system.i have precreated tablespace in training database.
but im getting the error IMP-00017: following statement failed with ORACLE error 1276.
it tries to create tablesapce and datafile on live ASM location rather than creating it on training database ASM location.
live database asm location is WEBD and training database is at TRAIND.
it tries to import on WEBD RATHER THAN TRAIND and throws the error.
any help is appreciated.i have googled it and cant find anything helpful.
Im bit new to DBA stuff.
is there anyway to import and export data in ASM file system?
ThanksWhen datapump exports the tablespace information, all it knows about is the currently location of your datafiles. Let's take a simple example. Let's say you have tablespace foo with a file called foo.dbf and it lives in a windows directory c: if you are now trying to import that into a linux box, Data Pump does not know that. All it knows is that it needs to create the tablespace data file in c:. If you are changing the locations of the datafiles, you need to use remap_datafile=old_datafile:new_datafile ... in your impdp command. Or, precreate them and use exclude=tablespace. The old_datafile and new_datafile need to be the complete path.
Hope this helps.
Dean -
IMP-00017: following statement failed with ORACLE error 922
Hi all,
I'm trying to import a partitioned table. I'm using the imp utility with ignore=y,
but I got the error:
IMP-00017: following statement failed with ORACLE error 922:
"CREATE TABLE "TAB_EX" ("ID_EX" CHAR(12), "C2" NUM"
"BER(3, 0), "C3" DATE, "C5" DATE, "C4" NUMBER("
"8, 2), "C6" NUMBER(5, 0), "C7" NUMBER(6, "
"0), "C8" NUMBER(6, 0)) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 25"
"5 TABLESPACE "ETMTSD01" NOLOGGING PARALLEL ( DEGREE 4 INSTANCES 1) PARTITIO"
"N BY RANGE ("DT_ABERTURA" ) SUBPARTITION BY HASH ("ID_ATM" ) SUBPARTITION"
"S 4 SUBPARTITION TEMPLATE( SUBPARTITION "AB_SUBPART_1" VALUES () TABLESPAC"
"E "ETMTSD03", SUBPARTITION "AB_SUBPART_2" VALUES () TABLESPACE "ETMTSD03","
" SUBPARTITION "AB_SUBPART_3" VALUES () TABLESPACE "ETMTSD03", SUBPARTITION"
" "AB_SUBPART_4" VALUES () TABLESPACE "ETMTSD03" ) (PARTITION "AB_PART_BEFO"
"RE" VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:"
"SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 2"
"55 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_1"
"" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_2" TABLE"
"SPACE "ETMTSD03", SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_3" TABLESPACE "E"
"TMTSD03", SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_4" TABLESPACE "ETMTSD03""
" ), PARTITION "AB_PART_2008_01" VALUES LESS THAN (TO_DATE(' 2008-02-01 00:0"
"0:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTU"
"SED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "
""AB_PART_2008_01_AB_SUBPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PAR"
"T_2008_01_AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_"
"01_AB_SUBPART_3" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_01_AB_S"
"UBPART_4" TABLESPACE "ETMTSD03" ), PARTITION "AB_PART_2008_02" VALUES LESS"
" THAN (TO_DATE(' 2008-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALEN"
"DAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 TABLESPACE ""
"ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2008_02_AB_SUBPART_1" TABLESPACE "So, the rows cannot be imported because this error.
Why am I getting this error with ignore=y?
thanks!imp userdba fromuser=etmown touser=etmown file=etmown.dmp log=etmown_imp10g.log statistics=none grants=no ignore=Ythe log:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by ETMOWN, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing ETMOWN's objects into ETMOWN
IMP-00017: following statement failed with ORACLE error 922:
"CREATE TABLE "TAB_EX" ("c1" CHAR(12), "c2" NU"
"MBER(3, 0), "C3" DATE, "C4" DATE, "C5" NUMBER"
"(8, 2), "C6" NUMBER(5, 0), "C7" NUMBER(6,"
" 0), "C8" NUMBER(6, 0)) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 2"
"55 TABLESPACE "ETMTSD01" NOLOGGING PARALLEL ( DEGREE 4 INSTANCES 1) PARTITI"
"ON BY RANGE ("C3" ) SUBPARTITION BY HASH ("C1" ) SUBPARTITIO"
"NS 4 SUBPARTITION TEMPLATE( SUBPARTITION "AB_SUBPART_1" VALUES () TABLESPA"
"CE "ETMTSD03", SUBPARTITION "AB_SUBPART_2" VALUES () TABLESPACE "ETMTSD03""
", SUBPARTITION "AB_SUBPART_3" VALUES () TABLESPACE "ETMTSD03", SUBPARTITIO"
"N "AB_SUBPART_4" VALUES () TABLESPACE "ETMTSD03" ) (PARTITION "AB_PART_BEF"
"ORE" VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI"
":SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS "
"255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_"
"1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_2" TABL"
"ESPACE "ETMTSD03", SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_3" TABLESPACE ""
"ETMTSD03", SUBPARTITION "AB_PART_BEFORE_AB_SUBPART_4" TABLESPACE "ETMTSD03"
"" ), PARTITION "AB_PART_2008_01" VALUES LESS THAN (TO_DATE(' 2008-02-01 00:"
"00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCT"
"USED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION"
" "AB_PART_2008_01_AB_SUBPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PA"
"RT_2008_01_AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008"
"_01_AB_SUBPART_3" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_01_AB_"
"SUBPART_4" TABLESPACE "ETMTSD03" ), PARTITION "AB_PART_2008_02" VALUES LES"
"S THAN (TO_DATE(' 2008-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALE"
"NDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "
""ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2008_02_AB_SUBPART_1" TABLESPACE"
" "ETMTSD03", SUBPARTITION "AB_PART_2008_02_AB_SUBPART_2" TABLESPACE "ETMTS"
"D03", SUBPARTITION "AB_PART_2008_02_AB_SUBPART_3" TABLESPACE "ETMTSD03", S"
"UBPARTITION "AB_PART_2008_02_AB_SUBPART_4" TABLESPACE "ETMTSD03" ), PARTIT"
"ION "AB_PART_2008_03" VALUES LESS THAN (TO_DATE(' 2008-04-01 00:00:00', 'SY"
"YYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INI"
"TRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2"
"008_03_AB_SUBPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_03_"
"AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_03_AB_SUBP"
"ART_3" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_03_AB_SUBPART_4" "
" TABLESPACE "ETMTSD03" ), PARTITION "AB_PART_2008_04" VALUES LESS THAN (TO_"
"DATE(' 2008-05-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGOR"
"IAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" "
"LOGGING (SUBPARTITION "AB_PART_2008_04_AB_SUBPART_1" TABLESPACE "ETMTSD03""
", SUBPARTITION "AB_PART_2008_04_AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPA"
"RTITION "AB_PART_2008_04_AB_SUBPART_3" TABLESPACE "ETMTSD03", SUBPARTITION"
" "AB_PART_2008_04_AB_SUBPART_4" TABLESPACE "ETMTSD03" ), PARTITION "AB_PAR"
"T_2008_05" VALUES LESS THAN (TO_DATE(' 2008-06-01 00:00:00', 'SYYYY-MM-DD H"
"H24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAX"
"TRANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2008_05_AB_S"
"UBPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_05_AB_SUBPART_"
"2" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_05_AB_SUBPART_3" TAB"
"LESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_05_AB_SUBPART_4" TABLESPACE"
" "ETMTSD03" ), PARTITION "AB_PART_2008_06" VALUES LESS THAN (TO_DATE(' 2008"
"-07-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCT"
"FREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" LOGGING (SU"
"BPARTITION "AB_PART_2008_06_AB_SUBPART_1" TABLESPACE "ETMTSD03", SUBPARTIT"
"ION "AB_PART_2008_06_AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPARTITION "AB"
"_PART_2008_06_AB_SUBPART_3" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2"
"008_06_AB_SUBPART_4" TABLESPACE "ETMTSD03" ), PARTITION "AB_PART_2008_07" "
"VALUES LESS THAN (TO_DATE(' 2008-08-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS',"
" 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 T"
"ABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2008_07_AB_SUBPART_1" "
"TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_07_AB_SUBPART_2" TABLESP"
"ACE "ETMTSD03", SUBPARTITION "AB_PART_2008_07_AB_SUBPART_3" TABLESPACE "ET"
"MTSD03", SUBPARTITION "AB_PART_2008_07_AB_SUBPART_4" TABLESPACE "ETMTSD03""
" ), PARTITION "AB_PART_2008_08" VALUES LESS THAN (TO_DATE(' 2008-09-01 00:0"
"0:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTU"
"SED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "
""AB_PART_2008_08_AB_SUBPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PAR"
"T_2008_08_AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_"
"08_AB_SUBPART_3" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_08_AB_S"
"UBPART_4" TABLESPACE "ETMTSD03" ), PARTITION "AB_PART_2008_09" VALUES LESS"
" THAN (TO_DATE(' 2008-10-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALEN"
"DAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 TABLESPACE ""
"ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2008_09_AB_SUBPART_1" TABLESPACE "
""ETMTSD03", SUBPARTITION "AB_PART_2008_09_AB_SUBPART_2" TABLESPACE "ETMTSD"
"03", SUBPARTITION "AB_PART_2008_09_AB_SUBPART_3" TABLESPACE "ETMTSD03", SU"
"BPARTITION "AB_PART_2008_09_AB_SUBPART_4" TABLESPACE "ETMTSD03" ), PARTITI"
"ON "AB_PART_2008_10" VALUES LESS THAN (TO_DATE(' 2008-11-01 00:00:00', 'SYY"
"YY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INIT"
"RANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_20"
"08_10_AB_SUBPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_10_A"
"B_SUBPART_2" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_10_AB_SUBPA"
"RT_3" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_10_AB_SUBPART_4" "
"TABLESPACE "ETMTSD03" ), PARTITION "AB_PART_2008_11" VALUES LESS THAN (TO_D"
"ATE(' 2008-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORI"
"AN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXTRANS 255 TABLESPACE "ETMTSD01" L"
"OGGING (SUBPARTITION "AB_PART_2008_11_AB_SUBPART_1" TABLESPACE "ETMTSD03","
" SUBPARTITION "AB_PART_2008_11_AB_SUBPART_2" TABLESPACE "ETMTSD03", SUBPAR"
"TITION "AB_PART_2008_11_AB_SUBPART_3" TABLESPACE "ETMTSD03", SUBPARTITION "
""AB_PART_2008_11_AB_SUBPART_4" TABLESPACE "ETMTSD03" ), PARTITION "AB_PART"
"_2008_12" VALUES LESS THAN (TO_DATE(' 2009-01-01 00:00:00', 'SYYYY-MM-DD HH"
"24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) PCTFREE 2 PCTUSED 98 INITRANS 1 MAXT"
"RANS 255 TABLESPACE "ETMTSD01" LOGGING (SUBPARTITION "AB_PART_2008_12_AB_SU"
"BPART_1" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_12_AB_SUBPART_2"
"" TABLESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_12_AB_SUBPART_3" TABL"
"ESPACE "ETMTSD03", SUBPARTITION "AB_PART_2008_12_AB_SUBPART_4" TABLESPACE "
""ETMTSD03" ) )"
IMP-00003: ORACLE error 922 encountered
ORA-00922: missing or invalid option
Import terminated successfully with warnings.thank u very much! :-)
Edited by: [email protected] on Sep 12, 2008 3:11 PM -
"DDL statement failed" in Database load faze
Hello,
I have an problem when installing DB2 on Solaris platform.
During the installation, in Database load Faze, i get the error:
MSC-01015 Process finished with error(s), check log file /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/DB6/NUC/DB/SAPVIEW.log
I check the log & it has a whole bunch on tables that are created & at the end of it i get this message:
DB) ERROR: DDL statement failed
(CREATE VIEW "D010TINF" ( "PROG", "R3STATE", "LANGUAGE", "UNAM", "UDAT", "UTIME", "DATALG" ) AS SELECT T0001."PROGNAME"
, T0001."R3STATE", T0001."LANGUAGE", T0001."UNAM", T0001."UDAT", T0001."UTIME", T0001."DATALG" FROM "REPOTEXT" T0001)
DbSlExecute: rc = 103
(SQL error -204)
error message returned by DbSl:
SQL0204N "SAPS47.REPOTEXT"; is an undefined name. SQLSTATE=42704
(DB) INFO: disconnected from DB
/sapmnt/S47/exe/R3load: job finished with 1 error(s)
/sapmnt/S47/exe/R3load: END OF LOG: 20080810125355
/sapmnt/S47/exe/R3load: START OF LOG: 20080810130455
/sapmnt/S47/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/sapmnt/S47/exe/R3load: version R6.40/V1.4
/sapmnt/S47/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/DB6/NUC/DB/SAPVIEW.cmd -l /tmp/sapin
st_instdir/R3E47X2/SYSTEM/ABAP/DB6/NUC/DB/SAPVIEW.log -c 300 -merge_bck -stop_on_error
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(DROP VIEW "D010TINF")
DbSlExecute: rc = 103
(SQL error -204)
error message returned by DbSl:
SQL0204N "SAPS47.D010TINF"; is an undefined name. SQLSTATE=42704
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "D010TINF" ( "PROG", "R3STATE", "LANGUAGE", "UNAM", "UDAT", "UTIME", "DATALG" ) AS SELECT T0001."PROGNAME"
, T0001."R3STATE", T0001."LANGUAGE", T0001."UNAM", T0001."UDAT", T0001."UTIME", T0001."DATALG" FROM "REPOTEXT" T0001)
DbSlExecute: rc = 103
(SQL error -204)
error message returned by DbSl:
SQL0204N "SAPS47.REPOTEXT"; is an undefined name. SQLSTATE=42704
(DB) INFO: disconnected from DB
/sapmnt/S47/exe/R3load: job finished with 1 error(s)
/sapmnt/S47/exe/R3load: END OF LOG: 20080810130457
/sapmnt/S47/exe/R3load: START OF LOG: 20080810140953
/sapmnt/S47/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/sapmnt/S47/exe/R3load: version R6.40/V1.4
/sapmnt/S47/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/DB6/NUC/DB/SAPVIEW.cmd -l /tmp/sapin
st_instdir/R3E47X2/SYSTEM/ABAP/DB6/NUC/DB/SAPVIEW.log -c 300 -merge_bck -stop_on_error
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(DROP VIEW "D010TINF")
DbSlExecute: rc = 103
(SQL error -204)
error message returned by DbSl:
SQL0204N "SAPS47.D010TINF"; is an undefined name. SQLSTATE=42704
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "D010TINF" ( "PROG", "R3STATE", "LANGUAGE", "UNAM", "UDAT", "UTIME", "DATALG" ) AS SELECT T0001."PROGNAME"
, T0001."R3STATE", T0001."LANGUAGE", T0001."UNAM", T0001."UDAT", T0001."UTIME", T0001."DATALG" FROM "REPOTEXT" T0001)
DbSlExecute: rc = 103
(SQL error -204)
error message returned by DbSl:
SQL0204N "SAPS47.REPOTEXT"; is an undefined name. SQLSTATE=42704
(DB) INFO: disconnected from DB
/sapmnt/S47/exe/R3load: job finished with 1 error(s)
/sapmnt/S47/exe/R3load: END OF LOG: 20080810140954
Please lend me some of your wisdom
Regards,
Yoav ZilbermanHi Yoav,
your import failed already before the SAPVIEW package was processed. You should check the other packages too for errors or for packages which are not imported. But the errors show that at lease the tables REPOTEXT and D010TINF are missing. I'm not sure, but I think they are in SAPDDIC package. You should run the package again before running SAPVIEW. For a functioning system you need both, tables and views.
Regards
Ralph -
Hello Experts ,
We are in process of migration and after 90% of migration we are getting the following error as mentioned in MIGRATE_DT_XXXXX_IMP.log.:
ERROR exec_ddl_stmt: (DB) ERROR: DDL statement failed
( ALTER TABLE "EDID4" ADD PRIMARY KEY( "MANDT" , "DOCNUM" , "COUNTER" , "SEGNUM" ))
DbSlExecute: rc = 99
(SQL error -10108)
error message returned by DbSl:
ERROR exec_ddl_stmt: (DB) ERROR: DDL statement failed
( ALTER TABLE "EDID4" enable persistent merge )
DbSlExecute: rc = 99
(SQL error 131)
error message returned by DbSl:
transaction rolled back by lock wait timeout: Lock timeout occurs while waiting TABLE_LOCK of mode EXCLUSIVE(TRANSACTION_ID=14, UPDATE_TRANSACTION_ID=1442668)
(DB) INFO: disconnected from DB
I ran r3tans -d too to check the connection but it shows "Disconnected from DB".
Can someone please let me know what went wrong.
Environment Details :
SOurce : ECC 6 Ehp5 NW702 Oracle10
Target : ECC 6 Ehp7 NW740 HANA 1.0 Rev85
Tool : SUM 1.0 SP12 PL04
Phase Name :
MAIN_SWITCH/SUBMOD_MIG_SWITCH/SUBMOD_MIG_DOWNTIME_RUN/EU_CLONE_MIG_DT_RUN
Thanks
DevHi, Check the Blog - DMO: optimizing system downtime ...
we already had a discussion about in another request.
Best Regards Roland -
ORA-06540,following statement failed with ORACLE error 6540:
I was working during the last days on doing a full export/import for the database 9i I used the following script for the export .
exp system/**** full=y file=/export/export.dmp log=/export/export.log consistent=y statistics=estimate buffer=200000
And everything went fine, after that I dropped all the objects owners belonging to the tablepaces as i am doing that to solve fragmentation problems
The issue is during the import and after 50% of the tables were exported successfully I started to receive the following error
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C2020E'; SREC.MAXVA"
"L := 'C26338'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STA"
"TS.NUMARRAY(113,9855); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC :="
" 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"GL_ACCOUNT_ID"', NULL"
" ,NULL,NULL,1432,.000698324022346369,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017: following statement failed with ORACLE error 6540:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C2020B'; SREC.MAXVA"
"L := 'C2031F'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STA"
"TS.NUMARRAY(110,230); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := "
"2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"COMMON_COA_ID"', NULL "
",NULL,NULL,14,.0714285714285714,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017: following statement failed with ORACLE error 6540:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C202'; SREC.MAXVAL "
":= 'C20233'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS"
".NUMARRAY(100,150); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2;"
" DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"CONSOLIDATION_CD"', NULL"
" ,NULL,NULL,2,.5,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
the used script for import is
imp system/****** full=y rows=y file=/export/export.dmp log=/export/ofsaimport2.log buffer=20000000
Please note that all the tables and indexes are imported successfully even after the error started to show.
Is it something serious, should I do the import again with statistics=none or I am just fine now and it something that is just related for the statistics.Is really "fragmentation" an issue to justify this table movement? Why do you want to "defragment" your schema? Is it because of performance issues? If this is the case you are wasting your time, if you tried to rebuild the indexes by this procedure, it is also a waste of time. If you are concerned about fragmentation because of "holes" and "islands" of unused space within segments and unused space below the HWM, that is something different, in my personal jargon, I'd rather use the term space reorganization.
If the data import was successful, then take a look at the dba_objects and verify if the program unit is still there and check its status.
You may also want to take a look at this note from AskTom that explains what this error means --> http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:571023051648
~ Madrid
http://hrivera99.blogspot.com -
IMP-00017: following statement failed with ORACLE error 25153
Sirs,
Any one can guide me on below errors getting while importing the data
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
. importing SWTHIST's objects into SWTHIST
. . importing partition "AUTHHIST_2006":"AUTH_09_06" 2857788 rows imported
IMP-00017: following statement failed with ORACLE error 25153:
"CREATE INDEX "AUTH2006_1" ON "AUTHHIST_2006" ("BR_ID" , "CARD_NO" , "SYSTEM"
"_REQ_DTTIME" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FR"
"EELISTS 1 FREELIST GROUPS 1) TABLESPACE "SWTIDX" LOGGING"
IMP-00003: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
IMP-00057: Warning: Dump file may not contain data of all partitions of this table
Import terminated successfully with warnings.Hi,
I have seen this error when you have a temporary tablespace without any datafile associated with it. I don't know how that happens, but that is what I have seen.
ORA-25153: Temporary Tablespace is Empty
Try altering the temp tablespace and add a tempfile.
Dean -
Urgent:IMP-00017: following statement failed with ORACLE error 3113
OS:HP_UX 11i
Oracle 9.2.0.3.0
when import tablespace metadata,
comand is "imp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y DATAFILES='/oradata/data2/
B.dbf' TABLESPACES=A FILE=A.dmp IGNORE=Y LOG=./log/import.log"
the error occurs as followed:
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3626"
"7,35051,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully
export is in same enviorment, the successful informantion below:
exp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y TABLESPACES=A FILE=A.dmp
LOG=./log/export.log
log file:
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace A ...
. exporting cluster definitions
. exporting table definitions
. . exporting table A
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.I do it,but the same error message.
export message:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace A ...
. exporting cluster definitions
. exporting table definitions
. . exporting table A
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.
Import Message:
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3627"
"7,36451,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully
Maybe you are looking for
-
Problem with Email Notification in Oracle 10g
Hello Guys, I have the following simple stored procedure for notifying emails.The procedure is getting executed successfully, but no email is being sent to mailbox, any help is appreciable.!! I'm very new to write this pl/sql stuff..!!! This is a ver
-
Hi Gurus, I am unable to create new report, when I want to insert a dataprovider in Report designer I have the following errors. An error occurred in the BI components on the SAP J2EE Engine. What i have to do now please suggest me Thanks in advance
-
Execute code when task flow is finished
I have two task flows: TFBrowseRecs and TFUploadFile. I initiate calling of TFUploadFile from view (by af:button) inside TFBrowseRecs. TFUploadFile has return-value-definition which is is used to return value which is created in TFUploadFile. TFUploa
-
My iMac has not synced to icloud since november, how do i force a sync?
My iMac has not synced to icloud since november, how do i force a sync?
-
Could not connect to whatsapp server plz try again later
Cant connect yo whatsapp server plz help cant connect