WLST crashed on getting non-existing attribute in runtime()

After downloading the latest WLST package (April 14th, 2005) from the dev2dev site, I'm experiencing WLST crashs after attempting to get an attribute on a non-existing object instead of seeing a normal syntax error message.
Before updating my jython.jar and wlst.jar for dev2dev:
wls:/dizzyworld/runtime/ServerRuntime/dizzy1/ApplicationRuntimes/dizzy1_mbeanlis
ter/ComponentRuntimes/dizzy1_dizzy1_mbeanlister_mbeanlister> get('SessionsOpenTo
talCount')
Traceback (innermost last):
File "<input>", line 1, in ?
File "<iostream>", line 191, in get
WLSTException: 'Error occured while performing get : AttributeNotFound Exception
while doing a getAttribute for attribute SessionsOpenTotalCount. Use dumpStack(
) to view the error stack trace'
After:
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8072644
Function=[Unknown.]
Library=D:\bea\jdk142_05\jre\bin\client\jvm.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
     at java.lang.Throwable.getStackTraceDepth(Native Method)
     at java.lang.Throwable.getOurStackTrace(Throwable.java:588)
     - locked <0x10462cf0> (a java.lang.Throwable)
     at java.lang.Throwable.getStackTrace(Throwable.java:582)
     at weblogic.utils.StackTraceUtils.getThrowableWithCause(StackTraceUtils.java:180)
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:137)
     at weblogic.management.internal.RemoteMBeanServerImpl_814_WLStub.getAttribute(Unknown Source)
     at weblogic.management.scripting.BrowseHandler.handleRuntime(BrowseHandler.java:1596)
     at weblogic.management.scripting.BrowseHandler.regularPush(BrowseHandler.java:981)
     at weblogic.management.scripting.BrowseHandler.splitPush(BrowseHandler.java:139)
     at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1693)
     at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1683)
     at weblogic.management.scripting.BrowseHandler.resetCD(BrowseHandler.java:1664)
     at weblogic.management.scripting.BrowseHandler.splitPush(BrowseHandler.java:141)
     at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1693)
     at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1683)
     at weblogic.management.scripting.BrowseHandler.resetCD(BrowseHandler.java:1664)
     at weblogic.management.scripting.BrowseHandler.splitPush(BrowseHandler.java:141)
     at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1693)
     at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1683)
     at weblogic.management.scripting.EditHandler.get(EditHandler.java:66)
     at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
     at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
     at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
     at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
Dynamic libraries:
0x00400000 - 0x0040B000      D:\bea\jdk142_05\bin\java.exe
0x77F80000 - 0x77FFD000      C:\WINNT\system32\ntdll.dll
0x7C2D0000 - 0x7C332000      C:\WINNT\system32\ADVAPI32.dll
0x7C570000 - 0x7C623000      C:\WINNT\system32\KERNEL32.DLL
0x77D30000 - 0x77DA1000      C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78045000      C:\WINNT\system32\MSVCRT.dll
0x08000000 - 0x08139000      D:\bea\jdk142_05\jre\bin\client\jvm.dll
0x77E10000 - 0x77E6F000      C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7B000      C:\WINNT\system32\GDI32.dll
0x77570000 - 0x775A0000      C:\WINNT\system32\WINMM.dll
0x6BD00000 - 0x6BD0D000      C:\WINNT\system32\SYNCOR11.DLL
0x10000000 - 0x10007000      D:\bea\jdk142_05\jre\bin\hpi.dll
0x007C0000 - 0x007CE000      D:\bea\jdk142_05\jre\bin\verify.dll
0x007D0000 - 0x007E9000      D:\bea\jdk142_05\jre\bin\java.dll
0x007F0000 - 0x007FD000      D:\bea\jdk142_05\jre\bin\zip.dll
0x18BE0000 - 0x18BEF000      D:\bea\jdk142_05\jre\bin\net.dll
0x75030000 - 0x75044000      C:\WINNT\system32\WS2_32.dll
0x75020000 - 0x75028000      C:\WINNT\system32\WS2HELP.DLL
0x782C0000 - 0x782CC000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000      C:\WINNT\system32\DNSAPI.DLL
0x75050000 - 0x75058000      C:\WINNT\system32\WSOCK32.DLL
0x77340000 - 0x77353000      C:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000      C:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000      C:\WINNT\system32\MPRAPI.DLL
0x75150000 - 0x7515F000      C:\WINNT\system32\SAMLIB.DLL
0x75170000 - 0x751BF000      C:\WINNT\system32\NETAPI32.DLL
0x7C340000 - 0x7C34F000      C:\WINNT\system32\Secur32.dll
0x77BF0000 - 0x77C01000      C:\WINNT\system32\NTDSAPI.dll
0x77950000 - 0x7797A000      C:\WINNT\system32\WLDAP32.DLL
0x751C0000 - 0x751C6000      C:\WINNT\system32\NETRAP.dll
0x77A50000 - 0x77B3F000      C:\WINNT\system32\OLE32.DLL
0x779B0000 - 0x77A4B000      C:\WINNT\system32\OLEAUT32.DLL
0x773B0000 - 0x773DF000      C:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773A3000      C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783E000      C:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790E000      C:\WINNT\system32\SETUPAPI.DLL
0x7C0F0000 - 0x7C151000      C:\WINNT\system32\USERENV.DLL
0x774E0000 - 0x77513000      C:\WINNT\system32\RASAPI32.DLL
0x774C0000 - 0x774D1000      C:\WINNT\system32\RASMAN.DLL
0x77530000 - 0x77552000      C:\WINNT\system32\TAPI32.DLL
0x71710000 - 0x71794000      C:\WINNT\system32\COMCTL32.DLL
0x70A70000 - 0x70AD6000      C:\WINNT\system32\SHLWAPI.DLL
0x77360000 - 0x77379000      C:\WINNT\system32\DHCPCSVC.DLL
0x777E0000 - 0x777E8000      C:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000      C:\WINNT\system32\rasadhlp.dll
0x19070000 - 0x19075000      D:\bea\weblogic81\server\bin\stackdump.dll
0x74FD0000 - 0x74FEE000      C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000      C:\WINNT\System32\wshtcpip.dll
0x77920000 - 0x77943000      C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000      C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000      C:\WINNT\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 4544K, used 4428K [0x10010000, 0x104f0000, 0x104f0000)
eden space 4096K, 100% used [0x10010000, 0x10410000, 0x10410000)
from space 448K, 74% used [0x10410000, 0x10463190, 0x10480000)
to space 448K, 0% used [0x10480000, 0x10480000, 0x104f0000)
tenured generation total 60544K, used 60543K [0x104f0000, 0x14010000, 0x14010000)
the space 60544K, 99% used [0x104f0000, 0x1400ffc0, 0x14010000, 0x14010000)
compacting perm gen total 8960K, used 8801K [0x14010000, 0x148d0000, 0x18010000)
the space 8960K, 98% used [0x14010000, 0x148a8630, 0x148a8800, 0x148d0000)
Local Time = Tue Aug 09 11:22:51 2005
Elapsed Time = 133
# HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
Regards,
Zachary Slaybaugh
Sr. Application Administrator
Time Warner Cable, Inc.

This has been fixed in the latest version of wlst. You can get it from
https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/id/S13
Thanks,
-satya

Similar Messages

LV 8.20 crashes on opening non-existent window

With LV 8.20 and Mac OS X 10.4.8
Open LV, and by default it opens a blank window.
(preferences
IsFirstLaunch: False
showNoNavDialog: True
skipNavigatorDialog: True
Close the blank window titled "Untitled 1 Front Panel" using the "close button"
Note that in the Window menu, "Untitled 1 Front Panel" and "Untitled 1 Block Diagram" both still exist.
Select "Untitled 1 Front Panel" in the window menu.
LV will crash as it tries to display a non-existent window
Crash at VirtualInstrument.cpp 2345
Reported to NI SRQ 7137659

Just to update, CAR #43RAJ3C5 has been issued for this.

UpdateXML for non-existing attribute

Hello
bellow are data for a sreange looking (for me) behaviour of updateXML.
Usually (i mean other languages) setting an xml node attribute causes attribute creation if it does not exist.
Here obviously that is not the case.
Q: Why and is it possible to create attribute during node update?
thank you
i
h3. general info
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
PL/SQL Release 9.2.0.7.0 - Production
CORE 9.2.0.7.0 Production
TNS for 32-bit Windows: Version 9.2.0.7.0 - Production
NLSRTL Version 9.2.0.7.0 - Production
SQL> select dbms_metadata.get_DDL('TABLE', 'X') FROM dual;
DBMS_METADATA.GET_DDL('TABLE',
CREATE TABLE "PCB_1209"."X"
( "NODE" "SYS"."XMLTYPE"
) PCTFREE 10
SQL>
SQL> insert into x values(Xmltype('<TOP><DATAID>111080</DATAID></TOP>'));
SQL> insert into x values(Xmltype('<TOP><DATAID lbl="test">111000</DATAID></TOP>'));
SQL> commit;
Commit complete
h3. correct part
SQL>
SQL> select extract(node, '/').getStringVal() as node
2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111000;
NODE
<TOP>
<DATAID lbl="test">111000</DATAID>
</TOP>
SQL>
SQL> update x set node = updateXML(node,'//DATAID/@lbl','test_new')
2 where extract(node, '//DATAID/text()').getNumberVal() = 111000;
1 row updated
SQL> commit;
Commit complete
SQL>
SQL> select extract(node, '/').getStringVal() as node
2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111000;
NODE
<TOP>
<DATAID lbl="test_new">111000</DATAID>
</TOP>
h3. wrong part
SQL>
SQL> select extract(node, '/').getStringVal() as node
2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111080;
NODE
<TOP>
<DATAID>111080</DATAID>
</TOP>
SQL>
SQL> update x set node = updateXML(node,'//DATAID/@lbl','test_new')
2 where extract(node, '//DATAID/text()').getNumberVal() = 111080;
1 row updated
SQL> commit;
Commit complete
SQL>
SQL> select extract(node, '/').getStringVal() as node
2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111080;
NODE
<TOP>
<DATAID>111080</DATAID>
</TOP>

Unusual, probably. Documented, yes. This is from 10.2 but would still be applicable to you and your situation.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/chapter1.htm#FEATURENO05479
The current UpdateXML() function can only manipulate the content of existing nodes within an XML document. It cannot be used to add or remove nodes from a document. The only way to add or remove nodes from a document is to use the methods provided by the DOM API.So you are going to have to insert/create that attribute in the XML before you can update it. I was going to provide a link to some examples but I can't seem to recall where I saw them in the forums. I thought it was on {forum:id=75} but I can't find it now.

XPath - how to get non exist nodes? please help!

Hi!
There is a so xml structure:
main_node
node_a
node_a_1
node_a_2
node_a_3
the 'node_a' node repeats 3times in the XML. The 'node_a_2' node is not in the first recurrence of 'node_a' node.
When I want to get the 'node_a_2' nodes by XPath, I get a List, which consists of 2 element.
But I want to get a so list, which consists of 3 elements, the first is null and the others are the elements of 'node_a_2' node!
This is the code:
List getElementByXPath(String Path) throws org.jaxen.JaxenException {
org.jaxen.XPath P = new org.jaxen.jdom.JDOMXPath("/"+Path.replace(".","/"));
List Back = P.selectNodes(ArrivedXML.getRootElement());
return Back;
Please help, how can i do it!
Thank You very much!
rflair

the structure again...:
main_node
....node_a
........node_a_1
........node_a_2
........node_a_3

Non Existent Directories in EBS 12.1.1- IBM AIX 7.1

Hi All ,
We are facing issues while installing Oracle EBS r12.1.1 in IBM AIX 7.1 we have 2 servers one for apps and one for DB.
We are getting non existent directories like /data1/r12 and certain links are poiting to this wrong directory.
need some expert help in this.
-Raj

raghuraj wrote:
HI EBSDBA,
Thanks .There was no /etc/oraInst.loc.
Saw you also faced similar issue long back ,can you pls let me know is that problem with media or something else..
-RajFirst please create oraInst.loc in /etc as per "verify oraInst.loc" in
Oracle Applications Release Notes, Release 12.1.1 [ID 798258.1]
Also, please see
How to fix Incorrect Soft Links And Oracle_home In 10.1.2 & 10.1.3 Homes [ID 849821.1].
You must also do md5sum checksum for the installation media you have.
The problem could be with media and also with oraInst.loc. Please make sure you have all the pre-requisites installed as per
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for IBM AIX on Power Systems (64-bit) [ID 761569.1]
Thanks

How to find a classes attributes at runtime?

Hi,
I need to write a program that inspects a class and finds out what attributes it has and then converts them to an XML string. Any idea how to get the classes attributes at runtime? I want this to work with 3rd party API's hence the reason I don't just either code a toXML function in each class or have a method to return the attribute names.
Thanks
Andre

Hi,
I need to write a program that inspects a class and
finds out what attributes it has and then converts
them to an XML string. Any idea how to get the classes
attributes at runtime? I want this to work with 3rd
party API's hence the reason I don't just either code
a toXML function in each class or have a method to
return the attribute names.
Thanks
AndreYou might want to take a look at Java's reflection mechanism:
http://java.sun.com/docs/books/tutorial/reflect/index.html

I keep getting calls from non existing area codes and phone numbers. They are never the same number twice. How do I stop this?

About a week ago I started getting phone calls on my cell phone from numbers that do not exist, including the area codes. I can not report these to the Do Not Call list because the area code is non existent. I'm getting these calls all the time now and never from the same number twice so there's no point in blocking them. If I answer I may or may not get a person who has an accent from India so heavy that I can't understand what they are saying. This is getting to the point where I just want to cry I'm so frustrated. Anyone else having this issue or does anyone know how to stop it?
Thank you

I'm sorry that you are having all these troubles. I have sent you a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

HT5616 I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

If you didn't create an iCloud account on an iOS device or Mac, you don't have one. You can't create an account on a PC. If you were charged for an iCloud storage upgrade without having an account, contact the Apple online store at the bottom of this page for a refund.

I am getting weary of my iPhone 4s. the battery life is non-existent, second, i had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they wi-fi or cellular. what could be the problem.

I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

[SOLVED] Grub crash: seeking non-existent device

A couple days ago, I did a successful fresh install on another computer. Today, I took my hdd from my old system and added it as a slave on IDE1. I didn't move or make any changes to /dev/sda (arch hdd) and BIOS successfully recognized the second hdd.
Then when I boot, Grub complains:
error: no such device: [some UUID]
grub rescue>
At this point, I'm assuming it must by the UUID of my first hdd and for some reason, it can't find it anymore.
I should mention here that when I partitioned /dev/sda during installation, I used GPT, not MFT. Since this computer is an older Dell that I'm resurrecting with Arch, it has an older BIOS, which means that gdisk had to create a very small bios-boot partition to make it somehow compatible with the BIOS. I mention it because I'm not sure if that plays into any of this.
Next, I boot the arch-install iso "ARCH_201310" off my keydrive, then blkid to see the UUIDs of both hard drives...nothing matches the UUID that grub complains about. Then I go into gdisk and check all the UUIDs for disks, partitions...find nothing that matches. I check my grub.cfg and it's not in there either. Just out of curiosity, I regenerated my grub config and reinstalled grub (after arch-chroot, of course) and then rebooted. Got the exact same message! I'm totally at a loss now. I have no idea what's going on. I'm hoping the forum can help...so I don't have to go through the hassle of doing a fresh install all over again. If it makes any difference...here's some output from the grub shell...I tried ls everything listed, but it couldn't find any filesystems.
grub rescue> ls
grub rescue> (hd0) (hd0,msdos4) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) (hd1) (hd2) (hd2,msdos2) (fd0)
Not even sure why it listed (fd0) since I removed the floppy drive and turned it off in BIOS
Last edited by bpont (2013-10-26 07:31:23)

So just for the sake of completeness, in case anyone in the future has a similar issue and stumbles across this thread:
The reason grub was giving an error about a non-existent device with a UUID which didn't belong to any of my current devices or partitions was because it had belonged to a previous installation on the same drive...one whose /boot was on the primary hdd of my previous computer. I think I may have also mistakenly installed grub on the second hdd at that time, instead of on the primary one...so long story short, there were some artefacts on the MBR of the second hdd which grub was finding and complaining about.
There were two possible solutions to resolving the boot failure: chrooting to my arch partition and re-installing grub, first on the second hdd, and then on the primary hdd; or the second option of removing the 55AA signature on the second hdd with a hex editor. After choosing the simpler option of reinstalling grub on both hard drives, I then switched my second hdd back on in BIOS and rebooted normally.
Last edited by bpont (2013-10-26 06:44:24)

Help with seting up a Data Sorce can't be created with non-existent Pool

I am wanting to use an Oracle 9i with WebLogic 7
I have the following in my config.xml:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
Name="Thin.Pool" Password="{3DES}C3xDZIWIABA="
Properties="user=SYSTEM" TestTableName="OID"
URL="jdbc:oracle:thin:@localhost:1521:DB_SID"/>
<JDBCDataSource JNDIName="DB_DS" Name="DB_DS" PoolName="Thin.Pool"/>
The console seems happy, no error mesages but in the log I get:
####<Mar 31, 2003 6:33:45 PM MST> <Info> <HTTP> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <101047>
<[ServletContext(id=4110316,name=console,context-path=/console)]
FileServlet: Using standard I/O>
####<Mar 31, 2003 6:35:37 PM MST> <Info> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001082> <Creating Data Source named DB_DS for pool
Thin.Pool>
####<Mar 31, 2003 6:35:37 PM MST> <Error> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(DB_DS) can't be created
with non-existent Pool (connection or multi) (Thin.Pool)
     at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
     at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:260)
     at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
     at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:154)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:952)
     at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:578)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:419)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:952)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
     at $Proxy16.addDeployment(Unknown Source)
     at weblogic.management.internal.DynamicMBeanImpl.unprotectedUpdateDeployments(DynamicMBeanImpl.java:1784)
     at weblogic.management.internal.DynamicMBeanImpl.access$0(DynamicMBeanImpl.java:1737)
     at weblogic.management.internal.DynamicMBeanImpl$1.run(DynamicMBeanImpl.java:1715)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
     at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1711)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:1035)
     at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:353)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1358)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1333)
     at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanServerImpl.java:898)
     at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:324)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:193)
     at $Proxy13.setTargets(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:92)
     at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:145)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Why does it say:
can't be created with non-existent Pool
Thanks,

Add "Targets" attribute to the connection pool. You may
get an idea how it looks like by searching config.xml
for "targets". If target servers are not set, the pool won't be
deployed and can not be used to a create datasource.
Regards,
Slava Imeshev
"BBaker" <[email protected]> wrote in message
news:[email protected]...
I am wanting to use an Oracle 9i with WebLogic 7
I have the following in my config.xml:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
Name="Thin.Pool" Password="{3DES}C3xDZIWIABA="
Properties="user=SYSTEM" TestTableName="OID"
URL="jdbc:oracle:thin:@localhost:1521:DB_SID"/>
<JDBCDataSource JNDIName="DB_DS" Name="DB_DS" PoolName="Thin.Pool"/>
The console seems happy, no error mesages but in the log I get:
####<Mar 31, 2003 6:33:45 PM MST> <Info> <HTTP> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <101047>
<[ServletContext(id=4110316,name=console,context-path=/console)]
FileServlet: Using standard I/O>
####<Mar 31, 2003 6:35:37 PM MST> <Info> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001082> <Creating Data Source named DB_DS for pool
Thin.Pool>
####<Mar 31, 2003 6:35:37 PM MST> <Error> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(DB_DS) can't be created
with non-existent Pool (connection or multi) (Thin.Pool)
atweblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:
127)
atweblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:260)
atweblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:29
3)
atweblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:375)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:154)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:732)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:7
14)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:417)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
atweblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerI
mpl.java:952)
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:578)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:419)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
atweblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerI
mpl.java:952)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy16.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.unprotectedUpdateDeployments(D
ynamicMBeanImpl.java:1784)
atweblogic.management.internal.DynamicMBeanImpl.access$0(DynamicMBeanImpl.java
:1737)
atweblogic.management.internal.DynamicMBeanImpl$1.run(DynamicMBeanImpl.java:17
15)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1711)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:1035)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:353)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
8)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
3)
atweblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanS
erverImpl.java:898)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:324)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:193)
at $Proxy13.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:92)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:145)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:171)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5445)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3105)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Why does it say:
can't be created with non-existent Pool
Thanks,

PE12: asking "Where is file..." for a non-existent file

When opening a project in Adobe Premiere Elements 12, I'm getting the "Where is file..." pop up window. It's asking ...
"Where is the File 'C:\Program Files\Adobe\Premiere Pro 1.5\Presets\Textures\Business Title_7.tga'?"
Which is odd because I didn't use any such file in the project, I only have Adobe Premiere Elements 12, and this is installed on a MacBookPro. So I'm not sure why it's looking for a tga file in a Premiere Pro folder in a non-existent C:drive.
I only have two video clips in this project. I'm using the cross-fade transition between titles and clips. The title template I'm using is "RedBulbs_Title". I've duplicated it several times and I seem to get that same "Where is.." pop up, one for each time I've used the "RedBulbs_Title" template.
Am I missing something in my installation?

A.T.
I have a new project that I've created in Pe12. I get the message every time I open the file to continue editing. So, I created it, edited for a while, and save. When I open the file again, days later, I get the error.
It does seem to be related to the titles in Pe12. The error seems to occur once for every time the title template is used. I dismiss the error saying the file is Offline so that I can get to the project and continue working. Even though the file is considered "offline", the video doesn't seem to be mising any components.
I'm useing Pe12 for Mac, purchased new from Amazon.com. It was a clean install. There was no previous installation of Premiere Pro or Elements.
I have not imported any jpegs. My source files are .mp4 and the title graphics within Pe12. It's a very simple project.
The strangest part for me is seing a Windows error message on a Mac. I've never even opened the Windows install disk for Pe12, much less used it in the Mac.
Using Finder to search for the missing file returns no results as if the file doesn't exist anywhere on the Mac.
Am I correct in that the Title clips in Pe12 are not on the installation but on the internet? I seem to recall that the Title files had to download the first time I used a particular title in Pe. Could it be a problem with the downloaded files?
I'm re-installing Pe now. I'll let you know how that goes.
Re-installed over previous install hoping to avoid losing anything. Big mistake. Everything just crashes now. Uninstalling everything, preferences and all, and will do a clean install.
more to come.

Issue with sales order stock that is referencing a non-existing sales order

We have an issue with sale order stock.
Due to user error we have ended up with a negative quant of sales order stock in a bin. Further the error was due to mis-keying of sales order number. Hence this negative quant is referencing a sales order that does not exist.
We need to get rid of this quant.
I thought of cycling this quant off as a solution. And hence replicated the scenario in the test system. I was able to create a TO to cycle it off but cannot clear the differences from 999 . The error I get while trying to do this is "SD document not in database or has been archived" . This error is true since the sales order actually does not exist. So cycling it off did not work.
Can anyone suggest how we can get rid of this negative quant of sales order stock ?
Thanks

Hi,
You said that your user mistyped the SO number and it resulted in a -quant. In which transaction was it possible? If I give a non existing no. SAP doesn't allow me to book.
If I were you I would check both in WM & IM what the user had done...step-by-step...
Negative quant comes to existance in interim storage type if we book e.g. a GI. It should have started in IM...how was your user be able to do that??? If it was possible cannot you reverse the IM booking?
(...if all else fails...cannot you create a SO document with external number assignment with the same number?...)
BR
Csaba
Edited by: Csaba Szommer on Jun 24, 2008 8:31 PM

How to get the checked attribute of a checkbox item from a PL/SQL process?

Hello,
I have a simple static form with one checkbox linked to a LOV containing one single value. I use this checkbox just to enable/disable other fields via Javascript. I am interested to fetch the "checked" attribute of this checkbox (and not the value of the checkbox) from an After Submit PL/Sql page process, so that I can process only the enabled fields.
I can already imagine a workaround where we may store via Javascript the checked attribute of this checkbox in an hidden page item and then getting it from there, but I would really like to avoid it, as it would add unnecessary complexity and I would have to add more code to keep the hidden item always in synch with the checkbox status.
Is there something like the V('page_item') PL/Sql function that can get a different attribute from a page item (like the checked one from a checkbox) and not only its value?
I searched the forum for an answer to my question, but I couldn't find anything related.
Thanks a lot,
Paolo

Paolo,
HTML checkboxes are POSTed only if they are checked. So if your "checked" value is 'Y', for example, then your after-submit process can check if the item's value is 'Y' or not. Of course, you must be careful to set that item to null (or some non-checked value) in session state during page rendering so that previous values are not retained.
Scott

Usage tracking problem : not started due to non-existent Usage Tracking tab

Hello,
I need some help after following the necessary steps to setup 'Usage Tracking'.
My table S_NQ_ACCT stays empty.
The structure in the rpd files looks like
* OBI Usage Tracking
Connection Pool
Usage Tracking Writer Connection Pool
Catalog
dbo
S_NQ_ACCT
My nqsconfig has the following entries related to usage tracking
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = YES;
DIRECT_INSERT = YES;
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
When making queries on the Usage Tracking SA, I still receive the following error in the NQServer.log File
+[59049] Usage Tracking not started due to non-existent Usage Tracking table "<Database>"."<Catalog>"."<Schema>"."<Table>".+
What am I doing wrong??
Txs for your quick help on this!
Kr,
A.

Can you post your entire NQSConfig.INI file?
According to the message guide (http://download.oracle.com/docs/cd/E12103_01/books/AnyMsg/AnyMsg_Messages.html#wp1007961) the error you're getting specifies the table that OBIEE is trying to use, so the fact that yours reports literally "<Database>"."<Catalog>"."<Schema>"."<Table>" makes me think maybe the wrong config is being picked up. Also your comment that using a file instead of DB doesn't work either.

WLST crashed on getting non-existing attribute in runtime()

Similar Messages

Maybe you are looking for