WMy Geforce 3 Ti-200 Pro-T (MS-8851) Not working in D3d!!!!!

 ;( I have a G3Ti200Pro-T (MS-8851)  When i play any game in D3d it comes on until the loading screen comes up.... then it crashes and goes back to desktop.. I tried to play UT2k3, and MotoGP but the same thing happens goes back to desktop...
I can only play UT2k3 in OpenGL mode.. But i want to play in D3d......I even installed 11 diffrent drivers from 20.81 to 40.72!!! and nothing happened!!!! What is My Problem? ?(

hi
 i would bet its lack of power
 if the combinned on your psu is much under 200 watts
 get a better one
 

Similar Messages

  • Win 7 pro 64 bit does not work nice with tv tuners

    my win 7 pro 64 bit will not work with three recommened tv tuners, though not specific to 64 bit . I know one works great withmy old 32 bit xp system. all three different recommended tuners crashed my system three times amd informed me the flash player that comes in the software is not compatable with my system. also flash player stand along in my system will not work right all the time. worked so well in my old system? any thoughts on this dilemma. really do not want to return my new diamond tv wonder hd 750 card. otherwise this system blazes very appy with it, thanks.

    This forum is for Firefox support, you should try the customer support for the manufacturers of the TV tuner cards.

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • I purchased a new computer and also Adobe acrobat XI Pro.  It has not worked properly.  I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number.  What can I do?

    I purchased a new computer and also Adobe acrobat XI Pro.  It has not worked properly.  I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number.  What can I do?

    Hi,
    Have you tried the help documents below:
    Error "The serial number is not valid for this product" | Creative Suite
    Invalid serial number error
    In case of any other error message, please specify.
    Regards,
    Sheena

  • Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

    Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

    Yes.

  • Acrobat Pro (V11.0.07) not working as it should

    Acrobat Pro (V11.0.07) not working as it should (various aspects) - receive an error 2503/2502 when attempting to run a repair

    Hi ferdinando,
    Was Acrobat working fine for you before?
    Which OS are you using?
    Try repairing Acrobat from the Control panel> Programs and check.
    Are you getting the error: "Error 2503 called RunScript when not marked in progress"
    This is apparently a Windows issue (see http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-2503 -called-runscript-when-not-marked-in/76e72d98-cbef-432f-8f6f-40417d139bc1
    Regards,
    Rave

  • My final cut pro x update is not working?

    My final cut pro x update is not working for 10.0.3
    I'm very upset, somesone help me I'll update lastest version of FCPX.
    my version is now 10.0

    Then perhaps you should post your question in the FCP forums rather than the iPhone forums.

  • My MacBook Pro internal speakers are not working, what happened?

    My MacBook Pro internal speakers are not working, what happened? If I plug in earbuds or external speakers, there is sound. In sound preferences, internal speakers are not a choice. Why doesn't my internal speakers work?

    Hopefully one of these steps should solve the problem.
    1. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    Best.

  • Airdrop between Macbook Pro and iPhone 5 not working

    Hi, I'm trying to use Airdrop between my Macbook Pro 17" (early 2009) running OS Yosemite, and my iPhone 5 running IOS 8.0.2, but it is not working.
    All the specs on both of my laptop and iPhone seem to be ok, as Apple says in the System Requirements.
    I've verified that Airdrop works fine betwen my Macbook Pro and other Mac laptops, but not with my iPhone.
    I've all tried, but it's impossible, it doesn't work, and it should work.
    I attach a screenshot showing the specs of my Macbook Pro, as well as the System Requirements.
    Please,any solution?
    Thank you.

    From Mac Basics: AirDrop lets you send files from your Mac to ...
    "In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model."

  • HP Officejet Pro 8600 Duplex Printing Not Working

    I am running Windows 7. Duplex printing is not working on my Officejet Pro 8600. It has worked in the past, but I cannot get it to work now. I have reset the printer and restarted by laptop. I have not made any changes that should affect the duplex printing. Thank you. 

    Hi there beachlover.
    Hope you are doing wel and welcome to the HP forums;
    The Hardware Diagnostic tool can help you find common hardware issues and in most occasions fix them Give it a try by going to this link  www.hp.com/go/tools Let me know the results and include any errors that the utility finds
    I will try my best to help you .
    RobertoR

    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Transferred a video from phone to macbook pro but sound is not working.

    I transferred a video from my phone to my macbook pro. the transfer was successful but the sound is not working on the computer, totally mute. the video is playing on quicktime player. the computer sound is on. the video was working fine on the phone and when i transferred the video, if this makes any difference or anything, the phone's media volume was on full.
    I very much appreciate the help and feed back, thank you!

    I have this same issue and have been struggling with it for a while.  I really just need to get it into Apple Store to be fixed most likely - but avoiding the hassle and time needed to do so.
    Things I've come across:
    Something inside of the headphone jack is not right, such that it randomly thinks headphones or some other type of optical audio device are plugged in.  you will see a red light inside the jack occasionally when it happens.
    You might try doing PRAM and/or SMC reset ( http://support.apple.com/kb/HT3964 )

  • Satellite Pro U200: VGA output not working properly when AC adapter was connected

    Hi,
    I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
    thanks in advance

    As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
    The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

  • Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

    Hi Guys
    I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

    Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
    For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

  • Acrobat Pro X PDF previewing not working in Windows 7 64-bit

    Greetings, all,
    The organization I work for recently purchased a volume license for Acrobat Pro X.  We uninstalled Adobe Reader from all of our machines and installed Acrobat Pro X on them.  After the move, the PDF preview handler stopped working.  People commonly link to the URL below, but it has not worked for us.  It appears it only works for the PDF preview handler packaged with Adobe Reader, not the one packaged with Acrobat Pro.
    http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html
    Users are unable to preview PDFs in Windows Explorer and Microsoft Office Outlook 2007.  When attempting to preview in Windows Explorer, the following appears:
       This file can't be previewed.
    What can we do to get the preview handler working in Windows Explorer (Windows 7 64-bit) and Office Outlook 2007?
    Thanks in advance!

    Bill@VT wrote:
     OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
    Well, thumbnails in Explorer don't work either, but we're not concerned about it.  The preview pane is what we're worried about.  There is a button in the top-right that turns the pane on.  Previewing in Outlook does not work either.
    Sabian Zildjian wrote:
    Check the value for AppID in this registry key:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
    What do you have?
    {534A1E02-D58F-44f0-B58B-36CBED287C7C}
    DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

  • Surface Pro pen pressure is not working in Photoshop

    I just bought Microsoft Photoshop.
    But Adobe Photoshop doesn't provide pen pressure sensitivity.
    I tested Microsoft OneNote, Fresh Paint, and Autodesk Sketchbook. They are working well.
    Please provide the pen pressure function in Photoshop too.

    On the Main photoshop forum, one of the Adobe staff is stating that the issue is with Microsoft and not Adobe. I can not see the code nor do I own a surface pro therefore I can not confirm nor deny it. In other words, I am a poor lonely user with the same access as every other user. LOL.

Maybe you are looking for

  • Ubuntu (Gnome) and keyboard on a Lenovo 3000 N200 (0769-BAG)

    Hi ! I bought this one a long time ago and ran various Linux version since the beginning. I started with Fedora and was upset by the too fast upgrade rythm. So I switched to Ubuntu. I'm using 10.04 I discovered that a lot of keyboard keys are not run

  • Huperlinks in ibooksauthor glossary? Doesn't seem to be possible? Is therea work around?

    Is there a work around? I need to include links to the outside world from the glossary. help... Johan

  • To print text in sapscrpit.

    I want to print text maintained in standard tcode QM03 in sapscript . I have a y-report as driver program and want to print the text maintained for a notification number in the script. I have used "read_text". But i get only partial text. In the debu

  • Just trying to get started

    I installed jdk 1.3. After that made this: class helloworld { public static void main (string args[]) { System.out.printin("Hello world!"); In command prompt compiled with?javac HelloWorld.java?.      Got this massage? ?javac? is not recognized as an

  • Preinstall cleanup question

    Version 2.18. We are runing the Do Setup step on "9.1-Apply patch 7303029". The text in the Wizard for this step states: "Before applying 7303029, if you have applied any other patch previously in preinstall mode and do not intend to merge it with 12