Word 2013 - Work with Master Documents very slow

Hello,
we changed from Office 2003 to Office 2013.
A user who creates many documentations by using master documents informed me, that he cannot work longer by using Word 2013, because extending master documents or refreshing table of contents takes long time.
In Word 2003 it takes few seconds, in Word 2013 in takes some minutes!
How can I improve this?
BR, David
David Strutzenberger

The Master Documents "Feature" in Word has long been broken. It remains broken in Word 2013 AFAIK. Read the linked article. There are alternatives. One of the easiest ways to lose
tremendous amounts of work is to edit documents in Master Documents form. That you have used it this long without losing work is a minor miracle.
Charles Kenyon Madison, WI

Similar Messages

Rendering and working with AE is very slow.

Hey guys,
I'm running on Windows XP Pro, Intel Core 2 Quad CPU, Q6600 @ 2.40Ghz, Clockspeed; 2,40Ghz, 3GB RAM. Whenever I'm working in AE it's very slow to use in full resolution. When I lower the resolution I still have to wait for the preview screen to 'load'. This is very annoying in a work situation. Am I doing something wrong? My pc is very fast with other 'heavy'programs.

AE will auto-disable MP if it does not detect enough RAM. You can still toggle it, but AE won't use it in any case. You could only change that by flipping some switches in your BIOS (if it supports this) that will make your 4 cores appear as only 2 cores or one core even, but this has some other side effects like possibly requiring a full re-install of your entire system...
The disk cache should be located on the fastest disk in your system. Doesn't matter which one, as long as it has enough space and is permanently available. Even a network drive or external disk would work. The only requirement is to create a dedicated directory for it. you can call it "Mom" or "Popsi" - doesn't matter. Calling it "AE Cache" would be smarter, though. ;-)
As for the rest: Don't expect miracles. Processing an x number of pixels can take its time, especially with some effects and in 32bpc mode.
Also be aware that, while AE will handle it, some compressed formats do not lend themselves for working interactively. AE needs to conform them and it will take time to look up the correct time index. This is further complicated if you have lots of clips or rather long clips. You can improve these behaviors sometimes by capturing to different CoDecs or converting the footage.
Part of the problems also may come from the graphics card. Even without OpenGL, AE will use your hardware to decode certain formats if possible and also for accelerated drawing. If your graphics are not up to snuff, have a bad driver or simply are configured poorly, they may have the opposite effect and instead of accelerating your workflow slow it down...
Lastly, make sure your system is in good shape. Work off the fastest disks, clean them regularly of temporary files, defragment them and make sure their RAID/ SATA drivers and configuration are flawless.
Mylenium

Does Visio 2013 work with Office 2010?

Does Visio 2013 work with Office 2010?

Tuesday 01/06/2015
Take a look at this Microsoft KB
KB2784668
It has one reference to Visio and the support / install order of Office.
Now with that said, regardless of 2010 vs. 2013, you can NOT mix 32-bit or 64-bit versions of Office.
For example, lets say I installed Office 2010 SP2 64-bit
(FYI... How to determine Office 2010 SP file version
KB2121559)
I then want to install Visio 2013 32-bit, the install will not work.
You cant mix 32-bit and 64-bit versions of Office Products.
TechNet article explains more...TechNet
(FYI...A few more people are asking the same question...)
Forum 1
Forum 2
(How to determine which version 32-bit or 64-bit version of Office is installed
Stackoverflow.com)
Above article is dependent on Full Office being installed... You can also query the DisplayName REG_SZ key as well, it will report back the Office version.
Registry Location:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
Look for the Office GUID in my example for 2010 64-bit SP2....
Now with the above said, below are notes from one of our desktop support techs in regards to issues we have seen internally running Office 2010 32-bit SP1 and SP2 on Win 7 x64 Enterprise with Visio 2013.....
Office interops. The ability for office and other applications to communicate with other office apps.
The first instance today: User sends corporate communications from word using the send to mail recipient feature. After visio 2013 installed, he received a message stating that word could not communicate with outlook, to either repair office or check the
server. Office was repaired, new outlook profile created. After research, discovered the office is sensitive to various versions in regards to interops. Discovered that Visio 2013 was installed around the time user experienced issues. After uninstalling visio,
when launching word it began to configure (like for a first time install), the send mail to recipient feature began working. This probably will affect anyone with visio 2013. Visio 2010 was not reinstalled afterwards, as user barely uses it and was hesitant.
Installation files are still on his machine in the event that he does need it reinstalled. Office version is 14.0.7109.5000 User is on Office 2010 SP2
The second instance today: Teammate stopped working 3 weeks ago according to user. After working through several support groups here and working with the vendor support, the vendor noted that some dll’s from the application were not registered. If that didn’t
fix it they suggested a reimage. After registering the dll’s, issue persisted. After further troubleshooting, determine that the feature that did not work for user consisted of teammate downloading information from a system, parsing it, then outputting it
to a word document. The application provided no error of any sort, it just would never get to the word document portion. Discovered that Visio 2013 was installed around the time that the issue occurred, and that the issue appeared to be related to office interops.
I uninstalled Visio 2013 and it began working as designed. In both cases Visio 2013 had been installed on 11/25/2014 (I didn’t see any corporate communication about an upgrade, but maybe one took place?). Office version is 14.0.7109.5000 User is on Office
2010 SP2
I’m not sure if you have much experience with interops, but pretty much anytime you want to communicate with a different office application, that is how it is done. Per my reading through various Microsoft KB’s and support forums, different version interops
do not play well together always. It appears that these applications are trying to communicate to office 2010 (v 14) using 2013 (v15) interops, only after installing visio 2013 professional. Users were both Windows 7 x64. We also had a group of several users
who also ran into issues with sharepoint not working in any browser, turned out the problem was Visio 2013 was well....
Feel free to research more, but my own research comes down with having both 2010 and 2013 interops on the machine. To simplify it, the applications and office apps are being told to communicate using office 2013, and but only listen in 2010, causing problems.
Its not causing problems with every simple interop, or we would see it far more widespread, but we are going to continue to see the “ghost” issues where Visio 2013 is the root cause, but nothing is really going to scream it.

"Restore last view settings when reopening documents" option not working with all documents

Said option (found under Edit/Preferences, category Documents), which works like an automatic bookmark in that it takes you back to the same place you were at when you last closed a document, is very useful, but apparently doesn't work with *all* documents.
- Does anyone know what determines whether a given document works with this option or not?
- Is this by design or a bug? A matter of PDF format version?
- Is there a way to work around the problem?
I've compared two documents, only one of which works with the option, to determine what the relevant difference may be, and found two suspects (under File/Properties): the PDF version (1.5 in the document that works, 1.4 in the one that doesn't), and 'Fast Web View' ('yes' in the document that works, 'no' in the one that doesn't).
Thanks,
Michael

This seems to be a problem with some PDF files.
Suggested workaround: If the PDF you have allows "Save As", then try save-as to a new file. The "Restore last view settings when reopening documents" option should then work as expected (in the new file).
(Original post: Restore last view setting not working in version XI)

I have Soundtrack Pro 1.1 It opens OK but the everything takes 4 seconds to work. It's very slow and unusable. Is this a well known problem?

I have Soundtrack Pro 1.1 It opens OK but the everything takes 4 or so seconds to work. It's very slow and unusable in its present state. Is this a well known problem?

STP 3.0.1 was the version designed to work with OSX 10.6.8. Anything earlier than that and issues may arrise. Hard to tell what yours are.
You may want to run Digital Rebellion's Preference Manager to reset the prefs back to the default state. If nothing else, it is a good troubleshooting step.
Good luck.
x

My iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?

my iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?
i try to downgrade to 6.1.3 but its not possible

http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
Downgrading isn't supported by Apple, sorry.

PhotoshopCC works but it's very slow

We have installed Photoshop CC on my PC with Windows 7 and I5 Intel ,8GB RAM, it works but it's very slow, it's impossible to work. On the same machine Photoshop 5 works very good!! There is something that I have to do to increase the performances ?

Moving to Photoshop forum.
Regards,
Romit Sinha

Export pdf doasn´t work with some documents pdf... guive an error?

Why EXPORT PDF ddasn´t translate to WORD in many documents..... guive me an error
Please guivme a solution
Regards
Jose Antonio Resco

De: florencejohn
Enviado el: miércoles, 3 de diciembre de 2014 10:44
Para: José Antonio Resco
Asunto: Export pdf doasn´t work with some documents pdf... guive an error?
Export pdf doasn´t work with some documents pdf... guive an error?
created by florencejohn <https://forums.adobe.com/people/florencejohn> in Adobe Acrobat.com Services - View the full discussion <https://forums.adobe.com/message/6981587#6981587>
What I must do???
Hi jose antonio resco <https://forums.adobe.com/people/joseantonioresco> ,
Please let me know the exact workflow you are following when you get this error.
Are you trying to convert from within Reader or from Browser? BROWSER
If from Reader then make sure you are signed in within Reader, Also try updating Reader to the latest v11.0.09 and check.
If from browser, please let me know which browser you are using and its version? GOOGEL CHRONE and MOZILA
Have you checked with a different browser if possible?yes
Regards,
Florence
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6981587#6981587 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6981587#6981587
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Acrobat.com Services by email <mailto:[email protected]com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=48 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
http://www.avast.com

Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
I found a similar query from March 2014 found here
http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281
Has there been an update released to resolve this
Cheers D

Hi ,
According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Does microsoft word 2010 work with spaces in osx 10.5.8?

does microsoft word 2010 work with spaces in osx 10.5.8?

In order to set up and install the new AirPort Extreme:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
would it work with my older osx 10.6.8?
Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
Only the devices listed above can be used to set up and make any changes to the new AirPort.

Recently upgraded to Mavericks... was working with Pages documents from previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.

Recently upgraded to Mavericks... was working with Pages documents created with previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents. How can I "thaw".... unfreeze Pages? Have several pages windows open that I was working on.

I also had this problem after I installed Mavericks: Pages files freezing at close, need to force quit.
Workaround: when saving any document created with an earlier version of Pages, be sure to untick the "include preview in document".
For some reason, this resolves the problem.
BTW "loose" is not a verb. You probably mean "lose".

Working with StarrOffice Documents

Anybody knows how can i work with starrOffice documents in java? (open, edit,...)

Just unzip and check out the various files in a text editor. It's ordinary XML so you can use your favorite XML parser to parse it.
- Marcus Sundman

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time
Now I am working with FireFox
Today I have noticed that FireFox had this Google Talk pop-up
Maybe this pop-up Google Talk is what is causing Safari 7.1 to crash Attached JING of Google Talk pop-up on FireFox
So, back to SAFARI 7.1..how to stop this pop-up from crashing Safari 7.1

You downloaded a beta copy of 7.1 because the current version is 7.0.5. There was a mixup yesterday and 7.1 was accidentally made available for downloading. Do you have a backup you can restore from to get 7.0.5?
You can also try running the combo update to see if it will restore it.
10.9.4 Combo Update

Master is very Slow, Because Slave Takes 20 minutes for "startup done"

I have two db env to be backup for each other. I stopped one db env for 5 minutes, then restarted it. I found that it took over 20 minutes to receive the db callback event "startup done". During these time, there were transactions in the master db env. I guess this makes the sync_up process take so long time.
I used the ack policy "DB_REPMGR_ACKS_ONE_PEER" and used "txn no sync" flag for transaction, so during these 25 minutes, master is very slow.
My requirement is master can resume its performance as soon as slave comes back. Can slave accept the log before its sync completed? Or any other way to solve this issue?

Most likely what happened is that the stopped dbenv is the only site/peer able to
send the acknowledgement. If it is stopped but not disconnected, then the master
will wait the full ACK timeout for every txn.
It is also likely that during that 5 minutes, log files were archived and when the
stopped dbenv became active again, it had to perform an internal initialization
from scratch. That copies over every page of every database and then the logs
needed to resynchronize. If you have a lot and/or very large database files,
that can take a long time.
The client cannot send any acks until it completes its synchronization. One
way to avoid this would be to perform a manual hot backup to the client before
starting up the application. You would have to copy over all database files, then
all log files from the master (in that order) and then run catastrophic recovery
in that client directory. Then start up your application and the client should be
able to quickly synchronize.
You can control this in the application by setting DB_REP_CONF_NOAUTOINIT
to DB_ENV->rep_set_config. You'll get back an error that tells you that the site
needs an re-initialization and you can do that copying then.
Sue LoVerso
Oracle

Does Edge transport server for Exchange 2013 work with Exchange 2010?

Hello everyone,
I want to install Edge transport server for my Exchange servers,
Could you tell me if Edge transport server 2013 works with Exchange 2010?
Thank you in advance

Hello
tip:
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
2 If you want to create an EdgeSync
Subscription between an Exchange 2010 Hub Transport server and an
Exchange 2013 SP1 Edge Transport server, you need to install Exchange
2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
server.
sorry my english

Word 2013 - Work with Master Documents very slow

Similar Messages

Maybe you are looking for