Word .docs with Horizontally and Vertically oriented pages

I have 30 plus Word .docs that have Horizontally and Vertically oriented pages in them. A new PDF is created each time the orientation changes. Is there a way to have Acrobat keep those in the same PDF?
I am using Acrobat Pro for Mac 10.1.10

As far as I know there are no patches available for the software and OS I am using (I ran the update check on each), but my version of Acrobat Pro is older.
OSX 10.9.4 Mavericks
Acrobat Pro for Mac 10.1.10
Word 2011 14.4.3 (140616)

Similar Messages

Pdf files print with horizontal and vertical lines

All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines. I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result. It is not just that one pdf file either, I have tried multiple files. HELP. Does anyone have any ideas?

It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

CRXIR2 - A chart with horizontal and vertical lines?

Good morning,
Is it possible to create a chart with horizontal and vertical lines?
I have a chart where the Y-Axis show the percentage and the X-Axis shows a timeline.
The horizontal line shows the percentage for the points in time.
Now I would like to mark some special points in time on the X-Axis with a straight vertical line.
Is there a way to do that?
Thank you very much in advance
Christoph

Hello Usama,
unfortunatelly I couldn't find that that feature in the basic chart features.
Also the webpage www.3DGraphics.com doesn't exist and I had no luck to google for 3DGraphics.
It's a little strange, that it seems to be possible to draw one additional horizontal line with the basic features, but no additional vertical line.
for example.
If the main chart would be y=3x+1
It seems to be possible to draw e.g. y=5
But I see no chance to draw x=5
In addition, to make it a little more complicated, I would need to have that dynamically, based on the values of a sql-statement.
thx
Christoph

Table data needs to be displayed with horizontal and vertical lines

Hi,
I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
Can you let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
Regards
Senthil

well it is possible but quite tricky.
All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
- calculate those variables during runtime
- add box-statements with those variables.
to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
regards

Dyanamic table is SAP Script with horizontal and vertical lines

Hi,
I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
I thinking about useing the Box with XPOS and YPOS who value changes dynamicaaly..
But again as the number of pages might be more than one..i think there will issues,
Can you let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
Regards
Senthil

well it is possible but quite tricky.
All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
- calculate those variables during runtime
- add box-statements with those variables.
to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
regards

Datagrid with Horizontal and vertical header?

Hi,
I need to set a datagrid with a vertical and horizontal header, something like this:
http://www.poirrier.be/~jean-etienne/info/csharp/datagrid-app.png
But I need to be able to add labels to the vertical header cells too. Is there anyway to accomplish this with datagrid or advanced datagrid? I have been checking the docs without any luck.
Thanks in advance,
Aron.

Hi!,
Thanks a lot for the information Daiji (As allways). Anyway, this is not what I need. I think I did not provide all needed information.
This grid I will show to the user must be editable. The user must be able to enter data for each row/col combination. I mainly need same funcionality as a datagrid but being able to add a vertical header column for the Y axis.
Thanks in advance,
HexDump.

Linked Word doc with headings and the TOC

I'm relatively new to RoboHelp, so bear with me.
I'm linking in a Word document that is being maintained by others. The document uses Heading 1 styles for auto-numbered chapters, thus:
1 Some topic
lorem ipsum, etc
2 Some other topic
lorem ipsum, etc
To get the 2 chapters into my TOC I create a book from the page and configure my SSL to use that TOC. So far, so good - the TOC appears as I desire. WIthin the document, however (I'm generating PDF) I get both the book name and the heading that is embedded in the text, thus:
1 Some topic
1 Some topic
lorem ipsum, etc
I'm just not seeing how I'm supposed to set this up so that I can avoid the duplicates, given that I really want to stay linked to the original word document rather than just doing a one-time import and then manually editing the resulting html file.
I'm using v9 on Windows 7.
Thanks

Hi there
So let me get this straight. You have a Word document. You suck it into RoboHelp to create HTML. Then you create a completely different Word document using RoboHelp that is then used to create a PDF.
Why not simply create the PDF from the original Word document? Seems more straightforward to me.
Your present workflow (using an analogy) is like this: You are baking a cake. You take the flour and eggs and milk and blend them and bake the cake. Then you take that baked cake and break it up to try and get flour and eggs and milk back out of it and you dislike the fact there are all these crumbs to deal with!
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Horizontal and vertical orientations

If I only create one orientation with the document be locked in it?

A folio can be dual, portrait, or landscape. So yes-- it will remained locked in a single orientation (whatever you create it to be portrait/landscape) unless you have dual orientation.
If you have set up a landscape only folio, for example, it will not automatically try to create a portrait version when turned, it will just remain locked in the landscape orientation.
Its worth noting that you can not mix-n-match orientations-- your ENTIRE document must be either portrait, landscape, or dual.

How do i convert a multi page pdf to a word doc w the same number of pages?

My file started in Adobe Illustrator. It has several pages of text. I converted to a pdf. When I tried to convert to Word with Export PDF, all the pages ended up on a single page, instead of a Word doc with the same number of pages. What do i do to get a pdf of 7 pages to convert to a 7-page Word doc?

Word page layouts are fixed like PDFs. Just add page breaks as needed. But don't expect any kind of good result. If Word could do fancy layout, we wouldn't need Illustrator.

ADOBE READER (9.4.1) prints several files from one Word doc with different pages formats

I work with Word for Mac, version 11.6.1
When I have one document with several pages setup (say different sizes, or landscape and vertical orientation) and I need to convert to PDF, I got several PDF files, one for each page section of my document.
How can I get only one PDF for my whole document ?
Thanks a lot.
STURIONE
Santiago - Chile
Feb 05, 2011

Thank you, MichaelKazlow, for your reply/suggestion.
Actually, I'm not very familiar with this kind of technology, so I'll do my best trying to find out solution following your recommendation.
Tks again.

I cannot send a Pages document, Word format via email from my ipad if it has a picture in the the doc. I can send a Word doc if it does not have a pic in it or pdf with a pic. Any thoughs why a word doc with a pic in it won't email in Pages? thanks

I cannot send a Pages document, Word via email if the doc contains a picture. If I email a Pages doc without a pic in Word format or pdf with a pic it with go through to sender? Not sure why Pages won't send Word doc with a picture in it. I check the security on the email recipient and the email doesn't get blocked or throw in the junk box?
thanks,
drainguy41

If you have upgraded to Mountain Lion, Save As… has returned to the File menu when you hold down the Option/alt key. But you don't really "save" as other file types, you translate & export as Word or RTF or text or PDF & that is easily done by going to File > Export or Share > Export.
Also, please do us all a favor & don't use all capitals in your posts, either the body of the post or the title. All caps is the internet equivalent of shouting & is very hard to read.

Open Word docs with the new Pages?

Pages does not open. I had the new one installed but apparently had the old one still up. How can I open Word docs with the new Pages?

Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

How can I use Automator to open and save Word docs with links?

Hi-
I'm having trouble building a Workflow to open and save Word docs with links.
My Workflow so far:
1. Get Finder items
2. Copy Finder items (to new folder)
3. Rename selected items
4. Open selected items (Word docs)
Three problems occur.
The first is a Word 2004 problem -- I can't get the warning "This document has links in it; do you want to open it with/without updating the links" to go away (Unilke the Macro warning toggle capability, there is nothing in the Preferences for Word 2004 that addresses the links warning, as far as I can tell; any insight you can shed on this would be terrific.)
The second problem happens with Automator: if I manually accept the update of the first document's links, Automator opens that document but then halts completely, even though I've instructed it to open multiple documents.
The third problem I have is that there's no Finder action in Automator that allows me to save the document that's now open (as far as I can see).
Any suggestions for how to fix? If I can get this to work, and scheduled in iCal, it will be an unbelievable time saver.
Thanks,
Jeremy
PowerPC G5 Mac OS X (10.4.6)

Hi there Jeremy,
to do this you are going to have to add in some Run AppleScript steps...
These will rely on GUI Scripting. So first you need to activate GUI Scripting.
Now we need to add in a Run AppleScript action to the end of your workflow...
This will replace your current number 4 in the workflow (Open Selected...)
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run {input, parameters}
set allItems to every item of input
repeat with currItem in allItems
tell application "TextWrangler"
open currItem
end tell
activate application "TextWrangler"
tell application "System Events"
tell process "TextWrangler"
delay 2
--when the Word document is opened I have told it to press okay !
--I don't know what key you want it to press in the dialog box
keystroke return
delay 2
--save the doc
keystroke "s" using command down
delay 5
--close the doc
keystroke "w" using command down
end tell
end tell
end repeat
return input
end run</pre>
The above script should open each Word Document, press a button in the dialog box then do a save and then close the doc...then loop through the rest of them.
You need to replace the name Text Wrangler with Microsoft Word (or whatever it is called!), I don't have it on my Mac.
You will have to let me know what button needs pressing in the first dialog, if it isn't the 'highlighted ' one then we will have to amend the script...
regards
Ric

I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
Thanks again

Can't open Word docs with Pages 08

Since upgrading to SL I found that I can no longer open Word documents sent to me via email attachments. Can this be remedied? I thought Macs were able to "translate" Word files.
Help!

I did discover I can open Word docs with Text Edit, but it's a multi-step process now. I really don't want to upgrade to iWork 09 and I'm not sure that would solve the problem. I also have to use Quick Time now to open movies in iPhoto. Another multi-step process. I'm not very happy with SL.

Word .docs with Horizontally and Vertically oriented pages

Similar Messages

Maybe you are looking for