Workaround for Bug ID 4532517:shouldYieldFocus does not allow side effects

The work-around for this bug is to set the InputVerifier for the component to null, show the dialog, then set the InputVerifier back to the component. However, the behaviour is still not consistent with the Java 1.3 behaviour. The act of clicking in the currently active JTextField, causes the shouldYieldFocus method to be called, even though focus is not being changed to another component. Is there anyway to avoid this behaviour with the work-around (a work-around for the work-around)? Thanks.

Thanky you for the fast reply!
I meant what the author "xxx..@x..." means with "See comment section.". Which comment section is he referencing to?
Greets Alexander

Similar Messages

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

'Master Options' for editing a master spread does not allow me to edit it.

I am trying to create various masters to a documents based on the original A Master.
instructions on InDeign Help, I selected the master I wish to edit,.
selected "Master Options' but it does not allow me to edit the new B master.
WTF?

The reason for basing one master on another is that they need to have the same content on both masters, with other non-shared content on one or more. It makes sense most times to start with a Master page that contains only the shared content.

Bug in which Premiere does not allow publishing of videos to YouTube over 15 minutes.

When I try to publish a video to YouTube over 15 minutes I get this error: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of video and try again."
Clearly YouTube's policies change over time - they allow videos much longer than this. Shockingly, Premiere does not offer any option to override this limit which obviously should not be set in stone. Please help.

SteveNewYork
No bug.
If you are using Premiere Elements 9, 10, 11, or 12, the upload to YouTube from within the project feature is stated and is
2.00 GB/15 minutes. So no bug. The YouTube dialog in the sharing section of 9, 10, 11, or 12 clearly state that. Now, if you have a version earlier than 9, you will run into limits of 2048.0 MB (aka 2 GB) and only 10 minutes. Those earlier versions were never updated to 15 minutes when Adobe extended the time for its YouTube feature from10 to 15 minutes going from version 8 to 9.
The YouTube limits for its upload at its site are governed by YouTube and not Adobe. In fact, I have been told that you can get extended upload times there with special accounts. I do not believe that YouTube has changed its basic time 15 minutes. Rather is offering "regular" 15 minutes as well as an extended time for those who request it. See link at the end of the next paragraph.
If you have a Premiere Elements Timeline content that is greater than 2.0 GB/15 minutes, then your ONLY choice is to export that Timeline content to a file saved to your computer hard drive and then upload that file to YouTube at the YouTube web site after you make whatever arrangements so that you do not end up with just 15 minutes there. If you have not seen the following already, the following is YouTube information found online on getting more time for larger uploads
https://support.google.com/youtube/answer/4523193?hl=en&rd=1
If you need help deciding on the settings for exporting a file saved to your hard drive for upload to YouTube at the YouTube web site, I would be glad to offer suggestions based on the properties of your Premiere Elements Timeline. More specific information will be offered once we know that information and what version of Premiere Elements you are using and on what computer operating system the program is running.
We are not Adobe. Just user to user. If you want to call this matter to Adobe's attention, you might be interested in filing an Adobe Feature/ Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
ATR

Rejected by server becuase does not allow relaying

rejected by server because it does not alloe relaying ???????

This message generally means the SMTP server for your email provider either does not allow you to send mail off their network, or you have not completed setup of the server with authentication. Re-check your settings for the account from your email provider and make any necessary adjustments to the setup on the phone.

Help ,Disk utility does not allow me to partition my internal HD

hello , i want to partition my internal hard drive but for some reason disk utility does not allow me to , when i click on the partition window everything is greyed out, i read on other thread that file vault might be the problem but is already off , i can t figure out what the issue is any ideas ??? here is a screenshot.

Not if you want to be able to restore the Boot Camp partition using Boot Camp Assistant. There are alternative boot loaders you can use to add Windows and Linux to an OS X drive. You would first need to restore your drive by deleting the Boot Camp partition you now have. Then take a look at The rEFInd Boot Manager: Getting rEFInd - Roderick W. Smith.

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll?

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll, the applications can be redownloaded and she had no music. Is there any known bug about ipods locking on their own because no one seemed to have tried to bypass the 4 digit code and it is locked for 26 million minutes.So thank you if anyone has any information or help for us.

Your friend may have placed the ipod next to an object that repeatedly pressed the screen. Under certain circumstances this can lead to what appears to the iTouch to be failed attempts to access the system. After repeated failed attempts, the Touch increases the waiting time required for the password and may ultimately lock in the way you describe.
It's been a while since this was posted, but this might be informative to someone else who finds themself in a similar predicament.

[svn] 3668: Fix for SDK-15941: selectedItem/ selectedIndex does not render as selected.

Revision: 3668
Author: [email protected]
Date: 2008-10-15 15:25:04 -0700 (Wed, 15 Oct 2008)
Log Message:
Fix for SDK-15941: selectedItem/selectedIndex does not render as selected.
Reviewer: Deepa
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15941
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxList.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxListBase.as

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

[svn] 3313: Fix for SDK-16981 - @ param tag does not recognize tab character as delimiter between paramName and paramDescription

Revision: 3313
Author: [email protected]
Date: 2008-09-23 10:02:50 -0700 (Tue, 23 Sep 2008)
Log Message:
Fix for SDK-16981 - @param tag does not recognize tab character as delimiter between paramName and paramDescription
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16981
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Check for Rentals on Apple TV does not work

I have rented many movies in the past using Apple TV. I have not had a problem until now, right after I just updated my Apple TV software to the latest software v6.0 (6646.65).
Last night (9/28) I rented World War Z. Roughly 20 minutes into the movie, I stopped the move by hitting the menu button. This exited me from the movie and back to the movies rentals screen. I then rented another movie only a few minutes after exiting the first. I had no problem renting the second movie as I did not exit the movie once the streaming started.
A few hours later I went back to watch the move by selecting the movie. The rental option was still availabe. By selecting to rent the movie again and then selecting "Rent and watch now", the system told me I had already rented the movie and I should go to Settings->Downloads->Check for Downloads. This options does NOT exist in the settings menu; however, I found a similar option under iTunes Store->Check for Rentals.
This "Check for Rentals" option does absolutely nothing - or it doesn't show anything if it is doing something behind the scenes. It just shows the spinning lines. I waited all night for something to happen. I restarted my router and modem to make sure there was nothing wrong with networking. Again, I had just watched another movie all the way through with no problems. I sent Apple Support an email with my issue and they refunded my $4.99 for the movie rental.
So, tonight (9/29), I still wanted to watch the movie and I wanted to see if it would work. I went to the movie, selected to rent the movie and it gave me an optionsaying that I had already rented the movie and asking me if I wanted to rent it again. I selected to rent it again. I was able to watch the movie all the way through with no problem.
I ended the movie during the credits by hitting the menu button. I immediately went back to the movie to see if I could continue the movie since I should be able to watch this movie in the next 24 hours. The same situation happened again. I was told I could not rent the movie again, but to go to Settings->Download->Check for downloads. The "Check for Rentals" is doing the same thing.
So, my question is how do I fix this or is there even a fix for this situation? If I can't watch a movie without the fear of exiting the movie for whatever reason and not be able to return to the rented movie, I will not continue to rent movies from Apple TV. I enjoy renting them through Apple TV, but I definitely have multiple options (i.e. XBox Live, PS Network/Amazon, Redbox, etc.). I really want to understand why this is happening and if it's going to be fixed.
Thank you for any feedback!

I have been working on this project for just one day. Other people have suggested logging out and then logging back in. I have had sucsess with this sollution today.
Check this thread as well.
https://discussions.apple.com/thread/5360214?start=0&tstart=0

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

Workaround for Bug ID 4532517:shouldYieldFocus does not allow side effects

Similar Messages

Maybe you are looking for