Workbook Views are not getting refreshed

Hi Folks,
We have a workbook in PRD, in which we have 5 tabs. All these tabs are containing different views from different queries. Each tab contains 3 or 4 views from the corresponding query .
The problem here is when we move from one period to another period then all the views are showing data for the current period except the views in tabs 3 and 4.
In workbook variable input screen we have six variables and out of which couple of variables are for year and version, these variables are having default values. Some one told me that the issue is because of default values. If that is the case then the entire workbook should not show any data as all the views are having more or less the same variables.
Not sure what the issue is? please advise what needs to be done?
Regards,
SK

Hi,
I have checked the given notes but they did not help me much even though the issue is related them. I am getting some Active X error while trying to open the query after downloading the SAPBEX from the notes. We are in BI7.0 so I hope we should not get the problems mentioned in these notes.
PLease let me know whether there is any note which applies for SAP BI7.0.
Thanks.
Regards,
SK

Similar Messages

  • Data of different session are not getting refreshed.

    We used select one choice and it is bind to the iterator. Data of different session are not getting reflected.
    Problem Scenario : Two browsers are open with same screen . In browser-1, I am adding new item which display on drop down of same screen. But drop down of browser-2 is not displaying the new added value.
    Please let me know how to refresh the data of browser-2 if I added data on different session.
    //JSFF entry
    <af:selectOneChoice binding="#{backingBeanScope.Product.ICTCSTName}"
    id="iCTCSTName" simple="true"
    label="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.label}"
    required="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.hints.mandatory}"
    value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.inputValue}"
    autoSubmit="true">
    <f:selectItems value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.items}"
    binding="#{backingBeanScope.Product.si2}"
    id="si2"/>
    </af:selectOneChoice>
    //Pagedef entry
    <list IterBinding="tpCrudeSuperTypeFindAllPopulatedCTIterator"
    ListOperMode="navigation"
    ListIter="tpCrudeSuperTypeFindAllPopulatedCTIterator"
    id="tpCrudeSuperTypeFindAllPopulatedCT" DTSupportsMRU="true">
    <AttrNames>
    <Item Value="superTypeName"/>
    </AttrNames>
    </list>

    Are you sure backingBeanScope is the correct scope for your scenario?
    Session scope sound more appropriate to me.
    binding="#{backingBeanScope.Product.si2}"

  • Query Views in Workbook are not getting refreshed

    HI Folks,
    Query views atatched in workbook are not showing any data when we move from previous month to current month. So we are creating views for current month and attaching them to workbook manually at this moment.
    Please advise what needs to be done to make the views get refreshed automatically according to the variable values we select.
    Regards,
    SC

    Hi,
    Thanks for your reply.
    I will explain the issue again so please tell me the process we are following is correct or not?
    Last month we created views for two queries and attched them in the workbook, the variable values which we have given at that time were month = 01 year 2010.
    This month when we try to access the workbooks we are getting 0 records in the views of the workbook.
    now my doubt is:
    If we create views for variable values month jan and year 2010, will they show output when we change the variable values to Feb, 2010?
    or
    Do we have to create new views every month and attach them to the existing workbook manually?
    PLease revert.
    Thanks
    SC

  • Oracle Materialized view tables not getting refreshed automatically.

    At Destination:--
    CREATE MATERIALIZED VIEW PROG_MEDIA
    TABLESPACE ONA_TS1
    BUILD IMMEDIATE
    REFRESH FAST with rowid
    START WITH SYSDATE
    NEXT SYSDATE+1/96
    AS (select /*+ PARALLEL(a,6) */ * from PROG_MEDIA@onair a);
    exec dbms_mview.refresh('PROG_MEDIA','C');
    At Source:--
    CREATE MATERIALIZED VIEW LOG ON ONAIR.PROG_MEDIA
    TABLESPACE MVLOG
    WITH ROWID;
    Fired manually:--
    13:00:43 SQL> exec dbms_mview.refresh('PROG_MEDIA','C');
    PL/SQL procedure successfully completed.
    At source:--
    13:18:35 SQL> select PROG_MEDIA_ID,PROG_MEDIA_NAME from PROG_MEDIA where PROG_MEDIA_ID='102226';
    PROG_MEDIA_ID
    PROG_MEDIA_NAME
    102226
    test
    At Destination:--
    14:03:28 SQL> select PROG_MEDIA_ID,PROG_MEDIA_NAME from PROG_MEDIA where PROG_MEDIA_ID='102226';
    PROG_MEDIA_ID PROG_MEDIA_NAME
    102226 UTSAV-5-162077
    JOB LOG_USER THIS_DATE LAST_DATE_TIME NEXT_DATE_TIME INTERVAL FAILURES WHAT
    242 ONAIR 17-05-11 14:17:24 SYSDATE+1/96 7 dbms_refresh.refresh('"ONAIR"."PROG_MEDI
    A"');
    242 ONAIR 17-05-11 14:32:25 SYSDATE+1/96 8 dbms_refresh.refresh('"ONAIR"."PROG_MEDI
    A"');
    1> I have scheduled this refresh job for every 15mins, but its not getting executed. Also my job_queue_process is '20'. Whenever i execute it manually it get's refresh.
    2> I can schedule a cron for the same for every 15mins but i really dont want to do it.
    Kindly help me out.

    Hi,
    I have created MV_CAPABILITIES_TABLE & executed below commands:--
    17:56:54 SQL> EXECUTE DBMS_MVIEW.EXPLAIN_MVIEW ('"ONAIR"."PROG_MEDIA"');
    PL/SQL procedure successfully completed.
    17:57:26 SQL> SELECT capability_name, possible, SUBSTR(related_text,1,8)
    17:57:27 2 AS rel_text, SUBSTR(msgtxt,1,60) AS msgtxt
    17:57:27 3 FROM MV_CAPABILITIES_TABLE
    17:57:27 4 ORDER BY seq;
    CAPABILITY_NAME P REL_TEXT MSGTXT
    PCT N
    PCT N
    REFRESH_COMPLETE Y
    REFRESH_COMPLETE Y
    REFRESH_FAST Y
    REFRESH_FAST Y
    REWRITE N
    REWRITE N
    PCT_TABLE N PROG_MED relation is not a partitioned table
    PCT_TABLE N PROG_MED relation is not a partitioned table
    REFRESH_FAST_AFTER_INSERT Y
    REFRESH_FAST_AFTER_INSERT Y
    REFRESH_FAST_AFTER_ONETAB_DML Y
    REFRESH_FAST_AFTER_ONETAB_DML Y
    REFRESH_FAST_AFTER_ANY_DML Y
    REFRESH_FAST_AFTER_ANY_DML Y
    REFRESH_FAST_PCT N PCT is not possible on any of the detail tables in the mater
    REFRESH_FAST_PCT N PCT is not possible on any of the detail tables in the mater
    REWRITE_FULL_TEXT_MATCH N PROG_MED mv references a remote table or view in the FROM list
    REWRITE_FULL_TEXT_MATCH N PROG_MED mv references a remote table or view in the FROM list
    REWRITE_FULL_TEXT_MATCH N query rewrite is disabled on the materialized view
    REWRITE_FULL_TEXT_MATCH N query rewrite is disabled on the materialized view
    REWRITE_PARTIAL_TEXT_MATCH N materialized view cannot support any type of query rewrite
    REWRITE_PARTIAL_TEXT_MATCH N materialized view cannot support any type of query rewrite
    REWRITE_PARTIAL_TEXT_MATCH N query rewrite is disabled on the materialized view
    REWRITE_PARTIAL_TEXT_MATCH N query rewrite is disabled on the materialized view
    REWRITE_GENERAL N materialized view cannot support any type of query rewrite
    REWRITE_GENERAL N materialized view cannot support any type of query rewrite
    REWRITE_GENERAL N query rewrite is disabled on the materialized view
    REWRITE_GENERAL N query rewrite is disabled on the materialized view
    REWRITE_PCT N general rewrite is not possible or PCT is not possible on an
    REWRITE_PCT N general rewrite is not possible or PCT is not possible on an
    PCT_TABLE_REWRITE N PROG_MED relation is not a partitioned table
    PCT_TABLE_REWRITE N PROG_MED relation is not a partitioned table
    34 rows selected.
    Elapsed: 00:00:00.09
    What to be done next?
    Also i fired the job manually by:--
    17:38:02 SQL> set serveroutput on
    17:39:45 SQL> EXEC DBMS_JOB.RUN(242);
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.48

  • Drill through reort parameter are not getting refreshed

    Hi I have created one drill through report. The functionality is like this I have main report and when I click on value of report that value get passed to drill through report and report displays based on parameter passed.
    But now the porblem is if I change the parameter value and click on view report button the reort with updated parameter values doesnt display on report pan. I see old parameter values on screen. Please note that this is multi value parameter.
    can some body help me with this issue.
    For example
    I have created report with parameter Country with multiple values set to true. Through main parameter I am passing America and I get reports based on parameter value America now on second report when I changes the values of country parameter America to Canada
    it doest get refreshed at all. I get same value in Country parameter.

    Hi Swapnil,
    According to your description, you have a drill through report. After you click and pass a report to the target, it will not update the records if you change values in parameter selection. Right?
    In this scenario, the reason why the target report doesn't update records because you don't specify the available values for parameter in target report. So it can only receive the value passed from source report. For this issue, you just need to specify
    the Available Values for the parameter in target report. Don's set the Default Values for parameter. Otherwise it can't get value passed from source report.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Workbook not getting refreshed at a time

    Hi,
    I have created a workbook having 5 sheets using a single query. Only difference between each sheet is in the filter criteria of a particular field. For eg- There is a column 'Customer Group', according to the requirement each sheet should show different 'Customer Group' (eg- Complimentary, Distributor, Employe etc, all this are present under Customer group).
    Now, when I am refreshing the workbook to change the selection criteria all the sheets are not getting refreshed, only the open sheet is getting refreshed.
    So, can anybody help me out as i need to refresh the whole workbook in a single go.

    Hi Riyez,
    I know that refresh button refresh all the sheets in the workbook. But in this case though the variable screen is same for each & every sheet, I have to refresh each & every page separately.

  • Values not getting refreshed in web report.

    Hello Friends,
    Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
    IMS is the combination of all divisions and IMR is the combination of only three divisions.
    In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
    Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
    and using new selection we have restricted the divisions with IMS,IMN,etc.,
    IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
    IMN... all are with single divisions
    Now we have assigned the query in the data provider for select options in hte web report,
    But when we select any options the values of the remaining queries are not getting refreshed.
    If we use the divisons directly with out using the structures the values are getting refreshed.
    Can any one give me the solutions for this?
    Regards
    Srinivas

    Hi Mansi,
    Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
    If the solution is not related to your question, please provide more details.
    Thanks,
    Rajesh

  • DDocType meta filed not getting refreshed

    Not sure what could be the cause for this. I added some values for dDocType meta data fleld. The values are not getting refreshed. I restarted the server removed browser cookies but still the doct types I see is old. I checked the database to see if the table is updated with values. The values in the table are correct. What could be the reason for dDocTypes not showing the latest entries?
    Regards,
    Pratap

    This sounds familiar, I think I solved it by just restarting the browser.
    Also check that you're not using pre-defined values for your rules.

  • Exchange Mails are not getting updated properly without refreshing

    From couple of days, exchange mails are not getting updated properly without refreshing.
    Kindly suggest.

    Kindly suggest a solution

  • Report is not getting refreshed after changing prompts once again?

    HI,
    I am running some webi and deski reports using webi sdk also i'm handling the prompts of
    report.
    Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
    then i fill all the prompt for the report it shows the data for selected prompt values.
    But if i once again changed prompt values it shows data of previously selected prompt values not for
    the currently changed prompt values. means reports not getting refreshed.
    sometimes its work correctly.
    What will be problem?
    How can i resolve this issues?
    Please help me
    Thanks in advance
    Harshad

    The workflow is:
    1. Refresh
    2. Set Prompts
    3. Get View.
    then repeat.
    Are you refreshing before setting prompts?
    Sincerely,
    Ted Ueda

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

  • Oracle BI Publisher Report from OEM12c data is not getting refreshed...

    Hello,
    We've integrated BI Publisher with EM12c. I've developed a report which checks a given database extents information (initial, next, maxextents) at tablespace level. The dataset is chosen as EM repository. The report runs absolutely fine until new data is added to a database. For eg, I created a new tablespace. The new tablespace related info is not getting refreshed despite the fact that I've refreshed the data source and checked that the tablespace exists in the database.
    Can anyone pls help.
    Thanks,
    Dhananjay

    Dhananjay,
    Has the data in the EM repository view been refreshed? The report retrieves data via the published repository views. If the view does not display the latest information, then you will have to wait till the relevant config or monitoring collections are complete.

  • Changes to Excel files are not getting updated

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.

    Hi,
    According to your post, my understanding is that changes to Excel files are not getting updated.
    I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
    For more information, you can refe to:
    Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
    If you use PowerPivot, you can refer to:
    Refreshing PowerPivot Data in SharePoint 2013
    If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
    You can refer to:
    PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Team view data not getting refers for some user

    Hi,
    We are facing an issue in team view app for mss,  manager's are seeing details of employees not belonging to their Org Unit/ data not getting refreshed. This seems to be the Cache related issue where the data of perviously logged in user is displayed to the current user till browser cache are cleared manually.
    User don't have permission to clear browser cache. Is there any work around.The issue is coming only for some users.I have enable the 'ABAP HTTP Security session Enabled' property of the system used.
    Regards
    Pallavi

    Hi Karthik,
    in the first view I execute the BAPI and in the second view I show the results. In the second view I also submit the modified data via another BAPI.
    As I execute and display result of same BAPI in two different views I have bound the same model node to both of these views. Let me give you some sample code for understanding what have I done.
    In the first BAPI's search action handler I have written:
              Zsr_Packnr_Validate_Components_Input input = new Zsr_Packnr_Validate_Components_Input();
              wdContext.nodeZsr_Packnr_Validate_Components_Input().bind(input);
              input.addT_Version(new Zsr_Packnr_Field_Values());
              input.addT_Zsr_Genbr(new Zsr_Packnr_Field_Values());
    input.setZsr_Gmc(globalMaterialCode);
              input.setZsr_Mrc(mrc);
              input.setZsr_Ctry(country);
              input.setZsr_Dc(distributionChannel);
              input.setZsr_Div(commercialSegment);
    wdContext.nodeOutput_Validate().invalidate(); //as u suggested
              wdContext.currentZsr_Packnr_Validate_Components_InputElement().modelObject().execute();
              wdContext.nodeOutput_Validate().invalidate();
    In the second BAPI I just display the output node from the same Model context node (its mapped to the second view too).
    But as I said whenever I update some values in the result set and submit it the data gets submitted properly. But when I press the search button again, the previous set of data gets populated, not the just updated data.
    If anybody has some idea on why the second time search BAPI execution still shows the previous set of result it will be a great help to me.
    Thanks for all your help.
    Shubhadip

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

Maybe you are looking for