Workflow server installation

Hi,
I installed 9.2 database and after that while installing workflow server 2.6.2 as per Oracle Workflow Server Installation Notes for WF 2.6.2 bundled with 9iDB R2: The http server is running fine.
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/workflow.920/a96643/toc.htm , I am getting problem in step 5. While giving the http://<server_name>[:<portID>]/ I am not getting the pages to set the the following
In the Oracle HTTP Server Components page, choose "mod_plsql".
In the Gateway Configuration Menu page, choose "Gateway Database Access Descriptor Settings".
In the Database Access Descriptors page, choose "Add Default (blank configuration)".
Create a DAD for Oracle Workflow, specifying the following settings:
Database Access Descriptor Name: <your Workflow DAD>
Schema Name: <Leave Blank>
Oracle User Name: <Leave Blank>
Oracle Password: <Leave Blank>
Oracle Connect String: <CONNECT_STRING>
Authentication Mode: Basic
Session Cookie Name: <Leave Blank>
Package/Session Management Type: Stateless (Reset Package State)
Enable Connection Pooling?: Yes
Default (Home) Page: wfa_html.home
Could any one please help me in this issue.
Thanks,
Anil.

I am notsure what your issue is here, I think you might want to look at logging an iTAR. Your webserver may not actually be running properly if you are unable to see these pages.
Hi,
I installed 9.2 database and after that while installing workflow server 2.6.2 as per Oracle Workflow Server Installation Notes for WF 2.6.2 bundled with 9iDB R2: The http server is running fine.
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/workflow.920/a96643/toc.htm , I am getting problem in step 5. While giving the http://<server_name>[:<portID>]/ I am not getting the pages to set the the following
In the Oracle HTTP Server Components page, choose "mod_plsql".
In the Gateway Configuration Menu page, choose "Gateway Database Access Descriptor Settings".
In the Database Access Descriptors page, choose "Add Default (blank configuration)".
Create a DAD for Oracle Workflow, specifying the following settings:
Database Access Descriptor Name: <your Workflow DAD>
Schema Name: <Leave Blank>
Oracle User Name: <Leave Blank>
Oracle Password: <Leave Blank>
Oracle Connect String: <CONNECT_STRING>
Authentication Mode: Basic
Session Cookie Name: <Leave Blank>
Package/Session Management Type: Stateless (Reset Package State)
Enable Connection Pooling?: Yes
Default (Home) Page: wfa_html.home
Could any one please help me in this issue.
Thanks,
Anil.

Similar Messages

Workflow server installation error...

I have been trying to install workflow server on a Windows box. I get the following error during installation:
"Unable to find product oracle.swd.jre [1.1.6, 1.1.7.27] in Oracle Inventory".
However, I could see a directory "oracle.swd.jre" under c:\Program files\Oracle\Inventory\Components and c:\Program files\Oracle\Inventory\Components21.

Looks like an Oracle Installer Issue. Please check if the OUI folks have any patches/resolution
Raja

Workflow server end embedded PL/SQL and XDB

Hi,
I read in the Installation Guide that we must use Apache. We have Oracle 11.1.0.7 and embedded PL/SQL (from APEX) and don't use Apache. Is it possible to do so and install Workflow server without a HTTP-Server?
Thank you for your help
Siegwin

The Workflow Server is NOT certified with oracle database version 11g. But yes if you are using DB 10gR2 then without HTTP server you can install Workflow Server and use that. Conceptually, it applies on 11g also but Workflow Server is no more released with Oracle 11g DB, so I can not comment whether you would be able install and use Workflow Server with 11g.

Workflow Server version conflict

Hi All,
I have installed Oracle Application Server 10.1.2 (OID, J2EE and BI). I want to install workflow schema on my database. Can you please suggest, what version of Oracle Workflow Server should I install? The reason why I am asking is, when we tried installing workflow version 2.6.3, we got an error regarding oracore9.dll not found. The BIN directory where this file has to be, has file with name oracore10.dll. I am not able to find any other version than 2.6.3 of workflow.
Please suggest...
Thanks,
Aniket

Marco,
From the server installation notes:
Connect Method - Select Local to connect to a local database using the Oracle SID, or select Remote to connect to a remote database through Oracle Net using LOCAL on Windows or TWO_TASK on UNIX.
Connect String - If you choose the Remote connect method, enter the connect string for the remote database.
Hope this helps..
Raja

Crystal reports and adobe workflows server

Hi,
Is there a way to integrate crystal reports and adobe workflow server
Regards
Raja

I believe AWS 6.2 supports Crystal Rpt 8.5, but don't hold be to it.
The AWS appl. does come with prebuilt reports incl. You should check the documentation concerning installation, but I believe AWS requires the Crystal Engine to be installed on the same server as the AWS Web Access component.

Oracle workflow server with linux

In "10g Release 1 (10.1.0.4) Patch Set 2 for Linux x86 Patch Set Notes", it is mentioned that modplsql is not currently supported on Red Hat Enterprise Linux 4. For this reason, HTML DB and Oracle Workflow are not currently supported on Red Hat Enterprise Linux 4.
Does this mean that workflow monitor cannot be used? Or workflow server itself cannot be used in Linux?
Is there any workaround for this problem? If I want to abort a process flow execution, is there a way to do it without using workflow monitor? In one of the other postings I saw a reference to abort method of workflow engine but this package does not seem to exist in the workflow server recent versions.
Thanks,

Hi,
The modpl/sql requirement will stop you being able to use the Workflow monitor, but the core functionality of the module will remain unaffected.
To abort a process, the WF_ENGINE package should have a procedure called AbortProcess - I haven't got a Linux installation to check on at the moment, but I;d be surprised if they have removed it, since this is used in a number of processes.
HTH,
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com

Cannot install Oracle workflow server 2.6.3 for window

Hi all,
I have Oracle server on my PC, and create a database instance (with the Data warehouse option).
I download the Oracle workflow server 2.6.3 from Oracle download page (inside the term Workflow Server of Database). I do modify the init.ora file with the corresponding parameters: aq_tm_processes = 2 and job_queue_processes = 10 as in the Installation Notes before running the Oracle Universal Installer.
However, I always receive the error (after the analyzing dependencies step: "This is not a 10g Oracle_Home"). It is so weird because the directory specified is the ORACLE SERVER.
Please Help Me To Figure Out this problem as soon as possible.
Thanks so much,
Tien

This forum is for reporting any download issues. You may want to repost your question in the Oracle Workflow forum: Workflow

Older versions of Workflow Server

Does anyone know where I can locate older versions of the Workflow Server, specifically 2.6.2? I can only find the newest version, 2.6.3, on OTN.
-Rich

Oracle Workflow Release 2.6.2 was bundled with Oracle9i Database Release 2 and also with Oracle9i Application Server Release 2 (9.0.2).
Please see:
http://otn.oracle.com/software/products/oracle9i/index.html
Within the Oracle Universal Installer, select the product Oracle9i Management and Integration. Then select the Custom installation type and select Oracle Workflow from the available product components.
Or see:
http://otn.oracle.com/software/products/ias/devuse_9ias_r2.html
In this bundle Oracle Workflow is included in the Oracle9iAS InterConnect - Hub installation type.

SharePoint Server 2013 single server installation licenses and system requirements

We are thinking of setting up a SharePoint Server 2013 for the following features to be accessed by our test team (<100 users)
Our requirements are as follows -
Total user access <100 users(starts with 50 and may be go upto 100)
Mainly Access to TeamSite(Document library), WiKi, BI reports view(SSRS Reports integration)
We have a Visual Studio Ultimate license that covers SQL Server 2012 and Share Point server 2013.
We have also got a Amazon EC2 machine access to create a Xlarge box with Microsoft recommended Cores, Memory, storage for SINGLE INSTALLATION of SharePoint Server 2013 and SQL server database on Windows Server 2012
My queries are as follows
Are the licenses above sufficient to go ahead with setting up the SP Server? or do i need any other licenses ?
I would like to create local LDAP in amazon without connecting to the company active directory. Would this be possible? We have users from other locations(different countries) providing services to our company and we would like them to access this portal
to share and access docuemnts without any network issue etc..
Are there any known firewall issues with EC2 machines for share point deployment
System requirements for single server installation (with or without BI reports)
Please note this implementation is only for internal use by the test team and is not critical. Not a production implementation.
Is there any better solution?
Much appreciate your help
Thanks
Vara

MSDN subscription licenses for SharePoint aren't, as far as i know, for use as production devices. This means that whilst you can use it for testing and development you can't use that license for the SharePoint server that you'll all be using.
As such I think you will need to buy a SharePoint 2013 server license. The same goes for SQL, Windows etc.
There is also the question of user licenses, ie. CALs. I don't remember if those come included as part of an MSDN subscription.
2) Possibly. As long as Amazon can host a domain for you it should be possible.
3) Pass. Microsoft prefer you to use Azure and most of my training and experience is with that.
4) High. 4 cores, 24GB of RAM minimum.
http://technet.microsoft.com/en-us/library/cc262485.aspx#hwforwebserver
You'll either need a 2XLarge or a memory orientated box, in which case you won't have much storage space.
Internal team infrastructure is still important. If you're using it enough to make it worth having then you need it there and running.
Have you considered using Office 365?

SAP DMS server installation Query

Guys,
I would like to share my plans on DMS server installation under DEV,Quality,prod stage and requesting you all to validate and send me any comments if I am wrong anywhere.
-        We have 1 external DMS server of (250Gb capacity)
-     We are now in realization phase, As we know that we have 3 servers namly Development, quality and production server.
-     In Development Server we do Baseline DMS customization
-     In Quality server we do Integration testing
-     There will be as external computer with harddisk capacity of 80 GB,I will Install Content server CD and make that 80GB hard disk as content server for storing the documents, create content repository and store the documents which are to be tested under both development and quality server stage(Note : we can use SAP database for both testing purpose but If we load huge data there,it will slowdown the server drastically)
-     During the production server install the DMS server (250 gb) and define the content repository config under production server and start storing all the fresh document
-     Note: Since the tested documents are stored in local PC we can avoid all the tested documents under quality stage only,once the DMS server is installaed in production server we can freshly load the documents.
-     Note: I knew I have to install twice the Content server cd(once with 80 GB local hard disk and later with External DMS server)
This is how I planned, I request you to highlight the pain areas by this method else give me the confidence of how I planned?
I appreciate for immediate solution; also how does Kpro comes into picture here.
Points will be rewarded for sure.
Regards,
Murali.S
DMS consultant

Hi Murali,
As per my understanding you want to keep a Temporary Content Server for your Dev & QA system but a full fledge 250GB Content server for Production.
This is a Good method you are following, i.e. when you go for production you will not have any junk data, you will be loading only fresh data (originals) into it.
There is nothing harm or pain in doing this, only thing is you have re-configure the Content Repository and Category in Production System (SAP).
Your Basis person has to open Production System for doing this Settings (Defining Content Repository and Content Category with Port, HTTP, etc)
Document Area to be ensured in each client at any point of time, Physical machine, IP address, Port etc.
You can maintain a Excel sheet with a following Columns:
<b>Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port.</b>
For Transaction OACT & OAC0.
Rest your method is fantastic.
Best Regards
Rehman
Reward Your Points If satisfied.

New Server Installation, now client computers can't connect to services. Where to go from here?

Hello.
I recently had to setup a new Mac Mini Server (Mavericks). We had one previously but one of the raided hard drives failed. No backup.
Our office of 6 Apple MacBook Pros used to connect to all file sharing and calendar services, easily.
On the new Server installation, I added the same users with the same passwords etc. The client computers cannot access calendars, file sharing etc. On the clients, I have opened up System Preferences > Users & Groups > Login Options > Network Account Server and added the FQDN of the server, but I get an error ' Unable to add server. Connection failed to the directory server. (2100) '
2 of the clients are on Mountain Lion. The rest are on the latest Mavericks.
I'm a bit lost on where to go from here and would appreciate your help before I wipe everything and start from scratch.
Thanks.

Hi Strontium90
Ha! There was a time machine backup, but we had a storm here which rendered it and the server useless. We are such a small team without an 'IT' guy, apart form me as I have a vague interest in all things Apple.
What is your DNS name space?
Do you need the name here?
Do the servers and the client agree on this name?
Not sure what you mean. The domain name works as when I type it into a web browser, I can see the 'Welcome to Server' page.
Did you enable an Open Directory Master?
Yes. Open Directory is running.
Did you grant the users/group access to the service you are offering?
Yes. All services are checked for each user.
Make sure the user/group is permitted to access your enabled services.
All allowed, too.
Oh, and implement a backup strategy
Will do, once I sort out this problem. Time Machine and off-site, I think.

Start multiple domains simultaneously on 1 Weblogic server installation?

Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.

Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Service Manager data warehouse management server Installation fails

Hi there,
In Virtual Machine Windows Server 2012 R2 Standard with my user being a Local Admin and SQL Admin. I tried to do a Service Manager data warehouse management server
first installation I am facing the following image as error:
In the event viewer I get the following error:
"Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211
The arguments are: -2147024809, The parameter is incorrect."
In the Setup log, some of the errors are:
WixRemoveFoldersEx: Entering WixRemoveFoldersEx in C:\Windows\Installer\MSI35E.tmp, version 3.7.1224.0
WixRemoveFoldersEx: Error 0x80070057: Missing folder property: PSCONFIGFOLDER.A591E3B4_D228_431D_BF89_99D52C8FFB76 for row: wrf4582BC4C5CC47B1D2380408CD7A752DC.A591E3B4_D228_431D_BF89_99D52C8FFB76
CustomAction WixRemoveFoldersEx.A591E3B4_D228_431D_BF89_99D52C8FFB76 returned actual error code 1603 but will be translated to success due to continue marking
CAStartServices: CAStartServices was passed . OMCFG
CAStartServices: Checking if service already started. OMCFG
CAStartServices: Attempting to start service. OMCFG
CAStartServices: StartService failed. Error Code: 0x8007042D.
ConfigureSDKConfigService: CAStartServices failed, trying again.... Error Code: 0x8007042D. OMCFG
Action start 17:47:05: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (EC!4C) [17:47:05:483]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
I have checked the following post but it did not help me:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c42bb04d-a51e-4037-a8a3-37d714d6faac/scsm-management-server-installation-fails?forum=systemcenterservicemanager
Could you please help me with this issue?
Thanks a lot,
M

Hi,
Sorry I cannot post the full log. I have found also these errors in the log:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: There is no previous serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\InstallationAccount
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSMDWadmins
RegisterSdkSCP: Error: Access is denied.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "D:\Program Files\Microsoft System Center 2012 R2\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
Thanks for your reply.

Workflow server installation

Similar Messages

Maybe you are looking for