Workspace or Application Import doesn't work

I have Oracle 11g installed on Windows Server 2003. After database installation, I made APEX upgrade from default version 3.0. to last 3.2.1. Now, when I try to import Workspace or Application, I get Internal Server Error, and browser path is http://myserveraddress:8080/apex/www_flow.accept.
It is obviously some kind of error in some of this packages...
Any similar expiriences? Please help!

When I connected to SYSTEM user on my Apex BD, I realised a lot of packages and functions on APEX_030200 user are invalid. I tried to compile, but unsuccefull. I think I should reinstall my Oracle DB, or just APEX.
Once again, can somebody help me?

Similar Messages

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

Also it was not and never has been jailbroken if that helps.

I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help?

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help

go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Import doesn't work anymore

I just installed the lastest version of Forte and now import doesn't work. I was importing my own class files located in the same directory as the main class. It work just fine before I upgraded.
Here's what import section used to look like:
import java.lang.Math;
import EDU.emporia.mathtools.*;
import LoadFileBox;
import SaveFileBox;
import InfoBox;
import ReportErrorBox;
import javax.swing.*;
import java.awt.*;
import java.io.*;
Here's the error message:
Java Code/Modeler.java [17:1] '.' expected
import LoadFileBox;
^
It says that for all the custom ones. After I do add a .* to all of them it gives:
Java Code/Modeler.java [17:1] package LoadFileBox does not exist
import LoadFileBox.*;
^
The files are there. They are named:
Modeler.java (the main class)
LoadFileBox.java
SaveFileBox.java
InfoBox.java
ReportErrorBox.java
They are all located in the same directory. I did try to compile the ones that don't import anything custom first and work my way up, but that failed.
Please help me, I hate Java with a passion but this damn assignment......

... and that helps because they have made importing classes that are in the default package (which is what you don't need to do in the first place) illegal.

I can sent photos from IPhoto with email. But if I try to sent the photos from the IPhoto application, it doesn't work. I receive the message : "Le serveur de messagerie n'a pas reconnu l'association de vos nom d'utilisateur et mot de passe". Help ?

I can sent photos from IPhoto with email. But if I try to sent the photos from the IPhoto application, it doesn't work. I receive the message : "Le serveur de messagerie n’a pas reconnu l’association de vos nom d’utilisateur et mot de passe". Help ?

iPhoto Menu -> Preferences -> Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

Applications tab doesn't work - apps won't sync

I'm starting to go a bit bonkers. It's been a while since I updated iTunes, and the Applications tab still doesn't work right. Is it just me? I can't click on anything/manipulate anything in that part of iTunes. And when I download new apps through the app store and tell my iPhone to sync, it doesn't sync the apps, even though "Sync Applications" under the Applications tab is checked.
I've uninstalled iTunes and reinstalled it. I've restored my iPhone. I've done both things a few times and you know what? Sometimes that makes it work. But if so, it only works one time. I can use the Applications window to check which apps I want synced and move things around onto different screens. But then if I click on another tab/navigate away from that window, it stops working. And I have to restore my iPhone again just to sync my apps.
Any suggestions? Help? Is it just me that's having this problem? Thanks...
iTunes version: 9.0.2 (25)
iPhone software version: 3.1.2

Wouldn't I lose all my paid apps if I go under a different account?
Still not working... only when I restore my iPhone to factory settings and reupload everything do I get my new and updated apps and have a working Applications tab. Then, if I quit iTunes and open it again later, I can't manipulate/change anything under the Applications tab, and my apps won't sync with the rest of the stuff on my iPhone. So maybe the solution is to leave iTunes open and my computer on FOREVER.
I'm seriously getting ticked that this isn't working right. Anyone else have this problem? Or just scuttlebutt and me?

Photo import doesn't work

I am using lightroom 4 and 5 on a Mac. Although preview of photos to be imported is shown I only get the message that the import could not be carried out (1) and the option to save the data as a :txt file. This was with Lightroom 4. It started first with being unabel to import directly from the camera, then I swithched to inserting the SD card directly into the laptop. This worked only after first downloading to the desktop. Later this didn't work either. I thought the program had become defect. Preview still worked and export is fine. I therefore updated to Lightroom 5 in the hope that this would solve the problem. However everything remains the same. Import still doesn't work with photos of any format. e.g. jpg or RAW.

Put your SD card into your card reader.
From the upper middle of the import dialog select Copy or Copy as DNG
From the upper right click on the drop down arrow and select Other Destination. Navigate to your desktop and create a new folder for your photos, then select the folder.
Try the import and see if this works. You can move the folder using Lightroom to wherever you want to keep it.
Your question about where is the destination folder indicates that you would greatly benefit from reading either Scott Kelby's or Martin Evening's book on Lightroom.

OK button on the sign in screen of Application Screen doesn't work

When I go to the App Store to add an app, it asks for my iTunes password. The OK button on this screen doesn't work. Everything works fine in other screens. The CANCEL button works but not the OK. What's up???? Any help would greatly be appreciated!!!

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened. The AnchorFree toolbar that you have is a version of the Ask toolbar.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Application Installer doesn't work!

My application installer does not work. I get these message: "Pc Suite does not support the connected phone".
I did all of these:
1. Disconnected the phone
2. Uninstalled Nokia PC Suite
3. Uninstalled the Nokia Connectivity Cable driver
4. Deleted the following folders:
C:\Documents and Settings%USERNAME%Application DataPC SuiteConfServer
C:\Documents and Settings%USERNAME%Application DataNokiaContentCopier
C:\Documents and Settings%USERNAME%Application DataNokiaPCSyncSynchData
C:\Documents and Settings%USERNAME%Application DataDatalayer
C:\Documents and Settings%USERNAME%Phone Browser (hidden folders)
5. I switched off the firewall and Re-installed Nokia PC Suite.
It still does not work. How can I ensolve it?
System: Windows XP professional with SP 3
Security: ESET Smart security
Pc Suite: 7.0.9.2
Phone Nokia: 6500 classic
Phone firmware: V 08.30
Connection type: USB with CA-101 cabel
Message Edited by sequoia on 24-Nov-2008 01:54 PM

I did all things you said, but it still does not work.
The error message is still the same: "Pc Suite does not support with the connected phone".
If I open the settings and select the 6500c (where you can change the destination of files), I couldn't change the directory of applications because it's folder icon is inactive(grey).
Any other idea how can I fix it?

Can't open jpg attachments. Options/Applications setting doesn't work.

jpeg attachments won't open in email. Window opens asking what to do and what pgm to use but once selected it just saves it to my download file anyway. I've updated FF Options/Applications but it made no difference.
== This happened ==
Every time Firefox opened
== Since I started using Firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Welcome to the discussions!
The fact that it worked, but it doesn't anymore means something has happened to interrupt this procedure.Remember if there was an update or something done that will explain it. As for the workaround I always saved as .RTF to avoid such troubles and it hasn't (yet) failed me.

Address book import, doesn't work at all

i am trying to import a tab-seperated value text file from outlook into address book, it recoginzes the fields, however, when i click ok, nothing happends.
nothing at all...
suggestions?

I, too, am having major issues with importing.
I have tried three different things:
1) a .vcf file (downloaded from my mail account on fastmail - fastmail.fm)
2) a CSV file (also downloaded from FastMail)
3) a Vcards file (exported after an import - more details further down in this message.
So, I select import, and the file doesn't really import, the button for import does NOTHING. But, there is a 'review duplicates', I use that, click on merge, click the apply to all check box, and then import works. It only takes a few seconds. I go from 206 addresses to 316. Yay! But, there's more. I close Address book, and I am back down to 206 cards - all my imports are GONE. I have done this at least a dozen times (in hope..). Once, I imported them all, then exported them to vcards hoping I could overwrite the 206 cards with the 316 that I exported. That hasn't worked either.
Address book seems unstable after importing, too. It sometimes won't close, I need to force quit it..
I checked out the console app looking for errors or clues, and nothing. I don't know if this import worked in tiger, tho..

Import doesn't work from compact flash card

Trying to import photos directly from memory card into LR. Tried 2 ways. First, using a memory card reader, LR did not react to the presence of the card in the reader, even though the reader showed as a drive in My Computer. Secondly, tried connecting directly from my camera (Nikon D200) --- a windows window came up asking how to handle images, but LR was not on the list, and the LR import function (window) did not pop up. Any ideas how to get the LR import pop up to pop? Thanks.

From reading the posts to this thread (and others), I tried a hunch and went to the LR directory on C: drive and found the executable for adobe downloader. I double-clicked on the .exe file, and "installed" this program. This placed the camera icon in the right taskbar, and then tried to download images from the same card into LR. As soon as I did that, LR's import photos dialog box popped up ... so it works now. Not sure why the adobe downloader did not get installed when I installed the LR program.
Another question now. I've got the properties of the downloader set that it will install itself in my right taskbar everytime I boot up. Is there any way to get the downloader initializes whenever I need up ... so that I don't have unnecessary things getting installed at boot? I see I can disable after it gets loaded at boot ... but would prefer to not have it install and then allow me to initialize when I am ready to use it.

DLL created with LV 7.1 Application Builder doesn,t work when analysis subVIs are present

I'm looking for a solution of the following problem.
The DLL created by the "sum1.vi" source works properly, while the DLL create by "sum2.vi" always gives a zero result.
The "sum2.vi" source contains an additional "Hanning Window" VI (not wired), that seems to be the cause of the problem.
If I delete the Hanning VI and re-build the DLL, the same works fine
Is there a solution or is it not possible to make Labview DLLs when containing analysis VIs as filters, windows, FFTs, and so on?
Thank you for your answers.
N. Roberto
Attachments:
sum1.vi ‏12 KB
sum2.vi ‏14 KB

Roberto N. wrote:
Thank you Jordan, I'm using Labview 7.1.
Anyway I've resolved the problem by adding the "lvanlys.dll" file (present in "..\Labview 7.1\resource\lvanlys.dll" path) as support file in the building process. Now the DLL containing the analysis functions works correctly.
Natalino Roberto
Ok, you probably got lucky since the lvanlys.dll seems to implement that function directly. However most Advanced Analysis functions are just redirected by lvanlys.dll to the Intel Math Kerneal Library that gets installed with LabVIEW 7.1 and higher. The only way to get that properly installed with your LabVIEW executable or DLL is to create a LabVIEW installer in your Application Builder and make sure to select under "Installer Settings->Advanced" the "LabVIEW Run-Time Engine" and the "Analyze VIs Support". Then use that installer to install your DLL on another computer.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

XML Import doesn't work...

After watching Sountrack Pro reset all my compresors on export, and runing the mix, I tried an xml export from Final Cut Pro. After a half an hour and two crash outs -NO GOOD.
It maybe was a Quicktime 7.2 error - who knows.
It opened the XML and it asked to set Logic at 48K and said I had 2 files that were 44.1K which I didn't. I said OK, and it started up and started converting two DV captures that were about 30 minutes each. (Both where 48k already)
Then I got an "out of memory message" and the converstions kept processing --( I have 5 gigs of main memory and was on a 700gig drive - yeah ok.)
I finally cliked OK on the out of memory warning and it gave me about 30 more in a row when I gave up and shut down the program.
I tried opeing it a different way, setting 48k myself, it never did anything but have the same fit.
I just had a WMV encoder give false data rate info from a Quicktime file, it was not Quicktime 7.2 compatable, they had an upgrade - so anyway - this is so fun... like dropping barbells on your foot.. Why mix when you can debug..
XML -- Good Luck!

Hi,
I've been trying to do some XML export. It does work fine even if in the import process with Logic it won't take into account the first audio channels. It does import music so far. So I need to check if I change the channel settings what goes on anyway.
We want to do a mix out of Final Cut Pro with a Tascam DM-4800. It won't work fine with soundtrack even if I didn't try yet the 2.02 version. I may try tomorrow anyway.
I'm going to make some new tries and let you know.

Workspace or Application Import doesn't work

Similar Messages

Maybe you are looking for