Workspace URL without port number?

Hello,
Is there a way to config the Workspace URL to not use the port number for LCES with Webpshere 6.1 environment (e.g." http://localhost:/workspace/" instead of "http://localhost:9080/workspace/") due to the firewall configuration?
Thanks,
Han Dao

1) Change the WC_defaulthost port of the appserver instance from 9080 to 80
2) Make sure "80" is listed as a "Host alias" for the "default_host" virtual host or another virtual host you have created exclusively for LiveCycle
3) Re-start the appserver instance
4) Check the SystemOut.log and verify that all LiveCycle web modules now bind to port 80, among others (like 5060, 5061 etc).
5) Try http://localhost/workspace and it should work.

Similar Messages

  • Could any one help how to open the application without port number in servl

    Could any one help how to open the application without port number in servlets or jsp?

    Well, configure the application server/web container to listen to the default http port of 80, rather than 8080.
    I couldnt get where to specify 80 instead of 8080 so that it opens without numbers

  • Getting WLS host url and port number

    Hello Experts,
    I need to forward an authenticated request to JAAS LoginModule. How can I get wls host name and port numbe in the LoginModule?
    Thank you in advance,
    Thanks for reading my post

    Hi friends.
    I have used the last post, but it is not working.
    Mat be the API had changed.
    What class or interface could give me this data in web dynpro component?
    Too, I'm using the SAP NetWeaver Developer Studio
    Version: 2.0.16
    Build id: 200602130353
    Thank you.
    Manuel Loayza
    Living La Vida JAVA
    Edited by: Manuel  Loayza Gahona on Jul 23, 2008 6:54 PM

  • Change portal URL and port number

    Hello experts,
    We are on  EP 7.0 which is running on Solaris 5.10 and Oracle 10g.
    Portal url is "http://hostname:50200/irj".
    But we want to users to logon portal using "http://intranet" link.
    How can we forwards portal default url to  a different URL and port such as "http://intranet".
    Steps should be followed in Visual Admin& Config Tool or  in the Solaris system , in the network part?

    The link pointed to how to change the default page of the Java engine to launch the portal. The example redirects to /irj/portal/anonymous - you just want to make it /irj/portal...
    Setting up SAP Web Dispatcher is covered in SDN quite well - search for SAP Web Dispatcher in the search aree on the right. Basically it takes about 5 minutes to setup.
    Cheers

  • How do setup the URL alias  without the port number 7001?

    Hi all,
    I am using Weblogic 8.1 and have the following url http://solutions.company.com:7001/application.
    I would like to simplify this URL by removing the port number to http://solutions.company.com/application.
    (ie., configuring the system such that it automatically looks at 7001 without
    the user typing it ). One of the ideas that i got was to use apache web server
    and redirect to the weblogic URL. But i would like to know if this can be done
    within weblogic?
    cheers
    -Jams

    Did you ever get an answer to this?? We are attempting to do the same thing.
    Tammy
    "JD" <[email protected]> wrote:
    >
    Hello All,
    I am looking for solution to the same problem, we would like to map
    http://www.company.com
    TO
    http://www.company.com:7001/application/first.jsp
    All help appreciated.
    Thanks
    Jay
    "Jams" <[email protected]> wrote:
    Hi all,
    I am using Weblogic 8.1 and have the following url http://solutions.company.com:7001/application.
    I would like to simplify this URL by removing the port number to http://solutions.company.com/application.
    (ie., configuring the system such that it automatically looks at 7001
    without
    the user typing it ). One of the ideas that i got was to use apacheweb
    server
    and redirect to the weblogic URL. But i would like to know if this can
    be done
    within weblogic?
    cheers
    -Jams

  • R12.1 url without the port number using dns

    Hi guys
    Thanks in advance,
    What are the steps to setup R12.1 using url with dns so that you don't have to specify the port number while connecting.
    Thanks again

    Hi,
    Please see this thread.
    How to setup webserver in R12 so as to enable users not to enter the port
    Re: How to setup webserver in R12 so as to enable users not to enter the port
    Regards,
    Hussein

  • Awesome Bar: auto-complete suggestion does not remember port number from URL

    I visit URLs with non-standard ports all the time such as http://localhost:8080.
    When I start typing "localhost" into the address bar, the Awesome Bar suggests only "http://localhost" - i.e. WITHOUT the port 8080 - instead of suggesting the full URL including the port.
    I never visit "localhost" without port 8080 so that entry should not even be in my history at all.
    The Awesome Bar should always remember port numbers when making suggestions.

    Unfortunately that doesn't work. Even with the URL bookmarked, typing "local" to begin the autocomplete still results in the URL being auto-completed without a port number.
    Typing the name of the bookmark itself results in no auto-complete at all, meaning you still have to press the down arrow before hitting "return" to get to the correct URL. So you're back at square one.
    I filed a bug here: https://bugzilla.mozilla.org/show_bug.cgi?id=853898
    Which turned out to be a duplicate of: https://bugzilla.mozilla.org/show_bug.cgi?id=764062

  • How to hide the PORT NUMBER from the URL

    Hi,
    We have Application on Node 1 and Database on Node 2
    Apps Version: 11.5.10.2
    DB: 9.2.0.6
    We recently added a new node to act as web server for iSupport.
    Now we are able to access the url using public Ip-address which looks like
    http://<Internet Ip-Address>:<PORT NUMBER>
    Eg: http://******.com:8000
    But we dont want the *'PORT NUMBER(8000)'* to be displayed.
    How to hide the port number ?..
    Thanks in Advance,
    Mahesh

    Hi Hsawwan,
    Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
    Regards,
    Mahesh

  • Hiding the port number from the url

    Hi All,
    In our applications built using Weblogic Portal 10.3, the url to access the application doesnt have the port number. It is simply like http://<server-name>/<context> no port at all. Is this some configuration that is available inside weblogic adminstration console? The domain has both the default port and the SSL port enabled which are running in 7001 and 7002 respectively. Please let me know as how to do this configuration as I am growing haywired on this it has been about a week and have not found an answer yet. Please throw some light on this and let me know if you need further details
    Thanks
    Ashwin

    you should install apache server to handle all the requests on port 80 and froward it to weblogic server using wlp plugin
    please check this link
    http://download.oracle.com/docs/cd/E13222_01/wls/docs81/plugins/apache.html
    any request http://yourapp/context will be mapped to http://youapp:7001/context

  • Port Number in HTTP Sender URL

    Hello,
    I am trying for a HTTP -> SAP PI 7.11 -> File scenario and now want to develop the URL which will be used by the HTTP client.
    I have the format of the URL to be used
    I want to ask which is the port that should be used in the URL:
    http://<hostname>:<port>/
    In some threads I saw that it should be 80<System_Number> (so if system number = 01 then port number becomes 8001); ABAP port, I assume.
    Is this still valid SAP PI 7.11?
    If yes can I check where this port is maintained (on SAP PI server)?
    ~Thanks.

    Hi,
    7.1 onwards both ports are same
    go to SMICM ->goto(services) -> http port will be listed there
    By default there is an http serive /sap/xi/adapter_plain provided for the HTTP ..so no need to create any addition objects for using http..
    HTH
    Rajesh
    Edited by: Rajesh on Feb 1, 2011 12:09 PM

  • Port number is changing in the URL!

    Hello,
    When i try to execute a webtemplate in the browser, the default port number(ICM profile configured in RZ10 icm/server_port_0 PROT=HTTP,PORT=8080,TIMEOUT=1800)is modifying in the URL to 8100, and unable to display the page. Again when i modify the port number to default portnumber manuall and the page/report is displayed.
    Could you explain why the default port no is modifying in the URL? How can i solve this porblem?
    Should i need to do some more configurations?
    Thanks...

    Hi Amie,
    It is difficult for me to understand the problem. Could you please provide more information about the version of the J2EE Engine you use, the environment - cluster, nodes. If it is possible to copy/paste the HTTP request and Http response. What is this default port number that you mention?
    Could you be so kind please to explain the problem once again in more details ?
    Best Regards,
    Todor

  • Port Number visible in Siebel URL

    Hi all,
    We have just finished deploying our Siebel Application in Production. It is a standard multi-server environment with Clustering and Load Balancing.
    However, we see that Siebel is automatically appending the Network Port Number (:8000), when accessing from an external Web Server.
    The client has requested this port number (:8000) be removed from the URL. We would really appreciate some help on the issue.

    You may have 2 constraints that are difficult to mix:
    1/ Any Browser consider an URL starting with http://server/path is to be send to port 80 of the "server"
    That is why all Web server (IIS, Apache, etc) use to be reached using port 80 by default.
    2/ Local security constraints
    One of those security guy may have told you that they can not accept to open the firewall or reverse-proxy to the port 80 of your virtual IP representing the web server farm
    Conclusion: Please have a discussion with your local security team and see if this has already been discussed.

  • How can I  change the port number generated in the returned url?

    We have a hardware load balancer listening on port 80 and forwarding requests to weblogic 6.1 sp2 servers on port 8090. The web servers generate urls containing the port number (and ip address of the load balancer). The browser tries to acces the load balancer at port 8090 and fails. So, how can I tell weblogic not to put a port number in the url?
    TIA, Reinier

    Generated WSDL will use the URL of the incoming
    HTTP GET request (request to retrieve wsdl) to create:
    service->port->location->address
    attribute inside the WSDL.
    This attribute is used by the client to send the SOAP
    request.
    So the HTTP GET request to retrieve the WSDL
    should use the address of the load balancer (ie 80).
    Then the generated WSDL will also have a url with
    port 80.
    http://manojc.com
    "reinier" <[email protected]> wrote in message
    news:3ea95116$[email protected]..
    We have a hardware load balancer listening on port 80 and forwardingrequests to weblogic 6.1 sp2 servers on port 8090. The web servers generate
    urls containing the port number (and ip address of the load balancer). The
    browser tries to acces the load balancer at port 8090 and fails. So, how can
    I tell weblogic not to put a port number in the url?
    TIA, Reinier

  • WAD-Port number is changing in the URL

    Hello,
    When i try to execute a webtemplate in the browser, the default port number(ICM profile configured in RZ10 icm/server_port_0 PROT=HTTP,PORT=8080,TIMEOUT=1800)is modifying in the URL to 8100, and unable to display the page. Again when i modify the port number to default portnumber manuall and the page/report is displayed.
    Could you explain why the default port no is modifying in the URL? How can i solve this porblem?
    Thanks
    Ravi

    One way to check is using Transaction<b> SMICM</b>. You can also try SE37 > RSBB_URL_PREFIX_GET. When you execute this function module, the Export parameters returned are what appear in your URL.
    If there is a difference between what you see in SMICM and the Export Parameters, it means that somewhere the settings are wrong...your Basis team can help in that case.
    Hope this helps...

  • Port number pops up in URL...

              Hi,
              I have this issue.
              We have weblogic Server(5.0) running on HP-Unix. We have several
              JSP Pages and a controller servlet.
              The testing goes like this:
              We have a form in my.jsp and it gets submitted to controller servlet.
              The servlet processes the request and redirects the response to
              myResult.jsp.
              We give the URL like : http://rv1/my.jsp
              With IE(5.0) everything works fine.
              We get the redirected JSP Page and URL in IE looks like : http:/rv1/myResult.jsp
              When I use Netscape(4.85) my response url has port nmumber appended
              to the m/c name.
              For ex; if I give http://rv1/my.jsp I get the response page as
              http://rv1:80/myResult.jsp
              When I tested with the local installation of WebLogic on my Windows
              NT, both IE and Netscape work fine.
              So we concluded that it is neither browser issue nor our application
              issue.
              Is it a WebLogic issue specific to HP-Unix?
              Please Help
              Thanks,
              Kanchan
              

              For the JSPs and Servlets running on the same application server
              and in the same application context, we usually use forward or
              include of requestdispatcher or <jsp:forward> and <jsp:include>.
              On the other hand, you can write some programs to simulate Netscape
              to access your application and check if port 80 is in the header
              field Loaction. If so, port number is appended by Weblogic. Else,
              port number is appended by your browser.
              "Kanchan" <[email protected]> wrote:
              >
              >Hi,
              >I have this issue.
              >We have weblogic Server(5.0) running on HP-Unix. We have
              >several
              >JSP Pages and a controller servlet.
              >The testing goes like this:
              >We have a form in my.jsp and it gets submitted to controller
              >servlet.
              >The servlet processes the request and redirects the response
              >to
              >myResult.jsp.
              >We give the URL like : http://rv1/my.jsp
              >With IE(5.0) everything works fine.
              >We get the redirected JSP Page and URL in IE looks like
              >: http:/rv1/myResult.jsp
              >
              >When I use Netscape(4.85) my response url has port nmumber
              >appended
              >to the m/c name.
              >For ex; if I give http://rv1/my.jsp I get the response
              >page as
              >http://rv1:80/myResult.jsp
              >
              >When I tested with the local installation of WebLogic
              >on my Windows
              >NT, both IE and Netscape work fine.
              >
              >So we concluded that it is neither browser issue nor our
              >application
              >issue.
              >
              >Is it a WebLogic issue specific to HP-Unix?
              >Please Help
              >
              >Thanks,
              > Kanchan
              >
              

Maybe you are looking for

  • Using iTunes 10.6 i am unable to access the iTunes store

    Since I installed iTunes 10.6 on my Win XP PC, I am no longer able to access the iTunes Store, sinc my iPod Touch, or view My Account.

  • HT4623 how to enable my iphone 5

    Hello, My kids were playing around with my phone and someone it became disabled. Please help

  • Can not create planning function types (for process empty records)

    Hi! SAP Experts,      I want to copy 0RSPL_FORMULA to another function types for processing empty records, ZRSPL_FORMULA. I checked this function type via RSPLAN, there is no error!.   But when i try to use it in planning modeler. We found the error

  • How to call CJ2ON transaction

    Hi All, How to call CJ20N transaction from custom transaction/custom program. generally some transaction having OPEN functionality for open other project,how to handle these type of transaction. Help me. Thanks, Srinivas Manai

  • Alternative for describe

    Will u please tell, what are the alternative commands for "Describe" command in sql(defining the structure of the table) .