Write.vi error

Question

In the attached VI, I am getting the following error
Error -200547 occurred at DAQmx Write (Analog Wfm 1Chan NSamp).vi
Possible reason(s):
Measurements: DAQmx Write failed, because a previous DAQmx Write automatically configured the output buffer size. The buffer size is equal to the original number of samples written per channel, so no more data can be written prior to starting the task.
Start the generation before the second DAQmx Write, or set Auto Start to true in all occurences of DAQmx Write. To incrementally write into the buffer prior to starting the task, call DAQmx Configure Output Buffer before the first DAQmx Write.
Task Name: _unnamedTask<9>.
In this the physical channel is a simulated device PCI-6251.
How can I rectify this error ??
Attachments:
signal_ramp.vi ‏231 KB

Answer 1

Error -200288 occurred at DAQmx Write (Analog Wfm 1Chan NSamp).vi
Possible reason(s):
Measurements: Attempted to write a sample beyond the final sample generated. The generation has stopped, therefore the sample specified by the combination of position and offset will never be available.
Specify a position and offset which selects a sample up to, but not beyond, the final sample generated. The final sample generated can be determined by querying the total samples generated after a generation has stopped.
Attempted to Write Sample: 250000
Property: RelativeTo
Corresponding Value: Current Write Position
Property: Offset
Corresponding Value: 0
Task Name: _unnamedTask<58>