Writing defaults to inf file
I want to programatically change some default control values. Searching the forums tells me that the invoke node won't handle changing defaults on a running vi. It looks like using an .inf file will be the best method. I've used this before for storing some path information.
The examples available for writing and reading to .inf shows string, number and boolean. My question is though, how do I store and retrieve the values in the control, attached (LV8.0)? Particularly the Trigger slope and trigger source controls.
~~~~~~~~~~~~~~~~~~~~
Paul Johnson
Renco Encoders, Inc
Goleta, CA
~~~~~~~~~~~~~~~~~~~~
Attachments:
Aquisistion Control LV8.0.ctl 13 KB
Its another "Never Mind". I figured it out.
~~~~~~~~~~~~~~~~~~~~
Paul Johnson
Renco Encoders, Inc
Goleta, CA
~~~~~~~~~~~~~~~~~~~~
Similar Messages
-
Error in Windows 8 default Broadcom netb57vx.inf file?
Hello all,
We are trying and failing to install Windows 8 32bit enterprise on some older machines that use a Broadcom b5786 NIC. Hardware Id PCI\VEN_14e4&DEV_169A&SUBSYS_101f17AA. We can install Windows 8 from a USB stick and Windows
finds the NIC and tries to load the default driver which fails with the error "A service installation section in this inf is invalid".
I can manually load the Windows XP version of the driver ok and this would be ok except that the Windows 8 boot.wim file has the same problem (same files) and I am unable to get the XP driver to load which means we cannot use WDS for
deployment and support.
I have tried removing the offending file(s) from the boot.wim file and installing the XP version of the driver which gets me closer but when booting it is unable to locate the dhcp server.
Any help would be much appreciated.
Many thanks in advance.
Regards
GraemeI think I've got it. There was no file copy command in the section of the inf below. The drivers downloaded from Broadcom and the netb57vx.inf file were missing the CopyFiles line in:
[BCM5787A1eStar_LHinst.NTx86.6.1]
Characteristics = 0x84 ; NCF_HAS_UI | NCF_PHYSICAL
AddReg = LH_AddReg, Intr_coal, BCM5750.Params, ParamsNt, ParamsNT8021p, ParamsNtW9x, ParamsC, ParamsWOLeStar, ParamsWireSpeed, ParamsLgSnd, ParamsPM
CopyFiles = CopyFile_Binary
BusType = 5
*IfType = 6 ; IF_TYPE_ETHERNET_CSMACD
*MediaType = 0 ; NdisMedium802_3
*PhysicalMediaType = 0 ; NdisPhysicalMediumUnspecified
AddReg = ParamsNtv6Tx, ParamsGSOv4
Adding the CopyFies line so the section looked like above got the later drivers to install in Windows 8 but didn't work in the boot.wim file as the driver files are in a different place. I updated the netb57vx.inf file in the Windows\inf directory
but maybe should have updated the one in windows\system32\driverstore\filerepository. I mounted the boot.wim file and copied the driver files (b57nd60x.sys & b57nd60x.cat) into the Windows\System32\drivers folder , committed the changes and
got network connectivity with WDS and PXE.
Hope this helps others.
Regards
Graeme -
Hi
I've successfully read from INF file by the following code :
public String Read_INI(String Path , String Attribute)
Properties p = new Properties();
try
p.load(new FileInputStream(Path));
catch (Exception e)
System.out.println(e);
return p.getProperty(Attribute);
}Now I'm facing a problem in writing in INF file
i used this code but it doesn't work!
public void Write_INI(String Value, String Attribute, String Path)
Properties p = new Properties();
try
p.load(new FileInputStream(Path));
p.setProperty(Attribute, Value);
catch (Exception e)
System.out.println(e);
}any ideas ?thnx very much :)
just i added :
p.store(new FileOutputStream(Path), Value);after :
p.setProperty(Attribute, Value); -
A question about CPS (CPS processing) and CAPolicy.inf file.
Hello All
Can someone please help me with the following question.
Background, I am building a 3-tier PKI infrastructure. offline Root, offline Policy (intermediate), online issuing.
Now my first question is about CPS (certificate practice statement) for this example lets just call this the InternalIssuancePolicy as below.
Basically I was thinking it is best not to set a given certificate (aka issuance) policy at the Root, the reason being I may wish to have different issuance policies at a latter date.
For example right now I just want an issuance policy (CPS) for internal certificates only, therefore I am thinking set this at the Policy CA level, as below [InternalIssuancePolicy] (example OID) and then issuing CA certs from this Policy CA to the
internal issuing CAs. If at a latter date I want a different policy (CPS) for issuance of external certificates I can build a new Policy CA under the existing Root with a different policy extension.
Is the above logic sound?
Questions:
I am assuming from recent study that the CA cert issued to the Issuing CA will contain a single issuance policy "only" i.e. the one that was specified in the Policy CA 1.3.6.1.4.11111111.1.1.1. If so I believe you cannot build a new
issuing CA and submit the CSR to the Policy CA asking for a CA cert with any other certificate policy extension other than 1.3.6.1.4.11111111.1.1.1
Is that correct?
Also
I saw a blog post which stated if are going to use certificate/issuance policies (other than all issuance policies) you should mark the extension as critical=true otherwise the policy just becomes glorified comment. I take the point but that leads me to
two more questions
1: How does the certificate changing engine or CryptoAPI enforce a certificate policy (as it is just a policy, e.g. written procedure). I am assuming all this means is it forces the client to process the extension and therefore check the certificate
policy extension in the certificate does not violate the certificate chain but that is all it can do?
2: If the certificate policy extension is set to critical and the URL referenced in the extension is not available (e.g. on a WEB Server and the client is working offline, but has a cached CRL), does setting the extension to critical also force the
client to try and access the URL listed, or not (I am assuming not as you could just have a text block rather than URL).
Any comments suggestions on my proposed three CAPolicy.inf files below for the 3-tier PKI (again offline Root and Policy)
** Root **
[Version]
Signature= "$Windows NT$"
[Certsrv_Server]
RenewalKeyLength=4096
RenewalValidityPeriodUnits=Years
RenewalValidityPeriod=20
CRLPeriod=Years
CRLPeriodUnits=1
LoadDefaultTemplates=False
AlternateSignatureAlgorithm=0
[CRLDistributionPoint]
[AuthorityInformationAccess]
basicconstraintsextension]
pathlength = 2
critical=true
PolicyStatementExtension]
Policies = AllIssuancePolicy
Critical = FALSE
[AllIssuancePolicy]
OID = 2.5.29.32.0
** Policy CA **
[Version]
Signature= "$Windows NT$"
[Certsrv_Server]
RenewalKeyLength=2048
RenewalValidityPeriodUnits=Years
RenewalValidityPeriod=10
CRLPeriod=Years
CRLPeriodUnits=1
[PolicyStatementExtension]
Policies = InternalIssuancePolicy
Critical = False
[InternalIssuancePolicy]
OID = 1.3.6.1.4.11111111.1.1.1
Notice = "Internal Certificate Policy"
URL="http://pki.lab.local/Certenroll/CPS.txt"
[AuthorityInformationAccess]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crt
[CRLDistributionPoint]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crl
[basicconstraintsextension]
pathlength = 1
critical=true
** Issuing CA **
[Version]
Signature= "$Windows NT$"
[Certsrv_Server]
RenewalKeyLength=2048
RenewalValidityPeriodUnits=Years
RenewalValidityPeriod=5
CRLPeriod=Weeks
CRLPeriodUnits=1
CRLDeltaPeriod=Days
CRLDeltaPeriodUnits=1
LoadDefaultTemplates=False
AlternateSignatureAlgorithm=0
[AuthorityInformationAccess]
URL=http://pki.lab.local/Certenroll/IssuingCA01.crt
[CRLDistributionPoint]
URL=http://pki.lab.local/Certenroll/IssuingCA01.crl
[basicconstraintsextension]
pathlength = 0
critical=true
Thanks All
AAnotherUser__> Is the above logic sound?
not that much. In this case 3-tier PKI could be reduced to 2-tier. Make default Offline Root CA and below it issuing CAs with desired policy OIDs. You will combine issuing CA with policy CA functionality. Additional tier will cost you a license, administration
overhead and increased certificate chain processing delays. There is nothing wrong if you combine policy CAs with issuing.
> I saw a blog post which stated if are going to use certificate/issuance policies (other than all issuance policies) you should mark the extension as critical=true
where did you get this? Certificate policies should not be marked critical. Certificate chaining engine will take care of it, when application reqests CCE to validate desired policy.
> does setting the extension to critical also force the client to try and access the URL listed
no. Certificate chaining engine do not inspect policy qualifier URLs.
> Any comments suggestions on my proposed three CAPolicy.inf files below for the 3-tier PKI (again offline Root and Policy)
[CRLDistributionPoint]
[AuthorityInformationAccess]
[PolicyStatementExtension]
Policies = AllIssuancePolicy
Critical = FALSE
[AllIssuancePolicy]
OID = 2.5.29.32.0
these sections are not required in root CA.
[AuthorityInformationAccess]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crt
[CRLDistributionPoint]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crl
[basicconstraintsextension]
pathlength = 1
critical=true
These sections are not required at policy CA. Afaik, CDP and AIA extensions are not supported in non-root CA configuration files. The same is with issuing CA. And your issuing CA is missing PolicyStatementExtension section.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
How do I uninstall the .inf file (for USB)
I read here how to create and install an .inf file:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Before I start... How do I uninstall it if required?Hey Viking,
If you installed a driver for the device then all you have to do is uninstall the driver. For example if I wanted to use a DAQPad I would just uninstall NI-DAQ.
However, Windows ships with drivers for several USB devices. In this case you have a few options. After creating your .inf file and installing it you can go to the device manager and click update driver for the device and then manually select the .inf file you created instead of the default one that windows uses.
You could also search the inf files on your computer (normally at C:\Windows\inf) for a file that contains your specific vendor and device ID. Then comment out the line that references your device.
I hope this helps out.
JoshuaP
National Instruments -
Question on CAPolicy.inf file and post-installation script
I'm preparing a small PKI implementation with a single Enterprise Root CA on Windows 2008 R2 Enterprise.
The primary role of this CA is to provide certificates for about 20 laptops that will use the certificates for authentication to a wireless network.
I have prepared a CAPolicy.inf file and a post installation script (below).
Renewal period for the root cert should be 10 years, CRL publication every 2 days with Delta publication every 12 hours (details in scripts below).
I want to make sure the AIA and CRL url commands are correct.
Does this look correct?
AIA
1:%WINDIR%\System32\CertSrv\CertEnroll\%%1_%%3%%4.crt
This should publish the CA certificate to the local file system "certenroll".
2:ldap:///CN=%%7,CN=AIA,CN=Public Key Services,CN=Services,%%6%%11
This places the LDAP url in the AIA extension of issued certs.
I am not planning to use HTTP, hence its absence.
CRL
1:%WINDIR%\System32\CertSrv\CertEnroll\%%3%%8%%9.crl
This publishes the CRL to the local file system ("certenroll" subfolder).
10:ldap:///CN=%%7%%8,CN=%%2,CN=CDP,CN=Public Key Services,CN=Services,%%6%%10
Indicates CDP in AD DS and includes CDP url in issued certificates.
Complete scripts
1. CAPolicy.inf - %windir%
[Version]
Signature= "$Windows NT$"
[certsrv_server]
renewalkeylength=2048
RenewalValidityPeriodUnits=10
RenewalValidityPeriod=years
CRLPeriod = days
CRLPeriodUnits = 2
CRLDeltaPeriod = hours
CRLDeltaPeriodUnits = 12
LoadDefaultTemplates=0
2. Install Role
Follow steps in GUI here
3. Run post-install script
certutil -setreg CA\DSConfigDN CN=Configuration,DC=mydomain,DC=local
certutil -setreg CA\CRLPeriodUnits 2
certutil -setreg CA\CRLPeriod "days"
certutil -setreg CA\CRLDeltaPeriodUnits 12
certutil -setreg CA\CRLDeltaPeriod "hours"
certutil -setreg CA\ValidityPeriodUnits 10
certutil -setreg CA\ValidityPeriod "Years"
certutil –setreg CA\CACertPublicationURLs "1:%WINDIR%\System32\CertSrv\CertEnroll\%%1_%%3%%4.crt\n2:ldap:///CN=%%7,CN=AIA,CN=Public Key Services,CN=Services,%%6%%11"
certutil –setreg CA\CRLPublicationURLs "1:%WINDIR%\System32\CertSrv\CertEnroll\%%3%%8%%9.crl\n10:ldap:///CN=%%7%%8,CN=%%2,CN=CDP,CN=Public Key Services,CN=Services,%%6%%10"
certutil -setreg CA\csp\DiscreteSignatureAlgorithm 1
certutil -setreg CA\AuditFilter 127
net stop certsvc & net start certsvc
certutil -crl
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.A couple of things (just a quick glance)
1) CAPolicy.inf
Everything looks fine in this file. You will have a 2 day base crl and 12 hour delta CRLs. No default templates are loaded, so you must manually designate all published certificates
2) Post install Script
a. Best practices are to use HTTP only, not to use LDAP, so your whole design does not follow best practices. Furthermore, if you issue a certificate to a single, non-domain joined machine, they will be unable to evaluate your certificates. If you decide
to do VPN (or use an internal SSL cert on an externally accessible Web server), revocation checking will fail because you do not publish AD to the external world
b. Will you be issuing 10 year certificates from the CA. These lines:
certutil -setreg CA\ValidityPeriodUnits 10
certutil -setreg CA\ValidityPeriod "Years"
define the maximum validity period of certs issued *by* the CA. For example, if a certificate template states 4 years, then a four year will be issued (less than 10 years). If a template state 12 years, then the max age will be 10 years. Think of it as a
governor.
c.CACertPublicationURLs . This should include an HTTP URL, and if you want to still include LDAP, HTTP should be prior to the LDAP URL.
d. CRLPublicationURLs. This should include an HTTP URL. If you want to still include LDAP, HTTP should be prior to the LDAP URL. Your checkbox value for the LDAP URL is incorrect as well. For a CA that issues both base and delta CRLs, you must have a value
of 79 (all check boxes enabled). Your current configuration would fail for revocation checking because you do not publish the base or delta CRL to AD. There is another check box missing (I believe the one to include the URL in the base CRL's freshest CRL extension
(how to find the delta CRL).
e. Do not include the DiscreteSignatureAlgorithm line in the script. If you have any Windows XP clients, they will not be able to use the certs (BTW, this should have been AlternateSignatureAlgorithm in my book - where you sourced your scripts). This would
only be used on a CA where you used something like Elliptical Curve as the assymetric algorithm and SHA384 as the signature algorithm).
f. The restart line should be net stop certsvc && net start certsvc. The double && ensures that the service comes to a complete stop before the start command is executed.
HTH,
Brian -
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
Writing to a flat file using UTL in a procedure
Hello All,
I am creating a procedure in which I am trying to write data to a flat file using UTL. Code is shown below:
CREATE OR REPLACE PROCEDURE wrt_lifungduty IS
sql_stmt varchar2(200);
sql_stmt1 varchar2(200);
sql_stmt2 varchar2(200);
v_cur_hdl integer;
v_rows_processed BINARY_INTEGER;
V_file UTL_FILE.FILE_TYPE;
V_flatfile_line VARCHAR2(98) := NULL;
V_OBLIGATION_KEY NUMBER(10);
V_OBLIGATION_LEVEL VARCHAR2(6);
V_KEY_VALUE_1 VARCHAR2(20);
V_KEY_VALUE_2 VARCHAR2(20);
V_PARTNER_TYPE VARCHAR2(6);
V_PARTNER_ID VARCHAR2(10);
V_EXT_INVC_NO VARCHAR2(30);
V_EXT_INVC_DATE DATE;
V_PAID_DATE DATE;
V_PAID_AMT NUMBER(20,4);
V_COMP_ID VARCHAR2(10);
V_RECEIPT_DATE DATE;
V_ORDER_QTY NUMBER(12,4);
V_RECEIPT_QTY NUMBER(12,4);
V_FRT NUMBER;
V_DUTY NUMBER;
V_SUPPLIER NUMBER;
V_FLAG VARCHAR2(1);
V_ELC_COST NUMBER;
V_ADJ_ELC NUMBER;
Cursor x is
select OBLIGATION_KEY,OBLIGATION_LEVEL,KEY_VALUE_1,KEY_VALUE_2,PARTNER_TYPE,PARTNER_ID,EXT_INVC_NO,EXT_INVC_DATE
,PAID_DATE,PAID_AMT,COMP_ID,RECEIPT_DATE,ORDER_QTY,RECEIPT_QTY,FRT,DUTY,SUPPLIER,FLAG,ELC_COST,ADJ_ELC
from RMSBIZ.CT_ANALYZE_LIFUNG_DUTY;
BEGIN
if not UTL_FILE.IS_OPEN(V_file) then
V_file := UTL_FILE.FOPEN('/exchange/biz/rms2lan','sb_duty.dat','w'); --need to give the location for testing
end if;
for x1 in x loop
V_OBLIGATION_KEY :=1;
V_OBLIGATION_LEVEL :='test';
V_OBLIGATION_KEY :=x1.OBLIGATION_KEY;
V_OBLIGATION_LEVEL :=x1.OBLIGATION_LEVEL;
V_KEY_VALUE_1 :=x1.KEY_VALUE_1;
V_KEY_VALUE_2 :=x1.KEY_VALUE_2;
V_PARTNER_TYPE :=x1.PARTNER_TYPE;
V_PARTNER_ID :=x1.PARTNER_ID;
V_EXT_INVC_NO :=x1.EXT_INVC_NO;
V_EXT_INVC_DATE :=x1.EXT_INVC_DATE;
V_PAID_DATE :=x1.PAID_DATE;
V_PAID_AMT :=x1.PAID_AMT;
V_COMP_ID :=x1.COMP_ID;
V_RECEIPT_DATE :=x1.RECEIPT_DATE;
V_ORDER_QTY :=x1.ORDER_QTY;
V_RECEIPT_QTY :=x1.RECEIPT_QTY;
V_FRT :=x1.FRT;
V_DUTY :=x1.DUTY;
V_SUPPLIER :=x1.SUPPLIER;
V_FLAG :=x1.FLAG;
V_ELC_COST :=x1.ELC_COST;
V_ADJ_ELC :=x1.ADJ_ELC;
V_flatfile_line:= V_OBLIGATION_KEY||','||
V_OBLIGATION_LEVEL ||','||
V_KEY_VALUE_1 ||','||
V_KEY_VALUE_2 ||','||
V_PARTNER_TYPE ||','||
V_PARTNER_ID ||','||
V_EXT_INVC_NO ||','||
V_EXT_INVC_DATE ||','||
V_PAID_DATE ||','||
V_PAID_AMT ||','||
V_COMP_ID ||','||
V_RECEIPT_DATE ||','||
V_ORDER_QTY ||','||
V_RECEIPT_QTY ||','||
V_FRT ||','||
V_DUTY ||','||
V_SUPPLIER ||','||
V_FLAG ||','||
V_ELC_COST ||','||
V_ADJ_ELC;
V_flatfile_line:= V_OBLIGATION_KEY||','|| V_OBLIGATION_LEVEL;
UTL_FILE.PUT_LINE(V_file, V_flatfile_line);
end loop
commit;
UTL_FILE.fclose(V_file);
END;
Getting the following errors:
SQL>Welcome-->
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "SYS.UTL_FILE", line 98
ORA-06512: at "SYS.UTL_FILE", line 157
ORA-06512: at "RMSBIZ.WRT_LIFUNGDUTY", line 39
ORA-06512: at line 1
SQL>Welcome-->39
39* V_file := UTL_FILE.FOPEN('/exchange/biz/rms2lan','sb_duty.dat','w');
SQL>Welcome-->
Does any one know why it is erroring out?
Thanks,
Chiruthe code below works if i take out the last 3 columns while writing to the flat file line.
CREATE OR REPLACE PROCEDURE wrt_lifungduty IS
sql_stmt varchar2(200);
sql_stmt1 varchar2(200);
sql_stmt2 varchar2(200);
v_cur_hdl integer;
v_rows_processed BINARY_INTEGER;
V_file UTL_FILE.FILE_TYPE;
V_flatfile_line VARCHAR2(98) := NULL;
V_OBLIGATION_KEY NUMBER(10);
V_OBLIGATION_LEVEL VARCHAR2(6);
V_KEY_VALUE_1 VARCHAR2(20);
V_KEY_VALUE_2 VARCHAR2(20);
V_PARTNER_TYPE VARCHAR2(6);
V_PARTNER_ID VARCHAR2(10);
V_EXT_INVC_NO VARCHAR2(30);
V_EXT_INVC_DATE DATE;
V_PAID_DATE DATE;
V_PAID_AMT NUMBER(20,4);
V_COMP_ID VARCHAR2(10);
V_RECEIPT_DATE DATE;
V_ORDER_QTY NUMBER(12,4);
V_RECEIPT_QTY NUMBER(12,4);
V_FRT NUMBER;
V_DUTY NUMBER;
V_SUPPLIER NUMBER;
V_FLAG VARCHAR2(1);
V_ELC_COST VARCHAR2(20);
V_ADJ_ELC VARCHAR2(20);
Cursor x is
select OBLIGATION_KEY,OBLIGATION_LEVEL,KEY_VALUE_1,KEY_VALUE_2,PARTNER_TYPE,PARTNER_ID,EXT_INVC_NO,EXT_INVC_DATE
,PAID_DATE,PAID_AMT,COMP_ID,RECEIPT_DATE,ORDER_QTY,RECEIPT_QTY,FRT,DUTY,SUPPLIER,FLAG,ELC_COST,ADJ_ELC
from RMSBIZ.CT_ANALYZE_LIFUNG_DUTY;
BEGIN
if not UTL_FILE.IS_OPEN(V_file) then
V_file := UTL_FILE.FOPEN('/rmsapps/rms803/biz/data/utl_files','sb_duty.csv','w'); --need to give the location for testing
end if;
for x1 in x loop
V_OBLIGATION_KEY :=nvl(x1.OBLIGATION_KEY,null);
V_OBLIGATION_LEVEL :=nvl(x1.OBLIGATION_LEVEL,null);
V_KEY_VALUE_1 :=x1.KEY_VALUE_1;
V_KEY_VALUE_2 :=x1.KEY_VALUE_2;
V_PARTNER_TYPE :=x1.PARTNER_TYPE;
V_PARTNER_ID :=x1.PARTNER_ID;
V_EXT_INVC_NO :=x1.EXT_INVC_NO;
V_EXT_INVC_DATE :=x1.EXT_INVC_DATE;
V_PAID_DATE :=x1.PAID_DATE;
V_PAID_AMT :=x1.PAID_AMT;
V_COMP_ID :=x1.COMP_ID;
V_RECEIPT_DATE :=x1.RECEIPT_DATE;
V_ORDER_QTY :=x1.ORDER_QTY;
V_RECEIPT_QTY :=x1.RECEIPT_QTY;
V_FRT :=x1.FRT;
V_DUTY :=x1.DUTY;
V_SUPPLIER :=x1.SUPPLIER;
V_FLAG :=nvl(x1.FLAG,'0');
V_ELC_COST :=to_char(nvl(x1.ELC_COST,0));
V_ADJ_ELC :=to_char(nvl(x1.ADJ_ELC,0));
V_flatfile_line:= V_OBLIGATION_KEY||','||
V_OBLIGATION_LEVEL ||','||
V_KEY_VALUE_1 ||','||
V_KEY_VALUE_2 ||','||
V_PARTNER_TYPE ||','||
V_PARTNER_ID ||','||
V_EXT_INVC_NO ||','||
V_EXT_INVC_DATE ||','||
V_PAID_DATE ||','||
V_PAID_AMT ||','||
V_COMP_ID ||','||
V_RECEIPT_DATE ||','||
V_ORDER_QTY ||','||
V_RECEIPT_QTY ||','||
V_FRT ||','||
V_DUTY ||','||
V_SUPPLIER ||','||
-- V_FLAG ||','||
V_ELC_COST ||','||
V_ADJ_ELC;
UTL_FILE.PUT_LINE(V_file, V_flatfile_line);
end loop
commit;
UTL_FILE.fclose(V_file);
EXCEPTION
WHEN UTL_FILE.INVALID_PATH
THEN
DBMS_OUTPUT.PUT_LINE ('error: INVALID_PATH');
WHEN UTL_FILE.INVALID_MODE
THEN
DBMS_OUTPUT.PUT_LINE ('error: INVALID_MODE');
WHEN UTL_FILE.INVALID_FILEHANDLE
THEN
DBMS_OUTPUT.PUT_LINE ('error: INVALID_FILEHANDLE');
WHEN UTL_FILE.INVALID_OPERATION
THEN
DBMS_OUTPUT.PUT_LINE ('error: INVALID_OPERATION');
WHEN UTL_FILE.READ_ERROR
THEN
DBMS_OUTPUT.PUT_LINE ('error: READ_ERROR');
WHEN UTL_FILE.WRITE_ERROR
THEN
DBMS_OUTPUT.PUT_LINE ('error: WRITE_ERROR');
WHEN UTL_FILE.INTERNAL_ERROR
THEN
DBMS_OUTPUT.PUT_LINE ('error: INTERNAL_ERROR');
WHEN OTHERS THEN
-- v_error_code := SQLCODE;
-- v_error_message := SQLERRM;
-- dbms_output.put_line('ERROR: '||v_error_code);
-- dbms_output.put_line('ERROR: '||v_error_message);
RAISE_APPLICATION_ERROR(-20003,'sbduty - aborted');
END;
/It fails as soon as it encounters the V_FLAG in the V_flat_file_line. The data in the table has nulls for the FLAG, and some -ve numbers for the ELC_COST,ADJ_ELC..but that should'nt cause any problems does it?
Whats wrong with those 3 columns?
Errors that i get are:
SQL>Welcome-->BEGIN wrt_lifungduty; END;
ERROR at line 1:
ORA-20003: sbduty - aborted
ORA-06512: at "RMSBIZ.WRT_LIFUNGDUTY", line 117
ORA-06512: at line 1
SQL>Welcome-->117
117* RAISE_APPLICATION_ERROR(-20003,'sbduty - aborted');
SQL>Welcome-->
Thanks,
Chiru -
Problem in reading no. of files and writing into a single file
Hi,
Iam with Problem in reading no. of files and writing into a single file....
Iam reading no. of files stored in local directory.......
Iam able to read and print the data in files successfully....but while writing..only first file is being written...and the next files are not written in my output file...
plz tell me my mistake....I hope Iam doing some mistake while writing into file...PLz help.....
Basically my code structure is like this....
import java.io.*;
import java.util.regex.*;
import java.util.*;
import java.text.*;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hssf.usermodel.HSSFWorkbook;
import org.apache.poi.hssf.usermodel.HSSFSheet;
import org.apache.poi.hssf.usermodel.HSSFRow;
import org.apache.poi.hssf.usermodel.HSSFCell;
class Writing {
public static void main(String args[]) throws Exception {
FileOutputStream fileOut = new FileOutputStream("ServerResult.xls"); //my output file
int counter = 1;
File dir = new File("C:/Perform/ServerLogs");
String[] children = dir.list();
if( children == null)
System.out.println("The Directory mentioned does not exist");
else {
for (int fileNo = 0; fileNo < children.length; fileNo++ ) { //Files iteration starts
String filename = children[fileNo];
File logFile = new File(filename);
FileReader logFileReader = new FileReader(logFile);
BufferedReader logReader = new BufferedReader(logFileReader);
StringBuffer sBuf = new StringBuffer(5000);
HSSFWorkbook wb = new HSSFWorkbook();
HSSFSheet sheet = wb.createSheet();
HSSFRow rowTitle;
HSSFRow rowReq;
HSSFRow rowRes;
String aLine = null;
boolean skip = false;
boolean readed = false;
boolean initReq = false;
boolean flag = false;
long requestTime = 0;
long responseTime = 0;
long recdTime = 0;
long sentTime = 0;
long hasTime = 0;
long presentTime = 0;
int hasCalls = 0;
Pattern startMessage = Pattern.compile("^<MESSAGE.*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern requestMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<ActName>(.*)</ActName>.*", Pattern.DOTALL);
Pattern requestMessage1 = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<Svc id=\"(.*)\">.*", Pattern.DOTALL);
Pattern responseMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"HostConnInit\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initResMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*", Pattern.DOTALL);
Pattern initResIDMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*<IATA>"+args[0]+"</IATA>.*", Pattern.DOTALL);
Pattern sentMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgSentInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern rcvdMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgRcvdInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss.SSS");
DecimalFormat dcf = new DecimalFormat("########.##");
String actName = "";
if (fileNo ==0)
rowTitle = sheet.createRow((short)0);
rowTitle.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)0).setCellValue("Req/Res");
rowTitle.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)1).setCellValue("Action");
rowTitle.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)2).setCellValue("Server Time(in ms)");
rowTitle.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)3).setCellValue("Request Vs Response Time in Server(in ms)");
rowTitle.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)4).setCellValue("Time Taken By HAS/HOST(in ms)");
rowTitle.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)5).setCellValue("No. of HAS calls");
rowTitle.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)6).setCellValue("Data Size");
//wb.write(fileOut);
while((aLine=logReader.readLine()) != null) {
if(aLine.startsWith("<MESSAGE TYPE=\"EVENT\"")) {
Matcher m = startMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
initReq = false;
m = initMessage.matcher(aLine);
if(m.find()) {
initReq = true;
} else {
if(initReq) {
m = initResMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
} else if(aLine.startsWith("</MESSAGE>")) {
if(!skip) {
sBuf.append(aLine);
readed = true;
} else if(!skip){
sBuf.append(aLine);
if(!skip && readed) {
String tempStr = sBuf.toString();
if(tempStr.length() > 0) {
boolean reqMatched = false;
Matcher m = null;
if(initReq) {
m = initMessage.matcher(tempStr);
actName = "Intialization";
} else {
m = requestMessage.matcher(tempStr);
String time = "";
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
} else if(!initReq){
m = requestMessage1.matcher(tempStr);
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
if(time.length() > 0 ) {
try{
requestTime = sdf.parse(time).getTime();
}catch(Exception ex){}
System.out.println("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
//bw.write("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
String reqDataSize = dcf.format(((double)time.length()/1024.0))+"K" ;
rowReq = sheet.createRow((short)counter);
rowReq.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)0).setCellValue("Request");
rowReq.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)1).setCellValue(actName);
rowReq.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)2).setCellValue(time);
rowReq.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)3).setCellValue("");
rowReq.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)4).setCellValue("");
rowReq.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)5).setCellValue("");
rowReq.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)6).setCellValue(reqDataSize);
counter = counter +1;
System.out.println("counter is "+counter);
Matcher l = sentMessage.matcher(tempStr);
Matcher k = rcvdMessage.matcher(tempStr);
if(l.find()) {
for (int i=1; i<=l.groupCount(); i++) {
String groupStr2 = l.group(i);
try{
sentTime = sdf.parse(groupStr2).getTime();
}catch(Exception ex){}
if(k.find())
for(int j=1;j<=k.groupCount(); j++) {
String groupStr1 = k.group(j);
try{
recdTime = sdf.parse(groupStr1).getTime();
}catch(Exception ex){}
presentTime = (recdTime - sentTime);
hasTime = hasTime + presentTime;
hasCalls = hasCalls +1;
if(!reqMatched) {
if(initReq) {
m=initResIDMessage.matcher(tempStr);
} else {
m=responseMessage.matcher(tempStr);
if(m.find()) {
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
try{
responseTime = sdf.parse(groupStr).getTime();
}catch(Exception ex){}
String resDataSize = dcf.format(((double)tempStr.length()/1024.0))+"K" ;
rowRes = sheet.createRow((short)(counter));
rowRes.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)0).setCellValue("Response");
rowRes.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)1).setCellValue(actName);
rowRes.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)2).setCellValue(groupStr);
rowRes.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
rowRes.createCell((short)3).setCellValue((responseTime - requestTime));
rowRes.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
rowRes.createCell((short)4).setCellValue(hasTime);
rowRes.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
rowRes.createCell((short)5).setCellValue(hasCalls);
rowRes.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)6).setCellValue(resDataSize);
hasTime = 0;
hasCalls = 0;
counter = counter + 1 ;
sBuf.setLength(0);
readed = false;
wb.write(fileOut);
} // End of for (int fileNo = 0; fileNo < children.length; fileNo++ )
} //End of else
fileOut.close();
} //End of public static void main
} // End of ClassFirst of all, use [code]-tags to make your code readable, please.
I didn't do a complete inspection of your code (because it's too much and unreadable as it is) and I don't know POI, but creating a new HSSFWorkbook for each input file sounds fishy to me ... try re-using the workbook and just creating a new sheet in each iteration. -
Which inf file to use for HP LaserJet Pro 200 color m251nw, when updating the driver?
My printer is LaserJet Pro 200 color Printer M251nw. I visited the support page and found there is a newer driver.
Driver (61.117.01.15301)
Currently my driver version is 61.117.1.11493. I want to upgrade the driver.
After downloading and unzipping the files into the folder, I found there are 3 inf files in the folder:
hpcm251u.inf
hpcm251c.inf
hpbuio70l.inf
So which one should I install? I am disappointed at the lack of information and inconvenience in upgrading the driver.
JuneHi CJKim,
Welcome to the HP Forums.
I see that you are trying to update the driver and are not sure which .inf to choose.
I will be happy to help you.
Since it is running through the add printer wizard you can select any one of the .inf files you listed
to update the drivers.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Win 7 can't find inf file through network.
I have an old hp G85 that works great. i have the printer connected via usb to a computer that is running windows xp and that computer is connect via network cable into the wireless router. my other laptop is running win xp and works fine using a wireless card, i can print through the computer to the printer just fine. my new laptop can see the printer but it is looking for an inf file to install the printer. when i connect the printer to the laptop by the usb cable the computer can locate and install the printer but once i disconnect the cable and try to print and i get a print error. i tried to download an install exe file but it doesn't like my win 7 os. any suggestions? i don't want full function operations of the printer, i just want to print through my network.
"when i connect the printer to the laptop by the usb cable the computer can locate and install the printer but once i disconnect the cable and try to print and i get a print error."
After connecting the printer to the new laptop with Win 7 installed and installing the driver, did you go into the print driver properties and make sure the printer was connected to the shared printer port (Example: \\winxplaptop\oj85) rather than the local (USB) port for printing? -
How do I set the default folder for file - open file... ?
When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani -
I can't open an autorun.inf file on my macbook, what should I do?
I have a problem because I want to open a CD that has autorun.inf documents on it. It is actually a CD that has drivers lisence tests on it and it is definitely not just written text. I read on the Internet that it can only be opened on Windows. Please tell me this is not true since this is the only computer I own. Thanks in advance
Definitely Windows only > http://en.wikipedia.org/wiki/Autorun.inf
Mac OS X cannot read an .inf file. -
Mac Pro/Boot Camp - inf files for Windows XP & Apple 23¨ cinema displays
have a Mac pro with the ATI video card. I have installed Boot Camp 1.1 and can boot to win XP or Mac ok when I use a dell monitor for win xp. If I use the apple displays, the screen often doesn't turn on at all - just black screen though it has booted to win XP as I can type in my password and hear it log in. If I boot to Mac and then change to Win, it sometimes displays Win XP OK. However, when it does do that, it dosn't recognise the Apple Display - rather it is a plug and play monitor with lousy resolution. Are there .inf files for the Apple Displays to work properly on XP?
Try WinAcd <http://sourceforge.net/projects/winacd/>
-
Can't get Printer to Share need INF file
I have a HP 6500 E709n All in One Printer and I cannot get it to share. I have it connected to my Computer running Win 7 and I want to share the Printer with my Laptop running Vista. I cannot set it up to share, I get 2 error messages all the time the one is:
The file "INF" on (Unknown) is needed I cannot find the INF file and can't download it. The other error messages I get is:
The Print Spooler has stopped working and was closed or the other error message is: Spooler Subsystem APP stopped working and was closed.
When I check the Print Spooler In Services it is on Started and on Auto, how do I get rid of these error messages that appear all the time and get my Printer to share to my Laptop? As a point of information the Printer is set up correctly to share.Make and model number of modem?
Make and model number of router?
Computers connected via wire or wireless?
OS of computers?
Please detail all steps you have done to troubleshoot the issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!
Maybe you are looking for
-
Unable to establish AV call with Lync server 2013 from internal to external remote users
Hi, Instant messaging is working fine When trying to video call from the internal Lan to an remote external user Video call connects for 10 seconds and then drops. This also happens between federated sites when we initiate the call Internal to intern
-
How can I save a PDF file sent to me in an attachment to my iPhone 5s
How can I save a PDF file or word file sent to me as an attachment directly to my iPhone 5s so if I want to read it I don't have to dig into my ail every time?
-
The dreaded 3F0, "hard disk not exist" problem
Okay, I have a degree in EE with a minor in comp sci. I understand how bios' work, etc. This is why the "answers" HP "tech support" gave me make absolutely no sense. Could someone please shed some light on this bizarre problem? I am trying to i
-
Lost new iDVD 11 themes. Anyway to get them back?
I have the disc for iLife but reinstalling didn't help. Did the latest update. Still no new themes. Any advice on how to get these back?
-
Hi, I know that Costs at Operation Level is possible in Ehp6 version of ECC 6.0, but in our system it is not available/not showing. I hope some business function need to activate to get the Costs at Operation Level node, Any body have idea how to act