Writing to the file

Hi guys,
Sometimes, I will need to write to a file the following entries:
writeToFile (String, String, int, String)
What is the best way to add the above line to the end of the existing file? I need to have single space between values:
e.g.
test test1 1 country
Thank you!
Leon

Use PrintStream . It has methods to perform append operation.

Similar Messages

  • Problem in writing to the file

    I use this labview code to read and save some electrical measurement data from a set of instruments. I am having a problem that the code stops writing to the file after a while. It stops responding too. The only way to stop it then is to use the task manager and kill it. The code was written for an older version of labview but now I am using labview 9. Everything else seems updated but there's a section that uses Write characters to file vi and that may be causing the problem. I made a few futile attempts to change it. I would highly appreciate if someone takes a look at it and could tell me what's going wrong.
    Attachments:
    JANUS 2.2_4K Probe edit (2).vi ‏60 KB

    I will second aeastet's advice - please look into how state machines and producer/consumer loops work and use them.  Your program is very inefficient, but is very similar to what I would have written before I learned about state machines and producer/consumer loops.  Start with the LabVIEW help and go from there.  These forums and the National Instruments website can give you lots of help.
    Two things that will help you for this particular problem:
    At every loop iteration, you are opening the file, seeking to the end of it, appending data, then closing the file.  This is very slow and the code you use, as mentioned above, will not work if the file size exceeds 2GBytes.  I would recommend you open the file once, then use the write primitive to write to it until you finish, then close it.  You do not need the write character to file VI.  No seeking.  No repetitive opening and closing.  You can either open and close outside the loop, or use case structures and boolean flags (as you have done for other things) to open and close inside the loop.
    After you write to the file, if you choose to graph, you are reopening the file, reading the entire thing, and plotting this data.  This is another major slowdown that will only get worse as your file gets bigger.  You would be far better off caching the data in a shift register and plotting it on demand.  It would probably take less memory, as well.  You may want to read the tutorial Managing Large Data Sets in LabVIEW.
    One last tip.  You use Value properties to read and set the values of front panel controls.  Local variables are far faster (about three orders of magnitude).  However, do not make the mistake of using local variables for data storage.  Data is wires.  Local variables are a way to communicate to the front panel.  You seem to have this down, but a reminder to others reading this thread is in order.
    Let us know if you need more explanation or help.  Good luck!
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • I try to download Captivate 8, but it gets real close to completely instaling and then tells me "Error writing to the file C:\Users\Matt\AppData\Local\Akamai\admintool.exe verify that you have access to that directory". What does that mean and how can i f

    I wrote the entire question in the title

    download directly without using the akamai dl manager.  ie, click cancel when the akamai dl mgr is offered and download both files offered in the popup window.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • File adapter Need to wait When Other Applicatio is writing the file

    Hi All,
    This is File to File Interface, iam using NFS here.
    While other application is writing the file to the Folder, XI Sender File Adapter shld wait for certain time and then pick it up.
    We have the Option " MSecs to Wait Before Modification Check" on File Sender Advanced TAB.
    But it is no Use, it is not behaving correctly.
    Please assist me on this
    Regards

    Hey Vamsi,
    I think you're good to go here. The behaviour is exactly as it should be. The polling interval takes priority when there is no file there but when there is a file there the modification check will take priority over polling interval so it will still wait the mandatory 2 minutes to ensure that no modification is taking place & that's exactly what you want. You don't want to pick up an incomplete file irrespective of when it was put there. So there will always be just over a 2 minute delay (or whatever you set the Msecs value to + a few seconds depending on where the polling cycle is when a file is written out but a max of 2 minutes & 19 seconds delay) when there is a file there but at least you'll have consistent data. If there is no file there the adapter will just poll every 20 seconds until a file arrives.
    The 2 minute 'wait' step is exactly that. The adapter will see the file then wait 2 minutes & probably does a timestamp comparison or something. It doesn't do a modification check within those 2 minutes. Having said that, I don't see why you can't reduce the Msecs interval. My reasoning is that you basically want to establish whether it's still being wriiten out before you pick it up. Even if you set it to 5 seconds you should still be able to pickup whether the file is being modified (I'm assuming that the check is doing a timestamp comparison). That will significantly reduce your time wait period.
    My assumption on the timestamp comparison was wrong It's actually does a comparison on file size when it reads the data in, see SAP Note (Point 3): [http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383231323637%7d]
    Another suggestion made on the note: Get the writing application to write the file out with an extension different to the one you're polling for. Then, after they have completed writing out the file, they can do a re-name to the extension that you're polling for. That could also speed up things.
    Regards, Trevor
    Edited by: Trevor Naidoo on Oct 8, 2009 9:38 AM

  • There was an error writing the file

    I used Bridge CS2 and Camera Raw 3.7 to batch process about 1500 Raw CR2 files from a Canon 20D down into basic jpg files. I got about 1200 pictures done and all of a sudden it started giving me an error saying, "there was an error writing to the file." It appears that it will no longer process any CR2 files. It gives the same error for each file as it processes, with no more helpful information.
    I tried changing various settings and processing different images taken from different times in the past and I now get the same error with all of them.
    Anyone know what's wrong?

    Sounds like your hard drive may be going south. But a lot more details about your platform and setup are needed before anyone can help.

  • How to set the header of the file to excel type when writing it?

    Hello,
    I am using POI API to read an excel file that I have previously written using Java, but not using POI (I've written the file using Microsoft office xml and then writing it using FileOutputStream with an xls extension).
    The problem is that when I read back the file I am getting this error:
    The system was unable to upload the file: Invalid header signature; read 7311066695147732796, expected -2226271756974174256.
    which means that the header of the file is not excel typed.
    If I manually open the file and save it as excel POI is able to read it but I don't want to do this as this entire process of writing/reading the file should be automated. I don't want to use POI for writing the file because POI cannot provide me everything that I need when Microsoft office xml can.
    So, my question is simple: Is there a way, using java, to set the header of a file to excel so that POI will recognize it as such?

    hi roy,
    @see: http://poi.apache.org/hssf/index.html
    "HSSF is the POI Project's pure Java implementation of the Excel '97(-2007) file format. It does not support the new Excel 2007 .xlsx OOXML file format, which is not OLE2 based."
    maybe jexcelapi supports you in writing your xls:
    http://jexcelapi.sourceforge.net/
    hth, jens

  • Controlling the share permission when writing a text file

    I have several application that writes a delimited text file to a file share.  Another application, not a LabVIEW application then reads the delimited text file.  When my application is creating and/or writing to the delimited text file, is there a way to manipulate the permissions so that no other application can read the file at the same time I'm writing to the file?  I can do this in Visual Basic via the FileShare (http://msdn.microsoft.com/en-us/library/system.io.fileshare(v=vs.110).aspx) option when creating filestream, but I don't see this option in LabVIEW.  Thanks.
    Solved!
    Go to Solution.

    Nevermind.  I believe this can be accomplished with the "Deny Access" function.

  • Short Dump when writing the file to Unix.

    ST22 Dump Log.
    Short text Error when writing to the file "/appl/data/backlog/outbound/bop_bwfcstngall_erp
    What happened? Resource bottleneck
    The current program "ZPS_BACKLOG_NEW_READ" had to be terminated because
    a capacity limit has been reached.
    _Error analysis
    An error occurred when writing to the file
    "/appl/data/outbound/bop_bwfcstngall_erp_20110919_151220.dat".
    Error text: "A file, file system or message queue is no longer available."
    Error code: 52

    ask your basis collegues, the dump says that the file system was not available, so it is clear that your writing to Unix could not happen.
    have a look into OSS Note 1100926 - FAQ: Network performance

  • Client_text_io does not write the file but does create it.

    Hello there!
    I have a form which generates a .txt file using client_text_io webutil function.
    this is the procedure:
    PROCEDURE CREA_FILE IS
    MYFILE CLIENT_TEXT_IO.FILE_TYPE;
    OUTFILE CLIENT_TEXT_IO.FILE_TYPE;
    MFILE VARCHAR2(1000);
    MLINE VARCHAR2(5000);
    RESP NUMBER;
    BEGIN
    MLINE:='LINE TO WRITE...';
    MFILE := C:\test.txt;
    OUTFILE := CLIENT_TEXT_IO.FOPEN(MFILE,'w');
    CLIENT_TEXT_IO.put_line(OUTFILE, MLINE || ' 123');
    CLIENT_TEXT_IO.Fclose(OUTFILE);
    EXCEPTION
         WHEN OTHERS THEN
         CLIENT_TEXT_IO.Fclose(MYFILE);
         message('ERROR: '||SQLERRM);
    END;
    It works on OAS 10g + forms 10g. the file is created fine, BUT I have tried with forms 11g unsuccessful.
    My forms 11g are running under weblogic and the RedHat server.
    Im running the forms app from my laptop Windows XP.
    I configured webutil as the MOS note said, the thing is, the file is created, but no data is writted.
    I can open the file test.txt but the line I tried to print is not there, the same thing with 10g and the file is good.
    help me please.

    What are you doing after writing to the file? Are you leaving the form? Forms performs event bundling when sending data over to java beans;
    v_FILE_HANDLE := CLIENT_TEXT_IO.FOPEN (FPATH, 'W'); most certainly uses get_custom_property at the end to retrieve the file handle from the bean which will cause a "synchronize" as data must be retrieved from the bean before continuing in the PL/SQL code whereas
    CLIENT_TEXT_IO.Put_line(v_FILE_HANDLE,v_string_prov);
    CLIENT_TEXT_IO.FCLOSE (v_FILE_HANDLE); most certainly uses set_custom_property which is a one-way street and data is bundled up and sent as one package. If you have e.g. a exit_form right after those calls there is a chance that forms waits for some other data to be sent over to the bean but won't send it, as the form doesn't exist anymore after the exit_form. The same would happen if you'd do a
    v_FILE_HANDLE := CLIENT_TEXT_IO.FOPEN (FPATH, 'R');
    CLIENT_TEXT_IO.FCLOSE (v_FILE_HANDLE); right after writing your form as fopen will cause the sync (with the possibility that java will still hold a file lock on the file as the fclose method won't be called).
    cheers

  • Need to delete the file

    Hi Experts,
    I have one requirement, I am getting CODEPAGE error. To over come this i have a solution.
    but in that i am writing into the file and replacing the special characters with the space.
    But after writing into the file i want to delete the file, so that no conflict should be raised for two parallel user are accessing the same program simontenously.
    Kindly suggest how to delete the file after writing. and the time stamp of the file deleting in ddmmyyhhmmss format.
    Thanks in advance.
    Regards,
    Chirag

    Hi Chirag,
    A sample code snippet for you:-
    DATA FNAME(60) VALUE 'myfile'.
    OPEN DATASET FNAME FOR OUTPUT.
    OPEN DATASET FNAME FOR INPUT.
    IF SY-SUBRC = 0.
      WRITE / 'File found'.
    ELSE.
      WRITE / 'File not found'.
    ENDIF.
    DELETE DATASET FNAME.
    OPEN DATASET FNAME FOR INPUT.
    IF SY-SUBRC = 0.
      WRITE / 'File found'.
    ELSE.
      WRITE / 'File not found'.
    ENDIF.
    The output appears as follows:
    File found
    File not found
    Regards
    Abhii

  • Problem writing object to file

    Hi everyone,
    I am creating an index by processing text files. No of files are 15000 and index is a B+ Tree. when all files processed and i tried to write it to the file it gives me these errors.
    15000 files processed.
    writing to disk...
    Exception in thread "main" java.lang.StackOverflowError
            at sun.misc.SoftCache.processQueue(SoftCache.java:153)
            at sun.misc.SoftCache.get(SoftCache.java:269)
            at java.io.ObjectStreamClass.lookup(ObjectStreamClass.java:244)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1029)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:380)
            at java.util.Vector.writeObject(Vector.java:1018)
            at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:380)
            at java.util.Vector.writeObject(Vector.java:1018)
            at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
            at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
            at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
            at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
            at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
    ..........can anyone point out the mistake im doing?
    thanks

    the B+ Tree is balanced and is perfectly working without writing to the file. and i am using default writeObject() method of ObjectOutputStream.
      try {
                                FileOutputStream   f_out   = new   FileOutputStream ("tree.idx");
                                ObjectOutputStream obj_out = new   ObjectOutputStream (new BufferedOutputStream (f_out));   
         for (int x = 0, l = files.length; x < l; x++) {
              ProcessTree(files[x].toString());
                    System.out.println("Writing main index to the disk...");
                    obj_out.writeObject (tree); 
                    obj_out.flush();
                    obj_out.close();
                    } catch (Exception e)
          System.out.println (e.toString ());
          System.out.println("Error Writing to Disk!");
        }

  • How to insert new line char while writing bytes into file

    Hello Sir,
    Is it possible to insert the new line character in set of String variables and stored them into bytearray ,then finally write into File?
    This is the sample code which i tried:
                 File f = new File(messagesDir,"msg" + msgnum + ".txt");
                 FileOutputStream fout = new FileOutputStream(f);
                    String fromString = "From:    "+msg.getFrom()+"\n";
                    String toString = "To:     "+msg.getTo()+"\n";
                    String dateString = "Sent:    "+msg.getDate()+"\n";
                      String msgString =msg.getBody()+"\n";
                    String finalString=fromString+toString+dateString+msgString;
                    byte[] msgBytes = finalString.getBytes();
                    fout.write(msgBytes);
                 fout.close();in the above code , i tried to add the new line as "\n" in end of each string. but when i look into the generated files msg1.txt , it contains some junk char [] .
    please provide me the help
    regards
    venki

    but it has still shown the the junk char, its not able
    to create the new line in the created file i am afraid
    how am i going to get the solution?:(Do not be afraid dear sir. You are obviously using a windows operating system or a mac operating system. On windows a newline is "\r\n" not '\n', and on a mac a newline is '\r', not '\n'. If you make that correction, dear sir, your program will work.
    However, there is a better way. First, you probably want to buffer your output if you are going to write more than one time to the file, which will make writing to the file more efficient. In addition, when you buffer your output, you can use the newLine() method of the BufferedWriter object to insert a newline. The newline will be appropriate for the operating system that the program is running on. Here is an example:
    File f = new File("C:/TestData/atest.txt");
    BufferedWriter out = new BufferedWriter(new FileWriter(f) );
    String fromString = "From: Jane";
    out.write(fromString);
    //Not written to the file until enough data accumulates.
    //The data is stored in a buffer until then.
    out.newLine();
    String toString = "To: Dick";
    out.write(toString);
    out.newLine();
    String dateString = "Sent: October 27, 2006";
    out.write(dateString);
    out.newLine();
    out.close(); 
    //Causes any unwritten data to be flushed from
    //the buffer and written to the file.

  • LSMW unable to read the file .its givining Dump

    Hi,
    I am facing problem ,while reading the Data. Below is the Dump.how can i slove this problem
    The current program, "/1CADMC/SAP_LSMW_READ_00000002", had to be terminated because a capacity limit has been reached.
    Error analysis
        An exception occurred. This exception will be dealt with in more detail
        below. The exception, assigned to the class 'CX_SY_FILE_IO', was not caught,
         which
         led to a runtime error. The reason for this exception is:
        An error occurred when writing to the file
         "ZCO_ZCO_UPLOAD_PROFIT_CNTER_UP.lsmw.read".
        Error text: "No space left on device"
        Error code: 28

    It is in my business card.
    https://www.sdn.sap.com:443/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=3s67bbqock8=
    Regds
    Manohar

  • Open dataset doesn't lock the file at OS level

    Hi,
    I have a program, which tries to write a file on application server. Once the file is opened, and while program is writing to the file, if somebody goes at application server and deletes the file, I get a short dump, saying the file doesn't exist.
    Why doesn't SAP lock the file at OS level? Why is someone able to delete the file while SAP is processing it? What is to be done to check at OS level, to see if SAP is currently writing?
    Thanks,
    Juwin

    I tried what Kesav and Adrian told. I created 2 programs, 1st to create a file and 2nd to move the file.
    1st program: [url]http://www.mediafire.com/?gmrn1zyd0t0
    2nd program: [url]http://www.mediafire.com/?di2kzzzemkz
    Now, I executed the 1st program. While the 1st program is running, I executed the 2nd program. The Open dataset in the 2nd program always gave me sy-subrc as 0. So, I always got the message as ready to be moved. I tried executing the programs from different SAP user IDs as well. Got the same result. So, it seems, Open dataset, doesn't even lock the file at SAP level. I cannot use Open dataset for output in the second program, because that will erase the contents of the file.
    I cannot change the program, to execute a system command, because the file is created from a standard program, and we dont want to touch it.

  • How to sync writing to a file?

    Hi all,
    I'm implementing a simple line logger for my web applications.
    Basically, I have some class with a "write" method, that appends a line of text into a certain file.
    All of my web apps log into the same file (by design).
    How do I make sure writing to the file is synchronized?
    The web apps cannot share logger objects between them (not even singletons, correct?) so using the 'synchronized' qualifier for the 'write' method won't work because each web app has its own instance of the logger object.
    Also, FileLock won't work since all web apps "live" inside the same JVM (accoding to javadoc, FileLock is not suitable for syncing file-writes by different threads within the same JVM).
    I've looked up the forum for answers to these questions, but non of the threads on this topic provided any leads...
    Any ideas?

    hii...
    can sum1 plz tell me how to replace bytes in a file?
    i've used randomaccess to open the file....read is
    contents and write back to it at the desired
    locations using seek()...however at some position if
    i wish to read the data and replace it with new data
    at exactly the same location...how can i do it??
    bye.i had already mentioned my problem....actually i want to read a record from a file and then update it at the same location in the file...so i need to replace it(or delete the record and re-write the new info).

Maybe you are looking for