Wrongly created the rman catalog
Hi friends,
in my prod server i created catalog user and catalog tablespace and am not create catdb.
i connect to target database and I took backups.
is it valid backups?
if not what can I do?
regards
You may want to follow these instructions for details on the process:
Step 1. Creating a Recovery Catalog
Step 2. Managing Target Database Records in the Recovery Catalog
Again, you should NOT create the recovery catalog in your target (production) database.
Similar Messages
-
Create the Product Catalog from Flat file
Hi,
We have a requirement to create the Product catalog (CRM) from flat file data. We have the required data like Product catalog ID, description, sub areas and products are present in the Exel file. Now we need to create product catalog automatically using the report. Can u give me any pointers on what FM and BAdis to be callled in this report?.
Thanks and Regards,
S ReddyLink:[Create product basic Data|http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DDC84252E3AEF0F1AA5A001A64D3F460&id=8C145DB8CF3A11DC2B8D000F20FCB6A9]
-
How to recover the rman catalog
all,
I have created a recovery catalog and back it up using the control file and the nocatalog option - see below
rman nocatclog target=rman
run{
backup database;
backup (archivelog all delete input);
How do I recover the catalog if it dies?
rgds
alanhi,
thanks for the response. I will give it a try, but at a cistomer site doing this and they have no test server to try it on. Production only so need to be sure of what is going to happen.
rgds
alan -
Backing up the RMAN catalog database
Version: 10.2.0.1.0
We have created a database to host our RMAN catalog. This catalog holds backup info plus RMAN stored scripts for 5 production databases . Now, we need to backup this RMAN catalog database.
I am going to use the control file as the catalog (ie. NOCATALOG) for our RMAN catalog database. This should be fine. Right? Any best practices i should follow regarding this?Sometime back I had the same question.
What I decided was cold backuo and RMAN using the control file. (A Belt-and-suspenders approach)
I also do an export daily after all the other backups are done.
In addition I keep an information on it, location and size of all files, a current PFILE (it does not change much), what patches etc.
Given its tiny footprint it would be easy to rebuild given all this. -
Best strategy for backing up the rman catalog database
I have seen people do
1. full export
2. backup with control files
3. put a repository in another database and cross backup
What do you use?
I am in 10.1, but this is a general question.Hi,
1. full export
This is a logical backup - don' treat it as permanent - it's not physical backup for recovery scenarios.
2. backup with control files
In the case of loss of control files, its can be used for that.
3. put a repository in another database and cross backup
It's to persits the data Base backup histories in another database, gives the facility to clone/ re- build the DB to different node - in terms of crashes.
For stratergy you need to checl with your SLA's and primarly refer to ORACLE Doc's you can able know the pro's and con's. Based on that you jutify what better suits your Application.
- Pavan Kumar N -
Need a create db script to manually create a 10g rman catalog db on unix
Hi, Gurus:
I would like to manually create a rman catalog database (Oracle 10g) on a HP-UX environment. Could anyone share a sql script to do that?
It is going to be used to backup about 15 databases directly to tape and the retention policy is going to be 35 days. How big the database should be?
Thanks in advance.I can't find any documentation supporting Oracle support's theory.And who writes the Oracle documentation? People in this forum?
You got the "Best Practice" advise.
If you have rman catalog on the same server or on the same database, it is like storing your backup on the same server you took it from.
So, the idea od RMAN catalog is to have your catalog available for any recovery. If you cannot recover your recovery catalog, then you are better off using the controlfile as the repository. -
Creating RMAN catalog. Are these steps correct?
Are these steps to set up the RMAN catalog correct?
I.
The following two databases are the target databases which needs to be backed up.
1. a 11.1.0.7.0 database
2. a 10.2.0.1.0 databaseII.
Catalog schema in a 10.2.0.4.0 database called catdb.
III.
I am going to use the RMAN client(10.2.0.1.0) in my laptop (Windows Server 2003).
CATALOG schema creation
=======================
To create the Catalog Database (10.2.0.4.0), this what i am going to do in catdb
a. create tablespace CAT_TBS
b. CREATE USER rman_cat_schema
IDENTIFIED BY rman_cat_schema
DEFAULT TABLESPACE cat_tbs
TEMPORARY TABLESPACE temp
QUOTA UNLIMITED ON cat_tbs;
c. GRANT create session TO rman_cat_schema;
d. GRANT recovery_catalog_owner TO rman_cat_schema;
e. GRANT execute ON dbms_stats TO rman_cat_schema;
f. Invoke the <font color="red"><b>RMAN binary from my laptop</b></font> :
C:\>set ORACLE_SID=catdb
C:\>rman catalog rman_cat_schema/rman_cat_schema@catdb log=catalog.log
Hopefully Catalog will get the created at catdb .
Registering the database
=========================
To register the database,this is what i am going to do.
a. Add the Tns Entry about the catdb in tnsnames.ora file of the target database
b. Log in to target database's machine and invoke the<font color="red"><b> RMAN executable in the target database. </b></font>
$ export ORACLE_SID=oraprod314
$ rman TARGET / CATALOG rman_cat_schema/rman_cat_schema@catdb
c. Then i can give the REGISTER DATABASE command. like
$rman > register database;
Edited by: Citizen_2 on 14-Sep-2009 11:46Yes, You can connect to RMAN catalog using a lower version client. see this.
SQL> conn rman/rman@mycatdb
Connected.
SQL> select * from rcver;
VERSION
11.01.00.06
SQL>
rman
Recovery Manager: Release 9.2.0.7.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> connect target /
connected to target database: STSTDB (DBID=2045697105)
RMAN> connect catalog rman/rman@abcd.
connected to recovery catalog database
RMAN>
You can take the backups and do recoveries. But, if you want to achieve certain features of the recovery catalog of higher versions to backup / recover your database, you better use the right RMAN client which allows the features to use.
It is always advisable to use the RMAN Client same as the database version you want to backup to avoid any confusions.
Hope it is helpul.
Regards
Edited by: vasu77 on Sep 15, 2009 10:01 AM
Edited by: vasu77 on Sep 15, 2009 2:11 PM -
How to create a product catalog in crm(by the end user of the system)?
how can we an end user create a product catalog?
what is the diff b/n prod cat and prod?
we download the prod from r/3.
how we get the prod cat done in crm for the customers and consumers and how it is done?
thank you,hi
first of all we need to look at what is catalog management before proceding with product and product catalog.
You use this business scenario to create a centralized product catalog that contains product descriptions, multimedia objects, pricing, and associated literature. The catalog enables quick and easy customer access to timely and personalized product information, structured in such a way that most meets your customers needs.
Product catalogs are implemented in sales processes and are of particular importance in CRM Web Channel for presenting your products in the Web shop.
difference between the product and product catalog
this is not the thing that product and product catalog are completely different entity.
Product catalog : A grouping together of products from your product master data, in a structured hierarchy.
You use product catalogs to group together products to present them in the Web shop, Interaction Center, or in other forms of media, for example printed format or CD-ROM.
You can create various catalogs for your products in the product master and use them according to a validity date. For example, you could use certain products for the summer season, and other products for the winter season.
You can also tailor your product catalog to meet other needs by creating catalog variants. For example, you can create a catalog in English with the prices displayed in US Dollars.
so by above definition it is very much clear that products are actually assign to the catalog,i will give you an analogy that museum is a kind of catalog and you add different pictures to the museum,in the same way you add product to the product catalog according to the acatlog variant.
Now how you assign product to product catalog
Product Assignment
You assign products manually or automatically to a catalog area, depending on the catalog type. The product ID, product description, and status of all products is displayed, as is the information as to whether the item contains accessories or if it is a configurable product.
Prerequisites
You have created products in your product master in SAP CRM under Accounts and Products
Process
You select a catalog area in your product catalog, and edit the item list by assigning products to the area.
Manual Assignment
You can assign products manually on an individual basis or by copying a catalog area. You tend to choose manual product assignment for marketing-oriented catalogs that are subjected to editorial controls.
Individual assignment
In this case you select the catalog area in which the product should be assigned, manually search for the product in the product master, and assign it to the area.
Copying items from catalog areas
You select an area or subarea from another catalog and copy it to your new catalog. The system copies all products from the copied area to the new catalog, as long as they belong to the distribution chain assigned to the target catalog variant. From these products, you can then manually determine which products from the copied area you want to keep and which items you wish to delete.
The following is true for manually assigned products:
You can activate or deactivate items on an individual basis.
You can edit the list of accessories for manually assigned products. The system determines which accessories are maintained for the product in the product master and displays them in the item area of the catalog. You select which accessories should be displayed for the product in the catalog and activate them.
Manually assigned products can be included or removed from catalog views on an individual basis.
Automatic Assignment
You can assign products automatically to a catalog by transferring product hierarchies from your product master to the catalog areas. The categories, items, attributes, and documents contained in the product hierarchy are copied to the new catalog.
You use automatic product assignment mainly for functional catalogs, where products can be copied with very few changes, from the product categories of the product master. It enables a standardized characterization of your products in the catalog.
The following is true for products assigned to the catalog using product hierarchy transfer:
Product categories which make up the hierarchies become catalog areas in the catalog.
Product categories in the product hierarchy must be assigned to the distribution chain to which the target catalog variant is assigned. Otherwise the category is not transferred. The same applies to the items, texts, and documents assigned to the category.
Items are always active and cannot be individually activated or deactivated.
Accessories maintained for transferred product in the product master are automatically included and displayed in the catalog.
Transferred items cannot be individually included in catalog views or removed from them. Instead all items of the hierarchy are always contained in the view.
Lists of characteristics for transferred categories and items can be automatically created when transferring product hierarchies. The transferred values are included in the item overview of the product catalog.
how to create a product catalog
just have a look at this link
http://help.sap.com/saphelp_crm60/helpdata/en/1c/12b2dc57d644d19ea3a5c4156f904f/frameset.htm
your query regarding the products you have uploaded from the R3,now as above i said how you maintain and create the product catalog ,you just assign the products uploaded from the R3 to the product cataloag created in CRM.
more detail info you can see in these links
http://help.sap.com/saphelp_crm60/helpdata/en/91/be9642e5ef0731e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/27f09d25da5a68e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/037716cfc604a9e10000000a114a6b/frameset.htm
if you read carefuly what i have said,it is pretty easy to implement ,you will see it yourself
guess it will help you
do revert back in case of any doubt
best regards
ashish -
How to delete and create the CCM MASTER CATALOG in Catalog Content?
Hi All,
Please provide the solution as we are in real trouble.
We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog
http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
In the link above I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happens the first time that you are using the system.
Catalog Creation
You use this function to create catalogs in SAP Catalog Authoring Tool.
You can create the following types of catalogs:
Supplier catalogs
Procurement catalogs
Model service catalogs
Note
SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
1. How delete the CCM/MASTERCATALOG?
In a Test environment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs don't disappear once the CCM/MASTERCATALOG is deleted.
2. Once the CCM/MASTERCATAOG is deleted how to created again?
According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
I follow the steps to create the CCM/MASTERCATALOG for the first time however I didn't get a positive result.
Any help provided will be really appreciated.Hi,
Generation of the /CCM/MASTER_CATALOG is automatic and does not require any additional effort from a catalog admin other than accessing the CDC (Edit Catalogs).
If the catalog is not regenerated at this point it is likely that you then receive an error like 'Error reading catalogs, error reading Master Catalog' or something similar which would indicate that the previous deletion of the master from either table /CCM/D_CTLG or /CCM/D_CTLG_REQ was not successfully completed or that the update operation in table /CCM/D_UPD_STATE remained in update status and never for some reason completed (status 03).
Deletion of the Master catalog should not cause the deletion of any other catalog, unless you have chosen 'delete all catalogs'! Choosing the Master and delete should result in only a deletion request for the master catalog, be aware however that all mapping records between Supplier -> Master -> Procurement catalogs will be destroyed and cannot be 'rejoined' but only rebuilt from scratch. It is also advisable after the Master deletion to chcek with report /CCM/CLEANUP_MAPPING which orphaned items and mapping records require cleanup as it is better to remove these before proceeding with the new mappings.
Regards,
Jason -
How to restore the control fie? without having RMAN catalog.
Hi ,
can anyone help me out here.???
How can i restore the control file.if i dont have the RMAN catalog.
Please provide me steps that'll be helpful. I am frsher in oracle DBA
Please mail me: [email protected]
Regards
Vikas SinghHi Vikas,
You can restore the control if you have the full backup of your database in some location.
Lets assume you have the full backup piecs in loc "/u02/backup/..bkp"
steps:
shut abort;
startup nomount;
catalog start with "/u02/backup/..bkp"
restore spfile from '/u02/backup/..bkp";
restore controlfile from "/u02/backup/..bkp"
shut immediate;
startup mount;
alter database open;
Once the db is up with controlfile immediately take the full database backup of your database.
Let me know having issue after following this.
-- rohit
http://dbarohit.blogspot.in/ -
SQL Reports Bad Idea Against RMAN Catalog?
11.2.0.1 SPARC 64
We use OEM to manage/execute our backups. The MML is NetBackup. One downside to this is that the "job" within OEM executes the backup for 20+ databases. In a serial fashion the backups occur in NetBackup...but most are queued - they throttle through and over time they complete. To this end, we have no way of seeing the true backup duration. We know the rman start and completion times, but they're not "actual."
I started looking at creating a sql statement/report/[pl/sql] block that would give us the granular informatin on the true timings of the backup "pieces" as they relate to a "set."
Research out on the wire shows a number of high level solutions, but nothing to which a report shows the data files, etc. Usually when I see this I start to question..."hey, is this even a good approach?"
I do realize that through the RMAN utility there are a number of reports which are available...this post, however, is focused on the idea of sql reports against the rman catalog.
Any advice would be welcome.
Conceptual report:
-> INCREMENTAL LEVEL 0
--> BACKUP SET
---> BACKUP PIECE
----> HANDLE, TAG, DATAFILE, START, COMPLETION
I'm NOT looking for the sql...I can work that out, I just want to know if this is a smart approach or best to stay out of the catalog.
-abe
Boulder, Colorado
Edited by: user10863631 on Mar 10, 2011 7:43 AM
Edited by: user10863631 on Mar 10, 2011 7:56 AMI think this is the wrong forum for such a question. The Database - General (General Database Discussions might be better suited. Or maybe the RMAN forum (Recovery Manager (RMAN)
-
Is there any table/view that we can find the hostname of the database backup stored in RMAN catalog data dictionary? Thanks
Hi Sam, you should really create your own question rather than updating one from 2008 :)
The RMAN catalog knows about DBID because that is what it needs for backup and recovery. It could care less where the current instance is running from. Now I know from your post yesterday that you have grid control. That seems like a better candidate for whatever you are trying to accomplish. Take another peek at:
http://docs.oracle.com/cd/E11857_01/em.111/e12135/views.htm#BACCFCAB
MGMT$TARGET.HOST_NAME is most likely what you are after. If I'm wrong open a new thread.
Good luck. -
Unable to create OLAP Metadata catalog in EIS
We are planning on creating new Essbase apps using EIS to create and load from our relational data warehouse databases. Have worked with Essbase for many years, but never EIS. We are currently on 9.3.3 for all Hyperion apps. I successfully installed the Integration Services Server on our test environment (Windows) and verified that the service is running. Also installed the Integration Services Console on my PC. We created the Metadata catalog database/tablespace on our MS SQL Server (2008). Using the ODBC Data Source Administrator on the EIS server, I created a new ODBC data source for this database following the instructions in the EIS install guide and used the “SQL Server” driver as specified. I was able to get a successful test connection within the Data Source Administrator and successfully saved the Data Source. However, when I first use the Integration Services console and first try to create the Metadata catalog, I get the following error: ODBC Error [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified. I enter the correct EIS server name, but have to manually type in the Catalog ODBC DSN name as the one I created doesn’t show up in the drop down. I also verified that the correct administrator userid and password are used. What could I be missing or doing wrong? Thanks. Mike
Yes, I am using the Essbase server name. The only other thing I can think of is the driver version. I just used the one called "SQL Server" which is what the install guide said. However, this is the 9.3.1 guide, so may be outdated info for 9.3.3. I did not use the DataDirect 6.0 drivers that were installed when I installed the Integration Services software on the server. Is it possible I need to download Microsoft SQL Server 2008 Native Client 10.0 and install that on the server? That is the other thing. There currently is no SQL client software installed on the EIS server. Could that be the problem? Thanks
-
Hello
We have 7 major oracle instances on 2 servers and we have created a RMAN catalog on another server
Our principal databases are Standard Oracle 10g (10.2.0.2.0) under linux , and the catalog is Enterprise Oracle 10g (10.2.0.2.0) in Windows all the databases are registered in catalog when I query RC_DATABSE view it shows all
instances informations , in all RMAN login commands the "CATALOG" clause has been written
Now my problem is that just two of databases backups are recorded in catalog for example when I query "RC_BACKUP_SET" view it only contains backups of two databases while are backups have been performed completely without any error
Do you know what is problem ?
thank youselect dbid,name from rman_user.rc_database;
DBID NAME
<h4>---------------- ----------------</h4>
1498968931 SCSDB
4293064263 SSTDB
861276728 SUBDB
2404423160 SAM
3976246282 SFIDB
1760672514 SCEDB
817528985 S900NS1
select t.name,t1.db_id,bs_key
from rman_user.RC_BACKUP_SET t1,rman_user.rc_database t
where t1.db_id=t.dbid;
NAME DB_ID BS_KEY
<h4>---------------- ---------------- ----------------</h4>
SUBDB 861276728 14366
SUBDB 861276728 14365
SUBDB 861276728 14364
SAM 2404423160 14491
SAM 2404423160 14490
SAM 2404423160 14489
select name, max(START_TIME)
from rman_user.rc_database d,
rman_user.rc_backup_set s
where db_id(+) = dbid
group by name
order by 2 desc;
NAME MAX(START_TIME)
<h4>---------------- ----------------</h4>
SCEDB
S900NS1
SCSDB
SFIDB
SSTDB
SAM 6/14/2008 1:06:15 AM
SUBDB 6/13/2008 9:02:43 PM
This date (6/14/2008) is old because I haven't used the catalog for a long time, due to the problem I've mentioned above.
Edited by: TakhteJamshid on Jan 10, 2010 2:49 AM
Edited by: TakhteJamshid on Jan 10, 2010 3:00 AM -
One 8i instance and two rman catalogs 8i and 8
Can I have a single 8i instance for RMAN only with two catalogs, one for 8i and one for 8.0?
Robert,
Yes you can use a single database for 2 recovery catalogs. You can create 2 different schemas for each RMAN catalog version and each of those schemas can hold a different version of the RMAN catalog.
The only reason I can think that you would need 2 different catalogs is because you have an 8.1.X target and a 8.0.5 target? If so, make sure to have the RMAN catalog be the latest 8.1.x release.
In general, the rules of RMAN compatibility are as follows:
o The RMAN catalog schema version should be greater than or equal to the catalog database version. See "Note 1: 8.1 or Later Catalog Schemas in 8.0 Catalog Databases".
o The RMAN catalog is backwards compatible with target databases from earlier releases. See "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases".
o The versions of the RMAN executable and the target database should be the same.
Note 1: 8.1 or Later Catalog Schemas in 8.0 Catalog Databases
RMAN cannot create release 8.1 or later catalog schemas in 8.0 catalog databases.
Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases
Restore operations for an 8.0.4 or 8.0.5 target with an 8.1 or later catalog schema do not work when both these conditions are met:
The target database is mounted or open
You are connected to a recovery catalog
If any of these conditions is not met, then you can use an 8.1 or later catalog schema with an 8.0.4 or 8.0.5 target database.
Note 3: 8.1.6 Catalog Schema and Pre-8.1.6 RMAN Executable
Using a pre-8.1.6 release of the RMAN executable with recovery catalog schema of release 8.1.6.0 or 8.1.6.1 (newly created by 8.1.6 RMAN executable using the CREATE
CATALOG command) requires the following update at the catalog database:
SQL> UPDATE CONFIG SET VALUE='080004' WHERE NAME='COMPATIBLE';
null
Maybe you are looking for
-
I am new to Mac's and to iPhoto. I have had some success importing photos that I backed up to DVD using my PC but one DVD is causing me problems. I can view the JPEG photos stored on the DVD when I use my PC but for some reason my Mac can only see th
-
Can't remove PC-DOS from Windows 7 Boot menu after using PC-Doctor for DOS Bootable CD
I have a T60, Win 7 Pro I had some issues and tried the PC-Doctor for Dos bootable CD to run some diagnostics. Since then, upon bootup, I have a PC-DOS option in my boot menu that just won't go away. Using EasyBSD, the only os supposed to be in the b
-
What cameras are compatible with the camera connection kit
what cameras are compatible with the camera connection kit and ipad2
-
Changing playback level in portion of a single track
How do I change the playback level of several seconds of V/O? Or, how can I get the entire track to play at the same level?
-
Removing toolbar when PDF is opened?
I have a form accessed through a web page. The user's adobe reader will open the form within the browser... which looks a little cluttered. Is there a way to script the PDF to tell the Adobe reader to hide the toolbar, menu, status bar, etc... ?? tha