WRVS4400N Models / EOL Support Dates
Forum,
Can someone please provide official End of Life Support dates references for the WRVS4400N models. I have owned this device for quite sometime and feel it needs to retire.
Cisco,
You could have provided better support by releasing a DD-WRT version of firmware along with more frequent IPS releases. I personally will never purchase any of your SOHO UTM style devices ever again. While I have not experienced any nightmares with the device, I am not exactly impressed with your abandoning support for the device without official notices.
I know of multiple security issues with the device that "SHOULD HAVE BEEN ADDRESSED", but Cisco never took action. SOHO devices like this could have better support models if you followed some of the open source community models. I won't go into the security issues here out of respect for others.
Things Cisco could of done:
1. Release IPS signatures more frequently - I can count on one hand the number of releases you provided.
2. Release a DD-WRT version of the firmware - the communities could of taken the ball and ran with it and made customers much happier at low cost for Cisco. WIN WIN for everybody and increases customer satisfaction.
Results of not supporting the SOHO device(s):
Cannot speak for anyone else here but I work on really large IT contracts (millions $+). Your sporadic support makes me feel less confident about Cisco overall. In the long run I definately won't recommend your SOHO products to ANY future customers, and I will be more wary of your more expensive security hardware.
Hello Rrathbun and thanks for participating in the Small Business Support Community. It seems you did not get the service you expected and I'd like to escalate your case if possible. Can you please provide me with your Small Business Support Center ticket number(s)? You can either post here or email me directly (streaves at cisco dot com).
If you have not yet opened a support ticket, please do so ASAP. You'll find a list of contact numbers here: www.cisco.com/go/sbsc. The US Center is available 24/7 and there is never a charge for warranty support.
Thanks,
Stephanie Reaves
Cisco Small Business
Similar Messages
-
QR code model type supported by Adobe live cycle
Hi All,
Which model type of QR code supported by Adobe??
model 1 -- normal prototype
model 2 -- enhanced
Is there any one who can tell me the difference between 2 model type of QR code??
Regards
Abhishek
Email Id -: [email protected]QRCode Model 1 and Model 2 provide two variations on the structure of a QRCode barcode according to the AIMI standard. Model 1 is the prototype of Model 2. Model 2 has an alignment pattern for better position adjustment and thus enables larger data capacity than Model 1. Model 1 supports up to 14 versions, where a version describes a dimension such as 21 * 21 or 25 * 25. Model 2 supports 1 to 40 versions. The version 40 can contain up to 7,089 numeric characters.
LiveCycle Designer ES/ES2 supports Model 2 and 10 versions.
Steve -
Log dopo il riavvio:
Incident Identifier: 0C578488-F96C-459E-B787-B5AFE7008316
CrashReporter Key: c61856f29e97da35d62d6affec18a94747794dbe
Hardware Model: iPhone2,1
Date/Time: 2012-05-08 19:22:48.562 +0200
OS Version: iPhone OS 5.1.1 (9B206)
Debugger message: WDT timeout
9s ago: 2384b50 2384r385000 2284m10004003 2284u0 2284u0 2183m0 2183u0 2083m0 2083u0 1992pe0000270 1992pe0000280 1992s385000 1982pe0000320 1979pe0000300 1979r385000 1977m0 1977u0 1877m0 1877u0 1816pe0000270 1815pe0000280 1815s385000 1804pe0000320 1800pe0000300 1800r303000 1800m0 1800u0 1700m0 1700u0 1600m0 1600u0 1500m0 1500u0 1400m0 1400u0 1300m0 1300u0 1200m0 1200u0 1100m0 1100u0 1000m0 1000u0 900m0 900u0 800m0 800u0 700m0 700t3b 600m0 600bff 500m0 400m0 300m0 200m0 100m0 0m0
OS version: 9B206
Kernel version: Darwin Kernel Version 11.0.0: Sun Apr 8 21:50:49 PDT 2012; root:xnu-1878.11.10~1/RELEASE_ARM_S5L8920X
iBoot version: iBoot-1219.62.15
secure boot?: YES
Paniclog version: 1
Epoch Time: sec usec
Boot : 0x4fa94b9f 0x00000000
Sleep : 0x4fa94c25 0x00054271
Wake : 0x4fa94c66 0x0000000e
Calendar: 0x4fa94d24 0x0006d995
Task 0xc03cbd20: 7443 pages, 92 threads: pid 0: kernel_task
thread 0xc0544ca0
kernel backtrace: cba8bad0
lr: 0x8007ccab fp: 0xcba8bafc
lr: 0x8007d331 fp: 0xcba8bb28
lr: 0x804435bb fp: 0xcba8bf78
lr: 0x80443839 fp: 0xcba8bfa8
lr: 0x8007b37c fp: 0x00000000
Task 0xc03cbac0: 197 pages, 3 threads: pid 1: launchd
Task 0xc03cb600: 635 pages, 7 threads: pid 12: UserEventAgent
Task 0xc03cb140: 524 pages, 4 threads: pid 13: wifid
Task 0xc03caa20: 133 pages, 4 threads: pid 17: syslogd
Task 0xc03ca560: 255 pages, 2 threads: pid 19: powerd
Task 0xc03c94c0: 480 pages, 2 threads: pid 26: lockdownd
Task 0xc0753600: 1101 pages, 14 threads: pid 32: mediaserverd
Task 0xc07533a0: 350 pages, 2 threads: pid 33: mediaremoted
Task 0xc0753140: 352 pages, 3 threads: pid 34: mDNSResponder
Task 0xc0752ee0: 1406 pages, 10 threads: pid 35: locationd
Task 0xc0752a20: 655 pages, 6 threads: pid 37: imagent
Task 0xc07527c0: 695 pages, 4 threads: pid 38: iapd
Task 0xc0752300: 172 pages, 4 threads: pid 40: fseventsd
Task 0xc07520a0: 555 pages, 1 threads: pid 41: fairplayd.N88
Task 0xc0751980: 571 pages, 10 threads: pid 44: configd
Task 0xc07514c0: 412 pages, 3 threads: pid 46: awdd
Task 0xc07a3d20: 404 pages, 4 threads: pid 49: apsd
Task 0xc07a3ac0: 472 pages, 2 threads: pid 50: aggregated
Task 0xc07a3860: 5158 pages, 16 threads: pid 51: SpringBoard
Task 0xc07a2c80: 815 pages, 12 threads: pid 56: CommCenterClassi
Task 0xc07a2a20What is your technical support question?
-
I'm trying to find the dates in which Mozilla stopped supporting versions dating back to Firefox 1.5.
Basically, support ends when Mozilla decides to end it. There are parameters as to when support will end, but "stuff happens" and sometimes they postpone the EOL life date when they feel a security update is warranted.
I found this via a Google Search for Firefox 1.5 EOL. <br />
http://ubuntuforums.org/showthread.php?t=389977
For Firefox 2.0 it was like 12-29-2008, when 2.0.0.20 was released. That version is dated 12-17-2008.
http://en.wikipedia.org/wiki/Mozilla_Firefox#Release_history <br />
Has the release dates for each version, but not the EOL dates. -
HT201471 is iPad model A1430 supporting the 4G Cellular?
is iPad model A1430 supporting the 4G Cellular?
If its not in Airplaner mode, the cellular feature is permanently activated. You can turn Data or no Off to avoid Data Roaming charges. But the cellular connection is always on, unless you put it in Airplane mode.
You should get the name of your cell company in the top left corner if its connected to it. -
Java MQ 3.6 End of Support date?
Is there an announced date for the End of Support of Java System Message Queue 3.6?
TIA!The following are the end of support dates for MQ 3.6
Product Name Prod Status EOL Date Full Support End Date Limited Support End Date (EOSL)
Sun Java System
Message Queue 3.6 SPx EOL 08/2008 08/2009 08/2013
There won't be any bug fixes after Full Support End Date. -
List view error "Filter Value is not in a supported date format"
I've column "Name = Order Status","Type = Calculated" & Data Type = "Date and Time". I've given this Condition in the formula:- =IF(NOT([PO Date]=0),"ORDERED","NOT ORDERED"). I'm trying to create view
for this column but its getting error while create the view "Filter Value is not in a supported date format".
Same error I'm getting for column "Name = Status","Type = Calculated" & Data Type = "Number". I've given this Condition in the formula:- =IF([PO Date]="","",IF(NOT([Balance Qty]=0),"OPEN","CLOSED"))Can you check data type returned for your calculated column 'Balance Qty'?
Try to set it as Number. It may help you.
Thanks. -
We are currently supporting an older application which will no longer be patched for future browser releases. We need the end of support date, so we can plan accordingly. Any assistance is truly appreciated.
Hi Tony, and thanks for the reply. I was hoping that might be the case.
Does Mozilla not publish lifecycle dates for Firefox? The reason I am inquiring further, is that our intention is to have upgraded the product we are currently running by late August of next year. I was trying to determine if 3.6 would be supported through August of 2012. I probably should have been more specific with my initial post. -
Error when create classification model by Oracle Data Miner 10.1.0.2
Hello every body!
Please help me!
I have created a classification model by Oracle Data Mining 10.1.0.2, Oracle 10g Release 1 (10.1.0.3) with following options:
Single record per case
Adaptive Bayes Network algorithms
SingleFeatureBuild
When finished, i receive an error with following detail content:
ORA-40101: Data Mining System Error ODM_ABN_MODEL-ODM_ABN_BUILD--20002
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "DMSYS.ODM_ABN_MODEL", line 458
ORA-06512: at "DMSYS.ODM_ABN_MODEL", line 5664
ORA-40101: Data Mining System Error ODM_ABN_MODEL-ODM_ABN_BUILD--20012
ORA-06512: at line 1
Hope you help me!
Thanks!Hi,
Can you provide instructions that recreate this problem using sample data we provide in the SH schema?
Thanks, Mark -
Supported date formats for sorting
Can someone point me to a document describing the supported
date formats for sorting? I mean, how should I format a date column
in an XML dataset in order to have this column correctly sorted
using the Spry framework?
Thank you and sorry if the question is trivial.Thanks, what I have done for the moment as a temporary
solution is to use the two date formats and have them both inside
the one cell in the table (the column for the sortable date
yyyy-mm-dd). In my CSS I have created a style for the first date
that has it's visibility as hidden. That way it's sorting the Date1
but only Date2 is being shown to the users as the other cells have
more than one line of text it doesn't look too off centre.
<div spry:region="ds2">
<table width="662">
<tr>
<th width="127" class="eventhead"
spry:sort="Date1">Date</th>
<th width="151" class="eventhead"
spry:sort="Type">Type</th>
<th width="146" class="eventhead"
spry:sort="Title">Title</th>
<th width="189" class="eventhead"
spry:sort="Venue">Venue</th>
</tr>
<tr spry:repeat="ds2" spry:setrow="ds2">
<td height="53" class="event">{Date2}<span
class="eventhide">{Date1}</span></td>
<td class="event">{Type}</td>
<td class="event">{Title}</td>
<td class="event">{Venue}</td>
</tr>
</table>
</div>
</div>
It seems to be working for the moment... -
Issue with CIF Integration model for Transaction data
Hi Gurus,
I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
Is there any way to avoid the following exercise as it is taking very long time for activation.
Please guide me as it is very urgent.
Thanks for help in advance...
Thanks & Regards,
JagadeeshI assume 1,60,000 location products are spread around different locations.
Rather than one Integration Model it is better to have multiple Integration Models.
For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
This way you reduce the number of Products in an Integration Model.
It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
But if you have country spefic or region specific Integration Model - only that country is affected not all.
In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
Hope this gives you some direction.
Somnath -
Hi,
Could you please tell me what is the lifetime support dates (Premier Support, Extended Support, Sustaining Support Ends) for JDeveloper 11g.
Thanks.It doesn't seem to be listed on the lifetime support pages, but I'm sure if you file a quick SR, you'd get an answer fast.
John -
Logical Data Model Vs Physical Data Model
Hi guys, what is the difference between, logical data model and physical data model.
Duplicate Thread:
Logical Vs Physical Data Model
Daljit Singh -
I've tried using "Service Advisor" option in CAM to try to collect support data I get the error "The device has been unregistered from this application. Please close this service advisor window.".
How to fix this?
Thank youHi.
1. You can use command line for collect support data.
/opt/SUNWsefms/bin/supportData -d <array_name> -p /tmp -o supportdata
Result : /tmp/supportdata.zip
2. For trubleshuting current problem, please show result of:
cd /var/opt/SUNWsefms/store/Reports
for i in report* cache*
do
echo $i
perl -ane '/[^[:ascii:]]/ and print;' < $i
doneHow many arrays registered in the CAM ?
Check that for this array work next point in CAM:
-> Trubleshuting -> FRU
-> Trubleshuting -> Events
Regards. -
i purchased my imac 6/07 ... model 6,1 it has 4 gb ram and plenty of free space, also connected to time machine for backup. currently have latest lion os 10.7.4.
when i went to upgrade i get a model not supported message? what spec or device integral to my model is holding this back? can i get around this or am i just at a brick wall? would like to upgrade if possible? have a 2.33 ghz intel core duo processor, 4 GB 667 Mhz DDR2 SDRAM
anyone know what is going on with apple and this model, wife has last years mac mini and it's upgrade went off without a hitch
thanks !Apple has tightened its requirements for this OS upgrade, and some older Macs— even ones that qualified for Lion — won't make the cut for Mountain Lion.
The general system requirements are straightforward:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Apple also lists which models support Mountain Lion:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
From what i've read elsewhere, your older model of iMac has a CPU and logic board that partially runs in 32 bit mode at times. Mountain Lion requires that they run Exclusively in pure 64 bit mode. Yours cannot be made to do that.
Hope this helps
Maybe you are looking for
-
First my Lumia 520's store was having app,games,music and podcasts. I didn't know what I did that made it miss the music search so I checked it again it had only app and games. Solved! Go to Solution.
-
External Editor and File Names
When I am in Aperture, I do the Open in External Editor to open Photoshop. I then make my changes to the image, and press save then close the file in Photoshop. Now back in Aperture the new image shows up, but it has a new name! I need to keep the sa
-
TMS_CFG_CREATE_A2D_REQUEST
Hello friends, I am trying to add my BW production system(BWP) in the domain.My domain controller is R3D.I mounted trans aswell.By that time i am getting below error please help me on this. Diagnosis An RFC error occurred in the TMS communic
-
Help With Essbase Outline Extractor Output
Hello Gurus I am using Essbase Outline Extractor 9.3.1 to extract from Essbase 9.3.1 and I need a bit of a hand interpreting the results\Output. I'm after properties but Dynamic Calc, Shared Member, Never Share, & the Aggregation. Can anyone please h
-
Outbound program for Customer mastrer
HI, My requirement is when ever customer is created or changed with existing customer and save the customer i need to send the customer bank account details(Credit/Debit) details along with header details through IDOC. Could you pleaser suggest me wh