X Symbol in Work Flow Applet
Hello All
Does any one saw a scenario like this -
1 - When you open a SC and open Approval
2 - Instead of opening Java Applet , it show you a X Symbol and tell Application error in table view.
If yes , how to track or monitor that how many SC have a scenario like this ? And also how to fix this ?
Please respond.
Thanks
Awanendra Singh
Please refer the below threads:
Error in graphical display of Approval preview
Graphical view for approval preview
Regards
Kathirvel
Similar Messages
-
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
Symbols do not flow into InDesign from standard text file
Within our application, we have the option to type in symbols within a text editor. Symbols include the copyright, registered, and trademark symbols. We then take the text that is typed in and merge the text to a standard text file, then place that file within InDesign CS3. At one think those symbol flowed in perfectly, but recently those symbols do not flow into InDesign on their own. What could be causing this problem.
Any body have any thoughts?
Thanks,
BrianYou can get these three (serif) characters in Symbol with
<0xF6D9><0xF6DA><0xF6DB>. Your three characters come in pink (which
means they don't exist in the font). It could be that they used to work
because you had a different Symbol font loaded. I always seem to have at
least three Symbol fonts (T1, TT, OT) going, even though I try to only
have one.
But why bother with the font change? These characters are ANSI: © ALT
0169, ® ALT 0174, ALT 0153. You should be able to see them in your
text editor and in just about every decent text font.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com -
Urgent : Work flow in ABAP
Hi friends,
kinkly send me about Work flow. Also send me step by step procedure on how to do work flow. Thanks in advance.Hi,
check the below links
REfer this link:
There is a good book from SAP Press that I would
recommend as a starting point.It's called Practical Workflow for SAP and it is by Alan Rickayzen.
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Work Flow
1) Goto Tcode PFTC : Standard Task > Create Button>Workflow Templete
For Create Container
Element : ZBUS1001006
Name : ANy Name
Description
Data Type & Properties
Data Type:
select Object Type : BOR Object Type for BUS1001006
Properties:
Parameter Settingd : check all Import, Export & Mandatory Checkboxes
Basic Data :
Abbr : Create_View
Name : Some Name
Work Item Text : Create View Material & -
Click on DELE Button & Select Material From The List
Object Catagory : BOR Object Type
Object Type : BUS1001006
Method : View
Triggering Events
Obj Catagory Object Type Event
BOR Object BUS1001006 View
activate it
Enter on BUS1001006 Object Type you will get Quadratel<> Button after that
double click on Quadratel<> button you get green button
after that the system will generate the task No.
check in the Event linkage Tcode : SWETYPV
if you find an entry with your Workflow and linkage active
goto Tcode : SWEC click on New Entries
Change Doc Obje Obj Cat Obj Type Event on create
Material BOJ Obje BUS1001006 View Option Button(Checked)
save this
goto Tcode : SWEC
Change Doc Object : Material
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Check with On Create Button
Goto SWETYPV
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Receiver Type : Some Work Flow No: WS80000431 like this
Click on Work flow Builder
~~Guduri -
Sharepoint Foundation Can not update External List by Work Flow
Hi
I try to update External List by other list Work Flow, in Sharepoint 2010 Foundation.
Here is the manual:
http://msdn.microsoft.com/en-us/library/office/ff394479(v=office.14).aspx
But it fails , and the error message is “The
workflow could not update the item in the external data source. Make sure the user has permissions to access the external data source and update items.”
Is there some limited in Foundation?http://social.technet.microsoft.com/Forums/en-US/0bb9ef28-3614-4db2-b19f-dd81e8cc2d42/the-workflow-could-not-update-the-item-in-the-external-data-source?forum=sharepointgeneralprevious
With no Secure Store in Sharepoint what we ended up doing was creating a new external content type, adding a new connection and picking a connection type of .net type instead of sql. This means we needed to create a .net app as the go between but within
.net we had all the usual tools for connecting to sql without permission issues.
Also check
http://wyldesharepoint.blogspot.in/2010/06/setting-up-external-content-type-for.html
If this helped you resolve your issue, please mark it Answered -
File not found error at Attachement link in GroupVote of Human Work Flow
Hi Gurus
In Human Work flow,
I have created the GroupVote and assigned to two person.
I checked "share attachments and comments" to share their issues.
One signed on to WorkApplist and review the forms and attached the file,
The file link was created but it could not be downloaded.
it could not delete.
I tested several times it occured same results.
It did not be happend when this option "share attachments and comments" was not checked.
domain log and opmn log are as below.
<2008-08-25 14:55:15,468> <ERROR> <oracle.bpel.services.workflow> <::> Identity Service Authentication failure.
Identity Service Authentication failure.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
at oracle.tip.pc.services.identity.jazn.xml.XMLAuthenticationService.authenticateUser(XMLAuthenticationService.java:150)
at oracle.tip.pc.services.identity.jazn.xml.XMLIdentityService.authenticateUser(XMLIdentityService.java:426)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:299)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.authenticate(TaskQueryService.java:135)
at worklistapp.servlets.Login.handleRequest(Login.java:101)
at worklistapp.servlets.BaseServlet.doPost(BaseServlet.java:157)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
OAS version is 10.1.3.1.
Any advice will be appricated.
ThanksYou are getting : ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
This means that you have wrong username/password entries in your configuration files. Please recheck them and then things should be fine...
Hope this helps!
Cheers
Anirudh Pucha -
Triggering a sub work flow for multiple users at same time.
I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated. -
Work flow block in credit memo request
Hi Friends,
I want to create a credit memo. I am creating the credit memo like: Sales order>Invoice>Credit memo request-->credit memo. Now my credit memo request is got created but is assigned with Workflow block at header level, now when I am going back in VA02 and saving it after removing the block at header level, but when I am again checking in VA02/VA03 work flow block is there. Now when I checked that in my workflow , it is in outbox and but I am not able to approve it becoz it is in outbox.
Where it is going for approval , it is only created by me and I don't see any approver field in credit memo request screen.
In the wrokflow outbox am getting that block CMR --as completed and get CMR approver as Error.
How can I remove the workflow block ? Any pointers.
Regards
Ashu
Edited by: ashutosh p on May 20, 2010 1:39 PMPlease check the Workflow log. By default whenever you create or act on any workflow workitem it will appear by default in your SAP Outbox.
Thnaks
Arghadip -
Screen output without connection to user - Work flow
Hi,
i have created a workflow, it has a task which refers to a method which call a BDC in N mode, but workitem is not generating, in event trace showing RFC status 'Screen output without connection to user'.
Same time i observed in ST22 for any dumps, as it is giving this error 'DYNPRO_SEND_IN_BACKGROUND'.
Please suggest how to solve. Thanks in advance.
BR,
RajaniHi Vijay shah /Rick Bakker ,
As i am on leave from last 2 days, sorry for delay in response.
As the work flow tasks and what ever the methods i developed are working as per requried.
But after each step by step analysis i founn every usefull information regarding the background type activity options.
Solution :
In background type activity step, in details tab we have option of ->Advance With Immediate Dialog flag is set to X, due to this system checking for user interaction.
Because of this its creating problem. After unmarking the falg i am able to execute the task in background successfully
with out any problem.
Once again sorry for delay in reponse
BR,
Rajani -
Dear all,
we need a workflow for creation of material master.
Say Basic data is created by MM dept.
then MRP & work Scheduling views are created by PP dept.,
then Purchase views are by MM again,
then inventory dept. creates storage locations,and f
inally finance dept creates Costing & Accounting views.
Our requirement is when over one dept. completes creation of their respective view, mail should get triggered to subsequent dept. to continue the work.
regards,
K.Kumaran.Dear,
Use Tcode SWDD for work flow activities....Take help from your ABAP team...Give them the user Authorizations based upon your requirement.
Hope this will help you.
Regards
Utsav -
Using web services in Approval Work flow in OIM 11g
Hi All,
I am a new bie to OIM 11g. I have created an approval work flow and it is working fine.
Now my requirement is to use a web service in the approval work flow instead of directly embeding the java code in Java Embeding Activity. Can some body share me a document or url for the process of doing it.
Thanks in advance for the help.
Thanks,
PreetiIf you are using OIM 11gR2 please refer the below document. All steps are very clear with the screenshots.
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/request.htm#autoId27
See section 21.3.5.7 Configuring the Human Task and BPEL Mappings
Also see this OBE tutorial for getting idea on Java embedding activity and assigning and retrieving data from global variables in SOA
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/Request_Workflow_for_Self_Registration/request_workflow_for_self_registration.htm -
Issue regarding [Work Flow] Business Object Event Raise in ABAP Program
Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Hi,
Can anybody solve above posted issue!
Thanks,
Deep. -
OM:Cost of Goods sold work flow customization to take it from concerned off
OM:Cost of Goods sold work flow customization to take it from concerned office in the place of inventory org
Yes FOX can be difficult to achieve things that are simpler than simple
The way you described, it will only search fo a standard price on the same currency.
Try to set the currency as changeable characteristic and then search prices for each possible currency.
standard price value = {standard price, currency1} + {standard price, currency2} etc..
The possible currencies could also be filled in a variable which is read at runtime.
Don't know an easier way!
Regards,
Beat -
Any Special transaction code for Activation of Work flow
Hi all.
Any Special transaction code for Activation and deactive of Work flow?
which have we need to transport after WF (like task,method,rule)?
To be reward all helpfull answers.
Regards.
JayIf I understand your question correctly, you want to know how to activate your workflow after transport ?
Normally, the status of a workflow is included in your transport (if I'm not mistaken)
So activate/deactivate in your dev-system and transport it.. -
Field symbols not working in data transfer VOFM routine
Hi,
I have been trying to set a value using field symbols, however for some reasons its not working. I am using a field symbol in a data transfer routine and the value which I am trying to set is a standard field outside the VOFM routine code.
I am trying to set a field gla_subrc which is actually a changing parameter.
The actual paramter is gn_subrc of type sy-subrc and within the form the name is gla_subrc. I need to set this changing parameter gla_subrc using the data transfer routine.
Is there a specific rule that field symbols dont work for changing paramters within subroutine or is there a specific syntax.
The syntax I am using is
ASSIGN ('(SAPLV50S)gla_subrc') to <fs>.
I also used the local program name instead of main program but still that does not work. Tried using the actual parameter as well.
Can someone please help me in this.
Thanks & Regards,
Naresh.I need to stop outbound delivery creation against STO using vl10b transaction. The only way to stop creation is using data transfer delivery VOFM routine.
If i give an error message MESSAGE E001, this will give a hard error which is not acceptable. To avoid this, i use a perform message statment with message id and certain parameters which can displayed in a log.
However to make sure this message is displayed in log, I am clearing a work area having specific data needed for delivery creation.
Because of this clear, my error message gets captured in log but along with this another fake message is displayed in log which caused by the clear message.
The user gets confused as he now sees 2 messages, 1 which is correct and other 1 which is fake and that confuses him.
Data transfer routine is not the best place to give messages in log but we have very few options. The only way the system can give 1 message is if i set gla_subrc to 1. This is a variable which will help the system understand that the delivery should not be created as there is something wrong because the value is 1. Hence it will stop the creation and instead display whatever message i had passed to the log.
I need to somehow set this variable to 1 based on lot of analysis that has been done in the past.
Please let me know if there is any way by which we can fix this.
Thanks & Regards,
Naresh.
Maybe you are looking for
-
Receipient port not getting populated in IDOC
Hi, I have checked the adapter specific identifiers, rfc destination and everyting seems to be correct. Still, my receiver idocs are not populated with receipient port. What should i be doing My scenario is xi-idoc(r/3) Partner number is getting po
-
How can I install a prior version of Photoshop Elements?
I own the CDs for Photoshop Elements 11, but have never installed it. How can I install PSE 11? I've loaded the serial numbers into my account, but I don't see any place to download PSE 11.
-
Disable Navigation framework of BW iview in portal page of KM Search result
We have BW Bookmarks in KM as Portal pages and recently we implemented search_from_here option for searching bookmarks of the KM folders. Trex index has been created. Search results of Trex displays the links of the searched BW Bookmarks. When clicki
-
Does anyone know when a Scene Builder update is going to be released?
This issue is driving me crazy. Does anyone know when v2.0.1 of Scene Builder is supposed to be released?
-
Install Oracle8.1.7 on Red Hat Linux 9
I tried to install Oracle8.1.7 on Red Hat Linux 9 and got error message: Unable to initialize threads: cannot find class java/lang/Thread Could not create Java VM My env variables: THREAD_FLAG=native LANG=en_US.UTF-8 CLASSPATH=/usr/local/jre/lib/rt.j