XControl frontpanel freezes when timeout 0

Hi
I have an XControl with a big event handler (about 20 events currently). When I run this XControl for debugging ("Run Continuously"), its frontpanel freezes after only a few clicks, sometimes even directly after start. When I set timeout in the event handler to a value greater than a few milliseconds, it works.
The event handler is built as described here: http://www.ni.com/white-paper/3198/en/
- Why does it crash when timeout is 0? Is this a normal behavior because the handler might take a few milliseconds to finish?
- Is it a good fix to just increase timeout to some 100 milliseconds or will I likely run into new problems?
Best regards,
Michael

Hi,
Can you tell me what is your version of labview and your OS.
Can you post your VI ?
Alexandre

Similar Messages

Frontpanel freezes when an event of an already closed event structure occurs

Hello,
I´d be very glad if someone could explain to me the behaviour of the attached short and simple vi.
If you press the OK button #1 once and then the OK button #2 the vi finishes, but if you press the first button more than once before pressing the second button, the front panel is locked. In both event structures, the feature "Lock front panel until the event case for this event completes" is enabled. If it is disabled the front panel is not locked after pressing the first button twice. What I do not understad is why if the feature is enabled the front panel locks after pressing the first button twice. I would think that after the loop containing the event structure closes, the event case should definitively be completed.
Attachments:
Event.vi ‏12 KB

This is expected behavior.
If you look at your event configuration, both events are set to "lock front panel until event completes". If you fire the second event first, the FP locks and you cannot trigger the first event any more.
Quick and dirty solution: uncheck "lock front panel...".
Better solution: learn about dataflow and proper program design. What you are doing here is not a good program architecture. Deadlocks, too sequential, event structures that cannot be serviced immediately due to dataflow dependency, etc.
Maybe you can tell us in a more general way what you are trying to do.
LabVIEW Champion . Do more with less code and in less time .

Labview freeze when accessing a custom menu with data on the clipboard

This one has got me stumped: When selecting a custom menu item with data on the clipboard the GUI freezes. Freezes are longer for more data and longer for older versions of Labview. I wrote the test code, attached, but the example "Menu Selection Demo.vi" shows the same behavior.
Running Labview 2011 here are some freeze delays for my laptop (a bit slower machine) with various amounts of text data on the clipboard:
Clipboard size        Delay
1.3MB                   2.1 sec
2.6MB                   4.9 sec
3.8MB                   17.2 sec
14MB                    253.3 sec
The delay appears to be non-linear. A doubling of the clipboard data size more than doubles the delay and a tripling of the clipboard data size produces a delay of almost 10X! Things are also much, much worse on my ancient version 8.2.1 (over a 40 second freeze for 1.3MB and it goes up from there).
Note that the freeze also occurs on programs with a custom menu when exiting. This would seem to suggest it might have something to do with the timeout, but why timeout should vary with clipboard size and not with the value wired to it makes this feel even more like a bug in the custom menu functionality.
This seems to be related to known issues in Labview 2011 #39604 49UBP4LE (http://www.ni.com/white-paper/13168/en#39604_by_Date) that was first reported in version 8.2.1. This known issue relates to Labview freezing when large amounts of data are copied from Labview to the clipboard. No fix has been implemented since this was originally reported in 2007.
This freeze also occurs when shortcuts to menu items (such as Ctrl + L) are used when large amounts of data are on the clip board.
Thus far this has been 100% repeatable and I have not been able to find a way around it. I also haven't found anything else similar on the forums or on the web. It appears to be a GUI freeze with Labview still running in the background, which is also odd.
My work-arounds at this point are either to not use the clipboard (bad), programatically clear the clipboard several times each second (worse) or remove all custom menu functionality and replace those functions with onscreen controls. So, for now, I'm removing custom menu items because my users need the clipboard and I can't have massive delays making my data acquisition code look crashed.
Any ideas would be helpful. This one has me scratching my head...
Attachments:
Menu_Clipboard_Lv2011.vi ‏17 KB

Well, doing Microsoft Word, Excel and what else on a computer that is used to run an important production test, is a very bad idea. There is no way that you can guarantee, that one of these applications is not causing some interruption to the currently running time critical task. Word and Excel and just about any other computer application can crash, lock up the computer or eat your breakfast while you are doing seemingly harmless things.
The issue with the clipboard in LabVIEW is indeed a problem that exists for a long time and I hope they fix it sometime, but the fact remains, that you should NEVER use a computer for other tasks while you run a test or other manufacturing related application on it, when a failure of that application can cost you more than a few pennies.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Extension Manager CS6 freezes when loading extensions

Extension Manager CS6 freezes when loading extensions
When launching Extension Manager CS6 it starts loading extensions but totally freezes when the last 30 percent of the loading extension bar is still unaccomplished. It is not possible to close the window, not even with the task manager. I have restart the computer to get rid of it.
My OS is Windows 7, 64 bit. The most recent versions of the entire Adobe CS family are installed, freshly updated, including the Extension Manager CS6.
To trace the cause of the problem I tried to create a log file in the folder C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6. I logged in as administrator and wrote in the Command Prompt Window:
echo > ExManLog.YES
The log file was created but contains nothing but "ECHO is on".
A possible cause of the problem might be that I have two installed active version of Ajatix Advanced CSS Drop Down Menu, which is an add-on to Dreamweaver. The first version is the free one, the second is the full paid version. I would like to deactivate the first one since which might make the Extension Manager happier. But the only way to deactivate it that I know of is to use the Extension Manager. Catch 22.

Dear Carl, thanks for the advice that made me understand how to remove an extension without using the Extension Manager. However, the problem persists, i.e the Extension Manager freezes soon after it is launched, when the last 30 percent of the loading extension bar is still unaccomplished.
Following your instruction I have tried to remove both my versions of the troublesome DW extension (Ajatix Advanced CSS Drop Down Menu). Which in my case meant that I deleted the following files:
the files com.ajatix.AdvancedCSSMenuLight.mxi, com.ajatix.AdvancedCSSMenuLight.mxi_air and com.ajatix.AdvancedCSSMenuLight.zxp in C:\Users\<My UserName>\AppData\Roaming\Adobe\Extension Manager CS6\EM Store\Dreamweaver CS6
and the files ajxcssmenu2.3.0.mxi, ajxcssmenu2.3.0.mxi_air and ajxcssmenu2.3.0.mxp in C:\ProgramData\Adobe\Extension Manager CS6\EM Store\Dreamweaver CS6
In the hope of cleaning out everything from this extension I have also deleted the following files:
AJXCSSMenu.chm, AJXCSSMenu.dll in C:\Users\UpdatusUser\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\JSExtensions
and AJXCSSMenu.chm, AJXCSSMenu.dll, AJXCSSMenuLight.chm, AJXCSSMenuLight.dll in C:\Users\ipb-master\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\JSExtensions
Every time I thus get rid of the Ajitex files the Extension Manager seems happy and loads the only extension I currently have left (Adobe exchange). However when I reinstall the Ajitex extension, the Extension Manager behaves in the same bad manner, freezes after approximately 70 percent of the process of loading extensions. Same thing when I remove this extension and try to install another from Ajitex (Email Spam Blocker). It seems to install all right but afterward the Extension Manager freezes when launched.
Don't know what to do now.

MacBook Pro Mid 2012 freezes when plugged in

Hi. My Mid 2012 MBP which runs on Yosemite 10.10.2 keeps freezing even when just browsing on Chrome so I uninstalled Chrome and used Safari. I was still having problems after switching browsers so I restored my device to its factory settings but the restore did not solve my problem. All this time my device was plugged in so I unplugged it and tried to browse. It did not freeze or crash. I read the forums and found out about the SMC reset and a NVRAM reset but my device is still freezing when plugged in. I am typing this while my MBP is unplugged. Please help.

Reset the SMC again:
http://support.apple.com/en-us/HT201295
Then try s safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Run an Apple Hardware Test:
https://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
Ciao.

I have a powerbook G-4 15 inch, It wont boot up and the display only works on the first try. it gets to the apple screen and freezes, when i try to restart theres no display. Help please, whats the issue here?

I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.

Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
 Cheers, Tom

IPhone 4 freezes when I try to make or receive a call

When I try and call another person my iphone freezes. Sometimes its instant, sometimes the speaker is lit up and then it freezes.
It also freezes when somebody tries to call me.
Please could somebody help as this is doing my head in.

Hey there ElizabethPetit,
It sounds like when you try and change your wallpaper the Settings app becomes unresponsive and you have to quit it. I want to recommend a few things here. First close all the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it with
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling

Numbers freezes when I attempt to open a file from the iCloud

Hello,
My Numbers app for my iMac freezes when I attempt to open a spreadsheet file from the iCloud. These same files open fine on my iPad, and I make sure to close Numbers on my iPad before I attempt to open the file on my iMac, but it makes no difference. The app freezes, and I have to manually force stop the Numbers process. Any help would be appreciated.

How do I get the dock to recognize the latest numbers version I have.
Go to the Applications folder, find Numbers 3 and drag it to the dock. It will then look like the lower icon here (the one with the 4 columns).
Another way is, if Numbers 3 is already open, to right-click the icon in the Dock and choose 'Keep in Dock' under 'Options':
You can drag the icon with the three columns off the Dock if you don't want to open Numbers 2 from the Dock.
SG

I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?

I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?

Tried all the usual restarts. Help?
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
===========
Your profile is a complete blank!!!!
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

ITunes 11.0.2.26 freezes when adding folder to library

iTunes 11.0.2.26 freezes when adding folder to library. This did not occur with any previous version and is taking place with several different folders. Adding files as a batch wrks fine.

Hi DJ_Dan,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
- Judy

Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly

Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
Original message posted Aug 4, 2007:
"For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
I have done the following:
Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
Thanks in advance for any help you can provide."
Solution provided by Apple:
I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.

As a guess it suggests to me that the leads on U28 need to be reflowed.
Mad Dog

Multi room DVR freezes when paused

Multi room DVR freezes when paused and won't play the show unless you change the channel. Unless you are recording that show, you can't go back to the point at which it was initially paused.

Sorry to hear about your box problems. Pull up the menu, then go to CUSTOMER SUPPORT, then IN HOME AGENT, then AUTO FIX COMMON DVR PROBLEMS. If you are still having this trouble, please send me a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Logic pro 9.1.2 freezes when opening and says quantize

I created a track, and every version of it freezes when i open it, it loads and then it brings up a window that says quantize and then it freezes at that point. with every version I have saved except version 1. This arrangement is extremely important. please help. it originally crashed and i didn't save the report, now i can't get it to crash again, now it just freezes. I can create a video of all of this happening if that would help?
KenECB

I've experienced this bug and have determined how to replicate it; it's caused when you perform an Audio-to-MIDI Groove Template function in the Sample Editor Factory on a Flex-Timed (Quantized) Region. Performing Audio-to-Midi Groove Template on a non-Flextime/quantized file performs as expected.
Here's a simple way to replicate the bug:
1. Create blank session, create 1 audio and 1 software instrument track
2. Import a drum loop into the audio track
3. Activate Flex mode, select Slicing on the drum loop
4. Select the software instrument track
5. Double click drum loop
6. In Factory, select Audio-To-Midi Groove Template, click 'Use'
7. Quit Logic
8. Relaunch Logic
The session now seems to be permanently corrupted. After force quitting Logic, Logic will continue to try to load this session on relaunch so you have to use another session to launch Logic rather than just click Logic's icon.
I've tried deleting the quantized audio file and removing all undo and fade files from the session directory but the session still hangs upon opening, so the corruption seems embedded in the session file itself.
I've reported it to Apple.

My mac keeps freezing when turned on from Sleep

Hello,
I bought in iMac last Summer. About a couple weeks in, I started having issues with my iMac freezing when I would turn it on from Sleep mode. This would not happen every time but instead, intermittently. It also will manifest itself in different ways: programs will freeze one at a time until all programs are frozen I just have spinning wheel, sometimes it will freeze and shut itself down, sometimes it will go to a grey screen, etc. This has made it an extremely hard issue to reproduce at the drop of a hat. The main reason this alarms is that I have a 4-year old Macbook that still works incredibly well, despite being slowerThroughout the past months, I have done just about everything I can think of (and was told to do by Apple support) to resolve this issue.
I have:
Reset the SMC and PRAM
Tried booting in Safe Mode
Deleted the EnergySaverPreference .plist file
Spent hours on the phone/text with various Apple technicians troubleshooting the issues.
Twice done a clean wipe and re-installed OSX. I had this problem with both Yosemite and Mavericks. I have made sure to never restore my Time Machine back ups but instead, bring isolated files in one by one and no "System Files" – just songs, music, documents, and applications.
Twice taken it in to the Apple Store to be repaired and nothing has been done to resolve the problem. I just got it back and within two days, it froze again in the same manner as before.
My technical specs are: iMac (21.5-inch, Late 2013,) 2.7 GHz Intel Core i5 processor, 8GB 1600 MHz DDR Ram, running OSX Yosemite 10.10.2.
I feel like I am really beginning to run out of options. I feel like I can not trust this machine to do daily tasks or the large projects for which I bought it. I do not have AppleCare but obviously this feels like a pre-existing software or hardware issue and I'm still under warranty. Apple has implied that there would be no way for me to receive any money back and the likelihood of getting a device replacement is very low. I don't have a car so taking my iMac via taxi or lugging it around via public transportation is both very inconvenient and a bit pricey for me. Any advice, technical, for customer-relations, or otherwise?
Any help would be greatly appreciated.

Here's what I got:
Anonymous UUID: F7046045-224A-33C4-D416-BA38288F06AA
Tue Mar 24 21:47:30 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff800c1c1694): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.10.73/bsd/kern/kern_exit.c:361
Backtrace (CPU 1), Frame : Return Address
0xffffff8116843e50 : 0xffffff800bd2fe41
0xffffff8116843ed0 : 0xffffff800c1c1694
0xffffff8116843f40 : 0xffffff800c1c135c
0xffffff8116843f50 : 0xffffff800c24b386
0xffffff8116843fb0 : 0xffffff800be36e86
BSD process name corresponding to current thread: launchd
Mac OS version:
14C1514
Kernel version:
Darwin Kernel Version 14.1.0: Thu Feb 26 19:26:47 PST 2015; root:xnu-2782.10.73~1/RELEASE_X86_64
Kernel UUID: 270413F7-3B44-3602-894F-AC0D392FCF8E
Kernel slide: 0x000000000ba00000
Kernel text base: 0xffffff800bc00000
__HIB text base: 0xffffff800bb00000
System model name: iMac14,1 (Mac-031B6874CF7F642A)
System uptime in nanoseconds: 17919473593239
last loaded kext at 10628493338895: com.apple.iokit.SCSITaskUserClient 3.7.3 (addr 0xffffff7f8e359000, size 36864)
last unloaded kext at 10755631197884: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8e330000, size 16384)
loaded kexts:
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 100.15.5
com.apple.driver.ApplePlatformEnabler 2.1.7d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMikeyDriver 269.25
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHDA 269.25
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleIntelHD5000Graphics 10.0.2
com.apple.driver.AppleIntelFramebufferAzul 10.0.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 910.26.12
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleBluetoothHIDKeyboard 176.2
com.apple.driver.AppleHIDKeyboard 176.2
com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
com.apple.driver.AppleMultitouchDriver 262.33.1
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOSurface 97.0.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.iokit.IOAcceleratorFamily2 156.6.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0

XControl frontpanel freezes when timeout 0

Similar Messages

Maybe you are looking for