*XDIM_REQUIRED statement not working

Hi,
we want to use the *XDIM_REQUIRED statement in a script for BPC NW in order to ensure that for a certain dimension, one explicetly has selected values (instead of leaving default <ALL>) in the data package. For this I would like to use the *XDIM_REQUIRED = TIME statement, but this keyword is apperantly not supported anymore ...
is this correct? Ifso , how to check that one has selected values for a certain dimension in a data package ...
D

Hi Ethan,
one major remark on your reply: how can you send the values of %SELECTION% and %SELECTIONTO to the BADI? If this would be possible, my issue is solved ... Problem is that:
1) I don't have a keyword for the %SELECTIONTO% variables ... for %SELECTION% I have the %DIMENSION_SET% key word
2) the variables one pass to the BADI are only designed for simple values (one record) for user defined variables ... not for the %DIMENSION_SET% keyword ... If i try following statement
*START_BADI FILTER_NAME
CATEGORYFROM = $SELECTION$
*END_BADI
(SELECTION is a variable in my data package: ... REPLACEPARAM,SELECTION%EQU%%CATEGORY_DIM%)
I get the value "%CATEGORY_DIM% in the it_param table in the BADI and not a table containing the selections ... the it_param table only supports a string value ...
So how to pass the selection to the BADI? I don't find a way to do this ...
Dries

Similar Messages

Select statement not working

hi to all,
I am trying to write use inner joining . here is code
DATA:tabname LIKE dd02L-tabname,
     table_disc LIKE dd02t-ddtext.
SELECT dd02ltabname dd02tddtext INTO (tabname,table_disc)
    FROM dd02l INNER JOIN dd02t on dd02ltabname = dd02ttabname
          WHERE dd02tddlanguage = 'E' AND dd02ltabclass = 'TRANSP'
                            AND dd02L~tabname = 'ZANKI*'.
    endselect.
      write : tabname.
I also checked in tables dd02t and dd02l for the table zanki* and data available in both table . but here select statement not working .do u have any idea about this. thank you

Hi,
I executed the ur inner join conditin by commenting 'z*' it's working fine.
I think where condition is not getting satisfied so u r not getting any data.
Please conform in where condition you need * 'AND'* or OR
I change decalration as below.
DATA:tabname    type TABNAME,
      table_disc type AS4TEXT.
SELECT dd02l~tabname
       dd02t~ddtext INTO (tabname, table_disc)
FROM dd02l INNER JOIN dd02t on dd02l~tabname = dd02t~tabname
WHERE dd02t~ddlanguage = 'E' AND
      dd02l~tabclass = 'TRANSP'AND
    dd02L~tabname = 'ZANKI*'.
endselect.
write : tabname.
Regards,
Pravin

Case when statement not working

hi there, I am trying to work out how to get my case statement to work.
I have got the following code.
select pthproto.pthdbo.cnarole.tpkcnarole, pthproto.pthdbo.cnaidta.formataddr as formataddr, cnaidta.dateeffect as maxdate, isnull(cast (pthproto.pthdbo.cnaaddr.prefix1key as varchar (50)),'') + ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix2key
as varchar (50)),'')+ ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix3key as varchar (50)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.houseidkey as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component1
as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component2 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component3 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component4
as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component5 as varchar (100)),'') as mailaddress, row_number() over(partition by pthproto.pthdbo.cnarole.tpkcnarole order by cnaidta.dateeffect desc) as rn into #address from pthproto.pthdbo.cnarole
inner join pthproto.pthdbo.cnaidty on cnarole.tfkcnaidty =cnaidty.tpkcnaidty inner join pthproto.pthdbo.cnaidta on cnaidty.tpkcnaidty = cnaidta.tfkcnaidty inner join pthproto.pthdbo.cnaaddr on cnaidta.tfkcnaaddr = cnaaddr.tpkcnaaddr order by cnaidta.dateeffect
select *, case when mailaddress is not null then mailaddress else formataddr end as test from #address where tpkcnarole = '18306695'
The case when statement is struggling with how i have created the column mailaddress. As it does seem to understand when it is null. In the example I have got there is no value in any of the columns to create
the mailaddress. Hence why I am referencing it from elsewhere. Due to having a way on the system where it picks up data from 2 different places. The mailaddress is always correct if there is one, hence why
trying to reference that one first. So how do i change this case when statement to work ?

It's ok I have fixed my own problem
when
(mailaddress
is
null
or mailaddress
=
then formataddr
else mailaddress
end
as test
case

Active state not working in scrolling site (with anchor links)

I'm design a scrolling site with anchor links and an horizontal menu on the top.
when i publish the site and click on the menu buttons the site scrolling to the place of the anchor but the active state in the menu is not working.
now... when i leave the main page (were the scrolling site is) and then return back to it all active states are working perfectly
anyone have this bug? or any one know how to fix it ?

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Import/Export statement not working..

Hi all,
   I want to export some data from BADI & Import it back in user exit.
I wrote following line of code in BADI
       export P1 FROM xstr to memory id 'ZABHI'.
& following line of code in User Exit
      import P1 to xstr FROM memory id 'ZABHI'.
After export sy-subrc becomes 0 hence export statement is working fine but when aftr import xstr remains blank.(sy-subrc = 4)
I tried to execute same code in single ztest abap program & it works fine there.
Thanks in advance.

hi abhijeet,
you are most welcome....
to delete, use
** deletes the data to save wastage of memory
delete from database indx(xy)
client sy-mandt
id 'ZABHI'.
you need to delete it coz, its available to all programs in the R/3
server via the ID and you don't want anybody to view the data u are
sending into memory.
the statement that u used earlier was program specific and hence
not accessible to the user exit.
Regards,
Samson Rodrigues.

Hide statement not working

Hi experts,
i am using hide statement but it is not working..The problem with it is that after line selection the variable on which i have used hide is carrying the last value of internal table always..<< Removed >>
Regards,
Raman
Edited by: Rob Burbank on Jun 30, 2009 10:41 AM

I am sending a test program with same problem...iin this after line selection the field variable emp-name is displayin only last entry of internal table...
*& Report ZBASICX12
REPORT ZBASICX12.
INITIALIZATION.
DATA: BEGIN OF ITAB OCCURS 0,
        EMPID TYPE ZTEMP-EMPID,
        EMPNAME TYPE ZTEMP-EMPNAME,
        END OF ITAB.
START-OF-SELECTION.
SELECT EMPID EMPNAME FROM ZTEMP INTO TABLE ITAB.
SORT ITAB BY EMPID.
LOOP AT ITAB.
    WRITE: / ITAB-EMPID HOTSPOT.
    HIDE ITAB-EMPID.
ENDLOOP.
END-OF-SELECTION.
AT LINE-SELECTION.
CASE SY-LSIND.
    WHEN 1.
      WRITE: ITAB-EMPNAME.
ENDCASE.

UPDATE statement not working

Hi,
I want to modify the record of PA0009 .I want to change the enddate of personnel No.
UPDATE PA0009 SET ENDDA = '30.10.2009'
WHERE PERNR = '1'
AND BEGDA = '01.09.2008'.
The above statement is not working. How to modify the enddate which is part of key table.
Please guide.
Thanks and Regards
K Srinivas

Hello,
Set the data format to the internal date format (YYYYMMDD), so in the set and the where clause pass '20091030' as ENDA which is to be changed and BEGDA in the where clause as 20080901. Also if the after the changes if the key combination results in dupicate records then the update will faiil. Just make sure that the combination of PERNR,SUBTY,OBJPS,SPRPS,ENDDA, BEGDA and SEQNR remains unique, if a record exists with this combination then sy-subrc will be 4 and the record will not be updated.
Regards,
Sachin

Collect statement not working

Hi,
My collect statement is not working. Kindly let me know what is the other way to add one filed in the loop.
thanks
Moderator message - Please ask a specific question - post locked
Edited by: Rob Burbank on Nov 19, 2009 9:24 AM

Same thing i faced few days ago --. i have resolved this using following logic ... try this it will workout
CLEAR: wa_mkpf_mseg, w_werks, w_matnr, w_lgort, w_bwart.
LOOP AT t_mkpf_mseg INTO wa_mkpf_mseg.
IF wa_mkpf_mseg-werks EQ w_werks AND wa_mkpf_mseg-matnr EQ w_matnr AND wa_mkpf_mseg-lgort EQ w_lgort AND wa_mkpf_mseg-bwart EQ w_bwart.
CLEAR: wa_p_coi.
READ TABLE t_p_coi INTO wa_p_coi WITH KEY werks = wa_mkpf_mseg-werks matnr = wa_mkpf_mseg-matnr lgort = wa_mkpf_mseg-lgort bwart = wa_mkpf_mseg-bwart.
IF sy-subrc = 0.
wa_p_coi-Avg Days = wa_p_coi-Avg Days + wa_mkpf_mseg-Avg Days.
MODIFY t_p_coi FROM wa_p_coi TRANSPORTING Avg Days .
CLEAR: wa_p_coi, wa_p_coi.
endif.
ELSE.
wa_p_coi-werks = wa_mkpf_mseg-werks.
wa_p_coi-matnr = wa_mkpf_mseg-matnr.
wa_p_coi-bwart = wa_mkpf_mseg-bwart.
wa_p_coi-lgort = wa_mkpf_mseg-lgort.
wa_p_coi-Avg Days = wa_mkpf_mseg-Avg Days .
APPEND wa_p_coi TO t_p_coi.
CLEAR: wa_p_coi.
ENDIF.
w_werks = wa_mkpf_mseg-werks.
w_matnr = wa_mkpf_mseg-matnr.
w_lgort = wa_mkpf_mseg-lgort.
w_bwart = wa_mkpf_mseg-bwart.
CLEAR: wa_mkpf_mseg.
ENDLOOP.

MDX simple case statement not working?

hi all - any idea what is wrong with this MDX statement? it is returning blank. I am trying to add a calculated measure using the below code but it is not working. thanks for the help.
CASE WHEN [Accounts].[Account Name].CURRENTMEMBER = "Cash" THEN
([Dates].[Hierarchy].currentMember.lastChild, [Measures].[Measures].[Amount]) END

If you are checking for the 'Cash' member of the Account Name hierarchy, do you need to do something like this?
CASE WHEN [Accounts].[Account Name].CURRENTMEMBER IS [Accounts].[Account Name].[Cash] THEN([Dates].[Hierarchy].currentMember.lastChild, [Measures].[Measures].[Amount]) END
Regards,
MrHH

SQL Statement not works using functions or subqueries-MAXDB

Hello All,
I created an ABAP program to select information about country(table: T005) with the country names (Table: T005T). I tried to create a sql query with a sql subquery to select everything but for some reason that I don't know it doesn't work. Please find the query below.
DATA:
resu        TYPE REF TO cl_sql_result_set ,
stmt         TYPE REF TO cl_sql_statement ,
qury        TYPE string .
           qury = `SELECT land1, spras, `
           &&       `(SELECT landx `
           &&         `FROM SAPNSP.T005T `
           &&         `WHERE mandt = '` && sy-mandt && `' `
           &&           `AND spras = 'EN' `
           &&           `AND land1 = ? ), `
           &&       `(SELECT natio `
           &&         `FROM SAPNSP.T005T `
           &&         `WHERE mandt = '` && sy-mandt && `' `
           &&           `AND spras = 'EN' `
           &&           `AND land1 = ? ) `
           &&        `FROM SAPNSP.T005 `
           &&        `WHERE mandt = '` && sy-mandt && `' `
           &&          `AND land1 = ? `
           &&        `GROUP BY land1, spras` .
resu = stmt->execute_query( qury ) .
Well, the query above works but the fields LANDX and NATIO are in blank in ALL THE CASES, even with information registred in table T005T.
So, exploring the SDN forum and after read some documents regarding ADBC, I create a function to handle this sql select and get the correctly the missing informations, but, still don't work. Please find the function below:
CREATE FUNCTION select_landx (land1 CHAR(3)) RETURNS CHAR(15)
AS
VAR landx CHAR(15);
DECLARE functionresult CURSOR FOR
SELECT spras, land1, landx
     FROM SAPNSP.t005t
     WHERE spras = 'EN'
         AND land1 = :land1;
     IF $count IS NULL THEN <- | $count is always 0, my SELECT
       BEGIN                                 it's not work but I don't know why
         CLOSE functionresult;
         RETURN NULL;
       END
     ELSE
       SET $rc = 0;
       WHILE $rc = 0 DO
       BEGIN
         FETCH functionresult INTO :landx;
       END;
     CLOSE functionresult;
     RETURN landx;
Calling the function in a SQL statement:
DATA:
resu        TYPE REF TO cl_sql_result_set ,
stmt         TYPE REF TO cl_sql_statement ,
qury        TYPE string .
           qury = `SELECT land1, spras, select_landx(?) landx `
           &&        `FROM SAPNSP.T005 `
           &&        `WHERE mandt = '` && sy-mandt && `' `
           &&          `AND land1 = ? `
           &&        `GROUP BY land1, spras` .
resu = stmt->execute_query( qury ) .
Any comments ?
Best regards,
Arthur Silva

Hello,
Thank's a lot, it works. It's funny because the given solution works using only abap codes.
It may be happens because the abap interpretor send the sql statement to the db interface that handle the code in the another way.
Thanks again, it was driving me crazy.
Best regards,
Arthur Silva

Merge statement not working over db link

I have a merge statement that works fine when it's run against a local table, but when I try to run it against a table over a database link, I get the following error.
ERROR at line 1:
ORA-01008: not all variables bound
ORA-02063: preceding line from REPOS
ORA-06512: at "DBADMIN.PING_DB", line 6
ORA-06512: at line 1
Here is the code:
create or replace procedure ping_db
as
begin
merge into availability@repos A
using (select trunc(sysdate) from dual)
on (trunc(A.day) = trunc(sysdate))
when matched then update set A.uptime = A.uptime + 1
when not matched then insert (hostname,dbname,day,uptime) values
(utl_inaddr.get_host_name,sys.database_name,trunc(sysdate),1);
commit;
end;
/Code compiles fine, but gets the error when it's executed. Any help would be appreciated.

9.2.0.x is the version (9.2.0.4,.5 and .6)

Balance Sheet Statements not working

Hello,
I have deployed the standard scenario for the Balance Sheet statement, but unfortunately when I execute the query, the balance dependencies in the FS hierarchy are not working. They don't appear in the hierarchy nodes. I have a difference in my balance sheet due to these missing financial statements.
I have activated 0figl_vc1, 0figl_c01 and the flow before the cubes.
Any idea about what is happening?
Best regards
Sérgio

Hello Sérgio,
In that program are you using in the "Financial statement version" parameter the same one that you're using in BW?
Be sure of that.
Also compare with others "Financial statement version" (but always comparing the same between systems) to see if the result is ok.
You should be comparing the totals and not the subtree. If the totals are ok, the hierarchy is constructed different between systems. Compare the hierarchy.
Also for the most detailed difference you'll find compare with the data in cube 0FIGL_C01 and not the 0FIGL_VC1 to see if there the data is ok.
Diogo.

Why would menu button's active state not work? Regardless if I import PSD button or use menu widget from the widget library.

I am using Adobe Muse CC (up-to-date) and tried to troubleshoot the following: Menu button's active state is not working, both on preview and after publishing. I tried many ways to place menu-designed buttons myself using photoshop and used widgets library (buttons, compositions, menus,etc.). Lastly, in regards to buttons, one of my menu buttons appear clear and crisp (psd button) and all others are blurry (though designed,saved and imported the same way);what could be the problem? Can anyone help?Thanks.

That line is for pop up message?You would typically use a tool tip for that.
The "Accessibility" features are different and I believe you need additional software to take advantage of them:
http://java.sun.com/j2se/1.5.0/docs/guide/access/index.html

Object state not working on android

Hope someone can help.
We use a + sign to indicate there is more information, using object states to move between these 2 elements, however whilst these work fine on iOS devices, when the same files are built for Android these states do not work.
Press one of the + signs and it just vanishes, without going to the new content.
Any clues, please.

Are you using the legacy AIR viewer or the native Android viewer? Try the new native Android viewer instead. https://helpx.adobe.com/digital-publishing-suite/help/building-android-apps.html
Neil

Rollover states not working when published online. Suggestions?

I have created rollover states for image navigation. Works great in preview. Works great when published to desktop. I have uploaded to FTP site. Some of the rollovers work, others do not.? I have replaced and re-uploaded, still not working. The normal and active states all work, but the rollover state vanishes. The images are in the image folder. The css pages do have the code to swap the images. Same issue in Chrome, Safari, Firefox, and on ipad.
What am I missing? Thank you for your help!

What's the URL?

*XDIM_REQUIRED statement not working

Similar Messages

Maybe you are looking for