XGL: Actual situation

Hi all.
I would explain the progress of situation about xgl and compiz.
1 - We have, since September, white screen with compiz and xgl, or beryl and xgl. It seems to be fixed; please, check your compizrc and startxgl ( in new xgl-git 20061126 startxgl is fixed ), because now I use the following command:
LD_LIBRARY_PATH=/opt/mesa-xgl-cvs/lib/ LD_PRELOAD=/opt/mesa-xgl-cvs/lib/libGL.so.1.2 compiz --replace --indirect-rendering --strict-binding --use-cow miniwin decoration transset state wobbly fade minimize cube rotate zoom place scale move resize switcher trailfocus water bs &
to start compiz.
With this, I'm not get the white screen of the death.
I've updated the wiki.
Please, can you post your feedback on this?
2-With new version of mesa-xgl-cvs, we need new version of libdrm ( see http://bbs.archlinux.org/viewtopic.php?p=210800#210800 ).
Until libdrm 2.3.0 goes in current, please use my version of libdrm ( you can find it in my repo -simply pacman -Sy libdrm ).
Rember: Your Feedback is important
Please,reply with your brain ( I wouldn't read 'hi, i don't see anything with compiz' but a serious reply, like 'hi, i have this error:....' )
Good Luck!
ps - wait cron update of my repo ( 07 PM GMT ) to see all modify.

I can't seem to download the libdrm 2.3 package. I have your repo in my list and doing a pacman -Sy libdrm just gives me this
[root@arch eric]# pacman -S libdrm
:: libdrm-2.0.2-1: is up to date. Upgrade anyway? [Y/n]
Doing a pacman -Syu of course gives me an unresolved dependency
[root@arch eric]# pacman -Syu
:: Synchronizing package databases...
:: current is up to date
:: extra is up to date
:: unstable is up to date
:: community is up to date
danimoth [################] 100% 1K 15.0K/s 00:00:00
papercut [################] 100% 0K 1.5K/s 00:00:00
error: unresolvable dependencies:
mesa-xgl-cvs: requires libdrm>=2.3 but it is not in the sync db
So basically I'm not sure what to do. I checked but there is no libdrm in the AUR. Is it possible you could put this package in the AUR so that we could more easily obtain it?

Similar Messages

Actual situation about the stocks of ipad 2 in Italy

Hello! As above, how is the actual situation about the stocks of ipad 2 in Italy? Thank you very much in advice!

iPads are in scarce supply everywhere in the world, and stock usually sells out without hours of arriving at the reseller. If you want current information about availability, you'll have to contact your local Apple Store or Apple dealer.
Regards.

Project planing compare with actual situation

Hello all,
I have following questions:
1. Is there a possibility to see in the GANTT chart both the projected and real duration of a task/phase, ideally two rectangles for each component - similar to MS Project for example?
2. Is there any possibility to automatically update scheduling of dependent tasks when the actual duration of a task is different from the planned duration? After the phase is released, items are no longer scheduled automatically...
Thanks very much
Marcel

Hi,
to question 1:
As long as the task is not completed, you will see the percent completed in a different color on the task. Once the task is completed, the GANTT chart shows the actual start and finish date. So in the GANTT chart, you don't see planned and actual.
Question 2:
You are correct, once released it will not schedule automatically any more. I guess, there is a class method for scheduling out there which could be called in a BadI. Maybe Bjoern knows more about it....
I know, this is not too helpful, but that's it how it works in standard.
Regards,
Jochen

XGL/Beryl - Damn slow and unstable

Hi,
I know, Beryl is quite unstable, but seems it works for so many guys, why not for me?
I followed this instruction: http://bbs.archlinux.org/viewtopic.php? … hlight=xgl
I have a Radeon 9600 and get KDE to work with XGL actually, but when I try to configure Beryl, the manager is so damn slow. And also the speed in general is very slow and after a while it crashes completely.
I have a Centrino 1.5GHz. This is not enough for the cool effects??
Im using fglrx btw. This is important?
Sorry if I ask for stupid "unstable-support", but I really want to know if its a stability problem of the software or if I made a mistake in my configuration.
Thanks in advance...
EDIT: When I use XGL as a session on KDE-Startup, the screen is white only and my notebook crashes (mouse still works)

glxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
kwin: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
beryl: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
Then I installed the mesa-package:
compiz: No GLXFBConfig for default depth, this isn't going to work.
compiz: Failed to manage screen: 0
compiz: No manageable screens found on display :0
The window decorations are not visible.

Voice Memo won't sync on new Centro

hi, i've been reading about this problem on the forums, and i tried the fix where i disabled the conduit for voice memo, but i'm still getting an error message when i try to synch. any ideas? i like this feature a lot, especially since i lost the notepad when i changed from my old palm.
thanks!
Post relates to: Centro (AT&T)
This question was solved.
View Solution.

Hi
I've just discovered this problem and have not been able to even transfer the audio recordings to the mini SC card where at least I could have stored the file and kept it safe. I can't email them to myself because it crashes the phone every time. Beaming them using bluetooth doesn't work either. I've read the previous thread and there wasn't a solution listed there but the thread is very ol, going back to 2007.
I was present when a criminal threatened a street resident. The resident stood up to the guy. I recorded the conversation because I was right beside them. Now he's been hurt and if I come forward, aprt from the obvious problems, I'm going to have to give them my phone as evidence rather than a copy of the recording. That could leave me without a phone for months. I'll do it if I have to but you can imagine it would be very serious. This isn't a sob story. It's the actual situation.
I'm seriously looking for a solution. Have there been any further developments regarding this. I really need to give them a copy rather than the phone.
Tom
Post relates to: Centro (Unlocked GSM)
Post relates to: Centro (Unlocked GSM)

Voice memo won't sync

I have a voice memo on my ios 7 iphone 4S, i synced it to my itunes on my imac, but right after that happened I had an error message where iTunes couldnt save the library file. I was able to solve that problem but when I fixed iTunes, it reverted it back to an older "library" before the voice memo was saved. So now I cannot resync that memo to my computer. It seems to think it already synced so it won't transfer it again. How do I transfer the voice memo to my itunes library, ideally without using third party software.

Hi
I've just discovered this problem and have not been able to even transfer the audio recordings to the mini SC card where at least I could have stored the file and kept it safe. I can't email them to myself because it crashes the phone every time. Beaming them using bluetooth doesn't work either. I've read the previous thread and there wasn't a solution listed there but the thread is very ol, going back to 2007.
I was present when a criminal threatened a street resident. The resident stood up to the guy. I recorded the conversation because I was right beside them. Now he's been hurt and if I come forward, aprt from the obvious problems, I'm going to have to give them my phone as evidence rather than a copy of the recording. That could leave me without a phone for months. I'll do it if I have to but you can imagine it would be very serious. This isn't a sob story. It's the actual situation.
I'm seriously looking for a solution. Have there been any further developments regarding this. I really need to give them a copy rather than the phone.
Tom
Post relates to: Centro (Unlocked GSM)
Post relates to: Centro (Unlocked GSM)

Yahoo Mail push problem with stock email app

It is nice to see that Verizon is offering push services for yahoo mail (and possibly for others as well, I only tried yahoo) on select phones now, the Droid Charge being one of them. If you add a yahoo account in the stock email app, it configures it through "Verizon email gateway server" and the messages will be pushed to the phone just like gmail had been, and you will get your new messages almost instantaneously.
I previously had an htc incredible and that phone did not have that feature. My e-mails were being checked at an interval that I could select, but not pushed.
What this email gateway does is (as I understand it): 1) your phone sends your credentials to the gateway server where they are stored, 2) the server connects to yahoo mail servers with your credentials, and 3) whenever there is a new message, the gateway server retrieves and pushes it to your phone, in other words it pretty much acts as the middle man that has a notification capability. The gateway server only accesses your inbox folder and it only does incoming services. For other things such as sending messages or checking other folders, your phone connects to yahoo mail servers directly. My incredible on the other hand used to connect to yahoo mail servers directly for everything including inbox access and unfortunately those servers do not have the push capability to mobile devices.
I got the Charge over two weeks ago and enjoyed push on yahoo for about ten days. But then suddenly it stopped working. It would no longer update my inbox even when I selected refresh through the menu. If I went into other folders, they would update and I could send emails. However, my inbox would not update. I waited a day, then I went into settings/apps/manage apps and deleted the cache and data of the mail application to fix a possible glitch. (It works on the market app when all of your downloaded apps disappear from the list every once in a while due to a glitch)
I ended up with a blank inbox that couldn't download any of the messages. Then I removed the yahoo account and tried to readd. Now I get the "Fetching mailbox failed, retrying. . ." error and sometimes it retries for up to a half hour (until I manually stop it) or sometimes it says "Unable to connect to server" after a couple of minutes.
Following is a list of things I tried:
1) Set up a different Yahoo account:
Works without a glitch, push enabled
2) Try the original email account with wrong password:
Gives a credential error, so password authentication is not the problem
3) Manual configuration through selecting "Others" rather than "Yahoo Mail" in the add account menu:
Unchecking "Use Verizon email gateway" makes it work, but without push. My phone is able to connect to Yahoo servers directly with the same exact settings
I am pretty sure the problem is with the Verizon gateway server having a glitch with my email account. So someone in charge of that server has to go through the list of accounts set up and either reset or delete mine, so I can set it up again through my phone.
I called Verizon support the other day and finally talked to a level 2 rep after having to do the restart, take battery out and all that nonsense. It took them a while to understand the actual situation. It's not their fault really, my problem is complicated and a level 2 rep simply does not have that kind of knowledge. They tried to connect me to Samsung representatives, which was a waste of time, because there is nothing wrong with the hardware as it works with a different yahoo account with no problems, and it also works when connecting to yahoo directly. After spending two and a half hours on the phone, and after the rep talked to her supervisor and the samsung reps to learn more about the verizon gateway server, she finally told me I was right about the issue, and assured me that they would fix it and call me within two hours.
It has been two days, I haven't heard a thing.
What frustrates me is that there wasn't a single person there who could even grasp what could be causing the issue. They had never heard about the email gateway, I had to explain to them. I am not mad that the level 2 rep or her supervisor didn't know, but I am pretty **bleep** that they could not put me in touch with a person who did.
I know there is at least one person at Verizon who manages the gateway server, but the question is how can anyone contact him???
Verizon keeps offering these new services that are really cool for the most part, but their support system is very disconnected from their engineers/technical staff. The customer service is unable to fix problems other than billing issues, and their answer for everything else is to "take the battery out and restart the phone".
For now, I set up my account manually, without the Verizon email gateway, so I don't have "push" working. It's a shame because it is such an easy thing to fix only if I could get in touch with the right person.

UPDATE:
After waiting for about ten days, I tried setting up my e-mail the regular way (by selecting yahoo mail) again yesterday. To my surprise, it went through without a glitch. I guess the cache of the gateway server must have been reset.
I have been enjoying push for yahoo mail for the last 24 hours again. But I just noticed now, that the problems might be starting again. There are recent e-mails that don't show up on my phone, but do through yahoo's web mail page. When I select "refresh" through the menu on the phone, I see the circle in the top corner spinning for as long as I wait, but the e-mails don't get downloaded. That is exactly how my problems had started in the first place. I will give it the benefit of the doubt and wait and hope that it fixes itself.
There might be a compatibility problem with yahoo servers and the verizon email gateway because I have two gmail accounts set up with the stock e-mail the same way, both using verizon's gateway server for push, and they have both been working with no problems for almost a month. (Even though sometimes the "push" is delayed by up to 5-10 min, most of the time it is within a couple of minutes and that's fine, I'm not that picky) And when I do "refresh", ti only takes a few seconds to complete the request.
And I still haven't heard anything from Verizon.

What should I do? Has other people's Support been this bad?

My name is Mile Marjanovich and I am an unhappy Verizon Wireless customer.
I have been a customer since October 2004 and finally after 7 years I think it's time to call it quits with this company. Their network may have been one of the most reliable in the past compared to the competition but in the end it was the customer service and the literal lies that their employees have told me which made me call it quits.
And here's how it ended keep in mind none of the details have been exaggerated nor embellished this is the actual situation and times in which this has transpired.
On September 7th 2011 at 2130 me and the wife bought 2 Motorola Droid Bionics using our last "New Every Two" sale, we purchased 2 Bionics, 1 Lapdock, 1 Car Dock, 1 Bluetooth Earpiece, 1 Car charger, roughly totalling $1200 in purchases, with our rep telling us there would be $100 rebate for the lapdock and that our existing Droid 1 & Droid 2 could be turned in for even more credit to offset the cost. Expecting these phones to live up to the standards of quality that motorola had given us with both the Droid 1 (2 purchased December 2009) and the Droid 2 (1 purchased in June 2010) we were excited. We were not new to the Android family nor to Motorola products before purchasing these so it's not a first time bad experience situation.
On September 12th 2011 at 1200 the phones arrived, to start with they wouldn't activate, through 2 calls of technical support and excuses along the longs of "its such a popular phone right now our activation servers are busy so just keep trying" we finally got them activated in about an hour and a half later.
On September 15th (our billing cycle date) we noticed that the $100 credit for the lapdock had still not been applied nor had we received a $100 Verizon gift card yet.
On September 22nd I called Verizon opting to finally use the 14 day no worries hassle free guarantee and return the phones which in the first 9 days experienced, 3g/4g service interupts, applications uninstalling themselves, missed calls, dropped calls, extraordinarily short bettery lifes (under 4 hours with little to moderate usage). We I talked to Verizon they informed me that it was past the 14 day mark and we could not exchange, as it started from the time we ordered the phones not the time we received the phones. So the 5 days it took to get the phones was part of our "Testing time".
In late September 2011, I had finally received the boxes and prepaid shipping labels to send the Droid 1 & Droid 2 into Verizon for the credit program and sent them the phones.
In October 15th, 2011 (Billing cycle date) we had still not received and credit for the lapdock, the droid 1 or the droid 2, and our phones were replaced the first time after my wife's Bionic developped a strange clicking noise in the speakers anytime any audio was played and my Bionic had began to drop calls regularlly.
In late October 2011, the first Bionic that arrived to replace the wife's was faulty, the Power Switch wouldn't depress and you couldn't turn the phone on.
A couple days later in October 2011 another bionic arrived and besides the 3g/4g data issues at least turned on.
Throughout November 2011 our phones were replaced for the following reasons, 1 the external speaker didn't work, 1 the sim card slot didn't work, 1 had a charge that lasted only 22 minutes from full to shutdown, 1 constantly crashed no matter which google app you tried to use, 1 the gps didn't work, 1 the Wifi/Bluetooth/LTE services didn't work, 1 arrived with a metal sliver sticking outta the bezel in the upper left hand corner of the phone which actually cut my finger open when I went to turn the unit on once, 1 only had 3g functuality and the Verizon rep said that the database on their end showed it as a "Unknown Device" and thus he couldn't fix it. During all of these repairs, returns, etc each "Factory Certified Like New Device" showed up with glitches, errors and other non-working features and with an average of 60 minutes a call to tech support each day for Activation issues and troubleshooting, Verizon kept telling me that when Motorola would release "The Patch" it would all fix itself.
November 15th (Billing Cycle) still no rebate/credit for lapdock, or traded in phones, after a couple calls and them "Researching the problems" they figured out that the $100 lapdock rebate was only from September 8th-October 15th, and although the Verizon website on the 7th of September showed the deal and the Verizon rep that sold me the phones told me about the offer I was not elligible since I ordered the phones 2 1/2 hours early. Through a pile of additional calls they finally said sorry and credited me $100 for the lapdock. So issue #1 of 5 had been solved (3 rebates, 2 broke phone) 20% progress.
December 15th, 2011 - Received a $70 credit on my account (Droid 1?)
Continuing into December of 2011, we continued to replace phones and battle customer service, even went to far as to actually post a review of the phone on Verizon's websites with the issues we've had and awarded the phone a single star (The review was deleted) as well as an additional 2 bad reviews (always deleted after being posted to their website) and then one day things changed...
On December 16th around 1800, I spoke with Mark (Technical Support Supervisor) for Verizon and he made me and my wife and offer, he looked at the notes and the logs and the troubles we had been having with the phones and offered to replace the device with a comparable model. My only request was ANYTHING but another Motorola phone. He offered the HTC Rezound and the Samsung Galaxy Nexus. I told Mark, since I have only ever had Motorola Droid Products I don't know which one of those were better and asked him, what HE would get as he was going to know Verizon's product line better than myself. He said the Nexus, he hadn't received any calls on it, it was a new phone, great reviews, etc. I agreed to the offer, he told me that since it was going to be a warranty replacement the phones would be certified like new and that the most difficult part in getting used phones is usually locating the batteries and the battery backs. After another 10 minutes or so of him looking things up he told me the phones had been ordered and we would be receiving 3 boxes from fedex, 2 boxes would each contain one Nexus and one box would have the batteries and the backs. I asked Mark how to ship the phones and what should I do with the incompatible accessories (1 Bionic Lapdock & 1 Bionic Car Dock) seeing as verizon does not accept accessories for trade in credit. He advised me to sell the parts on Ebay or Craigslist or something to buy the new parts for the Nexus.
On December 17th (Saturday) I managed to sell the parts for enough to get the Nexus Dock.
On December 19th (Monday) I received 4 packages from Fedex, 3 Bionics, and one box containing 2 Samsung Galaxy Nexus Batteries, and 2 Samsung Galaxy Nexus Battery Backdoors. I called Verizon to figure out where the Nexus's are and why I had a 3rd bonus bionic here and was informed that Mark never actually ordered it and they were confused as to why he would offer it when there is no used inventory. The double checked the notes on their system and verified he did actually offer it and Alice (an amazing CS rep) said that she would check inventory every tuesday and thursday and send me a text message with the inventory status (and to this day she still does, like she promised).
On December 20th (Tuesday) Mark called me to appologize and say he cannot order the phone as there is no inventory and sorry for making the offer. He said he was shipping me 2 Motorola Droid Razr's that would be here on Wednesday, and that these were great phones, no issues, never have to be replaced, etc. After I got off the phone with him I immediatly called Customer Service back and tried to figure out how my one request had been ignored again and why they couldn't fufill the offer. Michelle (another very nice rep) said sorry, she doesn't know why he offered and then retracted but told me to "Just give the Motorola Razr's a chance" there great phones and seriously no issues.
On December 21st (Wednesday) 1400, I received 2 Motorola Droid Razr's, as my wife was working I didn't want to try and activate her's while she was at work and mess with her service I went through the invoices and grabbed the one attached to my line and tried to activate it. The Razr sent to me had a couple issues, #1 It kept getting a "Sim Card Authorization Error, please contact customer service" #2 Wifi wouldn't work #3 LTE service wouldn't work #4 the phone would randomly restart itself every couple of hours, #5 it fluctuated between no service for literally hours at a time to "Unknown Carrier" messages. I made 6 calls over the 24 hours I had the phone and the issues were still not resolved, and remember this was "The phone with no issues, trust us, you'll love it, just give it a chance". My wife's line on the other hand after 30 minutes of customer service and resetting the IMEI in the database and the reinputting the SIM card on verizon's end they finally got her's working and what do ya know it's great... Mine on the other hand was still not functional.
On December 22nd (Thursday) I contacted the West Region Executive Management team, and technical support explained 3 months of history, issues, number of replacements etc, and my rep said they were sending out a HTC Rezound, finally listening to my "Anything but a Motorola" request and that I would receive it on Friday (Dec 23rd)
On December 23rd (Friday) I spoke with Liz, West Region Executive Management Team representative, who after looking at my account for last couple months, looked into the HTC Rezound I was going to receive later today and said good news, it looks like it was a unit returned after just one day, so it wasnt a defective unit or anything, should be great... feeling reassured that Verizon had finally sent me a good working unit I waited. At 1800 hours I received my fedex shipment and opened the box to find... a Motorola Razr, I have had the Razr now for 3 hours and 7 minutes... it will not activate, it keeps failing, it has been reset twice, i have swapped SIM cards, still not activating...
... at least my wife is working... too bad for me apparently 12 Motorola Droid Bionics, and 3 Motorola Droid Razr's are just the beginning of this game...

Unfortunately, most of my advice is in the "hindsight is 20-20" category.
First off, I would never have purchased the peripheral accessories until the 14 day return period had expired. Second, you learned the hard way what the "14 days" really means.
Too bad you didn't do any homework, reading this and other forums and tech sites. Even word of mouth from others. That, more than anything could have steered you towards different phone choices from the get-go and I will leave that there with no further comment other than to say most of the issues you described have been discussed in this forum, ad nauseam.
Once you got into the refurbished phone exchanges, that is where things really went haywire. What someone tells you over the phone is a sketchy proposition, and when it comes down to it, it's your word against theirs.
I think Verizon tried to make it right, though. Remember, they don't make the phones. Don't throw the baby out with the bathwater.
You stated yourself you were a satisfied Verizon customer before this. Had the first two phones performed as they should, you would still be a satisfied Verizon customer.
Doubt any of that will make you any happier, but after you went through the effort of writing such a long post, I thought I'd try.

Does the 4th GB of RAM makes any senses in the nem MacBook Series?

Risking to start a neverending troll, and risking, the topic was discussed in exteso earlier, I have to admitt that I am a little bit ****** about a company that merchendizes computers with larger RAM-possibilities than the CPU can handle (to my knowlwedge also RAM doesnt grow on the floor for free...). And in particular, have their local dealer to sell those 4GBs w/o mentioning this limitation (Dataquest company Zurich Switzerland). I actually was so noobish, that i have built in 4GB of RAM in my Dual 2.16 17" 3 months ago, unfortuneately it went broken yesterday, so i wont be able to do any checks myself. The following english statement of Apple dates to October 26, 2006, so maybe it was kinda a 'childhood sickness' that has be fixed in the meantime, and my investement in the 4th MB wasnt for nothing.
What makes me more suspicious is the fact that in the german translation of the topic, which dates to the June 07, 2007, this limitation to 3GB RAM for MacBook Pro (with 4 built in) is still mentioned. Well, because my poor Dual did only survive 3 monthes (dont let em drop on concret floors, Steve Jobs wont give u a new one, although he argued, the comp would survive the drop w/o any scratch...) i need a new one and i wanna be informed about the actual situation at the RAM's front best.
*Does anybody know, do the newest models of MacBooks not only accept 4GBs of RAM, but can they also access them all?*
+The MacBook Pro (15-inch Core 2 Duo) and MacBook Pro (17-inch Core 2 Duo) notebooks have two SDRAM slots in the bottom of the computer, and they come with at least 1 GB DDR2 SDRAM installed into the bottom slot.+
+Although these notebooks will accept up to a 2 GB SO-DIMM in each of the two memory slots, the MacBook Pro will only support 3 GB total memory. If you want to maximize the amount of SDRAM in your computer, install a 2 GB SO-DIMM in one slot and a 1GB SO-DIMM in the other.+
+You can use Small-Outline Dual Inline Memory Modules (SO-DIMMS) that meet all of these criteria:+
PC2-5300
unbuffered
nonparity
200-pin
+667 MHz+
+DDR2 SDRAM+
+You can use RAM module sizes of 1 GB or 2GB in the top or bottom slots.+
+DIMMs with any of the following features are not supported in the MacBook Pro (Core 2 Duo) notebooks: registers or buffers, PLLs, ECC, parity, or EDO RAM.+
+Note: If you do install a 2 GB SO-DIMM in both the bottom and top memory slots of the notebook, the About This Mac window and Apple System Profiler will both show that you have 4 GB of SDRAM installed. However, Activity Monitor and other similar applications will reveal that only 3 GB of SDRAM has been addressed for use by the computer.+
*Kindly, Dhura*

Yes, the latest 2.2 and 2.4 models can see and use 4gb of ram.
The previous model can see 4 but only use 4 maximum - this applies to all Core 2 Duo machines pre-dating the latest ones which are based on the intel "Santa Rosa platform".
The original Core Duo machines could only see 2gb.
These are limitations of the intel chipsets - not of the Apple MacBook Pro per se.
Best of luck.

Incoming orders key figure / booking

Hello together,
I am new to SAP.
Together with a group of colleagues we have to solve several tasks in the SD Module. Most of them are done. But with the CO-Integration we are struggling. We are looking for the key figures with are created when you save an incoming order (total order value?). Can you tell us where we can find this figures as well as the corresponding bookings?
The second point is the target/actual situation of an order position. Is this the structure which you get if you click on the status button in VA02 /VA03? If yes where is the connection to CO, if not where could we find the target/actual comparison.
Thank you
Jan

Hi Eduardo,
thank you for your quick answer. We are solving this tasks in the IDES system for training purposes - the function itself should be activated. Do you know where we can find the posting of the incoming order (in the SAP Easy Access, not in IMG)?
For clarification purposes the translation of the tasks:
1. when saving an sales order the "incoming order value" is posted to the CO. Where can you find it?
2. Where can you find the plan/actual comparison on an order position?
Thank you
Jan

Need help to display geo-characteristics on a map in SAP BW report

Hello all,
Currently I am struggling to display plants on a map of Germany in a SAP BW report, using dynamic geo-characteristics in SAP BW. We do not have the ESRI software ArcView (my superior does not want to buy it), so I have to be successful without it.
The actual situation now is as follows: For the map of Germany I use shape g_stat00.shp. In g_stat00.dbf in column SAPBWKEY there are the values DE/01, DE/02 DE/16. SAP-help tells me that 0POSTCD_GIS is used as attribute for the dynamic geo-characteristic plant. In the master data table of 0POSTCD_GIS the following data is present: ZIP-code, geographical longitude and latitude. To correctly display the map of Germany in a SAP BW report I include the characteristic 0COUNTRY in the rows of my query. Well, I see this map in my report.
But the following problems remain and I have no clue how to proceed:
- I do not see the individual states of Germany on the map, just the federal republic in total. What must I do to see the individual states?
- How can the plants of our company be displayed on the map? As soon as I include 0PLANT together with 0COUNTRY in my query I do not see the map any more!
SAP helpt tells me in the context of interactions with maps that the following preliminaries must be fulfilled: In the HTML code of the web template the following lines of code must be adapted to individual system requirements:
Example:
<param name=IMAGEMAP_PATTERN value=FILTER_VAL>
<param name=INFLUENCED_DP_1 value=Revenue Cockpit>.
What do these parameters mean??? What values are required here?
Thanks a lot for any helpful comments!
Anna

is completed.

How to do a reverse lookup on a value set?

I have a concurrent program which has multiple paramaters with various value sets. When I run reports, I want to dynamically list on the output the parameters the user gave. The problem is that these values are often the IDs and not the value the user sees.
Are there any packages in applications that will let me to do a "reverse lookup" with the value sets to get the values the user saw?
Thanks,
Kurzweil4

Hi Stomie,
Based on your description, the network ID of your reverse lookup zone is 172.16.160.
To create a reverse lookup zone, please follow steps below,
Right click Reverse Lookup Zones, click New Zone, choose proper settings of
Zone Type, Active Directory one Replication Scope,
Reverse Lookup Zone Name type based on your actual situation.
In the Reverse Lookup Zone Name page, check Network ID
radio button, enter the network ID. For example, if the network ID is 172.16.160, then enter 172, 16, 160 in order. Then you will see it appears
160.16.172.in-addr.arpa in the Reverse lookup zone name edit.
Or in the Reverse Lookup Zone Name page, check
Reverse lookup zone name radio button, then enter the name of the reverse lookup zone directly. Such as, enter
160.16.172.in-addr.arpa in the edit.
Click Next twice, click Finish.
Reverse lookup zone name end up with in-addr.arpa.
Best Regards,
Tina

Regarding downloading file on application server ?

i am using open data set and close data set to create file on application server.
the program is compiling fine, but when i execute it, it throws a dump saying
DATASET_NOT_OPEN , it says that the file is not open.
when i check value of sy-sub-rc it is 8. no file on server.
i want to create a dynamic file name, like i want to append the sy-cdate to the file name, so that when i schedule my program every day, i will create a new file.
what is the t-code to look at directories on app server. i tried al11, but couldnt find mine..but the basis said they had already created a folder for me there.
- Points will be awarded for inputs.
Message was edited by:
 ravi a

Hi,
May be you don't have write permission for the corresponding folder on the application server. thats why you could not create file on that folder.so ask you basis people for read/write permission on the that destination folder..
For creating dynamic file , you can use logical file and physical file concept..
for each interface maintain a logical file name in a ztable and ask your basis people to maintain a physical file path on application server for each logical file name.(using FILE Txn).
first get the logical file name from ztable then get corresponding physical path onapplication server using FM 'FILE_GET_NAME' and finally concatenate the sydatun to physical file name...
DATA: l_file_folder TYPE string,
 l_logical_file TYPE fileintern,
CLEAR: file1.
* First get the logical file name from table zabc021
SELECT SINGLE log_file " Actual file location
 INTO l_logical_file
FROM zabc021
WHERE interface = p_interface
 AND inorout = 'O'. "outbound interface
* Get the physical file name from the logical file name
CALL FUNCTION 'FILE_GET_NAME'
 EXPORTING
CLIENT = SY-MANDT
 logical_filename = l_logical_file
 IMPORTING
 file_name = l_file_folder
 EXCEPTIONS
 file_not_found = 1
 OTHERS = 2
IF sy-subrc = 0.
* In actual situation the file name should come from FILE txn
 CONCATENATE l_file_folder
 p_interface '_' sydatum4(2) sydatum6(2) '.DAT' INTO file1.
ELSE.
 CLEAR file1.
 MESSAGE s999 WITH 'No logical file maintained with name ' l_logical_file.
 EXIT.
ENDIF.
now file1 is the file name.
I hope this info is useful to you...
Reward if needful

How Can I redirect to Error Page

Hi
I have below requirement to insert records into a table based on entered search criteria. And same time don't want to insert the records if there are already records for same search criteria. For this we have done below steps
1) We have a page with two Date fields.
i) Date From
ii) Date To
2) User enters Date From and Date To values and he press "Go" Button.
We have created a Validation at page level of type "Function Returning Boolean".
We are passing two searching Date From and Date To values to function and returning TRUE if there are already records.
Now when condition is TRUE then we want to redirect to a new Page.
How can we do this?
Appreciate if somebody can help me.
Regards
Kiran Akkiraju

Scott
Here is the actual situation.
Let us assume I want to populate EMP_TMP table from EMP table.
For this on my first page I have two Fields which are
1) From Date
2) To Date
I am going to give some values to these two fields and I press a button.
Basically what I have to do is
INSERT INTO EMP_TMP
SELECT * FROM EMP
WHERE TRUNC(HIREDATE) BETWEEN TO_DATE(:P_DATE_FROM, 'DD-MON-YYYY') AND TO_DATE(:P_DATE_TO, 'DD-MON-YYYY')
But before doing this I want to validate whether for given date range already data exist in EMP_TMP table or not?
If Already data exist then I have to redirect to User to one page which showing some details.
IF data is not there then I have to insert these records into EMP_TMP table and show those records into another page.
I have given this example on EMP table. But I was having similar example here.
Could you please let me know how can I achieve this.
Regards
Kiran Akkiraju

How to solve "this type of file is not supported, or the required codec is not installed"?

Hi all,
I've just started using a new computer with WIndows 8.1 within the last week and have loaded my Adobe Premiere Elements 11.0 software into it.
In trying to view and edit a video I created on my old computer, I got "Media Pending" and "Media Offline" notices as soon as I began. The source files are located on an external drive with a permanent letter designation. I began the process of reconnecting my Project Assets files with the source files this morning, but have now encountered a new roadblock. Each time I try, I get the message "this type of file is not supported, or the required codec is not installed." It offers no information or options other than to click "OK," which is not very helpful.
All the source files are located in one folder on my external drive. I have been able to reconnect the JPEGs and the mp3 source files but not the AVI video files.
Here are three screenshots. The first is the "Media Offline" message, the second is the message I receive when I try to reconnect my Project Assets to the source files and the third is a screenshot of the codecs installed on the new computer.
Here is my new computer information:
Model: Del Inspiron 3847
Intel Core i5-4460
CPU @ 3.20 GHz 3.20 GHz
RAM 8 GB
System type: 64-bit, x64-based processor
I hope someone can guide me. What do I need to do to solve this problem?
Thank you.
Message was edited by: Janie Christensen Ficara

StreetSongs
Thank your for the information supplied.
But, what are the properties of this .avi file that you seek?
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
Pixel Aspect Ratio
Right now of prime interest is the video compression that is being wrapped by that AVI wrapper/container.
AVCHD.avi
MotionJPEG.avi
XviD.avi
DviX.avi
other
There are instances were a particular video compression or a particular container/wrapper format is each supported by Premiere Elements, but
not a combo of those particular two. But, in this instance, I suspect this to be a MotionJPEG video codec issue, but your details will
point us to the actual situation, and we will plan troubleshooting strategy from there.
ATR

XGL: Actual situation

Similar Messages

Maybe you are looking for