XI SOAP adapter : Error during parsing the SOAP part
Hello experts,
We have several scenarios SOAP to IDocs.
We are on XI 3.0 SP19, and since 9/6/09 around 4:00 PM GMT, our SOAP channels used to communicate with a specific 3rd party all stoped accepting incoming SOAP requests. All the messages are stucked on third party side, and we get the following error in the defaulttrace and application logs :
#1.5#001125A5BCD00066000076850013109E00046BF6A963E479#1244607054865#/Applications/ExchangeInfrastructure/AdapterFramework/SAPLibraries/SAPXDK#sap.com/com.sap.aii.af.soapadapter#com.sap.aii.messaging.mo.Message.reparseRootDocument()#PIMSOAP#21217##pxaci_PXA_6443451#PIMSOAP#a71ebfa0556d11decc24001125a5bcd0#SAPEngine_Application_Thread[impl:3]_50##0#0#Error#1#com.sap.aii.messaging.mo.Message#Plain###Error during parsing the SOAP part --- java.lang.NullPointerException#
It happened at the same time on all the environments for every interfaces using SOAP message from this sender to XI. That's the reason why we think it is a global issue, but we can not find anything concerning this error. Has anybody encountered this error or would have any clue of where it comes from ?
Many thanks,
Best regards,
Guislain
Hello Michal,
Thanks a lot for your help. Actualy we have tested with SOAP UI yesterday and this is what came out of the tests :
test 1 : we tried to call the XI service with the wsdl and put dummy data inside --> test OK
test 2 : we loaded in SOAP UI one of the file from our partner and tried to call the service --> test NOT OK
test 3 : we realized that there were some blank lines at the beginning of the file provided by the partner. we removed these blank lines --> test OK.
So we first thought that the format of the file sent by the partner was wrong and this is why we were getting the parsing error, because of these blank line. The thing is that these blank lines have always been here ! We have checked with old successful messages and they contain also these lines and if we test them in SOAP UI we get an error also. so it does not seems to come from this.
Moreover, as I said in my previous message, it happened on all the environments approximatly at the same time, so we are suspecting a global problem, but which one ? That's the million dollar question
Would you have any other ideas ?
Thanks a lot,
Best regards,
Guislain
Similar Messages
-
Mail-Adapter Integration Engine Error during parsing of SOAP header
Hello,
we use XI with the mail adapter. Most of the messages are processed correctly. But sometimes I get following errors in the J2EE-logviewer:
Transmitting the message to endpoint http://<xi-host>:<http-port>/sap/xi/engine
?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.a
pi.RecoverableException: Received HTTP response code 500 : Error during
parsing of SOAP header.
Failed to transmit message 4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND)
due to com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP
response code 500 : Error during parsing of SOAP header.
Retries exceded, set message
4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND) to status NON_DELIVERED.
Has somebody else the same problem and solved it or any idea what the matter could be?
Thanks for your help
ChristianHi Reddy,
We´ve got the following scenario:
Exchange-Server (is always up)
XI Mail-ReceiverAdapter
I use IMAP4 to access the Outlook-Email-Box
Everything works fine. But some Emails aren´t processed.
I think it´s a problem between adapterframework and the integration engine?
There is no difference between the emails?
If you´ll need further informations ask me?
Thanks -
HTTP response code 500 : Error during parsing of SOAP header
Hi Experts,
I have a MAIL to IDOC scenario. An external third party emails invoices to our inbox - which we pick up and process the attachment. All is well when I test the scenario internally, but when the third party emails it fails with (see ERROR MESSAGE below).
When I look at the SOAP header of the failed message I see the values from the dump in this field:
<sap:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderTHREAD-INDEX">AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=</sap:Record>
Can anyone tell me what SHeaderTHREAD-INDEX does? Or what my problem is (Our email is Outlook)
ERROR MESSAGE.........
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14), AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=協彎䅍䔾ਉ़䥎噏䥃䕟乏㸸㌱ㄵㄹ㰯䥎噏䥃䕟乏㸊उ㱁䵏啎呟䕘䍌彖䅔㸷⸵〼⽁䵏啎呟䕘䍌彖䅔㸊उ㱃啒剅乃失㹅啒㰯䍕剒䕎䍙ㄾਉ़䅍何乔彖䅔㸱⸴㜼⽁ꯃ䅢坡汫, ST: ST_XM; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: ; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14) (or one of the attributes) has the incorrect value AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQ An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1p
Transmitting the message to endpoint http://sdcxp1-ci.na.fmo.com:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header.We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation. -
Error during parsing of SOAP header
Hi all,
I have configured the j-meter to send an http request to inegration engine of PI.
The request xml that I am sending is as follows:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
<SOAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30"
versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1">
</SOAP:Main>
</SOAP:Header>
<SOAP:Body>
<ns1:UnitOfMeasure xmlns:ns1="urn:sapappl:mdm:cp:eame:masterdata:uom:620">
<Record>
<FinishedMaterialCode>000000000000000233</FinishedMaterialCode>
<BaseUOM>KG</BaseUOM>
<AlternateUOM>GEB</AlternateUOM>
<UnitsInAlternateUOM>100</UnitsInAlternateUOM>
<UnitsInBaseUOM>2268</UnitsInBaseUOM>
<Active_Deleted></Active_Deleted>
</Record>
</ns1:UnitOfMeasure>
</SOAP:Body>
</SOAP:Envelope>
I am getting the following response from the XI:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during parsing of SOAP header</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER"/><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>System error in parser
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Any idea as to why PI is not able to parse the request header?
Thanks,
AmitHi,
Better to take WSDL from PI(ID window) and try. -
Receiver SOAP channel error-- Cant parse the document; HTTP 200 OK
Hi All,
I am facing below error in SOAP receiver communication channel
SOAP: Error occurred: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: Cant parse the document; HTTP 200 OK
If I use "Do Not se SOAP Envelop" in receiver communication channel then it shows successfully delivered in message monitoring but never reached to target application. And if I uncheck "Do Not se SOAP Envelop" then the error is as I mentioned above.
Both ways it not working foe me.
Please advice.
Thanks
ShiviHi
I had a similar issue recent times and I have enablede the xpi inspector to check the logs of the request and the response sent and received...
Based on that you can check whether your payload is able to sent to receiver in proper format or any other issues..
Also try to check the payload format using the SOAPUI whether the ws is working fine for that or not.
HTH
Rajesh -
I am working on SharePoint 2010 Infopath form, i have created one secondary connection to SharePoint List view using XML Connection it works fine.
For the deployment from DEV to PROD i converted this connection to universal data connection (UDC) and tested this before deploying to PROD but i m getting below error.
An error occurred querying a data source.
i checked ULS logs and found below details
Data adapter failed during OnLoad: The UDC file contains errors: '=' is an unexpected token. The expected token is ';'. Line 17, position 108.
UDC file is below
<?xml version="1.0" encoding="UTF-8"?>
<?MicrosoftWindowsSharePointServices ContentTypeID="0x010100B4CBD48E029A4ad8B62CB0E41868F2B0"?>
<udc:DataSource MajorVersion="2" MinorVersion="0" xmlns:udc="http://schemas.microsoft.com/office/infopath/2006/udc">
<udc:Name>LastItemID</udc:Name>
<udc:Description>Format: UDC V2; Connection Type: XmlQuery; Purpose: ReadOnly; Generated by Microsoft InfoPath 2010 on 2014-04-25 at 16:49:31 by DOMAIN\username.</udc:Description>
<udc:Type MajorVersion="2" MinorVersion="0" Type="XmlQuery">
<udc:SubType MajorVersion="0" MinorVersion="0" Type=""/>
</udc:Type>
<udc:ConnectionInfo Purpose="ReadOnly" AltDataSource="">
<udc:WsdlUrl/>
<udc:SelectCommand>
<udc:ListId/>
<udc:WebUrl/>
<udc:ConnectionString/>
<udc:ServiceUrl UseFormsServiceProxy="false"/>
<udc:SoapAction/>
<udc:Query>https://contoso/_vti_bin/owssvr.dll?Cmd=Display&List={32364DED-7FE3-4276-837C-F2AC62C04B81}&View={804CC528-34B2-4473-89DB-C4E766CACC95}&XMLDATA=TRUE&NOREDIRECT=TRUE</udc:Query>
</udc:SelectCommand>
<udc:UpdateCommand>
<udc:ServiceUrl UseFormsServiceProxy="false"/>
<udc:SoapAction/>
<udc:Submit/>
<udc:FileName>Specify a filename or formula</udc:FileName>
<udc:FolderName AllowOverwrite=""/>
</udc:UpdateCommand>
<!--udc:Authentication><udc:SSO AppId='' CredentialType='' /></udc:Authentication-->
</udc:ConnectionInfo>
</udc:DataSource>
w: sandippatilblog.blogspot.com/Hi Sandip ,
How about escape “&” to “&” as below:
<udc:Query>https://contoso/_vti_bin/owssvr.dll?Cmd=Display&List={32364DED-7FE3-4276-837C-F2AC62C04B81}&View={804CC528-34B2-4473-89DB-C4E766CACC95}&XMLDATA=TRUE&NOREDIRECT=TRUE</udc:Query>
Reference:
http://social.technet.microsoft.com/Forums/en-US/534fae6b-2cef-4947-86e2-4869cb291cfe/the-form-cannot-be-opened-because-it-requires-the-domain-permission-level-log-id-5566-error?forum=sharepointcustomizationlegacy
http://stackoverflow.com/questions/3493405/do-i-really-need-to-encode-as-amp
Best Regards,
Eric
Eric Tao
TechNet Community Support -
[IWAF JCA PeopleSoft] **** Error in parsing the input document.
Hi,
I configured Peoplesoft Adapter 10.1.3.1 with Oracle BPEL 10.1.3.1, I am able to invoke BPEL from Peoplesoft using JCA configurtaion. But I am not able to invoke Peoplesoft component interface from BPEL PM, Invoke call fails with following error. Did any one know solution to this issue.
Thanks,
Manish
Tue, 6 Nov 2007 16:40:20.0954 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [info ] [IWAF JCA PeopleSoft] IWAFManagedConnection for PeopleSoft:Peoplesoft has listener registered: com.evermind.server.connector.ConnectionContext@b78555
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [info ] [IWAF JCA PeopleSoft] Local transaction not supported by underlying adapter.
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [info ] [IWAF JCA PeopleSoft] IWAFManagedConnection for PeopleSoft:Peoplesoft dispatch event 2
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [error] [IWAF JCA PeopleSoft] **** Error in parsing the input document.
oracle.xml.parser.v2.XMLParseException: Start of root element expected.
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
at com.iwaysoftware.idom.XmlDocument.parse(XmlDocument.java:120)
at com.iwaysoftware.idom.XmlDocument.setRootXML(XmlDocument.java:77)
at com.ibi.afjca.cci.IWAFInteraction.execProcess(IWAFInteraction.java:195)
at com.ibi.afjca.cci.IWAFInteraction.exec(IWAFInteraction.java:136)
at com.ibi.afjca.cci.IWAFInteraction.execute(IWAFInteraction.java:93)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:470)
at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:431)
at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:416)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:222)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:736)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:371)
at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1083)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:132)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:161)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiresNewInterceptor.invoke(TxRequiresNewInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeEngineBean_LocalProxy_4bin6i8.syncCreateAndInvoke(Unknown Source)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:499)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:451)
at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:125)
at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java:95)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DeliveryBean_RemoteProxy_4bin6i8.request(Unknown Source)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processNormalOperation(SOAPRequestProvider.java:455)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processBPELMessage(SOAPRequestProvider.java:278)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processMessage(SOAPRequestProvider.java:129)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:869)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:460)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [error] [IWAF JCA PeopleSoft] SOS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [error] [IWAF JCA PeopleSoft] oracle.xml.parser.v2.XMLElement@1f73ac7
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [error] [IWAF JCA PeopleSoft] EOS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Tue, 6 Nov 2007 16:40:21.0204 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [info ] [IWAF JCA PeopleSoft] IWAFManagedConnection for PeopleSoft:Peoplesoft dispatch event 4Kris,
I tried your suggestion, but it didn't help. I think the Ci jar file is getting loaded, because when I try to call any other interface whos class files are not included in CI jar file, it gives different error like "Not Authorized (90,6)Failed to execute PSSession request Cannot find Component Interface {LACATION_TABLE} (91,2)".
We verified all the configuration on Adapter and Peoplesoft aerver, every thing seems to be absolutely fine, even I turned on debug log level for adapter but that is not of any use.
I tried searching on the google, it seems many people who used Component Interface Java Classes faced such type of problem, they recommended some peoplesoft configuration, I tried their suggestions as well, but that also didn't work out.
Even though we are using Peoplesoft 8.4 Adapter asks for pstools.properties file whenever the BPEL Process is invoked, this file is there in the adapters lib directory, and jca-app-adapter directory, see below the log.
<2007-11-26 18:33:17,656> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
<2007-11-26 18:35:13,296> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Outbound> http://192.168.133.164:8888/orainfra/wsil/adapters/applications/CI_PERSONAL_DATA_invoke.wsdl?wsdl [ CI_PERSONAL_DATAPortType::CI_PERSONAL_DATA(input_CI_PERSONAL_DATA,output_CI_PERSONAL_DATA) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-11-26 18:35:13,312> <WARN> <default.collaxa.cube.ws> <AdapterFramework::Outbound> http://192.168.133.164:8888/orainfra/wsil/adapters/applications/CI_PERSONAL_DATA_invoke.wsdl?wsdl [ CI_PERSONAL_DATAPortType::CI_PERSONAL_DATA(input_CI_PERSONAL_DATA,output_CI_PERSONAL_DATA) ] - Unable to provide Log4j handle to com.ibi.afjca.cci.IWAFConnectionFactory via <public void setLog4jLogger(org.apache.log4j.Logger logger)> due to: com.ibi.afjca.cci.IWAFConnectionFactory.setLog4jLogger(org.apache.log4j.Logger)
Mon, 26 Nov 2007 18:35:13.0312 IST - Thread[HTTPThreadGroup-59,5,HTTPThreadGroup] [debug] [IWAF JCA] IWAFConnectionFactory:getConnection called with ConnectionSpec:
User :null
Password :null
AdapterName :PeopleSoft
Config :PSOFT9
Mon, 26 Nov 2007 18:35:13.0312 IST - Thread[HTTPThreadGroup-59,5,HTTPThreadGroup] [debug] [IWAF JCA] IWAFConnectionFactory:getConnection called with ConnectionSpec:
User :null
Password :null
AdapterName :PeopleSoft
Config :PSOFT9
Mon, 26 Nov 2007 18:35:13.0312 IST - Thread[HTTPThreadGroup-59,5,HTTPThreadGroup] [debug] [IWAF JCA] IWAFManagedConnectionFactory:createManagedConnection() entered.
Mon, 26 Nov 2007 18:35:13.0312 IST - Thread[HTTPThreadGroup-59,5,HTTPThreadGroup] [debug] [IWAF JCA] setLogWriter() gets called.
07/11/26 18:35:14 PSProperties not loaded from file. Couldn't find file: pstools.properties
07/11/26 18:35:18 PSProperties not loaded from file. Couldn't find file: pstools.properties
07/11/26 18:39:12 PSProperties not loaded from file. Couldn't find file: pstools.properties
07/11/26 18:51:38 PSProperties not loaded from file. Couldn't find file: pstools.properties
Thanks,
manish
Message was edited by:
user604262 -
UMS Adapter Error during ums adapter endpoint activation
Hi,
I have well configured the usermessagingdriver-email on SOA11g driver for both imam/stmp protocols, but on deploying process with UMS Adapter (Reciving Notification) i got the error "UMS Adapter Error during ums adapter endpoint activation" with following
javax.resource.ResourceException
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:212)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerApplication(UmsEndpoint.java:99)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.<init>(UmsEndpoint.java:92)
at oracle.tip.adapter.ums.inbound.UmsPollerEndpoint.<init>(UmsPollerEndpoint.java:47)
at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResourceAdapter.java:183)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:492)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performEndpointActivation(JCAEndpointActivation.java:649)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:633)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performActivation(JCAEndpointActivation.java:387)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisionRegistry.java:593)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.java:445)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisionRegistry.java:409)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionRegistry.java:334)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisionRegistry.java:140)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:103)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevisionChanged(AdapterService.java:348)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.processDefaultInSeries(FabricKernelInitializerServlet.java:824)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:773)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Also when I have received email in my mailbox nothing is happened, no new istance has created, but on start soa server 11g all messages which are currently located in mailbox had been processed and ( on usermessagingdriver-email I can saw Messages Received Successfully)
Thanks,
MilosHi Saravana
Have you tried : http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/ ?
Regards
A -
Hi All ,
I was just clearing the dimensions using the below in SQL commandline throwing below error . However this works fine with my another 5 dimensions .Any advice ?
SQL> exec dbms_cube.build('POSITION using (clear, compile)');
BEGIN dbms_cube.build('POSITION using (clear, compile)'); END;
ERROR at line 1:
ORA-37162: OLAP error
XOQ-01703: error during parse of build process script: "BUILD POSITION using
(clear, compile)", ""
ORA-06512: at "SYS.DBMS_CUBE", line 236
ORA-06512: at "SYS.DBMS_CUBE", line 280
ORA-06512: at line 1
Thanks,
DxPI believe in this case the parser that is parsing the build process script is treating the dimension name "POSITION" as a keyword and not as an OLAP Cube Dimension name. You may wish to rename the dimension to a name other than "POSITION" or double quotes as specified previously.
Edited by: user713408 on Aug 1, 2011 12:12 PM -
Getting the following error while parsing the values usng xml parser
Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
-- PARSE INPUT FILE
FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
-- GET DOCUMENT
DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
LOAD_SUPP(doc);
ELSE
DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
AjeshBesides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers -
Error importing SharePoint site collection - "there is an error during importing the Roles tag"
Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks. -
Error in parsing the taglib tag in the JSP page
Hi
We are trying to deploy and run a Web Application in CE 7.1 SP01. We are successful in deploying and running servlet based web pages, but when it comes to JSP's the taglibs are not parsed and we get the following error message
Runtime error in processing of the JSP file E:\usr\sap\CE1\J01\j2ee\cluster\apps\sap.com\TestNWEAR\servlet_jsp\TestNW\root\admin\main.jsp.
The error is: com.sap.engine.services.servlets_jsp.jspparser_api.exception.JspParseException: Error in parsing the taglib tag in the JSP page. Cannot resolve URI: [webwork]. Possible reason - validation failed. Check if your TLD is valid against its scheme.02004C4F4F5000190000004E000013400191D308B45
Processing HTTP request to servlet [jsp] finished with error.
The error is: java.io.FileNotFoundException: E:\usr\sap\CE1\J01\j2ee\cluster\apps\sap.com\TestNWEAR\servlet_jsp\TestNW\root\admin\webwork (The system cannot find the file specified)02004C4F4F50001900000051000013400191D308B45AF1AB
We followed the below weblog to correct the TLD's in JAVA EE 5 @ SAP but it did not work for us.
/people/community.user/blog/2006/10/13/porting-the-java-blueprint-solutions-catalogue-applications-to-sap-netweaver-application-server-java-ee-5-edition
Any immediate help will be rewarded with full points
Thanks in advance
Lakshmi
Edited by: lakshmi N Munnungi on May 5, 2008 11:36 PM
Edited by: lakshmi N Munnungi on May 5, 2008 11:39 PMHi Lakshmi,
I have also the same problem. If you have found the solution please post it thanks,
Thanks,
Tariq -
Getting windows error during running the sql scripts from form 6i
I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on forms screen after pressing the forms button but I am getting windows error during running the sql scripts from form 6i.
I am using forms 6i with patch 17 with Oracle 10G database on windows 2000 professional on same computer.
This application runs fine with 8i.
Please inform me where the problem is and how to overcome it.
Zafri.I am using Text_IO in my form's when button press trigger , inorder to create the
text file, then in the same when button press triger
I am calling RMAN via host command in order to run the script which was created by text_IO.
Below you find some of the code. I will appreciate if you solve the problem.
when button press trigger:
Declare
in_file3 Text_IO.File_Type;
linebuf3 VARCHAR2(1800);
output11 varchar2(1000);
BEGIN
output11:='C:\EXPLAIN_PLUS\misc\rm_file.bat ';
Host(output11,no_screen);
:sql.execution_plan:= 'Working........................';
synchronize;
in_file3 := Text_IO.Fopen('c:\explain_plus\misc\create_table.txt', 'w');
Text_IO.Put_Line(in_file3, linebuf3);
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' run { sql "create table PLAN_TABLE (statement_id,...object_name varchar2(30),object_instance numeric,object_type varchar2(30),optimizer varchar2(255),search_columns number,id .....partition_start varchar2(255),partition_stop varchar2(255),partition_id numeric,other long,distribution varchar2(30)) "; } ');
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' ');
Text_IO.FCLOSE(in_file3)
Declare
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
output VARCHAR2(1000);
output2 VARCHAR2(1000);
dummy varchar2(40);
in_file Text_IO.File_Type;
linebuf VARCHAR2(1800);
BEGIN
Get_Connect_Info(un,pw,cn);
/* for Plan_table Begg. Second INNER BLOCK */
declare
dummy2 varchar2(40);
begin
select table_name into dummy2 from all_tables where table_name='PLAN_TABLE';
if dummy2 = 'PLAN_TABLE' then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\MISC\TRUNC2.txt ' ;
Host(output2,no_screen);
end if;
exception
when no_data_found then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\misc\create_table.txt ';
Host(output2,no_screen);
end; -- -
Error while parsing the Tag Library Descriptor
Hi,
We are installing LC ES2 on Suse64 / weblogic platform. When the adobe-conmtentservices application is starting, we see a lot od error like this:
<Mar 24, 2010 10:56:53 AM CET> <Warning> <HTTP> <BEA-101196> <[/contentspace]: Error while parsing the Tag Library Descriptor at "/opt/oracle/product/WLS1031/user_projects/domains/LC9/servers/LC9_MS/tmp/_WL_user/adobe- contentservices/4xxkue/war/WEB-INF/contentservices.tld".
com.ctc.wstx.exc.WstxIOException: Tried all: '1' addresses, but could not connect over HTTP to server: 'java.sun.com', port: '80'
at com.ctc.wstx.sr.StreamScanner.throwFromIOE(StreamScanner.java:683)
at com.ctc.wstx.sr.BasicStreamReader.next(BasicStreamReader.java:1086)
at weblogic.servlet.internal.TldCacheHelper$TldIOHelper.parseXML(TldCacheHelper.java:134)
at weblogic.descriptor.DescriptorCache.parseXML(DescriptorCache.java:380)
at weblogic.servlet.internal.TldCacheHelper.parseTagLibraries(TldCacheHelper.java:65)
Truncated. see log file for complete stacktrace
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'java.sun.com', port: '80'
at weblogic.net.http.HttpClient.openServer(HttpClient.java:314)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:404)
at weblogic.net.http.HttpClient.New(HttpClient.java:240)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:172)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:356)
Truncated. see log file for complete stacktrace
The application tries to download something from java.sun.com site but the server can not access internet. The process is repeated for each TLD file !
After a very time (more than 45 minutes!), the server finally starts and all adobe application are active
So, how to correct this behaviror ? is there a patch?
cb.Hi,
Did you get solution for this because I am also facing same issue. Please do reply ASAP... it is very uegent.
Regards,
Srujan -
Error in parsing the input document
Dear All
When I am trying to fetch data from SAP thro OracleAS with BPEL , I am getting this error. I dont know whee i did worng, Pl. clarify me if any body know this....
<summary>
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - WSIF JCA Execute of operation 'GetDetail' failed due to: Error in parsing the input document.; nested exception is:
javax.resource.ResourceException: Error in parsing the input document.
</summary>Sir,
From the JCA Log I got the below message
Tue, 1 Jul 2008 18:30:43.0220 IST - Thread[HTTPThreadGroup-56,5,HTTPThreadGroup] [error] [IWAF JCA SAP] Error in processing the input document.
getMessage(): java.lang.Exception: Function module inputVariable does NOT exist.
int getError(): Server
getAdapterCode(): null
getVendorThrowable(): null
Also i am not giving my input in xml format. when i am running the bpel console its asking for input in html format , there im giving my input, after urs question only im doubting on my input. how can i give my input in which format, how to defin that format. pl. give me yours views and also i will try myself.
Maybe you are looking for
-
Passing the values from subreport to master report in JasperReports
Hi All, I want to pass the values from subreport to master report, but my subreport is without any query. Please help me in this regard. its urgent. Thanks & Regards Kris
-
Using Oracle Text in Materialized View
Hi all, I have a situation like that: I create a MATERIALIZED VIEW select data from 2 normal view Create Materialized VIEW SEARCH_DNICT REFRESH COMPLETE NEXT SYSDATE + 1/4069 SELECT * FROM SEARCH_VIEW_CMS UNION ALL SELECT * FROM SEARCH_VIEW_TABLEAnd
-
Changing Report 6.05 Layout Width
I need a wider report layout ( say 126 Characters in width) not to be resized after Report Wizard execution. I changed the layout manually, though, it doesn't feel good. If I run Report Wizard to modify the report , it restores the default page layou
-
What happened to the plug-ins in CS6? Can you move them from CS5 to CS6?
Have they been renamed and placed in another folder/area? Or am I asking the obvious?
-
Unable to install Genius G-Pen F610 Tablet on Macbook Pro
Hi. Hoping for some answers here. I have a Genius G-Pen F610 Tablet that I'd like to use with my new Macbook Pro. It works fin on my old Windows PC. According to Genius, the tablet is supposed to work on Mac. I have been to the Genius website, loca