Xml and version 6-7
I am loading an XML into flash which contains a carriage
return.
In Flash version 7+ this is no problem.
In version 6 any node with the carriage return Kills the XML
parse.
All other aspects of the swf work in version 6 and would like
to keep it in the that version.
Anybody have a solution for this?
I suppose you could strip out the CRs before they get to the
parser. See
XML.onData
Similar Messages
-
when i started my cityville from facebook the loading progress stopped at 73%.. when it stop i need to download file en-US.xml and gameSettings.xml
this is the download URL for gameSettings.xml : http://cityvillefb.static.zgncdn.com/54988/gameSettings.xml.z
and this is the download URL for en-US.xml :
http://cityvillefb.static.zgncdn.com/54988/en_US.xml.z
when i used version 5.0.1 i never met any problem like this..!!
and i already use adobe flash player higher than version 10
so how can i fix this problem..??Hi Scott,
in SDIXML_DATA_TO_DOM you can only pass the name of root node, so you can not assign attribute xmlns to root node (<Data xmlns="ServiceNet">) ... unless you build the xml document from scratch (without SDIXML_DATA_TO_DOM)
when using your sample code (without sale) I get xml without <item>
SDIXML_DATA_TO_DOM => SDIXML_DOM_TO_SCREEN::
<?xml version="1.0" encoding="utf-8" ?>
- <Data>
<LV_XMINS>xmlns="DUMMY FIELD</LV_XMINS>
<BATCHDATETIME>2009-11-13T12:05:58</BATCHDATETIME>
</Data>
regards, Karsten -
Report Builder RDF, XML, REP and Version Control
I'm looking to convert our existing RDF reports to XML format to better support version control and have a few questions.
- Are there any issues with converting these RDF files to XML and developing them going forward?
- When it's time to deploy to the server we'll convert them to RDF or REP. Any issues?
- This question was asked before, [Thread: Oracle Reports Builder - RDF vs XML|https://forums.oracle.com/forums/thread.jspa?threadID=721959], but that was over 3 years ago. Have the issues been resolved?
- Is anyone currently following the workflow I've outlined with success?
Couple of links of interest regarding this topic.
[Tuning Oracle Reports - 20.5.1 Paper Layout|http://download.oracle.com/docs/html/B14048_02/pbr_tune.htm#i1007252]
[Running Report Requests - 13.3 Deploying Your Reports|http://download.oracle.com/docs/html/B14048_02/pbr_run.htm#i1008764]
My Oracle Report Builder Version Info (Help -> About)
Report Builder 10.1.2.0.2
ORACLE Server Release 10.1.0.4.2
Oracle Procedure Builder 10.1.2.0.2
Oracle ORACLE PL/SQL V10.1.0.4.2 - Production
Oracle CORE 10.1.0.4.0 Production
Oracle Tools Integration Services 10.1.2.0.2
Oracle Tools Common Area 10.1.2.0.2
Oracle Toolkit 2 for Windows 32-bit platforms 10.1.2.0.2
Resource Object Store 10.1.2.0.2
Oracle Help 10.1.2.0.2
Oracle Sqlmgr 10.1.2.0.2
Oracle Query Builder 10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 10.1.2.0.2
Oracle XML Developers Kit 10.1.0.4.2 - Production
Oracle Virtual Graphics System 10.1.2.0.2
Oracle Image 10.1.2.0.2
Oracle Multimedia Widget 10.1.2.0.2
Oracle Tools GUI Utilities 10.1.2.0.2
Edited by: 896352 on Nov 9, 2011 2:35 PMHi Michael,
Per my understanding that you want to find a solution for version control when you design the report using the Report Builder 3.0, right?
As you know that Report Builder is a tool which can only work on one single file instead of a project , so the current version of Report Builder doesn't have these capabilities. You can submit a feature request about it on the Microsoft UserVoice site
here:
http://visualstudio.uservoice.com/forums/121579-visual-studio/category/53187-sql-bi-tools-srs-ssis-ssas-
Generally, visual Studio Team System and Visual Source Safe integrate with the Visual Studio/BIDS shell and third-party source control solutions like SVN managed from the file system play well with version control. So I would suggest you to consider use
them instead.
In conclusion, one possible workaround for you is that you can save all .rdl files in third part tool’s(TFS) workspace folder for version control purpose (check in, check out with the Windows Shell Extension), and you can use Report Builder to edit these
report files. Then use Report Builder to deploy the .rdl file to Report Server.
More details information about the version control for your reference:
https://sqlserverbiblog.wordpress.com/tag/ssrs-version-control/
Similar thread for your reference:
https://social.msdn.microsoft.com/Forums/en-US/939b3a90-067d-4593-b456-76533c9d60ce/sync-ssrs-visual-studio-project-with-ssrs-server-alm?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1ad0db30-7fd8-4007-9731-ec8f2f44605f/report-format-rdl-version-control?forum=sqlreportingservices
If you still have any question, please feel free to ask.
Regards
Vicky Liu -
App Files Saved as XML and Working with New Versions
We work with app data in the form of array of large clusters and use LV Anything to XML conversion VIs to save to disk.
The problem is when new app versions are developed and changes are made to the cluster format; we want the customer to be able to open the old version saved XML file format.
Usually the saved cluster (in XML) has be changed by adding/removing a field or even changing the options of a ring control for example.
The app name and version is stored in the XML.
Question: Is there a way of easily working with XML file formats with slightly different fields?
In the past we have worked with the raw XML text by searching for fields which are different and modifying them accordingly so they are accepted by the new file format.
Any tips would be greatly appreciated.battler. wrote:
I have written a software name and version cluster to XML. How do you read the version field in the XML? Do you use string search? Is there a better way?
Yes, I use String Search (because it is near the beginning of the XML string). Depending on your XML "flavor", you should be able to uniquely-identify the Version information.
I'm interested in how best to work with XML. It seems cumbersome and prone to error to use string functions. Is there a way or best practice of reading the XML fields directly without converting to cluster?
XML is, after all, text with specific "tag" information, also text, identifying it. String functions are pretty much "the way to go", but except in rare circumstances, you shouldn't necessarily "roll your own", but should try to use the utilities that come with your XML package that "know" how to do the mapping between the XML representation of a LabVIEW variable (and its value) and the Variable itself.
Can you elaborate on these "mapping" and "reading/conversion" routines you're using? How do they work and what functions do they use?
An excellent question. There are at least three XML packages out there for LabVIEW -- the "native" LabVIEW package that NI provides, EasyXML from JKI Software (distributed using VIPM), and GXML, also on the LabVIEW Package network. I'm afraid that I'm slightly "abusing" XML, and have made some modifications to how I use EasyXML and GXML.
If you simply view an XML file in a "smart" editor, you'll see a series of text lines with Begin/End tags (like HTML). Depending on the XML "flavor", embedded between the tags are data that describe the LabVIEW variable type (e.g. Dbl, Cluster, Array, etc.) and also the value(s) of the Variable. The "ReadXML" (or similarly-named) function takes this description and (usually) returns a Variant that you can "turn into" the chosen variable (because you know the data type). [You may need to tell the Reader, in advance, the type of LabVIEW variable to expect so that it "knows when to stop reading"].
As to how they work, they just do String pattern matching and processing, usually of a pretty sophisticated level, but then you don't have to do the hard work yourself!
Why do you use Private Project library? Is your project based on OO?
The reason I used a Project Library with the "messy details" in the Private parts has nothing to do with OO, but rather with "data hiding". I actually developed this for my data processing routines. I had a set of routines that collected and analyzed the data (about 700 VIs). Let's call this Project "Version 1".
For Version 2, I basically added a dozen variables to the main Data Cluster (having over a hundred elements) that characterized the response. As this Cluster was in a Type Def, I didn't have to change my code very much to accomodate this new data format, so most of my VIs kept the same name, but were "different" because the underlying TypeDefs were different.
So I have a Version 1 program that can analyze Version 1 data, and a Version 2 program for Version 2 data. What I want is a Version-independent program that can look at the data, and then call for Version 1 or Version 2 analysis. By burying the Version 1 and Version 2 code inside of a Project Library, and only exposing the top-level "Analyze My Data" VI, my Analysis routine, which didn't know (and didn't care) about the two different Data TypeDefs, just figures out (from the XML) which Version of data I have and then calls either Lib1:Analyze My Data or Lib2:Analyze My Data. If I ever change the Version again, I just need to copy the code in the Library to a new Lib3 Library, modify the TypeDef and related version-specific code as needed, and I'm done.
I may have made this sound easy -- trust me, it was a definite learning experience. While trying this out, the first thing I did was to "break" my installations of LabVIEW 2012, 2013, and 2014 (curiously, LabVIEW 2011 wasn't broken). It stayed "broken" for about a week, then "cured" itself (I'd done something illegal, or maybe just immoral, with my Library, and it took a while to purge the badness).
BS -
OS = Windows 7
When I visit a site like youtube whith private browsing enabled and with the add-on named "shockwave flash" in firefox add-on list installed and activate the flashplayer by going to a video the following files are created in the folder C:\Users\MyUserName\AppData\Local\Temp\plugtmp-1
plugin-crossdomain.xml
plugin-strings-nl_NL-vflLqJ7vu.xlb
The contents of plugin-crossdomain contain both the "youtube.com" adress as "s.ytimg.com" and is as follows:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
-<cross-domain-policy> <allow-access-from domain="s.ytimg.com"/> <allow-access-from domain="*.youtube.com"/> </cross-domain-policy>
The contents of the other file I will spare you cause I think those are less common when I visit other sites but I certainly don't trust the file. The crossdomain.xml I see when I visit most other flashpayer sites as well.
I've also noticed multiple plugin-crossdomain-1.xml and onwards in numbers, I just clicked a youtube video to test, got 6 of them in my temp plus a file named "plugin-read2" (no more NL file cause I changed my country, don't know how youtube knows where I'm from, but that's another subject, don't like that either). I just noticed one with a different code:
<?xml version="1.0"?>
-<cross-domain-policy> <allow-access-from domain="*"/> </cross-domain-policy>
So I guess this one comprimises my browsing history a bit less since it doesn't contain a webadress. If these files are even meant to be deposited in my local\temp folder. The bigger problem occurs when they stay there even after using private browsing, after clearing history, after clearing internet temporary files, cache, whatever you can think of. Which they do in my case, got more than 50 plugtmp-# folders in the previous mentioned local\temp folder containing all website names I visited in the last months. There are a variety of files in them, mostly ASP and XML, some just say file. I have yet to witness such a duplicate folder creation since I started checking my temp (perhaps when firefox crashes? I'd say I've had about 50 crashes in recent months).
I started checking my temp because of the following Microsoft Security Essential warnings I received on 23-4-12:
Exploit:Java/CVE-2010-0840.HE
containerfile:C:\Users\Username\AppData\Local\Temp\jar_cache2196625541034777730.tmp
file:C:\Users\Username\AppData\Local\Temp\jar_cache2196625541034777730.tmp->pong/reversi.class
and...
Exploit:Java/CVE-2008-5353.ZT
containerfile:C:\Users\Noname\AppData\Local\Temp\jar_cache1028270176376464057.tmp
file:C:\Users\Noname\AppData\Local\Temp\jar_cache1028270176376464057.tmp->Testability.class
Microsoft Security Essentials informed me that these files were quarantained and deleted but when going to my temp file they were still there, I deleted them manually and began the great quest of finding out what the multiple gigabytes of other files and folders were doing in that temp folder and not being deleted with the usual clearing options within firefox (and IE).
Note that I have set my adobe flasplayer settings to the most private intense I could think of while doing these tests (don't allow data storage for all websites, disable peer-to peer stuff, don't remember exactly anymore, etc.). I found it highly suspicious that i needed to change these settings online on an adobe website, is that correct? When right-clicking a video only limited privacy options are available which is why I tried the website thing.
After the inital discovery of the java exploit (which was discovered by MSE shortly after I installed and started my first scan with Malwarebytes, which in turn made me suspicious whether I had even downloaded the right malwarebytes, but no indication in the filename if I google it). Malwarebytes found nothing, MSE found nothing after it said it removed the files, yet it didn't remove them, manually scanning these jar_cache files with both malwarevytes and MSE resulted in nothing. Just to be sure, I deleted them anyways like I said earlier. No new jar_cache files have been created, no exploits detected since then. CCleaner has cleaned most of my temp folder, I did the rest, am blocking all cookies (except for now shortly), noscript add-on has been running a while on my firefox (V 3.6.26) to block most javascripts except from sites like youtube. I've had almost the same problem using similar manual solutions a couple of months ago, and a couple of months before that (clearing all the multiple tmp folders, removing or renaming jar_cache manually, running various antmalware software, full scan not finding a thing afterwards, installing extra add-ons to increase my security, this time it's BetterPrivacy which I found through a mozilla firefox https connection, I hope, which showed me nicely how adobe flash was still storing LSO's even after setting all storage settings to 0 kb and such on the adobe website, enabling private browsing in firefox crushed those little trolls, but still plugtmp trolls are being created, help me crush them please, they confuse me when I'm looking for a real threat but I still want to use flash, IE doesn't need those folders and files, or does it store them somewhere else?).
I'm sorry for the long story and many questions, hope it doesn't scare you away from helping me fight this. I suspect it's people wanting to belong to the hackergroup Anonymous who are doing this to my system and repeating their tricks (or the virus is still there, but I've done many antivirus scans with different programs so no need to suggest that option to me, they don't find it or I run into it after a while again, so far, have not seen jar_cache show up). Obviously, you may focus on the questions pertaining firefox and plugtmp folders, but if you can help me with any information regarding those exploits I would be extremely grateful, I've read alot but there isn't much specific information for checking where it comes from when all the anti-virus scanners don't detect anything anymore and don't block it incoming. I also have downloaded and installed process monitor but it crashes when I try to run it. The first time I tried to run it it lasted the longest, now it crashes after a few seconds, I just saw the number of events run up to almost a million and lots of cpu usage. When it crashed everything returned back to normal, or at least that's what I'm supposed to think I guess. I'll follow up on that one on their forum, but you can tell me if the program is ligit or not (it has a microsoft digital signature, or the name micosoft is used in that signature).update:
I haven't upgraded my firefox yet because of a "TVU Web Player" plugin that isn't supported in the new firefox and I'm using it occasionally, couldn't find an upgrade for it. Most of my other plugins are upgraded in the green (according to mozilla websitechecker):
Java(TM) Platform SE 6 U31 (green)
Shockwave for Director (green - from Adobe I think)
Shockwave Flash (green - why do I even need 2 of these adobe add-ons? can I remove one? I removed everything else i could find except the reader i think, I found AdobeARM and Adobe Acrobat several versions, very confusing with names constantly switching around)
Java Deployment Toolkit 6.0.310.5 (green, grrr, again a second java, why do they do this stuff, to annoy people who are plagued with java and flash exploits? make it more complicating?)
Adobe Acrobat (green, great, it's still there, well I guess this is the reader then)
TVU Web Player for FireFox (grey - mentioned it already)
Silverlight Plug-In (yellow - hardly use it, I think, unless it's automatic without my knowing, perhaps I watched one stream with it once, I'd like to remove it, but just in case I need it, don't remember why I didn't update, perhaps a conflict, perhaps because I don't use it, or it didn't report a threat like java and doesn't create unwantend and history compromising temp files)
Google Update (grey - can I remove? what will i lose? don't remember installing it, and if I didn't, why didn't firefox block it?)
Veetle TV Core (grey)
Veetle TV Player (grey - using this for watching streams on veetle.com, probably needs the Core, deleted the broadcaster that was there earlier, never chose to install that, can't firefox regulate that when installing different components? or did i just miss that option and assumed I needed when I was installing veetle add-on?)
Well, that's the list i get when checking on your site, when i use my own browseroptions to check add-ons I get a slightly different and longer list including a few I have already turned off (which also doesn't seem very secure to me, what's the point in using your site then for anything other than updates?), here are the differences in MY list:
I can see 2 versions of Java(TM) Platform SE 6 U31, (thanks firefox for not being able to copy-paste this)
one "Classic Java plug-in for Netscape and Mozilla"
the other is "next generation plug-in for Mozilla browsers".
I think I'll just turn off the Netscape and Mozilla one, don't trust it, why would I need 2? There I did it, no crashes, screw java :P
There's also a Mozilla Default plugin listed there, why does firefox list it there without any further information whether I need it or not or whether it really originates from Mozilla firefox? It doesn't even show up when I use your website plugin checker, so is there no easy way by watching this list for me to determin I can skip worrying about it?
There's also some old ones that I recently deactivated still listed like windows live photo gallery, never remember adding that one either or needing it for anything and as usual, right-clicking and "visit homepage" is greyed out, just as it is for the many java crap add-ons I encountered so far.
Doing a quick check, the only homepage I can visit is the veetle one. The rest are greyed out. I also have several "Java Console" in my extentions tab, I deactivated all but the one with the highest number. Still no Java Console visible though, even after going to start/search "java", clicking java file and changing the settings there to "show" console instead of "hide" (can't remember exact details).
There's some other extentions from noscript, TVU webplayer again, ADblock Plus and now also BetterPrivacy (sidenote, a default.LSO remains after cleanup correct? How do I know that one isn't doing anything nasty if it's code has been changed or is being changed? To prevent other LSO's I need to use both private browsing and change all kinds of restrictions online for adobe flashplayer, can anyone say absurd!!! if you think you're infected and want to improve your security? Sorry that rant was against Adobe, but it's really against Anonymous, no offense). -
How to set buildID.xml and custom.properties in SDK
Hello,
I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
Within the sap note 1484551, you mentioned we need change the
SDKInstallDir/build/buildID.xml file, here is the context of the file:
buildID.xml -
<?xml version="1.0" encoding="UTF-8"?>
<buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
<customer>XXXXXX</customer>
<revision>1.0.0.0</revision>
<build>1</build>
</buildID>
buildID.xml -
1. how can we change the revision and build?
There is another file BuildToolDir/build/script/custom.properties, here
is the file context:
custom.properties----
This file contains build properties used to configure the build
system.
The name of the software vendor implementing the customizations.
vendor.name=xxxxxxxxx
Vendor build identifier. This value is used to uniquely identify
customizations built by a particular vendor for a particular customer
and base
application version.
This is also used in path locations and in naming certain build
artifacts, like the custom EJB module and the utility classes archive.
vendor.id=xxxxxxxxx
The installation of the J2EE engine installed in the development
environment.
ex. C:/usr/sap/CE1\J00
j2ee.instance.dir=J2EEInstanceDir
The web context path used to access the main web application. This
is used by the build to set the
context-root value in application.xml after an update has been
imported.
web.context.path=
The web context path used to access the production XML interface web
application. This is used by the build to set the
context-root value in application.xml after an update has been
imported.
xml.context.path=
The web context path to access resources from the web extension
application, like images and work instruction HTML files.
web-ext.context.path=web-ext
The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
The JDBC driver configured for the application server.
db.drivername=VMJDBC
JDBC connection propertes for the WIP (Work In Process) database.
This is the primary application database.
db.wip.driverclassname=
db.wip.driver.url=
db.wip.host=
db.wip.port=
db.wip.sid=
db.wip.user=
db.wip.password=
JDBC connection propertes for the ODS (Open Data Store) database.
This is the offline reporting and archiving database.
db.ods.driverclassname=
db.ods.driver.url=
db.ods.host=
db.ods.port=
db.ods.sid=
db.ods.user=
db.ods.password=
Flag indicating whether to add DPMO NC codes to NC idat files when a
new update is imported. This value is initially
set by the installer according the the user selection.
dpmo.nc.codes=
The default locale used by the production system. The default locale
is the locale used to display locale
specific text and messages when the requested locale is not
available. This property does not need to
be set if the default locale is english.
default.locale=en
Used when running the build from Eclipse to locate the java compiler
used by the WebLogic EJB compiler.
jdk.home=C:/Program Files/Java/jdk1.5.0_20
Compiler debug mode. If set to 'true', debug symbols will be
compiled into the byte code.
compile.debug=true
Keystore alias
security.alias=xxxxx
Keystore password
security.storepass=ChangeIt
Key password
security.keypass=ChangeIt
Keystore type (jks=default,jceks,pkcs12)
security.storetype=jks
Optional source control build identifier that is to be displayed with
standard version information.
scs.build.ID=
Optional extended version information to be displayed with standard
version information.
ext.info=
custom.properties----
2. How can we change this here?
Regards,
Leon Lu
Edited by: Leon Lu on Aug 4, 2011 11:14 AM
Edited by: Leon Lu on Aug 4, 2011 11:21 AMHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
XMl parser version problem for running struts project in jdeveloper 10.1.3
Dear All.
I am trying to run a struts (v 1.2.9) based project in Jdeveloper 10.1.3.1.0.The struts version in Jdeveloper is 1.1.
when i am trying to run the index.jsp i get an error:
org.xml.sax.SAXNotRecognizedException: http://apache.org/xml/features/validation/dynamic
I think the XML parser version is a problem.Jdeveloper has OracleXMLParser v2 and i think the XML Parser apis used in building the project is different.I have placedcustiom xml parser apis and the xerces.jar in the jdevbin/jdev/lib folder and included these jar in the bootclasspath as follows:
AddVMOption -Xbootclasspath/p:../lib/xml-apis.jar
AddVMOption -Xbootclasspath/p:../lib/xerces-2.6.2.jar
But even then the Exception persists.Is the syntax for Xbootclasspath wrong or i need to place these custom api's in some other location of jdev.
I am not being able to figure out the XMl parser problem.
Any help wud be great.
Is it that i cant run the project in jdeveloper.Just to mention the application is deployed in OC4J on the server and runs fine..But its only that i kant run it locally through jdeveloperI am also facing the same issue on my laptop. I searched for forum but no luck.
appreciate if anybody can throw some light on this. -
Passing parameters for a query throught XML and capturing response in the same
Hi All,
I have defined a RequestParameters object and i am passing paramerts for a query through XML and trying to capture the result in the same and send back to the source. In this case i am send XML from excel.
Below is my XML format.
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Insert xmlns="http://tempuri.org/">
<dataContractValue>
<dsRequest>
<dsRequest>
<SOURCE></SOURCE>
<ACTION>Insert</ACTION>
<RequestParams>
<RequestParams>
<ACC_NO>52451</ACC_NO>
<EMP_CITY>HYD</EMP_CITY>
<EMP_NAME>RAKESH</EMP_NAME>
<EMP_CONTACT>99664</EMP_CONTACT>
<EMP_JOM>NOV</EMP_JOM>
<EMP_SALARY>12345</EMP_SALARY>
</RequestParams>
<RequestParams>
<ACC_NO>52452</ACC_NO>
<EMP_CITY>HYD</EMP_CITY>
<EMP_NAME>RAKESH</EMP_NAME>
<EMP_CONTACT>99664</EMP_CONTACT>
<EMP_JOM>NOV</EMP_JOM>
<EMP_SALARY>12345</EMP_SALARY>
</RequestParams>
</RequestParams>
</dsRequest>
<dsRequest>
<SOURCE></SOURCE>
<ACTION>Update</ACTION>
<RequestParams>
<RequestParams>
<ACC_NO>52449</ACC_NO>
<EMP_CITY>HYD1</EMP_CITY>
<EMP_NAME>RAKESH1</EMP_NAME>
<EMP_SALARY>1345</EMP_SALARY>
</RequestParams>
<RequestParams>
<ACC_NO>52450</ACC_NO>
<EMP_CITY>HYDer</EMP_CITY>
<EMP_NAME>RAKEH</EMP_NAME>
<EMP_SALARY>1235</EMP_SALARY>
</RequestParams>
</RequestParams>
</dsRequest>
</dsRequest>
</dataContractValue>
</Insert>
</s:Body>
</s:Envelope>
Where i have a List of dsRequest and RequestParams, where i can send any number of requests for Insert,Update. I have two a XML element defined in RequestParams "RowsEffected","error" where the result will be caputred and is updated
to the response XML.
I have 6 defined in RequestParams
EMP_SALARY(int),ACC_NO(int),EMP_CITY(string),EMP_NAME(string),EMP_CONTACT(string),EMP_JOM(string)
My Question is:
When i am trying to build response XML with the following code, the parameters which are not given in the Request XML are also appearing in the Response.
ResponseParams.Add(
newdsResponse()
ACTION = OriginalParams[a].ACTION,
SOURCE = OriginalParams[a].SOURCE,
Manager = OriginalParams[a].Manager,
RequestParams = OriginalParams[a].RequestParams
Where the OriginalParams is dsRequest
Ex: In my update query i will only send three parameters, but in my response building with ablove code, i am getting all the variables defined as INT in the RequestParameters.
Is there any way i can avoid this and build response with only the parameters given in the Request ??
Appreciate ur help..Thanks
Cronsey.Hi Kristin,
My project is, User will be giving the parameters in the excel, and using VBA, the values are captured and an XML is created in the above mentioned format and is send to web service for the Insert/Update.
I created a webservice which reads the values from <datacontract> and it consist of list of <dsRequests> where any number of Insert/Upate commands can be executed, with in which it contains a list of <RequestParams> for multiple insertion/Updation.
//function call
OriginalParams = generator.Function(query, OriginalParams);
where OriginalParams is List<dsRequest>
//inside function
command.Parameters.Add()// parameters adding
int
val = command.ExecuteNonQuery();
after the execution,an XML element is added for the response part.and it is looped for all the RequestParams.
OriginalParams[i].Result.Add(
newResult()
{ ERROR = "No Error",
ROWS_EFFECTEFD = 1 });
//once all the execution is done the response building part
for(inta
= 0; a < OriginalParams.Count; a++)
ResponseParams.Add(
newdsResponse()
Result = OriginalParams[a].Result
QUEST: When i am trying to build response XML with the following code, the parameters which are not given in the Request XML are also appearing in the Response.
Ex: In my update query i will only send three parameters, but in my response building with ablove code, i am getting all the variables defined as INT in the RequestParameters.
Is there any way i can avoid this and build response with only the parameters given in the Request ??
Appreciate ur help..Thanks
Cronsey. -
XML and Web Service Data Source Missing in Crystal Reports for VS
I would like to use a Web Service as the data source for a Crystal Report that will be running outside of my Visual Studio application. So setting the data source to the web service in code is not possible. My understanding is Crystal Reports has a connection (in the Database Expert under New Connection) named XML and Web Service. Here you can select web service and enter the WSDL URL for the web service. However it does not appear in the list for Crystal Reports for Visual Studio. Does this connection type come with the Visual Studio version of Crystal Reports and if not is their a way to obtain it?
Thank you for your assistance.None of the bundled versions of CR have the driver. Reason is that the driver responsible for these connections requires the Java framework and I suspect MS would not be too pleased if we installed the Java framework. The stand alone versions, since they are not part of any bundle can and do install the Java framework and the driver. Note that even the latest release of CR - CRVS2010 does not have the driver as it essentially becomes a bundle or a VS2010 plug-in.
So, the short of it is; you have to obtain a stand-alone version of CR. I'd recommend CR 2008 (12.x) as CRXI R2 will run out of support in June of this year.
- Ludek -
Use Sign.xml and Encrypt.xml for both request AND response within WSDL?
Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
<!-- following WSDL works for encrypting and signing request with X509 in test console -->.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="Message">
<soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
<wsdl:input>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
Or
<!-- following WSDL works for encrypting and signing response with X509 in test console -->
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="Message">
<soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
But not both
<!-- following WSDL doesn't work for encrypting and signing both response and request with X509 in test console -->
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="Message">
<soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
<wsdl:input>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
... Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
<con:reason>
A web service security fault
occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
to get token for tokenType:
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
</con:reason>
<con:details>
<err:WebServiceSecurityFault
xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
soapenv:Server
</err:faultcode>
<err:faultstring>
Failed to get token for tokenType:
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
SamInstead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166 -
Using XSLT to link XML and ABAP data
Hi Experts,
I am using XSLT to deal with XML and ABAP data.
I using the following statement to convert a Internal Table to XML String:
CALL TRANSFORMATION id SOURCE root = lt_sflight RESULT XML l_xml_string.
And I get the XML String:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<SFLIGHT>
</SFLIGHT>
<SFLIGHT>
</SFLIGHT>
</ROOT>
</asx:values>
</asx:abap>
But What I expected is:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<DATA>
</DATA>
<DATA>
</DATA>
</ROOT>
</asx:values>
</asx:abap>
Could you tell me how to get my dream format using XSLT?
Best Regards,
Guo Guo Qing
Edited by: guoqing guo on Jun 11, 2008 9:58 AMHi Experts,
I am using XSLT to deal with XML and ABAP data.
I using the following statement to convert a Internal Table to XML String:
CALL TRANSFORMATION id SOURCE root = lt_sflight RESULT XML l_xml_string.
And I get the XML String:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<SFLIGHT>
</SFLIGHT>
<SFLIGHT>
</SFLIGHT>
</ROOT>
</asx:values>
</asx:abap>
But What I expected is:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<DATA>
</DATA>
<DATA>
</DATA>
</ROOT>
</asx:values>
</asx:abap>
Could you tell me how to get my dream format using XSLT?
Best Regards,
Guo Guo Qing
Edited by: guoqing guo on Jun 11, 2008 9:58 AM -
Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports
Hello All,
We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
Looking forward to your prompt help.
Thanks,
RahulNow, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
I attached a RTF template to the concurrent program to have the output in XML.
When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
I also tried looking into the XML generated through View XMl and there too no output file is generated.
I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
All pointers to this issue are welcome.
Thanks,
Rahul -
Search for a tag in xml and modify the content
Hi,
I am quite new to using xml db and i want to know how to search a xml, modify a tag value inside xml and replace the content in xml.
Please help me to find a solution for this.
Regards,
SprighteeHi,
First important thing : give your database version (SELECT * FROM v$version).
Please also provide some sample data :
- a typical XML document you're working with (or abridged version)
- explain what change(s) you want to do, or give expected output
- if you're using a table to store the XML (which is preferred), give the DDL -
How to create a user using XML and specifying addional attributes that are objects
I'm trying to create a user using XML and specifying some attributes that are objects and not sure how to do it. How would I set the DirectoryUserAcl to Public?
Here's the xml file:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl> ??? </DirectoryUserAcl>
<DefaultAclBundleAcl> ??? </DefaultAclBundleAcl>
<HomeFolderPolicyBundleAcl> ??? </HomeFolderPolicyBundleAcl>
</SimpleUser>I figured out the answer:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl classname="SystemAccessControlList" refType="name">Public</DirectoryUserAcl>
</SimpleUser>
null -
How to store XML and search within tags
My question
===========
exactly what steps do you need follow to take an XML doc, store
it, and query based on a tag value.
The 8i Intermedia text option Reference refers to
XLM_SECTION_GROUP feature. However, no examples are given. There
is no user guide.
I searched Oracle's website and found one reference to
XML_SECTION_GROUP. The example given is a single row insert into
a CLOB column with a single pair of tags.
This whitepaper gives an example of an XML doc, and a query on
it:
XML Support in Oracle8i and Beyond
November 9, 1998
It doesn't list the steps in between storing the doc and quering
it. This is crucial to the whole thing: does XML_SECTION_GROUP
allow all nested tags below the top level to be sectioned and
indexed implicitly? Or do you need to tell Oracle about all the
tags you are interested in, in which case what value is added by
the XLM_SECTION_GROUP?
Does Oracle have some better examples on this?
Below is text cut and pasted from the whitepaper.
-----------x---------
Figure 5: InsuranceClaim Mixes Structured Data and Text
<?xml version="1.0"?>
<InsuranceClaim>
<ClaimID>12345</ClaimID>
<LossCategory>7</LossCategory>
<Settlements>
<Payment>
<Payee>Borden Real Estate</Payee>
<Date>12-OCT-1998</Date>
<Amount>200000</Amount>
<Approver>JCOX</Approver>
</Payment>
</Settlements>
<DamageReport>
A massive <Cause>Fire</Cause> ravaged the building
and
<Casualties>12</Casualties> people were killed.
Early
FBI reports indicate that <Motive>arson</Motive> is
suspected.
</DamageReport>
</InsuranceClaim>
Once instances of iFS file types (including XML-based ones) are
stored in the database, their
content can be searched using standard SQL queries, and these
files can be organized, browsed,
and versioned using familiar tools like the Windows Explorer.
So an insurance agent sees a
directory of InsuranceClaim files sheFs recently worked on in
the field, while an
InsuranceClaim-processing application developer can work with
the information in the
InsuranceClaim in any way he needs to.
XML-Enabled "Section Searches" in ConText
Any XML documents or document fragments saved into "text blobs"
in the database can be
enabled for indexing by Oracle8i InterMediaFs ConText
text-search engine. ConText has been
enhanced for Oracle8i to allow developers to pinpoint their
searches to a particular section of a
document, where sections are implicitly defined by the XML tags
in the document (fragment).
Since ConText is seamlessly integrated into the database and
the SQL language, developers can
use SQL to perform queries that involve both structured data
and indexed document fragments.
For example, Figure 6 shows the SQL statement you would write
to search one million
Insurance Claims in your database to answer the question, "How
much money has Jim Cox
approved to date in settlement payments for arson-related fire
claims? "
Figure 6: Searching on a Column & Text in XML
Sections
SELECT SUM(Amount)
FROM Claim_Header ch,
Claim_Settlements cs,
Claim_Settlement_Payments csp
WHERE csp.Approver = 'JCOX'
AND CONTAINS (DamageReport, 'Arson WITHIN Motive') >
0
AND CONTAINS (DamageReport, 'Fire WITHIN Cause' ) >
0
AND . . . /* Join Clauses */
nullGeoff Ingram (guest) wrote:
: My question
: ===========
: exactly what steps do you need follow to take an XML doc,
store
: it, and query based on a tag value.
: The 8i Intermedia text option Reference refers to
: XLM_SECTION_GROUP feature. However, no examples are given.
There
: is no user guide.
: I searched Oracle's website and found one reference to
: XML_SECTION_GROUP. The example given is a single row insert
into
: a CLOB column with a single pair of tags.
: This whitepaper gives an example of an XML doc, and a query on
: it:
: XML Support in Oracle8i and Beyond
: November 9, 1998
: It doesn't list the steps in between storing the doc and
quering
: it. This is crucial to the whole thing: does XML_SECTION_GROUP
: allow all nested tags below the top level to be sectioned and
: indexed implicitly? Or do you need to tell Oracle about all
the
: tags you are interested in, in which case what value is added
by
: the XLM_SECTION_GROUP?
: Does Oracle have some better examples on this?
: Below is text cut and pasted from the whitepaper.
: -----------x---------
: Figure 5: InsuranceClaim Mixes Structured Data and Text
: <?xml version="1.0"?>
: <InsuranceClaim>
: <ClaimID>12345</ClaimID>
: <LossCategory>7</LossCategory>
: <Settlements>
: <Payment>
: <Payee>Borden Real Estate</Payee>
: <Date>12-OCT-1998</Date>
: <Amount>200000</Amount>
: <Approver>JCOX</Approver>
: </Payment>
: </Settlements>
: <DamageReport>
: A massive <Cause>Fire</Cause> ravaged the building
: and
: <Casualties>12</Casualties> people were killed.
: Early
: FBI reports indicate that <Motive>arson</Motive> is
: suspected.
: </DamageReport>
: </InsuranceClaim>
: Once instances of iFS file types (including XML-based ones)
are
: stored in the database, their
: content can be searched using standard SQL queries, and
these
: files can be organized, browsed,
: and versioned using familiar tools like the Windows
Explorer.
: So an insurance agent sees a
: directory of InsuranceClaim files sheFs recently worked on
in
: the field, while an
: InsuranceClaim-processing application developer can work
with
: the information in the
: InsuranceClaim in any way he needs to.
: XML-Enabled "Section Searches" in ConText
: Any XML documents or document fragments saved into "text
blobs"
: in the database can be
: enabled for indexing by Oracle8i InterMediaFs ConText
: text-search engine. ConText has been
: enhanced for Oracle8i to allow developers to pinpoint their
: searches to a particular section of a
: document, where sections are implicitly defined by the XML
tags
: in the document (fragment).
: Since ConText is seamlessly integrated into the database and
: the SQL language, developers can
: use SQL to perform queries that involve both structured data
: and indexed document fragments.
: For example, Figure 6 shows the SQL statement you would
write
: to search one million
: Insurance Claims in your database to answer the
question, "How
: much money has Jim Cox
: approved to date in settlement payments for arson-related
fire
: claims? "
: Figure 6: Searching on a Column & Text in XML
: Sections
: SELECT SUM(Amount)
: FROM Claim_Header ch,
: Claim_Settlements cs,
: Claim_Settlement_Payments csp
: WHERE csp.Approver = 'JCOX'
: AND CONTAINS (DamageReport, 'Arson WITHIN Motive') >
: 0
: AND CONTAINS (DamageReport, 'Fire WITHIN Cause' ) >
: 0
: AND . . . /* Join Clauses */
Currently you cannot break apart an arbitrary XML doc and store
it into the database without using XSLT to create DDL to insert
it. You can create a schema and have XML be read and written to
it. Check out the XML SQL Utility available here for download.
As for the section searching, in 8.1.5 you can only get section
searching not hierarchical searches. interMedia in this version
doesn't understand the XML structure. This will come in 8.1.6.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null
Maybe you are looking for
-
RGB, CMYK, rotated pages, and PDF error
This is a weird one. I have a FM 9 file. It's a chapter within a book. It has both portrait and landscaped pages. If I "Save as PDF" from FM 9, and do not check "Convert CMYK colors to RGB," the landscaped pages do not rotate to landscape in the PDF
-
How to read tables and fields from a transaction screen.
hi all, i am having problem in reading fields and tables from a screen, could any one help me in mapping tables from a structure as well. it will be very help full if u had any documentation. Thanking u kiran
-
Last question for today - how to draw with API circle of N pixels radius
Hi, While I'm bit of exhausted while fighting with those paths movement (see my other thread in this forum) - I'd like to ask maybe someone has code snippet, which shows how to draw a circle of N pixels/N mm/inches radius? There is one helper functio
-
i plugged my iphone into my computer for the first time to charge it and was in a hurry and walked away, when i returned the add apple i tunes account information screen was up..... my problem is, all my pictures got deleted from my phone, all my con
-
Transfer photos from Picasa PC to Picasa Mac
Hello everyone, I'm about to switch, after so many years, PC to an Imac in the next days. I have to consider how to migrate all my personal work to Mac universe ;-) Among these, all my photos that I manage in Picasa tools, using it to create albums,