XML doesnt gets validated because closed element

Hi,
I have a working map which looks like below:
My question is about the party part. What i do i check for every GLN value in the source is the value is bigger than zero. If that is true then map the value to the gln in the destination element AND add a qualifer value which is hardcoded in the value mapping
functoids.
Everything is working fine but the end xml doesnt get validated because of the next reason:
error btm1046: Output validation error: The element 'party' has incomplete content. List of possible elements expected: 'qual'.
I think it has to do with the closed party tag which is caused by one of the fields in the source that has a value 0.
How can i fix this issue so that my xml gets validated.

Hi,
Please check the 'qual' field in your destination/output schema is a mandatory field. The error you are receiving is because in the output the last party tag is empty wherein it is expecting the element tag 'qual' to be present. Hence, failing in the validation.
Check if you can set that element 'qual' non-mandatory.
Rachit
Please mark the post answered your question as answer, and mark other helpful posts as helpful, it'll help other users who are visiting your thread for the similar problem

Similar Messages

Does income xml request get validated against wsdl?

Hi, there:
I'm using document/literal web service. My question is: Does income xml request get validated automatically against wsdl complex type xml schema? If not is there any configuration way we can set to validate income xml request automatically?
I searched posts in this forum, it seems the same question was asked long long time ago already, but no answer. So, I want to check that question again.
I simply tested my web service by using soapUI, it seems no xml validation implemented on any request at all.
Highly appreciated if any help or comment, thanks a lot in advance.
David

Thank you very much jwenting for the reply. We are using jbossWs.
Yes, I definately agree that it's very cool that wsdl is generated on the fly, and all xml message is parsed to java bean automatically by jaxb. However, my 2 cents is:
1. How can I generate other xml schema restrictions in wsdl on the fly except "enum" (ex. pattern, minInclusive, maxInclusive etc.)? Currently, it seems only @XmlEnum can generate "enum" restriction in wsdl automatically, no other restrictions could be generated automatically in wsdl.
2. Even if I have those restrictions defined manually in wsdl, as it doesn't implement validation on income xml request, and I should do the validation inside my webservice logic, which means that even if I have those xml schema restrictions defined in wsdl, they are useless.
That's the reason I want to check if anyway the validation can be implemented automatically on income xml request.
Again, highly appreciated any further helps or comments. Thanks a lot in advance.
David

[CS3, JS] XML Rules: Get geoBounds of img Element in Same Branch

Hi,
given the following xml structure:
<root>
<entry>
     <img href=""></img>
     <title></title >
     <subtitle></subtitle>
</entry>
<entry>
     <img href=""></img>
     <annotation></annotation>
     <title></title >
     <subtitle></subtitle>
</entry>
</root>
If an annotation tag exists inside an entry, it is transferred into an inlineFrame. The position of this inlineFrame depends on the geometricBounds of the image of this entry. To get the geometricBounds of the img, I tried to climb up the tree (from <annotation> to <entry>) and walk down again (inside the same branch) into the <img>.
Now my question: Is there another (easier) way to get the right xmlElement (<img> inside same <entry> as <annotation>) as with my »for if construction« in the following sample code?
this.xpath = "/root/entry/annotation";
this.apply = function(myElement, myRuleProcessor){
with(myElement){
     var the_anchored_frame = placeIntoInlineFrame([20,7.5]);
     var frameBounds = the_anchored_frame.geometricBounds;
     var theParentElements = myElement.parent.xmlElements;
     for (i=0; i < theParentElements.length; i++) {
          if ( theParentElements[i].markupTag.name == "img" ) {
               var theIMGBounds = theParentElements[i].xmlContent.geometricBounds;
               break;
Thanks
Tobias

I'm a beginner with XML Rules and scripting, but for what it's worth I would go about it by defining a "global" variable. (In case I'm using the wrong terminology, I mean a variable for the entire script rather than one that is limited to a particular function).
For example, before any functions are called, you might add:
var myImageBounds = new Array;
var myRuleSet = new Array (new ProcessEntry,
new ProcessTitle,
new ProcessImg,
new ProcessAnnotation,
new ProcessSubtitle);
with(myDocument){
var elements = xmlElements;
__processRuleSet(elements.item(0), myRuleSet);
...then inside the <img>-processing function get the required info, possibly something like this (using Olav Kvern's very helpful "myGetBounds" function from the standard sample scripts):
function ProcessImg(){
this.name = "ProcessImg";
this.xpath = "/root/entry/img";
this.apply = function(myElement, myRuleProcessor){
with(myElement){
var myBounds = myGetBounds(myDocument, myDocument.pages.item(-1));
myBounds = [myBounds[0]+100, myBounds[1]+100, myBounds[2], myBounds[3]];
var myRectangle = placeIntoFrame(myPage, myBounds);
myRectangle.fit(FitOptions.frameToContent);
myImageBounds = myRectangle.geometricBounds;
return true;
...then inside the <annotation>-processing function use the info you just got:
function ProcessAnnotation(){
this.name = "ProcessAnnotation";
this.xpath = "/root/entry/annotation";
this.apply = function(myElement, myRuleProcessor){
with(myElement){
var the_anchored_frame = placeIntoInlineFrame([20,7.5]);
the_anchored_frame.geometricBounds = myImageBounds;
return true;
That's how I would avoid climbing up and down trees, anyway. But I'm a beginner really, so I may have misunderstood your question.
Jeremy

File Adapte picking up XML if XSD valid without verifing the XSD in adapter

hi',
I am facing one issue
I have a sample XML file which I want to read through BPEL process
for this I have configured the file adapter with the schema and reading the file adapter with the receive activity
next I have created one XSD file (which file adapter referes to) and one XML file,
File adapter reads it after the XML file gets validated with the XSD which is kept in a location *'/test/xsd/emp.xsd'*,
now the issue is that the file adapter is picking up and initiating the process without verifying the XSD mentioned in the adapter
it is only checking the XML file with the XSD mentioned in the XML,
for example if I have a xml file which is refering to some other schema it also gets read by file adapter without worring about what schema is mentioned in file adapter
please advice me is this the way File adapter works in Oracle BPEL or I am doing some thing wrong
I am using SOA suite 10.1.3.3.0 which is deployed in UNIX enviornment.
thanks
Yatan

thanks Ketan ,
as you suggested, after adding validateXML to true, the XML is getting validated to the XSD in the adapter,
the process is getting invoked and the receive activity is throwing error of 'Invalid XML', this is perfect as I expected
however now the issue is, the file which is invalid in terms of XSD present in the file adapter is still being archived to 'success dir' i.e. 'LogicalArchiveDirectory', ideally it should have moved to fail directory,
but if the XML file is not complete or having some error in terms of the XSD it is refering to 'target namespace' and 'target location'
then it will move to the fail directory and the receive activity is also showing the error,
see this is how I have configured my bpel.xml file for the file adapter.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="Read_Tph_ProdTrans_File">
<property name=*"prod_trans_success_file" type="LogicalArchiveDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/success</property>
<property name=*"prod_trans_incoming_file" type="LogicalDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/new</property>
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file:///aaa/bb/ccc/wis/tph/bpl_inbound/adjust/fail</property>
</activationAgent>
please advice how to bring this adapter to proper behaviour.
thanks
Yatan

I am new in indesign scripting, please tell me how to write a script to get content of a element in xml and then sort all the content

I am new in indesign scripting, please tell me how to write a script to get content of a element in xml and then sort all the content

Hi,
May the below code is useful for you, but I dont know how to sort.
Edit the tag as per your job request.
alert(app.activeDocument.xmlElements[0].contents)
//Second alert
var xe = app.activeDocument.xmlElements[0].evaluateXPathExpression("//marginalnote");
alert(xe.length)
for(i=0; i<xe.length; i++)
alert(xe[i].texts[0].contents)
Regards
Siraj

Getting error "this serial number is not valid for Premier Elements 12"

My old computer crashed big time and I'm trying to install Elements 12 on a new computer. Installed ok and when trying to register it, I'm getting the error message "This serial number is not valid for Premier Elements 12." Didn't install Premier Elements 12, just Elements 12. Unable to get any assistance yet from Adobe support, hope to learn something here. Thanks in advance.

Have you activated the product previously on more than two machines? You will need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

HT1941 the apple ID I used when I set up my iCloud account is no longer valid, because in moving to a State where I cannot access the portalI have had to get a new Email address. How do I remove this Apple ID and replace it with a new one...?

The Apple ID that I used to set up my Icloud account is no longer valid because when I moved to another State the Verizon Portal cannot be accessed. How do I cancel this "Primary" Icloud ID to repace it with a new one ???

Hi Davbat2,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the links to see more details and screenshots.
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
http://www.apple.com/support/appleid/
Cheers,
- Judy

XML SAX dtd Validation Problem

Hi,
          I’m having problems getting an xml document to validate within Weblogic 8.1. I am trying to parse a document that references both a dtd and xsd. Both the schema and dtd reference need to be substituted so they use local paths. I specify the schema the parser should use and have created an entityResolver to change the dtd reference.
          When this runs as a standalone app from eclipse the file parses and validates without a problem. When deployed to the app server the process seems to be unable read the contents of the dtd. Its not that it cannot find the file (no FileNotFoundException is thrown but this can be created if I delete the dtd) rather it seems to find no declared elements.
          Initial thought was that the code didn’t have access to read the dtd from its location on disk, to check I moved the dtd to within the deployed war and reference as a resource. The problem still persists.
          Code Snippet:
          boolean isValid = false;
          try {
          // Create and configure factory
          SAXParserFactory factory = SAXParserFactoryImpl.newInstance();
          factory.setValidating(true);
          factory.setNamespaceAware(true);
          // To be notified of validation errors in the XML document,
          // add a custom error handler to the document builder
          PIMSFeedFileValidationHandler handler
          = new PIMSFeedFileValidationHandler();
          // Create and Configure Parser
          SAXParser parser = factory.newSAXParser();
          parser.setProperty(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
          parser.setProperty(NAMESPACE_PROPERTY_KEY, getSchemaFilePath());
          // Set reader with entityResolver for dtd
          XMLReader xmlReader = parser.getXMLReader();
          xmlReader.setEntityResolver(new SAXEntityResolver(this.dtdPath));
          // convert file to URL, as it is a remote file
          URL url = super.getFile().toURL();
          // Open an input stream and parse
          InputStream is = url.openStream();
          xmlReader.setErrorHandler(handler);
          xmlReader.parse(new InputSource(is));
          is.close();
          // get the result of parsing the document by checking the
          // errorhandler's isValid property
          isValid = handler.isValid();
          if (!isValid) {
          LOGGER.warn(handler.getMessage());
          LOGGER.debug("XML file is valid XML? " + isValid);
          } catch (ParserConfigurationException e) {
          LOGGER.error("Error parsing file", e);
          } catch (SAXException e) {
          LOGGER.error("Error parsing file", e);
          } catch (IOException e) {
          throw new FeedException(e);
          return isValid;
          See stack trace below for a little more info.
          2005-01-28 10:24:09,217 [DEBUG] [file] - Attempting validation of file 'cw501205.wa1.xml' with schema at 'C:/pims-feeds/hansard/schema/hansard-v1-9.xsd'
          2005-01-28 10:24:09,217 [DEBUG] [file] - Entity Resolver is using DTD path file:C:/Vignette/runtime_services/8.1/install/common/nodemanager/
          VgnVCMServer/stage/pims-hansard/pims-hansard.war/WEB-INF/classes/com/morse/pims/cms/feed/sax/ISO-Entities.dtd
          2005-01-28 10:24:09,227 [DEBUG] [file] - Creating InputSource at: file:C:/Vignette/runtime_services/8.1/install/common/nodemanager/VgnVCMServer/stage/pims-hansard/pims-hansard.war/WEB-INF/classes/com/morse/pims/cms/feed/sax/ISO-Entities.dtd
          2005-01-28 10:24:09,718 [WARN ] [file] - org.xml.sax.SAXParseException: Element type "Hansard" must be declared.
          org.xml.sax.SAXParseException: Element type "Session" must be declared.
          org.xml.sax.SAXParseException: Element type "DailyRecord" must be declared.
          org.xml.sax.SAXParseException: Element type "Volume" must be declared.
          org.xml.sax.SAXParseException: Element type "Written" must be declared.
          org.xml.sax.SAXParseException: Element type "WrittenHeading" must be declared.
          org.xml.sax.SAXParseException: Element type "Introduction" must be declared.
          … continues for all the elements in the doc
          2005-01-28 10:24:10,519 [DEBUG] [file] - XML file is valid XML? false
          2005-01-28 10:24:10,519 [WARN ] [file] - Daily Part file 'cw501205.wa1.xml' was not valid XML and was not processed.
          Has anybody seen this behavior before with weblogic and if so how have you resolved the issue.
          Thanks in Advance
          Adam

It looks like you clicked on "Post" before you got around to explaining your problem. I don't see any error messages or any description of what was supposed to happen and what happened instead.
Now, I don't know anything about XML Schema, but just guessing at how that unique name feature might be designed, and just guessing that your unique name is actually in the <userId> element, I would suggest that this:
<xsd:unique name="un_name">
<xsd:selector xpath="USER"/>
<xsd:field xpath="."/>
</xsd:unique> is at fault because it doesn't mention the <userId> element anywhere.

DPM 2012 R2 install fail - Reporting services "definition contains XML that is not well-formed or the XML is not valid"

Hi Everyone,
I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
Server OS: 2008R2 SP1
SQL: 2008 R2 standard with SP3(tried SP2 before this)
Collation: SQL_Latin1_General_CP1_CI_AS
Reporting services installed: Yes(ticked do not configure during the installation)
Enabled reporting servics on port 80 with the default URL
DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
Basically, when Installing. I get this error(extract):
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[10/12/2014 2:35:25 p.m.] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
Any ideas?
I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).

Can you try following steps:
If there are SSL certificates on your computer, by default SQL 2008
installation configures HTTPS for reporting websites. When DPM tries to
deploy reports on these websites it may fail if the reporting websites
are not accessible (might be due to invalid/expired certificates). To
workaround this, provided you do not require HTTPS for reporting websites do
the following:
1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
Services\ReportServer\rsreportserver.config
2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
2 means secure connection is required)
3. Connect to SQL reporting service configuration manager and connect to the
instance MSDPMV3BETA1EVAL
4. Click on Web Service URL, click advanced and remove SSL identities
5. Repeat the above for Report Manager URL
6. Make sure report manager URL and web service URL are accessible with out
any errors.
6. Restart report server
If that doesn't solve the problem, please try following steps:
1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
Server Configuration Manager
2. Connect to the instance which the DPM is using to install.
3. Browse Report Manager URL and web service url
4. If report manager URL or web service url throws any error say 500 or 404
fix the error. (Try also replacing machine name with localhost in url)
5. Otherwise delete DPMReports folder (if present) using below instructions
6. Restart reporting services
7. Try DPM setup again.
Deleting DPM reports:
1. Open report manager URL in IE
2. Click show details on right hand side
3. Put a tick against DPMReports folder
4. Click Delete button.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error o

When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

The reason is in the first line of the error. It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column. You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
In order to fix the problem, you're going to need to increase the allocated space for that column. In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file. If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors". Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
Talk to me on

XML Document not Valid

Hi Techies,
I m making a xml document and that is validated on xml schema. But it is giving error that document is not valid because it is not deg\fining DOCTYPE element. Is it necessary to define it

It is not nesessary, but you have probably made your parser validating. In Java validating parsers use DTD to validate, and while schema validation is possibly those parsers are non-validating.

Supplied XML is not valid

Hi All,
While refreshing a Webi report, I am getting following error:
"A database error occured. The database error text is: The supplied XML is not valid. [Measures].[0701FBYSYG9KJQ47GRMMAVZ89]. (WIS 10901) ".
Could you please let me know how to resolve it?
Regards,

definition of one of your measure objects selected in the webi query is not correct in the universe. Parse the objects in the universe and find the objects with incorrect definition. This may be due to deletion of a key figure from BEx query. You can refresh the universe structure for updating it.

How to get the current tree element (node/childnode/childnode/...) ?

Hello!
I'm trying to create a kind of a navigation tree for my application.
It should represent some elements of an XML structure and some other nodes for other options.
The binding with the context is not a problem, I can create the tree up to all the levels I want to.
The problem now is, that I don't know, how to get the "current tree element", when there is any action.
For example:
public void onActionSelect(...) {
String test = wdContext.currentTreeNodeElement().getText();
wdThis.wdGetContext().currentContextElement().setSelectedElement(test);
With this method I can get the text of the "first level nodes". If I want to get the "second level node", I can do
String test = wdContext.currentTreeNodeElement().currentChildElement.getText();
..and for the next levels so on.
Isn't there any general method to get the information of the selected element without knowing before, whether it is a nodeElement or a nodeElement.currentChildElement or a nodeElement.currentChildElement.currentChildElement, ...?
Greetings,
Ramó

Hi,
if you following that pdf ,
i think your not implemented the below code in DomodifyView method
if (firstTime) {
      IWDTreeNodeType treeNode = (IWDTreeNodeType) view.getElement("TheNode");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "selectedElement".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onAction event. Parameter "selectedElement" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onAction. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnAction().addSourceMapping("path", "selectedElement");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "element".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onLoadChildren event. Parameter "element" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onLoadChildren. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnLoadChildren().addSourceMapping("path", "element");
please cross check once.
Thanks,
Ramesh

How to get data from a element?

Hi!
I'm try to get data in an element, below is my xml document
<?xml version="1.0" encoding="UTF-16" ?>
<!ELEMENT Group (GID, Description?)>
<!ATTLIST Group Name CDATA #REQUIRED>
<!ELEMENT GID (#PCDATA)>
<!ELEMENT Description (#PCDATA)>
<?xml version="1.0" encoding="UTF-16" ?>
<!DOCTYPE Group SYSTEM "group.dtd">
<Group Name="AdminGroup">
<GID>000</GID>
<Description>System administrating group</Description>
</Group>
And I try to get data of GID:
NodeList nlx = doc.getElementsByTagName("GID");
Node nodex = nlx.item(0);
System.out.println("Element Node name: "
nodex.getNodeName()"]");
System.out.println("Element Node value: ["
nodex.getNodeValue()"]");
the output is:
Element Node name: [GID]
Element Node value: [null]
How can I get the data of GID("000")??

nodex is a node of type Node.ELEMENT_NODE, now to access the value of that node you should go through the collection of childs of this node and locate the one with type Node.TEXT_NODE (there should be only one child anyway) and there you can ask for the value. That translated into code should be something like:
NodeList childs = nodex.getChildNodes();
for ( int i = 0; i < childs.getLength(); i++ ) {
Node childNode = childs.item( i );
     int type = childNode.getNodeType();
     if ( type == Node.TEXT_NODE )
          System.out.println("Element Node value: ["+childNode.getNodeValue()+"]");

FAQ: How do I get started with Photoshop Elements Editor, or What do all these tools do?

Opening an image editing application for the first time can be intimidating. The more powerful the tool, the more complicated it can be to learn to use. Below are a list of resources to help you get started with the Photoshop Elements Editor.
I just bought Photoshop Elements, where do I start?
There are a lot of directions you can go when you first make your purchase. Here is your first roadmap.
Getting Started Tutorials
What do all these terms mean?
There are some common words tossed around when talking about image editing or tool use. Here is a helpful guide to define these: Photoshop Elements key concepts
Photoshop Element Help Topics:
Workspace basics
Tools
Color and tonal correction basics
Elements Basics, an overview of Elements' essential concepts on Photoshop Elements User.com
Where can I find some tutorials on the web?
There are many resources for learning Photoshop Elements on the internet. Here are some that we recommend.
Photoshop Elements: Where can I find some good basic tutorials? on the Photoshop Feedback site.
Like Photoshop Elements on Facebook for daily tutorials and inspiration. As well as the occasional contest.
Editing Tutorials for Photoshop Elements on Photoshop.com
Getting Started with the Elements Editor on Photoshop Elements User.com
Photoshop Elements for Dummies.com
What about video tutorials?
Some find it easier to watch a product being demonstrated and explained by an expert
Learn Photoshop Elements 11 on Adobe TV
Photoshop Elements channel on YouTube
Where can I find books about learning Photoshop Elements?
Photoshop Elements books on Pearson Peachpit Press

Hi Christoph and WarriorAnt,
Thank you both for the replies.
I don't know anything about GarageBand because I've never used it. I've never used any music software before, (other than iTunes, Ha!)
I don't have GarageBand on my Mac because it wasn't stock on the old Powerbook G4, so I would have to buy it. I'm happy to do that if I can figure out that it does what I want ... but I'm overwhelmed by the info at Apple's site. Too much for a beginner like me. Even the wikipedia.com entry for GB uses too many terms I don't know, so I'm easily lost.
I just want to be able to set up drum loops and play along with them. The main thing is that I'm able to use third party loops. There are so many really amazing loop products out there ... jungle drums, acoustic jazz drums, lounge, etc. I don't want to get caught up in anything proprietary (like Band-In-A-Box) because the selection is limited. I'm sure GarageBands loops are great, but I want access to all these other third party loops as well ... loops that were not specifically made for GarageBand.
Will GarageBand let me drop in any and all drum loops from these other companies?
And does GarageBand work like a basic sequencer, where I can program up an intro, X number of measures of a loop, then a turnaround, then a variation loop, then an ending, etc?
I know the high-end stuff like Native Instruments Kontakt does this, but unfortunately it also does a kazillion other professional-level things I will never need and don't want to pay for (and which make the software more complex and daunting).
Thank you again, both of you, for responding and helping me with this project.
Just a little more advice on those two questions would really go a long way.
-JOHN

XML doesnt gets validated because closed element

Similar Messages

Maybe you are looking for