Xml parsing issue when xmlns present xquery sqlserver

Hi ,
I have this xml
declare @xml xml
set @xml ='<students xmlns="http://www.abcdef.com/pqrs/1.3.0" xsi:schemaLocation="http://www.abcdef.com/pqrs/1.3.0_f3">
<student>
<id>1</id>
<name>aaa</name>
</student>
</students>'
when I am xquering this data like below.
select
s.n.value('(id/text())[1]', 'varchar(50)') as id ,
s.n.value('(name/text())[1]','varchar(50)') as name
from
@XML.nodes('/students/student') as S(N)
Its not returning any rows. But when I remove the below lines in xml.
xmlns="http://www.abcdef.com/pqrs/1.3.0" xsi:schemaLocation="http://www.abcdef.com/pqrs/1.3.0_f3"
Its working fine. 
can any one tell me what is the reason ? how to over come this ?
Thanks in advance.

Hello,
It seems contain incorrect "schemaLocation" in the definition, please refer to the following T-SQL below:
declare @xml xml
set @xml ='<students xmlns="http://www.abcdef.com/pqrs/1.3.0">
<student>
<id>1</id>
<name>aaa</name>
</student>
</students>';
; with xmlnamespaces (default 'http://www.abcdef.com/pqrs/1.3.0')
select
s.n.value('(id/text())[1]', 'varchar(50)') as id ,
s.n.value('(name/text())[1]','varchar(50)') as name
from
@XML.nodes('/students/student') as S(N)
Regards,
Elvis Long
TechNet Community Support

Similar Messages

  • XML Parse issues when using Network Data Model LOD with Springframework 3

    Hello,
    I am having issues with using using NDM in conjuction with Spring 3. The problem is that there is a dependency on the ConfigManager class in that it has to use Oracle's xml parser from xmlparserv2.jar, and this parser seems to have a history of problems with parsing Spring schemas.
    My setup is as follows:
    Spring Version: 3.0.1
    Oracle: 11GR2 and corresponding spatial libraries
    Note that when using the xerces parser, there is no issue here. It only while using Oracle's specific parser which appears to be hard-coded into the ConfigManager. Spring fortunately offers a workaround, where I can force it to use a specific parser when loading the spring configuration as follows:
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl But this is an extra deployment task we'd rather not have. Note that this issue has been brought up before in relation to OC4J. See the following link:
    How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3
    My question is, is there any other way to configure LOD where it won't have the dependency on the oracle parser?
    Also, fyi, here is the exception that is occurring as well as the header for my spring file.
    org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException:
    Line 11 in XML document from URL [file:/C:/projects/lrs_network_domain/service/target/classes/META-INF/spring.xml] is invalid;
    nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
         at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:396)
         [snip]
         ... 31 more
    Caused by: oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
         at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:425)
         at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:331)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:222)
         at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
         at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:75)
         at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:388)Here is my the header for my spring configuration file:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
           xmlns:aop="http://www.springframework.org/schema/aop"
           xmlns:tx="http://www.springframework.org/schema/tx"
           xmlns:context="http://www.springframework.org/schema/context"
           xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
           http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd
           http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd
           http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">Thanks, Tom

    I ran into this exact issue while trying to get hibernate and spring working with an oracle XMLType column, and found a better solution than to use JVM arguments as you mentioned.
    Why is it happening?
    The xmlparserv2.jar uses the JAR Services API (Service Provider Mechanism) to change the default javax.xml classes used for the SAXParserFactory, DocumentBuilderFactory and TransformerFactory.
    How did it happen?
    The javax.xml.parsers.FactoryFinder looks for custom implementations by checking for, in this order, environment variables, %JAVA_HOME%/lib/jaxp.properties, then for config files under META-INF/services on the classpath, before using the default implementations included with the JDK (com.sun.org.*).
    Inside xmlparserv2.jar exists a META-INF/services directory, which the javax.xml.parsers.FactoryFinder class picks up and uses:
    META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines oracle.xml.jaxp.JXDocumentBuilderFactory as the default)
    META-INF/services/javax.xml.parsers.SAXParserFactory (which defines oracle.xml.jaxp.JXSAXParserFactory as the default)
    META-INF/services/javax.xml.transform.TransformerFactory (which defines oracle.xml.jaxp.JXSAXTransformerFactory as the default)
    Solution?
    Switch all 3 back, otherwise you'll see weird errors.  javax.xml.parsers.* fix the visible errors, while the javax.xml.transform.* fixes more subtle XML parsing (in my case, with apache commons configuration reading/writing).
    QUICK SOLUTION to solve the application server startup errors:
    JVM Arguments (not great)
    To override the changes made by xmlparserv2.jar, add the following JVM properties to your application server startup arguments.  The java.xml.parsers.FactoryFinder logic will check environment variables first.
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    However, if you run test cases using @RunWith(SpringJUnit4ClassRunner.class) or similar, you will still experience the error.
    BETTER SOLUTION to the application server startup errors AND test case errors:
    Option 1: Use JVM arguments for the app server and @BeforeClass statements for your test cases.
    System.setProperty("javax.xml.parsers.DocumentBuilderFactory","com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl");
    System.setProperty("javax.xml.parsers.SAXParserFactory","com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl");
    System.setProperty("javax.xml.transform.TransformerFactory","com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl");
    If you have a lot of test cases, this becomes painful.
    Option 2: Create your own Service Provider definition files in the compile/runtime classpath for your project, which will override those included in xmlparserv2.jar.
    In a maven spring project, override the xmlparserv2.jar settings by creating the following files in the %PROJECT_HOME%/src/main/resources directory:
    %PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl as the default)
    %PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.SAXParserFactory (which defines com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl as the default)
    %PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.transform.TransformerFactory (which defines com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl as the default)
    These files are referenced by both the application server (no JVM arguments required), and solves any unit test issues without requiring any code changes.
    This is a snippet of my longer solution for how to get hibernate and spring to work with an oracle XMLType column, found on stackoverflow.

  • XML parser error; when XPath elements starts with "_"

    Hi,
    I have a problem in extracting elements from XML which is starting with "_". please check the queries below executed on Oracle 10g.
    Query 1:
    SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/_B') FROM DUAL;
    Error starting at line 1 in command:
    SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/_B') FROM DUAL
    Error report:
    SQL Error: ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: '/A/_B'
    31011. 00000 - "XML parsing failed"
    *Cause:    XML parser returned an error while trying to parse the document.
    *Action:   Check if the document to be parsed is valid.
    Query 2:
    SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/E') FROM DUAL;
    EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/E')
    4
    Oracle version:
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE     10.2.0.1.0     Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Please let me know if there is any workaround for this.*
    Thanks,
    Veerababu Kanumilli.

    Hi MichaelS,
    - I have executed the queries provided by you, but I am not able to get the result in 10g when I am trying to access elements with "_" in XPath.
    select * from v$version where rownum = 1;
    select extractvalue (xmltype ('&lt;A&gt;<_B>1</_B><_C>2</_C><_D>3</_D><E>4</E>&lt;/A&gt;'), '/A/_B') "_B" from dual;
    select extractvalue (xmltype ('&lt;A&gt;<_B>1</_B><_C>2</_C><_D>3</_D><E>4</E>&lt;/A&gt;'), '/A/E') "E" from dual;
    Output:
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    Error starting at line 4 in command:
    select extractvalue (xmltype ('&lt;A&gt;<_B>1</_B><_C>2</_C><_D>3</_D><E>4</E>&lt;/A&gt;'), '/A/_B') "_B" from dual
    Error report:
    SQL Error: ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: '/A/_B'
    31011. 00000 - "XML parsing failed"
    *Cause:    XML parser returned an error while trying to parse the document.
    *Action:   Check if the document to be parsed is valid.
    E
    4
    Thanks,
    Veerababu Kanumilli

  • XML Parsing Error when opening Dreamweaver CS4

    Hi guys, I downloaded a trial version of Dreamweaver CS4
    which was downloaded from the adobe website and once i try
    installing it it comes up with 'please delete current menus.xml
    file and then rename menus.bak file to menus.xml'. Once I tried
    that the new renamed xml file has the same problem as the old one.
    Now, When i opened up the file in Firefox it came up with an XML
    Parsing error. The exact error is as below:
    XML Parsing Error: prefix not bound to a namespace
    Location:
    file:///C:/Program%20Files/Adobe/Adobe%20Dreamweaver%20CS4/configuration/Menus/menus.xml
    Line Number 12, Column 5: <shortcut
    mmstring:name="menus/DWShortcuts_Main_Quit" key="Opt+F4"
    command="dw.quitApplication()" id="DWShortcuts_Main_Quit" />
    ----^
    I am running windows XP SP3. Can anyone offer an
    insight/possible solution? I've already tried the following methods
    which have been suggested by other forums:
    CS4 clean script on Adobe website
    Microsoft installer clean up
    uninstall and reinstall all CS4/adobe products
    deleting Cache.db
    deleting Macromedia folder
    deleting faulty line in menus.xml file
    Is there anything else I can do? Thanks guys!

    1) Close Dreamweaver
    2) Navigate to the Design.xml file and rename it.
    3) Launch Dreamweaver and it will recreate the Design.xml file
    The AppData folder is hidden by default on Windows, so you need to enable the option to view hidden files and folders in order to locate it, as follows:
    In Vista/Windows 7, select Start > Computer > Organize > Folder and Search Options > View. In Advanced settings, choose Show hidden files and folders. 
    In Windows XP, select Start > My Computer > Tools > Folder Options > View. In Advanced settings, choose Show hidden files and folders.
    Once you turn on this option, hidden folders are displayed as dimmed icons to remind you to treat them with care.

  • XML parse Exception when running when dynpro

    Hello,
    When I try to run my web dynpro I get the following error.
    org.xml.sax.SAXException: Fatal Error: URI=:main: Line=7: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(:main:, row:7, col:50)
    The error occured after I reimported my model. We're on SP13 on both the Developer Studio and WAS.

    I found something interesting on the error page, it seems I'm missing SapDictionaryGenerationCore.
    SapDictionaryGenerationCore 6.4012.00.0000.20050331142541.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:59:41[UTC], changelist=339145, host=PWDFM026.wdf.sap.corp) sap.com/tc~wd~dispwda
    No information available
    sap.com/tc~wd~corecomp
    No information available
    SapDictionaryGenerationTemplates 6.4012.00.0000.20050331142541.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:59:52[UTC], changelist=339145, host=PWDFM026.wdf.sap.corp)
    SapGenerationFrameworkCore 6.4012.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:52:59[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 6.4012.00.0000.20050407155601.0000 (release=630_VAL_REL, buildtime=2005-04-21:20:06:39[UTC], changelist=340806, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCommon 6.4012.00.0000.20050414173816.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:53:54[UTC], changelist=342170, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCore 6.4012.00.0000.20050414173816.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:53:45[UTC], changelist=342170, host=PWDFM026.wdf.sap.corp)
    SapMetamodelDictionary 6.4012.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:57:09[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
    SapMetamodelWebDynpro 6.4012.00.0000.20050121170001.0000 (release=630_VAL_REL, buildtime=2005-04-21:20:03:01[UTC], changelist=322883, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 6.4012.00.0000.20050419173537.0000 (release=630_VAL_REL, buildtime=2005-04-21:20:19:03[UTC], changelist=342907, host=PWDFM026)
    SapWebDynproGenerationCore 6.4012.00.0000.20050407155601.0000 (release=630_VAL_REL, buildtime=2005-04-21:20:07:08[UTC], changelist=340806, host=PWDFM026.wdf.sap.corp)

  • Adobe Designer 7.0 - XML parsing error when data connection to XML with UTF-16

    Hi all
    <br />
    <br />I need to change my data connection xml file to use UTF-16 instead of ISO-8859-1. When I connect the file with the UTF-16 encoding, I receive the following error
    <br />
    <br />Invalid XML: Xml parsing error: encoding specified in XML declaration is incorrect (error code 19) ..
    <br />
    <br />The XML declaration is:
    <br /><?xml version="1.0" encoding="utf-16"?>
    <br />
    <br />I am able to succesfully set the encoding to "UTF-8". UTF-16 should also be possible.
    <br />
    <br />Has anyone seen this error before ? How can I resolve this ?
    <br />
    <br />Thanks in advance
    <br />
    <br />Bilal Haniff

    Thank you, expert, for your quick reply.
    Described problem got solved: we noticed later that the extra text only appears for users using Adobe professional 7.0, 'normal' users with adobe 8.0 reader don't get the extra text, so that is ok for us.

  • Xcelsius XML Connection Issue when using a Crystal created XML file

    HI Xcelsius/Crystal Gurus,
    I am running Crystal Reports 2008 version 12.2.9.698 and Xcelsius 2008 5.3.0.0 Build 12,3,0,670,
    I am attempting to create an XML file from a Crystal report which will be consumed by an Xcelsius Dashboard.  Apparently, there is something with the file that Xcelsius does not like.
    I have formatted the report exactly as Xcelsius requires and exporting via text with an xml extension to create an .xml file.  When I add an XML Connection in Xcelsius and add the appropriate names/range, etc...I am able to see the file via the Preview XML button on the Connection, but when I use a component, I am not seeing the data in the component.
    I can 'recreate' the file in NotePad by manually typing in the entries to look exactly like the file created by Crystal and set up a connection in Xcelsius to consume that file and it works beautifully.
    Does anyone have any experience with using Crystal Reports to create an XML file (not using the XML Export, but by exporting as a Text and adding an extension)?
    Is it possible that Crystal is adding hidden characters or something?  I can pull this Crystal created file into an XML editor or MS Word and it is validated as a good XML File.
    Any help is greatly appreciated!

    This article is all about setting up security on the web service. But, I just want to connect to the web service as a client using the proxy and the web service doesn't have any security set on it at this time.
    I am getting a connection timeout, even when I set the syncMaxWaitTime in the domain.xml file on the app server to a higher number (although this doesn't seem to affect the time it takes for the debugger to return).

  • UCSPE XML parsing error when importing from live UCS

    Hi all,
    I'm trying to import our live UCS hardware inventory in to the UCS platform emulator but keep getting an error stating:
    Server Error: code ERR-xml-parse-error: XML PARSING ERROR: no class named computeExtBoard
    The UCSPE imports all of our chassis' and blade servers, but it's missing all the chassis fans and psus, and the dimms, hdds, cpus, and storage controllers from all the blades. I haven't been able to figure out how to download or export the hardware inventory from the live UCS Manager as an XML for editing/loading in to UCSPE. It looks like you can only export as XML from USCPE, not from UCS Manager. Anybody have experience dealing with this?
    Thanks in advance!
    Jordan

    Hi all,
    I'm trying to import our live UCS hardware inventory in to the UCS platform emulator but keep getting an error stating:
    Server Error: code ERR-xml-parse-error: XML PARSING ERROR: no class named computeExtBoard
    The UCSPE imports all of our chassis' and blade servers, but it's missing all the chassis fans and psus, and the dimms, hdds, cpus, and storage controllers from all the blades. I haven't been able to figure out how to download or export the hardware inventory from the live UCS Manager as an XML for editing/loading in to UCSPE. It looks like you can only export as XML from USCPE, not from UCS Manager. Anybody have experience dealing with this?
    Thanks in advance!
    Jordan

  • XML Parsing Error when diplaying the downloads window

    After upgrading to the 3.6.15 version everytime I open the downloads window the following text is displayed:
    XML Parsing Error: unclosed token
    Location: chrome://mozapps/content/downloads/downloads.xul
    Line Number 83, Column 5: <menuitem id="menuitem_show"
    ----^

    After upgrading to the 3.6.15 version everytime I open the downloads window the following text is displayed:
    XML Parsing Error: unclosed token
    Location: chrome://mozapps/content/downloads/downloads.xul
    Line Number 83, Column 5: <menuitem id="menuitem_show"
    ----^

  • Xml parser issue

    My xml is huge almost 6 mb in size. So it is not coming in one line and it is present in database as clob field

    We are supposed to read/parse from an xml with the below sample data structure-<ns5:benefitComponent desc="A" level="1" name="a">                  <ns5:childBenefits>                     <ns5:benefitComponent desc="B" level="2" name="b"> As shown above while parsing the xml , only two tags namely “desc” and “name” are  present under benefitComponent(an XML object – as shown above). But when connected to the target ,only one record is coming through with the value ->desc='A', name='a'  from Level =1 and not the other one (<ns5:benefitComponent desc="B" level="2" name="b">) from Level =2. This shouldn’t be the outcome ideally as the XSD properly defines the hierarchy .Bobj1 Contains à ChildBobjà Bobj1(again called from Child Bobj) How to get both the two records  from level 1 as well as level 2 in same target table.

  • HTTP sender Adapter - XML parsing issue in SAP PI

    Dear All,
    We have a scenario where HTTP sends data to JDBC.
    We shared the URL with Sender application and they are trying to send the data to PI using URL.
    But when it comes to PI Integration Engine, we noticed the inbound payload in Plain text.
    Sender Application showed their logs and data they are sending is in XML format.
    Any pointers on this issue ? Do we need to do any settings from PI end?
    Regards,
    Srini

    Hi,
      Check the xml document having the code page UTF-8.
    Regards,
    Prakasu.M

  • Xml parsing issue with the existsnode function

    Hi Friends,
    I have a question as like below
    We have the contacts and alternate contacts request as like below.
    <TXLife>
    <UserAuthRequest>
    <UserLoginName>hqtest24</UserLoginName>
    <UserDate>2012-07-11</UserDate>
    <UserTime>12:42:55</UserTime>
    </UserAuthRequest>
    <TXLifeRequest>
    <TransRefGUID>0c95642d-663a-455f-bd92-aca678538986</TransRefGUID>
    <TransType tc="1204">OLI_TRANS_TRNPARTY</TransType>
    <TransExeDate>2012-07-11</TransExeDate>
    <TransExeTime>12:42:55</TransExeTime>
    <InquiryLevel tc="3">OLI_INQUIRY_OBJRELOBJ</InquiryLevel>
    <InquiryView>
    <InquiryViewCode>INTERMEDIARYUPDATE-CHBM-1204A</InquiryViewCode>
    </InquiryView>
    <OLifE>
    <SourceInfo>
    <SourceInfoName>CHBM Admin Tool</SourceInfoName>
    </SourceInfo>
    <Party id="Intermediary1">
    <PartyTypeCode tc="2">OLI_PT_ORG</PartyTypeCode>
    <PartySysKey SystemCode="CHBM">111259</PartySysKey>
    <FullName>Example Law Firm test</FullName>
    <Organization>
    <DBA>Example Law Firm test</DBA>
    </Organization>
    <Address>
    <AddressTypeCode tc="2">OLI_ADTYPE_BUS</AddressTypeCode>
    <Line1>20 Yellow Brick Rd</Line1>
    <Line2>Suite 23</Line2>
    <Line3>line 3</Line3>
    <City>wonderland34</City>
    <AddressState>NY</AddressState>
    <Zip>229292</Zip>
    <AddressCountry>US</AddressCountry>
    </Address>
    <Phone>
    <PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
    <DialNumber></DialNumber>
    </Phone>
    <Phone>
    <PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
    <DialNumber></DialNumber>
    </Phone>
    <Attachment id="Attachment1">
    <DateCreated>2012-07-11</DateCreated>
    <UserCode>hqtest24</UserCode>
    <AttachmentBasicType tc="1">Text</AttachmentBasicType>
    <AttachmentSource>ATTORNEY</AttachmentSource>
    <Description>INTERMEDIARY TYPE UPDATED</Description>
    <AttachmentData>Attorney</AttachmentData>
    <AttachmentType tc="1009800001">Transaction Log</AttachmentType>
    <AttachmentLocation tc="1">Inline</AttachmentLocation>
    <OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
    <AttachmentExtension>
    <CreationTime>12:42:55</CreationTime>
    <Sequence>1</Sequence>
    </AttachmentExtension>
    </OLifEExtension>
    </Attachment>
    <Attachment id="Attachment2">
    <DateCreated>2012-07-11</DateCreated>
    <UserCode>hqtest24</UserCode>
    <AttachmentBasicType tc="1">Text</AttachmentBasicType>
    <AttachmentSource>James</AttachmentSource>
    <Description>ALTERNATE CONTACT FIRST NAME UPDATED</Description>
    <AttachmentType tc="1009800001">Transaction Log</AttachmentType>
    <AttachmentLocation tc="1">Inline</AttachmentLocation>
    <OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
    <AttachmentExtension>
    <CreationTime>12:42:55</CreationTime>
    <Sequence>2</Sequence>
    </AttachmentExtension>
    </OLifEExtension>
    </Attachment>
    <Attachment id="Attachment3">
    <DateCreated>2012-07-11</DateCreated>
    <UserCode>hqtest24</UserCode>
    <AttachmentBasicType tc="1">Text</AttachmentBasicType>
    <AttachmentSource>Mathew</AttachmentSource>
    <Description>ALTERNATE CONTACT LAST NAME UPDATED</Description>
    <AttachmentType tc="1009800001">Transaction Log</AttachmentType>
    <AttachmentLocation tc="1">Inline</AttachmentLocation>
    <OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
    <AttachmentExtension>
    <CreationTime>12:42:55</CreationTime>
    <Sequence>3</Sequence>
    </AttachmentExtension>
    </OLifEExtension>
    </Attachment>
    <EMailAddress>
    <EMailType tc="1">Business</EMailType>
    <AddrLine></AddrLine>
    </EMailAddress>
    <URL>
    <URLAddr>www.example.com</URLAddr>
    <URLType tc="1">Home Page</URLType>
    </URL>
    </Party>
    <Activity id="Activity1" HoldingID="Intermediary1">
    <UserCode>hqtest24</UserCode>
    <LastUpdate>2012-07-11</LastUpdate>
    <ActivityCode>CHBM10004</ActivityCode>
    <OLifEExtension VendorCode="0098" ExtensionCode="Activity">
    <ActivityExtension>
    <SubActivityCode>CHBM20002</SubActivityCode>
    <LastUpdateTime>12:42:55</LastUpdateTime>
    </ActivityExtension>
    </OLifEExtension>
    </Activity>
    <Party id="Contact1">
    <PartyTypeCode tc="1">OLI_PT_PERSON</PartyTypeCode>
    <PartySysKey>555223</PartySysKey>
    <Person>
    <FirstName>Jack</FirstName>
    <LastName>Scarecrow23</LastName>
    </Person>
    <Phone>
    <PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
    <DialNumber>2223993993</DialNumber>
    </Phone>
    <Phone>
    <PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
    <DialNumber>2223392020</DialNumber>
    </Phone>
    <EMailAddress>
    <EMailType tc="1">Business</EMailType>
    <AddrLine>[email protected]</AddrLine>
    </EMailAddress>
    </Party>
    <Relation id="Relation1" OriginatingObjectID="Intermediary1" RelatedObjectID="Contact1">
    <RelationRoleCode tc="150">Authorized Person</RelationRoleCode>
    </Relation>
    <Relation id="Relation1" OriginatingObjectID="Intermediary1">
    <RelationRoleCode tc="104">Intermediary</RelationRoleCode>
    <RelationDescription tc="42">Attorney</RelationDescription>
    </Relation>
    <Party id="Contact2">
    <PartyTypeCode tc="1">OLI_PT_PERSON</PartyTypeCode>
    <PartySysKey>556915</PartySysKey>
    <Person>
    <FirstName/>
    <LastName/>
    </Person>
    <Phone>
    <PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
    <DialNumber>2343434</DialNumber>
    </Phone>
    <Phone>
    <PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
    <DialNumber>45345345</DialNumber>
    </Phone>
    <EMailAddress>
    <EMailType tc="1">Business</EMailType>
    <AddrLine>[email protected]</AddrLine>
    </EMailAddress>
    </Party>
    <Relation id="Relation4" OriginatingObjectID="Intermediary1" RelatedObjectID="Contact2">
    <OriginatingObjectType tc="6">Party</OriginatingObjectType>
    <RelatedObjectType tc="6">Party</RelatedObjectType>
    <RelationRoleCode tc="150">Authorized Person</RelationRoleCode>
    <InterestPercent>-1.0</InterestPercent>
    <Sequence>2</Sequence>
    </Relation>
    </OLifE>
    </TXLifeRequest>
    </TXLife>
    From the above request we have to parse the alternate contact details.
    In the procedure we are using as like below
    FOR b IN (
    SELECT t.vAltCntcity vAltCntcity,
    t.Partysyskey Partysyskey,
    t.vAltCntZip vAltCntZip,
    t.vAltCntGovtID vAltCntGovtID,
    t.vAltCntTelno vAltCntTelno,
    t.vAltCntemailaddr vAltCntemailaddr,
    t.vAltCntstats vAltCntstats,
    t.vAltCntAdd1 vAltCntAdd1,
    t.vAltCntAdd2 vAltCntAdd2,
    t.vAltCntAdd3 vAltCntAdd3,
    t.AltCntstate AltCntstate,
    t.AltCntcntry AltCntcntry,
    t.vAltCntBRTH_DT vAltCntBRTH_DT,
    t.vAltCntGender vAltCntGender,
    t.vAltCntFaxno vAltCntFaxno,
    t.vAltCnturladdr vAltCnturladdr,
    t.AltCntorgFST_NM AltCntorgFST_NM,
    t.AltCntorgLST_NM AltCntorgLST_NM,
    t.AltCntorgMID_NM AltCntorgMID_NM,
    t.AltCntorgPFX_NM AltCntorgPFX_NM,
    t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
    t.AltCntpartytypecode AltCntpartytypecode,
    t.vAltCntdatarep vAltCntdatarep,
    t1.vAltCntInterestPercent vAltCntInterestPercent,
    t1.ROID ROID
    FROM (
    SELECT xData doc FROM dual ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
    COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
    , ROID varchar2(50) path '@RelatedObjectID'
    , vAltCntInterestpercent varchar2(100) path 'InterestPercent'
    )t1,
    XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
    COLUMNS
    vAltCntcity VARCHAR2(20) path 'City',
    Partysyskey VARCHAR2(100) path 'PartySysKey',
    vAltCntZip VARCHAR2(20) path 'Address/Zip',
    vAltCntGovtID VARCHAR2(20) path 'GovtID',
    vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
    vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
    vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
    vAltCntAdd1 varchar2(1000) path 'Address/Line1',
    vAltCntAdd2 varchar2(1000) path 'Address/Line2',
    vAltCntAdd3 varchar2(1000) path 'Address/Line3',
    AltCntstate varchar2(100) path 'Address/AddressState',
    AltCntcntry varchar2(100) path 'Address/AddressCountry',
    vAltCntBRTH_DT date path 'Person/BirthDate',
    vAltCntGender char(1) path 'Person/Gender/@tc',
    vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
    vAltCnturladdr varchar2(100) path 'URL/URLAddr',
    AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
    AltCntorgLST_NM varchar2(100) path 'Person/LastName',
    AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
    AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
    AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
    AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
    vAltCntdatarep varchar2(100) path '@DataRep'
    ) t
    LOOP
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName')
    INTO vAltCntFirstnamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFirstnamechkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName')
    INTO vAltCntLastNamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntLastNamechkflag:='Y';
    END;
    END LOOP;
    Here while parsing the data for contact2(with the request provided) by using the above procedure its going to exception.
    If the value is not there between the firstname then it should not go to the exception.
    If the firstname tag is not there it should go to the exception.
    But in the above procedure for the altcntfirstname and altcntlastname selectstatements its going to the exception part when there is no value for firstname(<FirstName></FirstName>).
    Is there any way to resolve this issue?
    Regards,
    Jyothirmai

    Hi Odie,
    In the request more than one alternate contact used to come(that means contact1 is primary contact,contact2 is alternate contact1,contact3 is alternate contact2 etc).
    We are retrieving the RelatedObjectID and named as ROID in the for loop.
    That means in the for loop we are getting the RelatedObjectID,if that RelatedObjectID is equal to party id then that firstname we are checking by using the below select statement.
    suppose when we used as like below in the loop the same RelatedObjectID(contact2) is repeating every time.
    FOR b IN (
    SELECT t.vAltCntcity vAltCntcity,
    t.Partysyskey Partysyskey,
    t.vAltCntZip vAltCntZip,
    t.vAltCntGovtID vAltCntGovtID,
    t.vAltCntTelno vAltCntTelno,
    t.vAltCntemailaddr vAltCntemailaddr,
    t.vAltCntstats vAltCntstats,
    t.vAltCntAdd1 vAltCntAdd1,
    t.vAltCntAdd2 vAltCntAdd2,
    t.vAltCntAdd3 vAltCntAdd3,
    t.AltCntstate AltCntstate,
    t.AltCntcntry AltCntcntry,
    t.vAltCntBRTH_DT vAltCntBRTH_DT,
    t.vAltCntGender vAltCntGender,
    t.vAltCntFaxno vAltCntFaxno,
    t.vAltCnturladdr vAltCnturladdr,
    t.AltCntorgFST_NM AltCntorgFST_NM,
    t.AltCntorgLST_NM AltCntorgLST_NM,
    t.AltCntorgMID_NM AltCntorgMID_NM,
    t.AltCntorgPFX_NM AltCntorgPFX_NM,
    t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
    t.AltCntpartytypecode AltCntpartytypecode,
    t.vAltCntdatarep vAltCntdatarep,
    t1.vAltCntInterestPercent vAltCntInterestPercent,
    t1.ROID ROID
    FROM (
    SELECT xData doc FROM dual ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
    COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
    , ROID varchar2(50) path '@RelatedObjectID'
    , vAltCntInterestpercent varchar2(100) path 'InterestPercent'
    )t1,
    XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
    COLUMNS
    vAltCntcity VARCHAR2(20) path 'City',
    Partysyskey VARCHAR2(100) path 'PartySysKey',
    vAltCntZip VARCHAR2(20) path 'Address/Zip',
    vAltCntGovtID VARCHAR2(20) path 'GovtID',
    vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
    vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
    vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
    vAltCntAdd1 varchar2(1000) path 'Address/Line1',
    vAltCntAdd2 varchar2(1000) path 'Address/Line2',
    vAltCntAdd3 varchar2(1000) path 'Address/Line3',
    AltCntstate varchar2(100) path 'Address/AddressState',
    AltCntcntry varchar2(100) path 'Address/AddressCountry',
    vAltCntBRTH_DT date path 'Person/BirthDate',
    vAltCntGender char(1) path 'Person/Gender/@tc',
    vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
    vAltCnturladdr varchar2(100) path 'URL/URLAddr',
    AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
    AltCntorgLST_NM varchar2(100) path 'Person/LastName',
    AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
    AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
    AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
    AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
    vAltCntdatarep varchar2(100) path '@DataRep'
    ) t
    LOOP
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/@RelatedObjectID][PartyTypeCode/@tc=1]/Person/FirstName')
    INTO vAltCntFirstnamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/@RelatedObjectID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFirstnamechkflag:='Y';
    END;
    end loop;
    For this above code its not going to the exception.we are using this select statement to check whether that node existed or not.
    If that node exists and value is not there, that time we are updating the table with the null value by using the vAltCntFirstnamechkflag value as like below in our procedure.
    IF b.AltCntorgFST_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||b.AltCntorgFST_NM||''''||',';
    ELSIF vAltCntFirstnamechkflag='N' AND vAltCntFirstnamechk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||NULL||''''||',';
    END IF;
    Please find the below procedure what we are using could you please let me know is there any possibility to resolve this issue(if the tag like <firstname></firstname> that
    time also it should not go to the exception).
    CREATE OR REPLACE PROCEDURE CHBM_QA1.PR_CUSTOMERUPDATE(PIN_XML_DATA IN CLOB,po_vResponse OUT clob )
    IS
    xData XMLTYPE:=NULL;
    vActivityCode VARCHAR2(100):=NULL;
    vSubActivityCode VARCHAR2(100):=NULL;
    ncode NUMBER(2):=NULL;
    nErrcode NUMBER(10):=0;
    vInfodesc VARCHAR2(1000):=NULL;
    vStatusinfo VARCHAR2(1000):=NULL;
    vStatus VARCHAR2(100):=NULL;
    vOrgid VARCHAR2(100):=NULL;
    vcity VARCHAR2(100):=NULL;
    vAltCntcity VARCHAR2(20):=NULL;
    vorgcity VARCHAR2(100):=NULL;
    vAddressState VARCHAR2(100):=NULL;
    vZip VARCHAR2(100):=NULL;
    vAltCntZip VARCHAR2(100):=NULL;
    vorgZip VARCHAR2(100):=NULL;
    vGovtID VARCHAR2(100):=NULL;
    vAltCntGovtID VARCHAR2(100):=NULL;
    vorgGovtID VARCHAR2(100):=NULL;
    vFullname VARCHAR2(200):=NULL;
    norgid NUMBER:=0;
    vTelno VARCHAR2(100):=Null;
    vAltCntTelno VARCHAR2(100):=Null;
    vOrgTelno VARCHAR2(100):=null;
    nOrgcnt NUMBER:=0;
    vemailaddr VARCHAR2(200):=null;
    vAltCntemailaddr VARCHAR2(200):=null;
    vorgemailaddr VARCHAR2(200):=null;
    vFISC_YEAR_END_DT VARCHAR2(100);
    vFiscalYearEndMoDaychkflag CHAR(1):='N';
    vFiscalYearEndMoDaychk VARCHAR2(100):=NULL;
    vGovtIDchkflag CHAR(1):='N';
    vGovtIDchk VARCHAR2(100):=NULL;
    vEMailAddresschkflag CHAR(1):='N';
    vEMailAddresschk VARCHAR2(1000):=NULL;
    vDialNumberchkflag CHAR(1):='N';
    vAltCntDialNumberchkflag CHAR(1):='N';
    vDialNumberchk VARCHAR2(100):=NULL;
    vAltCntDialNumberchk VARCHAR2(100):=NULL;
    vFaxnochkflag CHAR(1):='N';
    vAltCntFaxnochkflag CHAR(1):='N';
    vFaxnochk VARCHAR2(100):=NULL;
    vAltCntFaxnochk VARCHAR2(100):=NULL;
    vEMailAddressPchkflag CHAR(1):=NULL;
    vAltCntEMailAddressPchkflag CHAR(1):=NULL;
    vEMailAddressPchk VARCHAR2(200):=NULL;
    vAltCntEMailAddressPchk VARCHAR2(200):=NULL;
    vLastNamechkflag CHAR(1):='N';
    vAltCntLastNamechkflag CHAR(1):='N';
    vFirstNamechkflag CHAR(1):='N';
    vAltCntFirstNamechkflag CHAR(1):='N';
    vTaxidPchkflag CHAR(1):='N';
    vAltCntTaxidPchkflag CHAR(1):='N';
    vBusinessDescchkflag CHAR(1):='N';
    vBusinessDescchk VARCHAR2(2000):=NUll;
    vTaxidPchk VARCHAR2(200):=NULL;
    vAltCntTaxidPchk VARCHAR2(200):=NULL;
    vLastNamechk VARCHAR2(2000):=NULL;
    vAltCntLastNamechk VARCHAR2(2000):=NULL;
    vFirstNamechk VARCHAR2(2000):=NULL;
    vAltCntFirstnamechk VARCHAR2(2000):=NULL;
    vattdate VARCHAR2(50):=NULL;
    dattdate DATE;
    vAdd3Pchkflag CHAR(1):='N';
    vAltCntAdd3Pchkflag CHAR(1):='N';
    vOrgAdd3chkflag CHAR(1):='N';
    vOrgAdd2chkflag CHAR(1):='N';
    vAdd2Pchkflag CHAR(1):='N';
    vAltCntAdd2Pchkflag CHAR(1):='N';
    vOrgAdd3chk VARCHAR2(2000):=NULL;
    vOrgAdd2chk VARCHAR2(2000):=NULL;
    vAdd2Pchk VARCHAR2(2000):=NULL;
    vAltCntAdd2Pchk VARCHAR2(2000):=NULL;
    vAdd3Pchk VARCHAR2(2000):=NULL;
    vAltCntAdd3Pchk VARCHAR2(2000):=NULL;
    nADDR_ID NUMBER:=0;
    cntry VARCHAR2(100):=NULL;
    AltCntcntry VARCHAR2(100):=NULL;
    orgcntry VARCHAR2(100):=NULL;
    vAdd1 VARCHAR2(1000):=NULL;
    vAdd2 VARCHAR2(1000):=NULL;
    vAdd3 VARCHAR2(1000):=NULL;
    vAltCntAdd1 VARCHAR2(1000):=NULL;
    vAltCntAdd2 VARCHAR2(1000):=NULL;
    vAltCntAdd3 VARCHAR2(1000):=NULL;
    vorgAdd1 VARCHAR2(1000):=NULL;
    vorgAdd2 VARCHAR2(1000):=NULL;
    vorgAdd3 VARCHAR2(1000):=NULL;
    state VARCHAR2(100):=NULL;
    AltCntstate VARCHAR2(100):=NULL;
    nptycnt NUMBER:=0;
    orgstate VARCHAR2(100):=NULL;
    vstats VARCHAR2(100):=NULL;
    vAltCntstats VARCHAR2(100):=NULL;
    norgvalue NUMBER:=0;
    nPtyrolCon NUMBER:=0;
    npsnid NUMBER:=0;
    npsn NUMBER:=0;
    dFISC_YEAR_END_DT date:=NULL;
    Gender char(1):=NULL;
    vAltCntGender char(1):=NULL;
    vBRTH_DT VARCHAR2(100):=NULL;
    vAltCntBRTH_DT VARCHAR2(100):=NULL;
    BusinessDesc VARCHAR2(200):=NULL;
    dBRTH_DT date:=NULL;
    dAltCntBRTH_DT date:=NULL;
    prmycnt VARCHAR2(100):=NULL;
    vpsnstats VARCHAR2(100):=NULL;
    vAltCntpsnstats VARCHAR2(100):=NULL;
    vPartySysKey VARCHAR2(100):=NULL;
    vFaxno VARCHAR2(100):=NULL;
    vAltCntFaxno VARCHAR2(100):=NULL;
    vorgFaxno VARCHAR2(100):=NULL;
    nRlplptyid CHBM_PARTY_RELATIONSHIP.ROLE_PLAYR_PRTY_ID%TYPE:=NULL;
    vurladdr VARCHAR2(100):=NULL;
    vAltCnturladdr VARCHAR2(100):=NULL;
    FST_NM VARCHAR2(100):=NULL;
    orgFST_NM VARCHAR2(100):=NULL;
    AltCntorgFST_NM VARCHAR2(100):=NULL;
    LST_NM VARCHAR2(100):=NULL;
    orgLST_NM VARCHAR2(100):=NULL;
    AltCntorgLST_NM VARCHAR2(100):=NULL;
    MID_NM VARCHAR2(100):=NULL;
    orgMID_NM VARCHAR2(100):=NULL;
    AltCntorgMID_NM VARCHAR2(100):=NULL;
    PFX_NM VARCHAR2(100):=NULL;
    orgPFX_NM VARCHAR2(100):=NULL;
    AltCntorgPFX_NM VARCHAR2(100):=NULL;
    SUFX_NM VARCHAR2(100):=NULL;
    orgSUFX_NM VARCHAR2(100):=NULL;
    AltCntorgSUFX_NM VARCHAR2(100):=NULL;
    naddcnt NUMBER:=0;
    nAltaddcnt NUMBER:=0;
    norgseq NUMBER:=NULL;
    nADDR_IDseq NUMBER:=NULL;
    npsnidseq NUMBER:=NULL;
    nAltCntpsnidseq NUMBER:=NULL;
    vTransrefguid VARCHAR2(1000):=NULL;
    nRecfound NUMBER:=0;
    partytypecode varchar2(100):=null;
    AltCntpartytypecode varchar2(100):=null;
    RelationRoleCode VARCHAR2(100):=NULL;
    cUpdateflag CHAR(1):='N';
    vupdatequery CLOB:=null;
    plancode varchar2(100):=null;
    usercreated VARCHAR2(200):=null;
    openeddate VARCHAR2(100);
    openedtime varchar2(100);
    vopeneddate VARCHAR2(100);
    dopeneddate date;
    naddrcnt NUMBER:=0;
    ncnt1 number:=0;
    ncnt2 number:=0;
    ncnt3 number:=0;
    ncnt4 number:=0;
    ncnt5 number:=0;
    ncnt6 number:=0;
    nDelCnt1 number:=0;
    nDelCnt2 number:=0;
    nDelCnt3 number:=0;
    nAltcnt4 number:=0;
    nAltcnt5 number:=0;
    nAltcnt6 number:=0;
    nRelcnt NUMBER:=0;
    nAltRelcnt NUMBER:=0;
    ncnt7 NUMBER:=0;
    nprscnt NUMBER:=0;
    nAltprscnt NUMBER:=0;
    nPlncnt NUMBER:=0;
    npsncnt NUMBER:=0;
    vaddupdatequery VARCHAR2(4000);
    caddUpdateflag CHAR(1):='N';
    vaddrupdatequery VARCHAR2(4000);
    vAltCntaddrupdatequery VARCHAR2(4000);
    caddrUpdateflag CHAR(1):='N';
    cAltCntaddrUpdateflag CHAR(1):='N';
    vpsnupdatequery VARCHAR2(4000);
    vAltCntpsnupdatequery VARCHAR2(4000);
    cpsnUpdateflag CHAR(1):='N';
    cAltCntpsnUpdateflag CHAR(1):='N';
    vCntInterestPercent VARCHAR2(200);
    vAltCntInterestPercent VARCHAR2(200);
    vCntdatarep varchar2(100);
    vAltCntdatarep varchar2(100);
    vAltcnt XMLTYPE:=NULL;
    eParsererror EXCEPTION;
    PRAGMA EXCEPTION_INIT(eParsererror,-31011);
    eUniqueexception EXCEPTION;
    PRAGMA EXCEPTION_INIT(eUniqueexception,-00001);
    eplanexception EXCEPTION;
    PRAGMA EXCEPTION_INIT(eplanexception,-02291);
    eEventexception EXCEPTION;
    PRAGMA EXCEPTION_INIT(eEventexception,-01400);
    BEGIN
    BEGIN
    xData := XMLTYPE.createxml(PIN_XML_DATA);
    END;
    BEGIN
    SELECT extractvalue(value(t),'/TXLifeRequest/TransRefGUID')
    INTO vTransrefguid
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest'))) t
    WHERE existsnode(value(t),'/TXLifeRequest/TransRefGUID')=1
    AND extractvalue(value(t),'/TXLifeRequest/TransRefGUID') IS NOT NULL;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    ncode:=5;
    nErrcode:=200;
    vStatus:='FAILURE';
    vStatusinfo:='General Data Error';
    Raise_application_error(-20201,'Transrefguid does not exist');
    END;
    BEGIN
    SELECT t.vActivityCode,
    t.vSubActivityCode
    INTO vActivityCode,
    vSubActivityCode
    FROM (
    SELECT xData doc
    FROM dual
    ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE' passing doc
    COLUMNS
    vActivityCode VARCHAR2(20) path 'Activity/ActivityCode',
    vSubActivityCode VARCHAR2(20) path 'Activity/OLifEExtension/ActivityExtension/SubActivityCode'
    ) t;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    ncode:=5;
    nErrcode:=200;
    vStatus:='FAILURE';
    vStatusinfo:='RESULTINFO_DATA ';
    Raise_application_error(-20201,'General Data Error');
    END;
    IF vActivityCode='CHBM10003' AND vSubActivityCode='CHBM20002' THEN
    FOR b IN (
    SELECT t.vAltCntcity vAltCntcity,
    t.Partysyskey Partysyskey,
    t.vAltCntZip vAltCntZip,
    t.vAltCntGovtID vAltCntGovtID,
    t.vAltCntTelno vAltCntTelno,
    t.vAltCntemailaddr vAltCntemailaddr,
    t.vAltCntstats vAltCntstats,
    t.vAltCntAdd1 vAltCntAdd1,
    t.vAltCntAdd2 vAltCntAdd2,
    t.vAltCntAdd3 vAltCntAdd3,
    t.AltCntstate AltCntstate,
    t.AltCntcntry AltCntcntry,
    t.vAltCntBRTH_DT vAltCntBRTH_DT,
    t.vAltCntGender vAltCntGender,
    t.vAltCntFaxno vAltCntFaxno,
    t.vAltCnturladdr vAltCnturladdr,
    t.AltCntorgFST_NM AltCntorgFST_NM,
    t.AltCntorgLST_NM AltCntorgLST_NM,
    t.AltCntorgMID_NM AltCntorgMID_NM,
    t.AltCntorgPFX_NM AltCntorgPFX_NM,
    t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
    t.AltCntpartytypecode AltCntpartytypecode,
    t.vAltCntdatarep vAltCntdatarep,
    t1.vAltCntInterestPercent vAltCntInterestPercent,
    t1.ROID ROID
    FROM (
    SELECT xData doc FROM dual ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
    COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
    , ROID varchar2(50) path '@RelatedObjectID'
    , vAltCntInterestpercent varchar2(100) path 'InterestPercent'
    )t1,
    XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
    COLUMNS
    vAltCntcity VARCHAR2(20) path 'City',
    Partysyskey VARCHAR2(100) path 'PartySysKey',
    vAltCntZip VARCHAR2(20) path 'Address/Zip',
    vAltCntGovtID VARCHAR2(20) path 'GovtID',
    vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
    vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
    vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
    vAltCntAdd1 varchar2(1000) path 'Address/Line1',
    vAltCntAdd2 varchar2(1000) path 'Address/Line2',
    vAltCntAdd3 varchar2(1000) path 'Address/Line3',
    AltCntstate varchar2(100) path 'Address/AddressState',
    AltCntcntry varchar2(100) path 'Address/AddressCountry',
    vAltCntBRTH_DT date path 'Person/BirthDate',
    vAltCntGender char(1) path 'Person/Gender/@tc',
    vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
    vAltCnturladdr varchar2(100) path 'URL/URLAddr',
    AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
    AltCntorgLST_NM varchar2(100) path 'Person/LastName',
    AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
    AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
    AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
    AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
    vAltCntdatarep varchar2(100) path '@DataRep'
    ) t
    LOOP
    IF b.vAltCntBRTH_DT IS NOT NULL THEN
    dAltCntBRTH_DT:=to_date(b.vAltCntBRTH_DT,'yyyy-mm-dd');
    END IF;
    IF b.vAltCntdatarep != 'Removed' OR b.vAltCntdatarep IS NULL THEN
    BEGIN
    --------------Starting of CHBM_PERSON Table---------
    IF b.vAltCntstats IS NOT NULL THEN
    BEGIN
    SELECT code_val_cd
    INTO vAltCntpsnstats
    FROM chbm_code_reference
    WHERE tbl_nm='CHBM_PERSON'
    AND col_nm='STAT_CD'
    AND acord_cd =b.vAltCntstats;
    EXCEPTION
    WHEN OTHERS THEN
    ncode :=5;
    nErrcode :=2001;
    vStatus :='FAILURE';
    vStatusinfo :='RESULTINFO_DATA ';
    vInfodesc :='Person status details are not available in code reference';
    Raise_application_error(-20201,'Person status details are not available in code reference');
    END;
    END IF;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=2]/DialNumber')
    INTO vAltCntDialNumberchk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=2]/DialNumber') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntDialNumberchkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=19]/DialNumber')
    INTO vAltCntFaxnochk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=19]/DialNumber') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFaxnochkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName')
    INTO vAltCntFirstnamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFirstnamechkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName')
    INTO vAltCntLastNamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntLastNamechkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/EMailAddress/AddrLine')
    INTO vAltCntEMailAddressPchk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/EMailAddress/AddrLine') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntEMailAddressPchkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/GovtID')
    INTO vAltCntTaxidPchk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/GovtID') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntTaxidPchkflag:='Y';
    END;
    IF b.Partysyskey IS NOT NULL THEN
    nAltCntpsnidseq:=b.Partysyskey;
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||'UPDATE CHBM_PERSON SET';
    IF dAltCntBRTH_DT IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' brth_dt ='''||dAltCntBRTH_DT||''''||',';
    END IF;
    IF b.vAltCntGender IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' GEND_CD ='''||b.vAltCntGender||''''||',';
    END IF;
    IF b.vAltCntGovtID IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TAX_ID ='''||b.vAltCntGovtID||''''||',';
    ELSIF vAltCntTaxidPchkflag='N' AND vAltCntTaxidPchk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TAX_ID ='''||NULL||''''||',';
    END IF;
    IF b.vAltCntTelno IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TEL_NO ='''||b.vAltCntTelno||''''||',';
    ELSIF vAltCntDialNumberchkflag='N' AND vAltCntDialNumberchk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TEL_NO ='''||NULL||''''||',';
    END IF;
    IF b.vAltCntemailaddr IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' EMAIL_ADR ='''||b.vAltCntemailaddr||''''||',';
    ELSIF vAltCntEMailAddressPchkflag='N' AND vAltCntEMailAddressPchk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' EMAIL_ADR ='''||NULL||''''||',';
    END IF;
    IF b.vAltCntFaxno IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FAX_NO ='''||b.vAltCntFaxno||''''||',';
    ELSIF vAltCntFaxnochkflag='N' AND vAltCntFaxnochk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FAX_NO ='''||NULL||''''||',';
    END IF;
    IF vAltCntpsnstats IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' STAT_CD ='''||vAltCntpsnstats||''''||',';
    END IF;
    IF b.AltCntorgLST_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_NM ='''||b.AltCntorgLST_NM||''''||',';
    ELSIF vAltCntLastNamechkflag='N' AND vAltCntLastNamechk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_NM ='''||NULL||''''||',';
    END IF;
    IF b.AltCntorgFST_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||b.AltCntorgFST_NM||''''||',';
    ELSIF vAltCntFirstnamechkflag='N' AND vAltCntFirstnamechk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||NULL||''''||',';
    END IF;
    IF b.AltCntorgMID_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' MID_NM ='''||b.AltCntorgMID_NM||''''||',';
    END IF;
    IF b.AltCntorgPFX_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' PFX_NM ='''||b.AltCntorgPFX_NM||''''||',';
    END IF;
    IF b.AltCntorgSUFX_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' SUFX_NM ='''||b.AltCntorgSUFX_NM||''''||',';
    END IF;
    IF b.vAltCnturladdr IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' WEB_SITE_ID ='''||b.vAltCnturladdr||''''||',';
    END IF;
    IF dopeneddate IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_UPDT_DT ='''||dopeneddate||''''||',';
    END IF;
    IF usercreated IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_UPDT_BY_USER_ID ='''||usercreated||''''||',';
    END IF;
    vAltCntpsnupdatequery := SUBSTR(vAltCntpsnupdatequery,1,instr(vAltCntpsnupdatequery,',',-1,1)-1);
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' WHERE psn_id='''||nAltCntpsnidseq||'''';
    IF cAltCntpsnUpdateflag='Y' THEN
    EXECUTE IMMEDIATE vAltCntpsnupdatequery;
    vAltCntpsnupdatequery := NULL;
    nAltcnt4:=Sql%rowcount;
    END IF;
    END IF;
    END LOOP;
    END IF;
    END;
    Regards,
    Jyothirmai

  • XML Parsing issue with same tag names at multiple levels.

    My XML has the same tag name , ID at different levels in the XML.
    <InventorySearch>
    <*ID*>ID1</*ID*>
    <interactionDate>2012-09-01T10:30:00Z</interactionDate>
    <DescribedBy>
    <value>Cycle Count extract</value>
    <Characteristic>
    <*ID*>ID2</*ID*>
    </Characteristic>
    </DescribedBy>
    <type>Cycle Count</type>
    <InventorySearchComprisedOf>
    <*ID*>ID3</*ID*>
    <quantity>
    <amount>1</amount>
    <units>EACH</units>
    </quantity>
    <itemDateComplete>2012-09-07T10:30:00Z</itemDateComplete>
    <itemStatus>Open</itemStatus>
    </InventorySearchComprisedOf>
    </InventorySearch>
    When I use the Extract function with XML Sequence, I am getting all the ID values concatenated.
    select extract(value(d),'//ID/text()').getstringval() as id1,
    extract(value(e),'//ID/text()'). getstringval() as id2
    from xxnbn_cc_response_xml_stg x,
    table(xmlsequence(extract(x.xml_column,'/InventorySearch'))) d,
    table(XMLSEQUENCE(extract(D.column_value,'//InventorySearchComprisedOf')))(+) E;
    Return values :
    ID1 - ID1ID2ID3
    ID2 - ID3
    Is this the right way to parse this type of XML?

    The answer would depend upon your version of Oracle
    select * from v$version
    and the desired result set you want to see.
    If you are 10.2 or later, than XMLTable would be easier to write, but I won't go that way until we know more about what you want to see.

  • OES Client causes XML Parser Issue with Spring 3 Framework WAR

    Dear All,
    OES Client has been installed in the linux OS and configured JAVA SM in it. Have executed the sample webpage in the tomcat server which contains the 'PepResponse' of getting the authorization value (TRUE / FALSE) and it works fine.
    Code snippet:-
    PepResponse result = PepRequestFactoryImpl.getPepRequestFactory().newPepRequest(user, action, resourceString, null).decide();
    out.println("Result: "+ result.allowed());
    It returns the proper value if I mention the oes-client.jar classpath reference in the tomcat classpath settings, but at the same time the existing spring framework WAR file is not deployed in the tomcat. The same WAR file is deploying properly if I remove the classpath reference of oes-client.jar from the tomcat configuration.
    The issue causes because of xmlparser2.jar(oracle.xdk11.1.1.1) in the oes client.
    Have tried all the alternate approaches and failed to execute both the code together.
    Note:- One of the approach, I have tried to copy xcersImpl.jar and xml-apis.jar in the WEB-INF/lib within the war file and also executed oes authorization sample web page simultaneously with referred oes-client.jar classpath reference. The WAR file is started deploy properly and OES Authorization sample webpage has thrown 'Null Pointer Exception'.
    Anyone, please suggest how to resolve the JAR conflict issue between the OES Client and Spring Framework WAR.

    Hi, I got registered to this bea forms, can you help on where to go for posting new blog.
    Weblogic Consultant

  • Jdeveloper 12c  bpm 12c why the task-flow-registry.xml causes issues when recompiling?

    when i run a new build I receive the following when it used to work well any ideas?
    classes/META-INF/task-flow-registry.xml'
    [2:43:55 AM] Compilation complete: 4 errors, 0 warnings.
    [2:43:55 AM] Compilation complete: 4 errors, 0 warnings.
    Feb 16, 2015 2:43:55 AM oracle.tip.tools.ide.utils.LogUtil logStackTrace
    SEVERE: oracle.jdeveloper.deploy.DeployException: Build failed.
      at oracle.jdeveloper.deploy.common.BuildDeployer.build(BuildDeployer.java:348)
      at oracle.jdeveloper.deploy.common.BuildDeployer.buildAll(BuildDeployer.java:277)
      at oracle.jdeveloper.deploy.common.BuildDeployer.compileDependants(BuildDeployer.java:137)
      at oracle.jdeveloper.deploy.common.BuildDeployer.deployImpl(BuildDeployer.java:100)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.SequenceDeployer.deployImpl(SequenceDeployer.java:60)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:95)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.SequenceDeployer.deployImpl(SequenceDeployer.java:60)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.SequenceDeployer.deployImpl(SequenceDeployer.java:60)
      at oracle.jdevimpl.deploy.fwk.TopLevelDeployer.deployImpl(TopLevelDeployer.java:54)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.DeploymentManager.deployImpl(DeploymentManager.java:410)
      at oracle.jdevimpl.deploy.fwk.DeploymentManager.deploy(DeploymentManager.java:371)
      at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:310)
      at oracle.tip.tools.ide.fabric.deploy.workflow.TaskflowPackager.deployImpl(TaskflowPackager.java:107)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:95)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.SequenceDeployer.deployImpl(SequenceDeployer.java:60)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.SequenceDeployer.deployImpl(SequenceDeployer.java:60)
      at oracle.jdevimpl.deploy.fwk.TopLevelDeployer.deployImpl(TopLevelDeployer.java:54)
      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:152)
      at oracle.jdeveloper.deploy.common.AbstractStatefulDeployer.deploy(AbstractStatefulDeployer.java:130)
      at oracle.jdevimpl.deploy.fwk.DeploymentManager.deployImpl(DeploymentManager.java:410)
      at oracle.jdevimpl.deploy.fwk.DeploymentManager.deploy(DeploymentManager.java:371)
      at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:310)
      at oracle.jdeveloper.deploy.cmd.DeployCommand.deploy(DeployCommand.java:399)
      at oracle.jdeveloper.deploy.cmd.DeployCommand$DeploymentProgressShellAdapter$1.deploy(DeployCommand.java:529)
      at oracle.jdevimpl.deploy.fwk.RunnableImpl.deploy(RunnableImpl.java:337)
      at oracle.jdevimpl.deploy.fwk.RunnableImpl.run(RunnableImpl.java:394)
      at java.lang.Thread.run(Thread.java:745)

    That is the problem actually. When I run the link directly it works fine. But I need to launch the ADF application from a non-ADF app which is not hosted on WLS.
    The scenario above was just to simplify the problem...
    Is there any security settings etc that may cause this ?
    Thanks

Maybe you are looking for