XML URL Links - Issue diff to pervious post!
Please can someone help. I'm new to xml and flash and have worked through the following tutorial: http://www.kirupa.com/developer/actionscript/xmldataflash2.htm
I now want to add a link so for example I want <name>Thomas Edison</name> the name to be the link how do I do this. I've looked at links which give solutions like <name><a href="item/01.html"> Thomas Edison </a></name> but none of this has worked.
I'm using MX pro 04. Thanks
erm, this is an AS3 forum, and I don't think MX 04 supports that...
Similar Messages
-
Hi
I am trying to create a link in my project to one of our
company intranet pages. I am using a click box and the URL - it
works fine in the Preview from Slide or next 5 slides, but when I
Preview in Web Browser it doesn't connect. Any suggestions as to
what might be the cause?
Thanks
AlexHi Alex
Hmmm, before investigating too deeply, I'm seeing some
familiarity here. For starters, the first link is to a .PDF. It's
been my experience that links to .PDF and Word .DOC files is "iffy"
at best. If you truly copied and pasted the links, I'd first try
removing the %20 from that first link. That's something the browser
normally inserts for a space. So instead of:
http://wlgweb/Corporat/HumanResources/Staff%20Conduct/EmailInternetUsagePolicy.pdf
Change it to read:
http://wlgweb/Corporat/HumanResources/Staff
Conduct/EmailInternetUsagePolicy.pdf
This may help and it may just be twisting in the wind. But
I'd try that first. I've often seen linking issues arise from that
silly %20. If possible, try to avoid that. I'm guessing here that
it may not be possible to control in your case as someone else may
be in control of those names. I've personally always opted to
either use a mix of upper/lower case names ( StaffConduct ) or
substitution of an underscore where spaces would normally occur (
Staff_Conduct ).
Other wierdness I've seen when linking to .PDF content:
* I personally had a different PDF reader (Foxit) installed
as my default. When Foxit was my default reader, PDF links refused
to open.
* I think this one is IE specific, but I've also seen it
where if I have a .PDF in the same folder and open that way, even
though the address is totally correct, the first time through, the
link fails. With the totally correct address showing in the address
bar. I simply refresh the page and bingo, the PDF shows! Go figure.
I really don't believe that this one is related to Captivate and
the way it calls the links. My gut tells me it's an IE thing. But I
have nothing to back me up on this.
I'm not sure what to say or suggest for the second link. I
tested it myself and it doesn't work, which tells me that either
the link is simply incorrect, or possibly it's located on an
intranet site.
Sincerely... Rick -
Hi guys,
i created a news item in xml forms builder.
In the Renderlistitem page i had used a external link in the hyperlink property.
The link is working good but when i try to open the link it is opening in the same page.
is there any way so that i could open the link in the new page.
Thanks in advance
Regards,
Vijay.Hi Guys
i created a news item. it has only two forms ( Edit -- To enter data and Renderlist Form --- to display in the home page )
structure of renderlist form is something like this
name : xyz
status : xyz
website : www.xyz.com.
for website i had created external link in the hyperlink property of renderlist form to connect to our intranet site.
the link works good.
i could able to get what i wanted.
but when user click this link website is opening in the same page of Home.
i want that to open in the new page.
guys this is very urgent requirement
helpful answer will be rewarded
reg
vijay.
Edited by: vijayakumar kanniah mohan on Apr 24, 2008 6:54 PM -
How to add URL links in XML file?
Hi,
I'm having problem with adding the URL links to the flash output. I'm using the XML file to call images and then the corrsponding links. Images are called correctly but when I try to add a link I'm not getting the links, but instead getting the HTML anchor tags as texts. I'm using the XML escape characters to escape the HTML tags but the results are not what I need.
I'm using the following code:
<thumbnail preview="large.jpg" thumb="thumb.jpg">
<title><![CDATA[Finance Services]]></title>
<discription><![CDATA[<a href="http://www.google.ca">Google</a>]]></discription>
</thumbnail>
Output:
Images are displayed correctly, but instead of getting the links, I'm getting following text message:
<a href="http://www.google.ca">Google</a>
I need to find out what I'm doing wrong. Am I using the correct way to add the links or not?
Thanks for your time.I'm using following code for the Description part, where I need to place the HTML tags:
var _discription:TextField = previewHolder.discriptionText.discriptionText;
_discription.htmlText = _xml.thumbnails.thumbnail[photoNum].discription.toString()
I'm using the htmlText, I tried replacing htmlText with tf.htmlText, but it didn't work. I'm importing the text field using import flash.text.TextField; do I need to import something for HTML tags to work? -
XML Forms and URL links in RenderListItem Form
Hello everyone,
I'm new at XML Forms and trying to do my first forms. I have this scenario:
- user fills several entry fields in "Edit" Form, 2 of them include URL Links.
- Every new entry in "RenderListItem" Form lists fields "Title" and URL1 URL2.
In RenderListItem Form, i would like to control the behaviour of these links. Link URL1 should open in a new window, but URL2 should stay in the same browser window.
How can i achieve this ?
Thank you in advance for any help,
NunoHi Nuno,
you can achieve this by changing the XSL file.
Check out this thread for more infos: XML form display in same browser window
Best regards,
Robert -
I have a datagrid populated with a XML file which contains
URL links. I cannot get the links to work when I click on them. Is
there a simple solution? I'v tried to use this format :
<link> <a href="
http://www.ghagdjagdjadg.com>
testpage</a></link> , but nothing happens and the line
in the datagris is empty. Can anyone help me?I dont suppose eith ero fyou can help me with a menu Im
building, I have worked through a few demonstrations my xml menu
looks like this.
<menu>
<menuitem label="Integration Files" icon="folder" >
<menuitem label= "JPI Word dot" icon="dot"/>
</menuitem>
</menu>
the problem I'm having is I have tried to add urls but to no
avail. Any help would be appreciated. -
URL links for Workflow Approval Email per user & others
Hi all, we have upgraded to SRM7 and understand that we have to switch to using program /SAPSRM/OFFLINEAPPROVALSEND to generate the workflow notification emails. We have maintained the portal information in the SRM configuration to build the link. However, we have 2 issues here
1. We currently output collective email so emails are sent out at specific timing on a per user rather than per work item basis. The URL link does not seem to work in this case (for shopping cart approval example) and we get an object GUID error. The URL looks something like this
http://sap-ped.dev.xyz.com/irj/portal/?navigationtarget=obn://BOSystemAlias=SAP_SRM/BOTechnicalName=sc/Operation=detailprof&NavMode=3
Also, even if I run the program for a PO approval example, the BOTechnicalName is still pointing to sc.
However, if I do it on a per work item basis, the URL works.
Does anyone know where the control this setting?
2. External and internal portal
We have some users connecting to the portal through more secured channel (external portal). In this case, I couldn't find a way to generate the appropriate URL for the external. In the past in the older SRM version, the program was using the attribute ITS_DEST in PPOPMA_BBP to build the URL link. Now, I do not know how the system knows which portal URL to take if the control is no longer at user level.
Has anyone ever had this requirement before?
My worse case scenario to resolve the above issues would be to use the BADI to alter the content of the email notification. The purpose of posting this message here is to ensure that I am not missing out any standard SAP functionality which could meet our requirements.
Cheers!
SFHello,
See hyper-links below:
[How-To: Offline approval - Logon link does not work|http://wiki.sdn.sap.com/wiki/display/SRM/Offlineapproval-Logonlinkdoesnot+work]
[KBA 1511180 - The hyperlink in the offline approval email is incorrect|https://service.sap.com/sap/support/notes/1511180]
Regards.
Laurent. -
How to display URL images and URL link (html) from Smartforms?
Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
lc_true(1) VALUE 'X',
lw_control_parameters TYPE ssfctrlop,
lw_output_options TYPE ssfcompop,
lc_graphics(8) VALUE 'GRAPHICS',
lw_xsfparam_line TYPE ssfxsfp,
lc_extract(7) VALUE 'EXTRACT',
lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
lc_mygraphics(11) VALUE 'mygraphics/',
lc_content_id(10) VALUE 'CONTENT-ID',
lc_enable(6) VALUE 'ENABLE',
lw_job_output_info TYPE ssfcrescl,
lw_html_data TYPE trfresult,
lw_graphics TYPE ssf_xsf_gr,
lt_graphics TYPE tsf_xsf_gr,
lv_html_xstr TYPE xstring,
lw_html_raw LIKE LINE OF lw_html_data-content,
lv_incode TYPE tcp00-cpcodepage VALUE '4110',
lv_html_str TYPE string,
lv_html_len TYPE i,
lc_utf8(5) VALUE 'utf-8',
lc_latin1(6) VALUE 'latin1',
lv_offset TYPE i,
lv_length TYPE i,
lv_diff TYPE i,
lt_soli TYPE soli_tab,
lw_soli TYPE soli,
lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
lv_name TYPE mime_text VALUE 'sapwebform.htm',
lv_xstr TYPE xstring,
lw_raw TYPE bapiconten,
lt_solix TYPE solix_tab,
lw_solix TYPE solix,
lv_filename TYPE string,
lv_content_id TYPE string,
lv_content_type TYPE w3conttype,
lv_obj_len TYPE so_obj_len,
lv_bmp TYPE so_fileext VALUE 'BMP',
lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
lc_doc_bcs TYPE REF TO cl_document_bcs,
lc_bcs TYPE REF TO cl_bcs,
lc_send_exception TYPE REF TO cx_root,
lw_adsmtp TYPE lty_adsmtp,
lv_mail_address TYPE ad_smtpadr,
lc_recipient TYPE REF TO if_recipient_bcs,
lc_send_request TYPE REF TO cl_bcs,
lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = v_form_name
IMPORTING
fm_name = v_namef
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = v_language
i_application = 'SAPDEFAULT'
IMPORTING
e_devtype = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
break mhusin.
ENDIF.
Set output options
lw_output_options-xsf = lc_true.
lw_output_options-xsfcmode = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
EXPORTING
control_parameters = lw_control_parameters
output_options = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
job_output_info = lw_job_output_info
TABLES
tt_tabh = tt_tabh
tt_tabb = tt_tabb
tt_tabf = tt_tabf
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
inbuff = lv_html_xstr
incode = lv_incode
csubst = lc_true
substc_space = lc_true
IMPORTING
outbuff = lv_html_str
outused = lv_html_len
EXCEPTIONS
OTHERS = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
EXPORTING
object_id = 'ZWN'
object_url = 'ZWN.GIF'
EXCEPTIONS
OTHERS = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
lv_diff = lv_html_len - lv_offset.
IF lv_diff > lv_length.
lw_soli-line = lv_html_str+lv_offset(lv_length).
ELSE.
lw_soli-line = lv_html_str+lv_offset(lv_diff).
ENDIF.
APPEND lw_soli TO lt_soli.
ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
EXPORTING
content = lt_soli
filename = lv_name
description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
CLEAR lv_xstr.
LOOP AT lw_graphics-content INTO lw_raw.
CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
ENDLOOP.
lv_xstr = lv_xstr(lw_graphics-length).
lv_offset = 0.
lv_length = 255.
CLEAR lt_solix[].
WHILE lv_offset < lw_graphics-length.
lv_diff = lw_graphics-length - lv_offset.
IF lv_diff > lv_length.
lw_solix-line = lv_xstr+lv_offset(lv_length).
ELSE.
lw_solix-line = lv_xstr+lv_offset(lv_diff).
ENDIF.
APPEND lw_solix TO lt_solix.
ADD lv_length TO lv_offset.
ENDWHILE.
CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
lv_content_type = lw_graphics-httptype.
lv_obj_len = lw_graphics-length.
*Add images to the email
CALL METHOD lc_mime_helper->add_binary_part
EXPORTING
content = lt_solix
filename = lv_filename
extension = lv_bmp
description = lv_description
content_type = lv_content_type
length = lv_obj_len
content_id = lv_content_id.
ENDLOOP.
TRY.
lv_subject = lv_subject.
lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
i_subject = lv_subject
i_multirel_service = lc_mime_helper ).
CATCH cx_document_bcs INTO lc_send_exception.
CATCH cx_bcom_mime INTO lc_send_exception.
CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
lc_bcs = cl_bcs=>create_persistent( ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
lc_bcs->set_document( i_document = lc_doc_bcs ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
lc_recipient = cl_cam_address_bcs=>create_internet_address(
i_address_string = lv_mail_address ).
CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
lc_bcs->add_recipient( i_recipient = lc_recipient ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
lc_bcs->send( ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM. "call_smartforms
End Code --->
Thanks and Regards.1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead -
URL link to open transaction in NWBC Desktop client
Hi!
I am trying to create an URL link to open a transaction in a role that I am using.
The webpage is shown in a web-chip as a part of FPM page inthe NWBC desktop client.
I have tried this type of concept: https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
The problem is that this opens the transaction in the HTML version of NWBC (inside NWBC desktop client).
However, I would do not want to use the HTML based version of the transaction. I want to use nativ abap transaction inside NWBC Desktop client.
I am able to open the transaction with a link from a webbrowser with this type of link:
sap-nwbc://https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
This link does not open at all from within NWBC....
How do I achieve opening a transaction via URL from inside the NWBC Desktop client?Hi Stefan,
Same issue i have as well.
My Understanding is, in NWBC desktop, if you open a non sap (eg: html) page, NWBC becomes an IE Browser.
That means you are now out of SAP for that tab (with html page) and whenever you try to launch any SAP transaction (using the method from HTML) it will launch in a new window and ask for Login.
May be Experts like Samuli Kaski & Melinda Ludanyi can put some light on it.
But, I have one more solution for this which is partially working in my case. May be helpful in you case as well.
Issue: From some SAP transaction in NWBC (say tab A), you are launching the html page (say tab B) and then want to launch another SAP transaction (Say tab C) from html.
Solution: Embed the HTML in SAP using HTML Viewer class and launch SAP custom transaction using the interface IF_LSAPI. It will launch it in new tab as a sap transaction with your html page.
Now if you want to launch the SAP transaction from your html page (Which is embedded in SAP custom transaction) you can use HTML Viewer class Events and you can pass parameters as well. Re use the same interface IF_LSAPI and launch it in new tab
In my case i am facing problems as the web developer has so many things on java script and they are not working properly. He is working on it and i am hoping it will be fine.
Regards,
Nik -
URL link in Reader won't open unless a browser is already open
I have an issue on a Windows 7 PC using IE8 and Adobe Reader 9.3. While viewing a PDF file in Reader, and clicking on a URL link in the PDF, nothing happens unless a browser window is already open. It doesn't matter if the browser is Firefox or IE8, although IE is the default browser. When no browser is running, nothing occurs, not even an error or Enhanced Security message. I've verified that the "Create links from URLS" is selected.
Any ideas?
Thanks In AdvancePossible workaround...
1. Create a local iPhoto Library - to do this open iPhoto while holding down the Option key. Give it a unique name and save it somewhere.
2. When you are not connected to your home network, open iPhoto with the Option key held down, and select your new local Library. Then open iMovie.
iPhoto remembers the last Library open, so as you move in and out of your home network you will need to change the iPhoto Library (following step 2 above) based on your location.
hope this helps,
-mike -
Extended Notifications: how to change the URL link
Hello,
We are on ECC6. We use Extended Notifications to alert users to the presence of new workitems, but when they click on the link to execute the workitem, they're presented with the login screen.
We have been able to send emails from workflow which contain a link that does not ask for a login so I know which URL to use. The problem is, how can you set the URL in Extended Notifications? How does it decide which URL to use? I've tried changing a few General Settings in SWNCONFIG, none of them made a difference.
Any hints, tips, suggestions would be appreciated.
regards
Rick Bakker
Hanabi TechnologyHi Rick,
I wrote my own notification handler to solved an link issue (wanted to point to a specific iView url). I changed the notification handler via Category and double clicking on the category:
Scenario WORKFLOW
Category ZCATEGORY
Description Adobe Administrator
Requested Reliability 0 Undefined
Collective Message A Grouping with Othe
Notification Priority 5 Medium
Delete After Send
Category Handler CL_SWN_CATEGORY
Notification Handler ZCL_SWN_NOTIF_WF
Handler for User CL_SWN_USER_STD
Have a look at some of the methods:
LOAD_INSTANCE_WA
ADD_LINKS_ACTION
ADD_LINK_ACTION_DISPLAY
ADD_LINK_ACTION_EXECUTE
ADD_LINK_ACTION_DECISION
CREATE_ACTION_ATTACHMENT
CREATE_INBOX_ATTACHMENT
Hope it helps you understand how the link is created. -
How to display the one BSP View page (not a start page)Through URL link..
Hi Sir/Madam,
I want to open one BSP view page through URL link...
Let me Explain clearly..
I have an Z application ZHRRCF_APPROVAL..In this application approve.bsp file i have added som more Fields..and Finally I am going to click ApproVe Buton /Reject Button.When i click the reject button the the items are rejected.Its working fine.....
My Requirement is :
1. I want to display the approval page directly when i click the URL link from mail box.--i am getting this .. No issues..(Got the URL link from function module)
2. After opening the approval page when i click URL link, when i click the reject button-- i am getting the error "The following Error Text was processed in the system GR2."Access via NULL object reference not possible"
3. How to proceed the this URL link without error .. the URL link is
https://abd00093.de.abb.com:8200/sap(bD1lbiZjPTIwMA==)/bc/bsp/sap/zhrrcf_approval/application.bsp?objid=50003421&otype=NB&plvar=01&requestdate=20090121&requestedRsnCode=01&requestedstatus=1&requester=USRECRUITER1&SAPWFCBURL=https%3a%2f%2fabd00093%2ede%2eabb%2ecom%3a0000000000008200%2fsap%2fbc%2fwebflow%2fwshandler%3f_sapwiid%3d000000018491%26_saptask%3dTS51807979%26_saplogsys%3dGR2CLNT200%26_sapuname%3dLINEMANAGER%26_saplangu%3dE%26sap-client%3d200
( I got this URL directly using my own function module.. In this function Module i was not getting the SAPGUID -- the error is because of that i am not sure..)How to get this sapguid dynamically..
Please guide me to proceed this req asap..
I am waiting for your reply ....Please
Thanks and Regards
Mohan,PPlease have BPEL loggers both at domain and system level to DEBUG mode. Set all loggers to DEBUG as you are interested to see the entire sequence flow..however, some loggers give you unnecessary info ;/ apart from cube, activation, delivery, dispatch, persistence.
Added to this, you might want to try SOAPUI, Fiddler, HTTP Analyzer. -
How to remove bullets and spacing for url links in the Related Links iview?
I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent -
SAP CRM 7.0 WEBUI erroring out while trying to open URL link
We have recently upgraded our CRM system from 6.0 to 7.0. I am currently facing an issue with CRM 7.0 WebUI where I am trying to click on the URL link attached to the activity. When I Click on any URL to open. The link does not open and we get a javascript:void(0) error on the screen.
This issue happens when I access WebUI from client network as well as outside network. I have tried with all browser (IE 8,9,10) to try to analyse the issue but the behavior is not common.
Browser
In
Network
Out
of Network
IE8
Does not work
Does not work
IE9
Works if you click on the link, go back to home screen, come back to
activity and click again.
Does not work
IE10
Works
Does not workArun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu -
Object Services Attachements for URL Links
Hi Guru,
I have to create interface for Object Services Attachments for URL links.
Scenario is
Drad Table:
DOKOB = PTRV_HEAD
DOKNR = 0000000000000001000000000098
objky = 0050000088\
Draw Table:
doknr = 0000000000000001000000000098
filep: rgenbust:/DCTM370097578000AD0C
Create object service url attachment with:
http://rdgvmws10:8080/WebAccess/TEServlet.ser?docbase=rgenbust&sapLinkId=
appended to FILEP after the /
to make a link of:
http://rdgvmws10:8080/WebAccess/TEServlet.ser?docbase=rgenbust&sapLinkId= DCTM370097578000AD0C
I unable solve this issue can any help with the source code.
I need to create program with scratch. Can any body tell me how to start the program. First which table i need to read. How to retrieve URL append to FILEP field. I would appreciate if any body help.
Thanks
AshrafHello,
See hyper-links below:
[How-To: Offline approval - Logon link does not work|http://wiki.sdn.sap.com/wiki/display/SRM/Offlineapproval-Logonlinkdoesnot+work]
[KBA 1511180 - The hyperlink in the offline approval email is incorrect|https://service.sap.com/sap/support/notes/1511180]
Regards.
Laurent.
Maybe you are looking for
-
How do i fix my ipod touch 4th gen. its a blank white screen?
i have recently downloaded IOS 5.0 and my ipod has been doing wat everyone else`s has lagging. But this morning i got on to facebook and trying refreshing the screen my ipod went screwy it has currently just showed a blank white screen and will not d
-
Connection between SAP R/3 and SAP XI with RFC
Hi Experts, I am beginner in SAP XI. We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C I am trying to validate a connection between SAP R/3 and SAP XI with RFC. I followed all the weblogs ,and i did exactly the same way, but I am unsucessful... Schema n
-
Multiple iTunes IDs, can we share downloaded content
Myself, -iPhone, iPad Wife - iPod, iPad Son - iPhone, iPad NAS and wifi infrastructure. We all have Windows PCs and have been buying/downloading content for some time under unique itunes accounts/emails. The goal is to be able to share what we purcha
-
Copy activity fails while copying/reading sql object return type
Hi, Please help me by providing some information for the following issue i am executing a db adapter in BPEL service ,i am calling a stored procedure it returns a object type . i can see the outputparameters retrun values in the audit(BPEL console) b
-
How to select hightest 10 values from array?
Hi there, say i got an array of double, how do i find the top ten highest values in the array? Thanks Arlef