XP SP3 SlipStream Issue

  Hello all, I hope someone can help or has tried this before because I am stumped.
  I have created a T60 XP SP3 Slipstreamed image that installs Windows and all the T60 drivers, it doesn't ask for any user input beyond select the partition.
  My problem is my Slipstreamed CD Key is coming up "Unauthorized product key" when I try to activate Windows. I used the same product key IBM/Lenovo uses on their Product Recovery Disk.
  I have several T60's and so I felt using the 'generic' for lack of a better work product key that IBM/Lenovo uses on most their T60's was the best option.
  As a sidenote, if during activation I change the product key to the one listed on the bottom of the machine, it activates fine, but I would rather use IBM/Lenovo's as then the end user isn't forced to make that change.
  I have several T60's so slipstreaming the key listed on the base of the machine is not really an option. Does anyone know why the product key used in the Product Recovery Disks is not working and how to fix this? 
Solved!
Go to Solution.

An easy way would be to take the Lenovo Restore disk and pull the files from it. Use nlite to start creating the slipstream. You can then add SP2-3 and the drivers as you said along with adding all the user info (so that you don't have to when installing) Now what I am guessing and sure you did is put the Key in the Key spot (so that you would not have too during install) The trick is to leave it blank. When you use the files from the Lenovo disk the VL is already there. Burn the disk and it will work without you needing to put in the Key. Atleast that worked for another XP Pro Corp Disk for some small office that has the same PC's.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community   Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

  • BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

    We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
    The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
    In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
    The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
    Any ideas?
    Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

    We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
    We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
    We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
    This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
    We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
    Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
    I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
    Thanks in advance for the advice.

  • Exchange Server 2010 SP3 Update Issues

    Hello,
    I have been having some issue upgrading Exchange 2010 (RTM v14.00.0639.021) to SP3. According to all documentation that I have read I should have no issues upgrading from an older RTM version. I am receiving the following error related to the AD Schema (2008
    R2, functional level of 2008): 
    [05/30/2014 13:38:20.0379] [0] Setup will run the task 'test-setuphealth'
    [05/30/2014 13:38:20.0394] [1] Setup launched task 'test-setuphealth -DomainController 'DC.domain.com' -DownloadConfigurationUpdates $true -ExchangeVersion '14.3.123.4' -Roles 'Global' -ScanType 'PrecheckInstall' -SetupRoles 'Global' -PrepareDomain $null -PrepareLegacyExchangePermissions
    $null -PrepareOrganization $true -PrepareSchema $true -CustomerFeedbackEnabled $false'  
    [05/30/2014 13:38:23.0733] [1] Active Directory session settings for 'test-SetupHealth' are: View Entire Forest: 'True', Configuration Domain Controller: 'DC.domain.com', Preferred Global Catalog: 'DC.domain.com', Preferred Domain Controllers: '{ DC.domain.com
    [05/30/2014 13:38:23.0811] [1] Beginning processing test-setuphealth -DomainController:'DC.domain.com' -DownloadConfigurationUpdates:'True' -ExchangeVersion:'14.3.123.4' -Roles:'Global' -ScanType:'PrecheckInstall' -SetupRoles:'Global' -PrepareDomain:$null -PrepareLegacyExchangePermissions:$null
    -PrepareOrganization:'True' -PrepareSchema:'True' -CustomerFeedbackEnabled:'False'
    [05/30/2014 13:38:30.0721] [1] Active Directory session settings for 'Get-OrganizationConfig' are: View Entire Forest: 'True', Configuration Domain Controller: 'DC.domain.com', Preferred Global Catalog: 'DC.domain.com', Preferred Domain Controllers: '{ DC.domain.com
    [05/30/2014 13:38:30.0721] [1] Beginning processing Get-OrganizationConfig
    [05/30/2014 13:38:30.0737] [1] Searching objects of type "OrganizationConfig" with filter "$null", scope "SubTree" under the root "$null".
    [05/30/2014 13:38:30.0909] [1] Previous operation run on domain controller 'DC.domain.com'.
    [05/30/2014 13:38:30.0909] [1] Preparing to output objects. The maximum size of the result set is "unlimited".
    [05/30/2014 13:38:31.0845] [1] Ending processing Get-OrganizationConfig
    [05/30/2014 13:38:38.0506] [1] [REQUIRED] The Active Directory Schema is not up-to-date, and this user account is not a member of the 'Schema Admins' and/or 'Enterprise Admins' group.
    [05/30/2014 13:38:38.0537] [1] [REQUIRED] Global updates need to be made to Active Directory, and this user account is not a member of the 'Enterprise Admins' group.
    [05/30/2014 13:38:38.0537] [1] [REQUIRED] A reboot from a previous installation is pending. Please restart the system and rerun setup.
    [05/30/2014 13:38:38.0568] [1] Ending processing test-setuphealth
    [05/30/2014 13:38:38.0568] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    [05/30/2014 13:38:38.0584] [0] End of Setup
    Things I have done are, verify user is a member of appropriate groups, rebooted servers, and ran commands from an elevated command prompt. Any thoughts would be appreciated.

    running from an elevated cmd prompt?
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Yes, still no joy.

  • Windows XP Home SP3 install issues

    I have Windows XP Home running on my Macbook Pro on a 40GB partition. I have about 16.5GB of free space on that partition. Whenever I try to install SP3 onto the system I receive "Cannot install SP3 because C:\windows\$SevicePackUninstall" needs an extra 4MB of space" error? I've tried to install through Windows Update and manually with a downloaded SP3 file.

    Sorry My english is epouvantable !!
    But the solution is :
    *Originally Posted by Microsoft Apple computers*
    This issue affects Windows XP Home Edition and Windows XP Professional operating systems running through Apple Boot Camp.
    If you attempt to install this release candidate on an Intel-based Apple computer (Mac Pro, Mac Mini, MacBook, MacBook Air, MacBook Pro, or iMac) that is running Windows XP SP2 through Boot Camp, installation may fail with the error "Out of disk space".
    To avoid this, manually create a necessary registry key as follows:
    To create the registry key
    1. Click Start, click Run, type regedit, and then click OK.
    2. Locate and then click the following registry subkey: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup
    3. On the Edit menu, point to New, and click String Value.
    4. In the text box under the Name column, type BootDir and press ENTER.
    5. Right-click the name BootDir, and then click Modify.
    6. In the Edit String Value dialog box, type the drive letter for your system drive, and then click OK. For example, if your system drive is C:, type C:\
    7. Close Registry Editor.
    After you have created this registry key (or if you created this key when you installed a previous version of this Service Pack), you can proceed with the installation.
    Message was edited by: Pirmil
    Message was edited by: Pirmil

  • AppV 5 SP3 - Outstanding Issues

    Hello all,
    I am curious to see if anyone else has tried the items that SP3 has listed as fixed.
    Our environment is Windows 8.1 x64, SCCM 2012.
    Remaining issues:
    RunVirtual key only works for Globally published applications.  Inserting a guid for a user published application fails to launch it with the native process. 
    Connection Group is working with both Global and User published applications, except when applying any one of those applications to the RunVirtual key; if an application within a Connection Group (global or user) is launched via RunVirtual, the connection
    Group is not loaded at all.

    Hello,
    RunVirtual within HKLM requires Global Publishing, however it can also be applied within the HKCU for the specific user. See this article;
    http://virtualvibes.co.uk/runvirtual-comes-to-the-user-in-appv-5-0-sp3/
    No idea what you mean here - I can't say that I am experiencing the same?
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • CS3 in XP SP3 printing issues

    I see that a few folks are having a couple of issues with SP3, mine is in regard to printing and actually doesn't show up until the file hits the Distiller.
    We use a method that makes the Distiller concatenate multiple PS files (in this case 1 InD page per PS file) in to a single PDF. Prior to SP3 we had no trouble with this, but now as each page gets added the Distiller works slower and slower, slowing by as much as 2 seconds from the page before.
    I've tried re-installing the printer driver we use but to no avail.
    Has anyone seen similar issues?
    Many thanks,
    Ken

    We are new to CS3. I am having trouble printing a collage I created in InDesign version 5.0.3. OS is WinXP version 2002 SP3. I have been unable to print it to an HP Business Inkjet 2800 and our Canon Color Copier Model C5870U. I have also printed it to Acrobat and it looks fine, but cannot get it to print on either printer from Acrobat, either. .indd file size is 17.4 MB and .pdf file is 4.82 MB. I've printed much larger files from PageMaker to both those printers when we were running Win2K.
    Has anyone gotten any answers to their printing problems, yet?

  • 2010 SP3 known issues?

    Hi, I'm under the pump to rush an Exchange 2010 SP3 upgrade of our Exchange 2010 SP1 DAG, just hoping to get some feedback and tips about good resources to read for the best procedure to do so, for any known issues requiring actions after upgrade
    etc.
    Do I upgrade the passive DAG member first or the active first?
    Any action required on the DAG witness?
    All servers are on Windows 2008 R2 SP1, active server is a physical box, passive is a Hyper-V VM and the witness is a physical box.
    Thanks.

    Hi Trana,
    I would like to clarify the following things to answer your questions.
    1. Before you apply the service pack to a DAG member, please move all active mailbox database copies off the server to be upgraded and configure the server to be blocked from activation. If the server to be upgraded currently holds the primary Active Manager
    role, move the role to another DAG member prior to performing the upgrade.
    2. Please stop any scheduled tasks or other processes running on the DAG member or within that DAG that could adversely affect the DAG member being upgraded or the upgrade process.
    What's more, here is an article for your reference.
    Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
    http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • AccAD 2.1 on SLES 10 SP3: Installation issue with compat-libstdc++

    Hi everybody,
    if someone likes to try the installation of AccAD 2.1 on SLES 10 SP3 (i386 or x86_64), be aware of the following:
    After installing the OS with the delivered autoinst.xml, not all libraries needed by AccAD are installed.
    If you try to install the AccAD Engine, you will get a message that the following package is missing:
        compat-libstdc++
    If you ignore this message, after the installation of AccAD it will not work. Especially MaxDB needs this package. You can see this in the installation protokoll that some MaxDB installation steps fail.
    Since SLES 10 SP3 this package "compat-libstdc++" is moved to the software packge
        libstdc+33 / libstdc+33-32bit
    For example on the original SLES 10 SP3 installation DVD, these are the packages
    libstdc+33-3.3.3-7.8.1 / libstdc+33-32bit-3.3.3-7.8.1
    Install these packages before the installation of AccAD an then install AccAD. Now you can ignore the message of the missing rpm-package "compat-libstdc++".
    Regards, Rossi
    Edited by: Stephan Roßmanith on Feb 18, 2010 9:49 AM

    Hi Stephan,
    Thank you very much for your notes.
    This issue has already been fixed in AccAD 2.2.
    Best regards,
    Yael

  • Post SP3 webi issues.

    I have recently, upgraded to BO XI R3.1 SP3 from R3.1. This installation was an additional upgrade to an existing product.
    I need to confirm if, the below mentioned features are available after SP3 upgrade or any FP or new SP is required?
    A. Webi - Query Stripping (I was trying to locate this feature but could not. Is it only available for OLAP database users? I went to Query/Document properties in Infoview/Rich Client to confirm on this feature).
    B. Webi - Graphs Auto scale of Y-Axis (excluding Pie Chart)?
    C. Webi - Controlling Auto-merge Dimensions?
    D. Webi u2013 Drilling on Merged Dimensions?
    E. Webi - Personal Data Provider refresh?
    F. Webi - SAP Solution Manager diagnostic tool?
    G. Webi - Ranking by dimension with the Where operator?
    H. HTML interpretation tag u201C<a></a>u201D is now supported?
    I. Webi u2013 Standard Windows Control?
    J. Webi - Query on Query?
    K. Webi - Fold and Unfold feature?
    L. Webi - Query Filter on QaaWS and LiveOffice?
    M. Webi - Customize WebI functions with Extension Points?
    Please help.

    Hi,
    In Webi top-right toolbar I can only see "Refresh Data, Purge Data, Track changes, Simple report filter, Drill, Snapshot and Webi help".
    Is there any admin setting that needs to be enabled for this feature?
    Having said so, this might look a bit frustrating but does that mean it is of no use to upgrade from R3.1 (base) to SP3 at all?
    I cannot take any benifit from the below mentioned features:
    A. Webi - Query Stripping
    - Only available to OLAP users/SAP Universes. Agreed.
    B. Webi - Graphs Auto scale of Y-Axis (excluding Pie Chart)?
    - Need to try this if it works.
    C. Webi - Controlling Auto-merge Dimensions?
    - In base R3.1, I can see in 'Document properties' anoption for Auto-merge dimensions. If this is the one then it already exists.
    D. Webi u2013 Drilling on Merged Dimensions?
    - If it exists, will need steps on how to do it please.
    E. Webi - Personal Data Provider refresh?
    - it already exists in base R3.1?
    F. Webi - SAP Solution Manager diagnostic tool?
    - Not applicable
    G. Webi - Ranking by dimension with the Where operator?
    - If it exists, will need steps on how to do it please.
    H. HTML interpretation tag u201Cu201D is now supported?
    - not too sure about it.
    I. Webi u2013 Standard Windows Control?
    - not available?
    J. Webi - Query on Query?
    - If it exists, will need steps on how to do it please.
    K. Webi - Fold and Unfold feature?
    - not available?
    L. Webi - Query Filter on QaaWS and LiveOffice?
    - not available?
    M. Webi - Customize WebI functions with Extension Points?
    - not available?

  • SP3 Installation Issues

    Hey all,
    I've been trying multiple times to upgrade from XCelsus SP 1 to SP3 with nothing but headaches.  I downloaded Pressent SP3 and found that the flash data connections weren't working.  When I added a connection the preferences and binding info would not appear on the right of the dialog box - it was just blank.  Sfter searching the forums I saw I needed to put on Enterprise SP3 - so I did.  Now when I run Xcelsius my "Connection" button and menubar drop down are grayed out.  I saw somewhere I needed an addin...can't find it.  Not sure why this is so hard.  I REALLY want to clean up some dashboards and take advantage of the multiple indicators on a single gauge but seem to have nothing but roadblocks.  Please help!
    -Gary

    After another reinstall and the SDk pack all looks good!

  • SP3 Upgrade - issue with portalRefresh property

    I had the BEA patch on SP2 to include the portalRefresh property for the .portlet files. After upgrading to SP3, one of my portlets is giving the following error -
    " <h1>Page Flow Error - No Relevant Page</h1>
    <span style="color:red">You have tried to return to a recent page in the current page flow through return-to="currentPage", but there is no appropriate page.</span>
    "No previous page for return-to="currentPage" on action portalRefresh in page flow /Controller.jpf."
    Any ideas?
    Kunal

    Why do you need to create 500 instances of schedules? How are you getting the users to publication? Are they dynamic users or enterprise users?
    If you have a report which gets all the users in the publication, there is no need to create hundreds of schedules for each user.
    'One DB fetch per each user' function - will fecth the data for each user in the publication (Enterprise or Dynamic users) while running the publication.

  • Exchange 2010 SP3 Install Issue

    Got all of our servers updated to SP3 RU 4 but have 1 box not working. It's our second Cas box in our main location
    I have tried multiple times and i keep getting the following error, not sure how to get past this one.:
    Hub Transport Role
    Failed
    Error:
    The following error was generated when "$error.Clear(); 
              if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
                Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
            " was run: "Host name 'LZBEXCH02' matches more than one computer: 'CN=LZBEXCH02,OU=Exchange Servers,OU=WSUS No Reboot,OU=Servers,OU=Monroe,OU=Data Centers,DC=na,DC=lzb,DC=hq' and 'CN=LZBEXCH02,CN=Computers,DC=lzb,DC=hq'.".
    Host name 'LZBEXCH02' matches more than one computer: 'CN=LZBEXCH02,OU=Exchange Servers,OU=WSUS No Reboot,OU=Servers,OU=Monroe,OU=Data Centers,DC=na,DC=lzb,DC=hq' and 'CN=LZBEXCH02,CN=Computers,DC=lzb,DC=hq'.
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:00:31
    Client Access Role
    Cancelled
    Management Tools
    Cancelled
    Finalizing Setup
    Cancelled
    Jessica Cochran

    Did you checked
    CN=LZBEXCH02,OU=Exchange Servers,OU=WSUS No Reboot,OU=Servers,OU=Monroe,OU=Data Centers,DC=na,DC=lzb,DC=hq'
    And
    'CN=LZBEXCH02,CN=Computers,DC=lzb,DC=hq'
    Seems you have duplicate objects

  • Weblogic SP3 Install issues on Solaris 2.6

    I am getting a segment violation error when using Sp3 for weblogic server on Solaris 2.6

    Segmentation violation error where and when?
    while installing SP3 or while starting up SP3 server
    wayne highland wrote:
    I am getting a segment violation error when using Sp3 for weblogic server on Solaris 2.6

  • No Sound - Satellite M105-S3041 XP PRO SP3

    Hi!
    I recently ran into this particular laptop through a client who seemed to have gotten a bad virus.
    I installed a legit copy of Windows XP PRO with SP3 Slipstreamed into the installer disk because I continued to get a STOP error before I could even get anywhere with the windows installation.
    So now everything is running perfectly fine except there is no sound. I have installed all the correct drivers from the toshiba website. I have even run Driver Genius Professional to sort out the couple of yellow question/exclamation marks in the device manager.
    The only question mark left in the device manager is "pci device."
    When I go into control panel to pull up Sounds and Audio Devices everything is grayed out and says "No Audio Device."
    The only thing I can think of that I haven't done is flashed the bios but wasn't sure if that could improve this situation so I thought I'd ask here for some advice. Any response is greatly appreciated.
    Thank You in advance! 

    Interestingly enough I have really no option to uninstall audio drivers. In devince manager > Sound, video and game controllers I have these listed:
    Audio Codecs
    Legacy Audio Drivers
    Legacy Video Capture Devices
    Media Control Devices
    Video Codecs
    I did a search for Realtek and there is a folder in Program Files. If I click on Realtek Audio Control Panel, it will not load.
    Soundman.exe was running in processes under the task manager but I did not recognize any other process related to audio or the realtek control panel.
    Maybe suggesting a different audio driver would do the trick but at this point I'm not really sure what to do. I have never had any difficulties in the past 10 years installing audio drivers/devices... this should technically be easy [i.e. onboard card, using drivers directly off of toshibas website, etc etc]
    The one thing I have not done is ask the client if they even had audio before the virus crashed the computer to see if it might be a hardware issue.

  • Windows 8.1 workstation issues

    Hi
    I have a new Windows 8.1 workstation connecting to OES 2 SP1 servers using Novell Client 2 SP3 for Windows 8 (IR5). A couple of questions:
    1. It appears that the client masks local administrator accounts at login. How are people dealing with single sign-on for administrators that want to have local admin rights and also admin rights on the server they are connecting to?
    2. The client appears to connect to the server (logging in as Admin) but in windows explorer all mapped drives indicate that they are "disconnected" with red "x" but when you click on the drive you have access to the folders & files on the server.
    Am I missing something?
    Thanks,
    Rod

    > Hi
    > I have a new Windows 8.1 workstation connecting to OES 2 SP1 servers
    > using Novell Client 2 SP3 for Windows 8 (IR5). A couple of questions:
    > 1. It appears that the client masks local administrator accounts at
    > login. How are people dealing with single sign-on for administrators
    > that want to have local admin rights and also admin rights on the server
    > they are connecting to?
    > 2. The client appears to connect to the server (logging in as Admin) but
    > in windows explorer all mapped drives indicate that they are
    > "disconnected" with red "x" but when you click on the drive you have
    > access to the folders & files on the server.
    > Am I missing something?
    > Thanks,
    > Rod
    It appears that this trick no longer works.
    Maybe a future update to the client will address it but I wouldn't hold
    my breath.
    From the SP3 'Known Issues'
    4.6 Mapped Drive Icon Doesn’t Update on Re-Authentication
    When you detach from a mapped Novell drive, the mapped drive icon displayed
    in Windows Explorer changes to a red X to indicate that the mapped drive is
    no longer accessible. If you use the Red N icon to re-authenticate to the
    Novell tree (and you selected the Check to always map this drive letter when
    you start Windows option when you originally mapped the drive), the mapped
    drive icon does not update to show that the drive is accessible again.
    However, as you can see, it just gives up from the get go right now.

Maybe you are looking for

  • Query on OBIEE 11g Lookup feature

    Hi All, I am trying to create a dense lookup. Fact table has data at 4 levels. [Grain] Plant,OU,BU,BS Plant will have data for ou, bu and bs OU will have data for BU and BS and like wise for BU and BS. All higher level hierarchies are populated. All

  • Is profimail the only program to read HTML emails?

    Hi all, Is profimail (www.lonelycatgames.com/?app=profimail) the only program to read HTML emails? Overall I think it's a good program and I wouldn't mind paying to buy it. However, it feels very weird that not even top-notch and expensive mobiles li

  • Cannot create a new project in iDVD

    Hi, Wondering if anyone can help with this? This was working fine but for some reason when I now open iDVD and try to create a new project,nothing appears on screen. When I click iDVD it gives me the options and I can click create new project and ent

  • HT201276 tried to download  a program from utorrent when i went to open the program my mac needed to restart. once it restarted it s been frozen ever since.

    downloaded u torrent so i could upgrade to snow leopard. once i did that i went to open the program. it restarted itself and has been frozen ever since. when i turn it on it takes way to long to boot up. and when it finnaly does its freezez on the ut

  • Error when publishing a catalog

    Hello Experts We are on SRM 4.0 EC and using CCM2 When Publishing the catalog we get the following error message Catalog item 4462E4E0CE721B3DE10000000A70D7C7 not found    Catalog update was terminated    The exception occurred (program: /CCM/CL_PE_R