Xserve RAID all 14 hard drive lights yellow

Hey guys,
I just bought a used Xserve RAID to go with my Xserve G5 cluster node. All 14 of the hard drive lights are yellow. Any one have any idea what's going on? Previously, most of them were green with a few yellows. After restarting the Xserve RAID they are now all yellow.

Hey zacharyziegler,
The Yellow status light usually means the Lock is engaged. For more information, see the following User Guide (pg 46):
http://manuals.info.apple.com/en_US/XserveRAID_UserGuide.PDF
Thanks,
Matt M.

Similar Messages

DV6Z laptop with AMD A83530MX and 640GB 7200rpm HDD operating with orange hard drive light active

My laptop seems to be operating ok but the hard drive light recently turned to orange and when operating it blinks orange instead of the white/blinking white. I have tried disabling HP DriveGuard and also re-enabling it, restarting, defragmenting, disk check with windows (with error fix enabled), and even the HP hard drive test in the BIOS. Nothing will change the orange light. Is there something wrong with my hard drive? What can I do to get the light to display correctly?
Thanks!

There may be one or more large folders in your /Volumes folder that shouldn't be there and are using up your disk space.
/Volumes is an 'invisible" folder at the root level of your internal drive which is supposed to contain only the "mount points" for your attached disk volumes, but sometimes an actual folder can mistakenly get created there, often as a result of a failed copy operation such as you experienced with SuperDuper. Such a "ghost" folder will have a name similar to a real external drive, and can contain data that was meant for the real external drive but never got there. When the real external volume then re-mounts, it can no longer use its own name for the mount point in /Volumes because that name is already "taken", and so an extra number gets appended to the mount point. This may have happened twice in your situation, since the actual drive is now mounting as "Untitled 2".
/Volumes is a hidden folder, but it's easy to peek into it. First you should *eject and then physically disconnect all external drives*. Then:
Finder>Go menu> Go to Folder
enter /Volumes and click Go
You should see an alias to the startup volume. Don't touch this, or any other aliases. Do you also see a large folder named "Untitled, and perhaps another folder named "Untitled 1," which are not aliases? If so, delete them, and restart.

MSI P67A-GD65 hard drive light always lit

I built a new pc with this motherboard a few weeks ago and everything is great except for the hard drive light. It stays dim 100% of the time and does show hard drive activity so i know it's working. I switched the connector on the motherboard to see if it was a polarity issue, but then it doesn't work at all. I even used a different LED that wasn't connected to my case and removed all the other connectors (power, reset, etc) and it still stayed dim. Lastly, i removed all the SATA cables from the motherboard, all fan connectors with no luck. I would appreciate any information on this, and if it's normal or if something is wrong and i should RMA the board.
PS - Bios version is 1.9. I never updated it cause everything has been working as it should.

Quote from: NovJoe on 30-May-11, 15:38:56
You should try the board out of the chassis. You may also want to try it in barebone conditions.
I tried that yesterday. Took it completely out of the case and left everything else off the board except for the ram and it still does it. Also used a separate LED to test that wasn't part of the case. In all the years i've worked on pc's, i've never seen this before. I guess at this point i'll have to live with it or buy another one and send this one back for RMA. I contacted MSI and they replied back with a suggestion to update the bios. This is going nowhere. While it probably won't actually hurt anything, i didn't spend $1500 on a new system to have problems with the motherboard.
Can someone help me test by using their MSI P67A-GD65 (B3) board? Disconnect JUST your power light from the motherboard to make sure no other light is interfering with the hard drive light, and see if it's still dimly lit at around 25% to 30% regardless if you're in the bios, or in windows.
Any help would be greatly appreciated at this point.

Do I need to use all the hard drive for time machine or can I partition it

Do I need to use all the hard drive for time machine or can I partition it

You cannot partition a TC disk.
See pondini about mixing data and backups.. but remember this.. the TC has no way to back itself up and TM cannot backup files on the TC. Anything not backed up on the TC will be lost at some future point.
http://pondini.org/TM/TCQ3.html

HT1329 Hi All - My hard drive failed and I am trying to move all my music from my ipod to the new hard drive. I am operating on Win 7 64 bit. Can anyone help please?

Hi All,
My hard drive crashed and is no longer usable. I just installed a new drive however, I am not finding any way to export my recorded CD's from the Ipod touch to the new hard drive. Can anyone help please? I thought by enabling syc with Ipod woudl do it but to no avail.
Thanks

I used a 3rd party program called copytrans http://www.copytrans.net/ that is not free to move my library from my ipod to my itunes library when I had to start from scratch. After that happened I started backing up my music that purchased from the itunes store to a dvd so I would always have it if things went south. Now I always backup my purchased digital music to an optical disc just in case plus everythng else I have is on retail cd's so I can just rebuild my library from scratch again if I have to. You should also regularly back up your itunes media folder to another disc so your entire library will be backed up just in case you should lose your program drive.

How do i copy all my hard drive files to an USB iBook?

How do i copy all my hard drive files to an USB iBook (with a progrgram (no drag-and-drop everything), so I can change out my hard drive, I have a MacBook Pro. Thanks.

Clone Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Select Disk Utility from the main menu then press the Continue button.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the Lion startup volume.

Have a nx9600 and when it tries to reboot, the hard drive light comes on, the 2 lock lights flash

At boot, the hard drive light comes on, the 2 lock lights flash simultanously (A and 1 ) , 2 of the 3 fans come on, then it appears to turn off. It will sit in a loop through the reboot process until the power and the battery have been removed.
Have replaced the drive and the center fan. The replaced fan is new and an HP fan. When I have been able to get it to boot , loaded windows and linux on the new drive.
If it sits long enough and you pray it may reboot. Once I turned it upside down and it rebooted.
Have had the system up and running for hours with no problem, then have to reboot or a shutdown and won't reboot.
Suggestions ?

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. Permissions are set to 'Custom' in the get info window and I can't change them.

All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. I have 3 user accounts set up and I cannot access any of them. Permissions are set to 'Custom' in the get info window and I can't change them. Originally I had Snow Leopard installed on one hard drive and 10.5.8 installed on another. I started to have some problems accessing data between them and so I tried changing the permissions on ONE hard drive partition. The next thing I know, all my drives are locked (except the ones with the systems on them), the small lock appeared in the lower left corner of the drive icons and I don't have permissions to access any of them. In the get info window, permissions are set to 'Custom' and I can't change them.

There is suddenly a lock icon on my external backup drive!
Custom Permissions

I have a MacBook Pro OS 10.9.5 with 250 GB hard drive-- I can't figure out what is taking up all my hard drive space (it is not backups). Any ideas?

MacBook Pro OS 10.9.5, 250 GB solid state hard drive.
I can't figure out what is taking up all my hard drive space (it is not backups). Any ideas?

Does all external hard drives work for mac?

I am buying a imac i want to know weather all external hard drives work for mac?

Not with equal reliability. Avoid Western Digital.
Most reliable are these:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Search their site for various alternatives.

Something is using up all my hard drive space?

Something is using up all my hard drive space and is under 'other' on about this mac..
When I use omi disk sweeper or grand perspective they don't show anything up as using 420GB lol.. So yeah any idea how I can find these hidden files?!
Thanks

ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Do all external hard drives work with my macbook pro?

I just bought an HP Simplesave external hard drive. On the rear of the package, I noticed its compatible with XP, Vista, and 7, but nothing about Mac. I don't want to open it, but I was under the assumption that all external hard drives work on all systems. I didn't think they were operating system specific.
Anyone know about this specific hard drive, and about hard drives in general if my assumption is correct?

The drive should work fine once you've reformatted it for the Mac, but whatever small portion of the purchase price went to cover the included software will be wasted, because HP will only have included Windoze software with it. And in the unlikely event that you ever need to call HP tech support, they'll be clueless about anything involving a Mac. These are the two reason why DP suggests avoiding drives whose makers don't mention anything about use with Macs.

Slow file access-Elements 12: I store all my photo files (".nef" RAW files) in a RAID 1 external hard drive, which the Elements Organizer links to the reference thumbnails. Over some time - say, the past year, and especially recently, the time to bring

One further bit of information: I did recently run a "disc scan", in case there were file system errors, then ran defragmentation -- on the external drive. This did not solve the problem.

I think I'll deal with your different questions in several posts, it'll be easier for me.
josephunit2n a écrit:
A few comments: recently, for the first time, I did a full "backup catalog" routine (with external RAID storage connected) to a second external usb drive, which ran successfully (done, at the time, over longstanding concern that even the RAID 1 storage was not enough data security - as you have mentioned).
Good thing, and it's not really a surprise for me, I would have expected no slow down in a process which only reads your RAID drive data.
One big concern: in all transactions (backup catalog; move to external storage) I always ignore the "reconnect missing files" dialogue. This is due to past experience. Long ago, when I ran it routinely, it was a disaster. At first, I thought I might reconnect a few randomly missing files. While this was so long ago I cannot recall all details, everything went to hell. Even after manually locating a "missing" file, the "reconnect" never worked. The number of "missing" files skyrocketed, far out of any realistic number. Even with Adobe phone support (which is critical for such an application - and must be made available again, I have no problem paying for it), the catalog was hopelessly corrupt, and I manually built a new catalog, file-by-file. Adobe advice then: NEVER USE "RECONNECT MISSING FILES", which I have followed religiously (while also trying to be meticulous in my transactions, not to ever create any "missing" files).
I have never read Adobe advising to never reconnect missing files. Maybe it's not the best course in all circumstances, but I don't see a possible problem there. What is recommended by Adobe is to always reconnect files before doing a backup... Now, my own experience is that if you don't reconnect before a backup you get a restoration where the catalog still points to missing files and where those missing files have not been backed up, totally logical. I would not consider this question as a BIG concern.
. Finally, "just for fun", moments ago I connected the RAID storage drive, opened the organizer, and randomly opened a few images in "full screen" view - then opened a scattered group of 4 or 5 images -- and, they all came up promptly!!!!! So, this "slow access" problem isn't consistent, all the time. Also, I must comment, your advice to avoid the RAID 1 external usb drive, for future catalog storage, seems "tech superstition", which I will not harshly criticize, as I also have my own technology irrational superstitions. I believe the computer "sees" this drive no differently than any other external, usb, drive.
There's a difference between 'technology irrational superstition' and 'reasonable doubt due to ignorance' ... Understanding the problems which may arise when using a RAID drive array supposes understanding of:
- how the organizer catalog recognizes any drive in its database. That's ok for me, but I have no personal experience of such systems. What I can tell you is that most of the problems I have seen with RAID systems were of that kind.
- How efficiently the organizer deals with the OS when using a catalog stored on the main drive, with adequate RAM and scratch disk space while the files themselves are on the external RAID drive. Some organizing tasks imply writing to the files themselves. The xmp sidecar files (very small) are stored together with their raw parent. The thumbnails are stored in a database in the catalog folder...
- How the organizer works with the OS (the APIs) and the particular disk driver. (I am totally ignorant, but I have seen similar problems for other Adobe applications in the feedback forum).
... As I said, I have to leave for a moment...
To be continued!

Dropped frames on Xserve RAID upgraded w/750GB drives.

I'm capturing in 10-bit uncompressed standard definition 720x480. I just upgraded one side of my Apple XRAID, (connected directly via fibre channel) with seven, 750GB hard drives from Apple, drives designed for the XRAID, (came with there own sleds.)
Current Xserve RAID firmware version is at version 1.5.1/1.51c
Before the upgraded drives, no issues with dropped frames, (drives 1-7) the other side of the same RAID has no problems, (currently running 250GB drives, drives 8-14.) All sleds are populated with drives of the same capacity, (respective to each side.)
The drives were formated using the Xserve RAID Admin software and mounted using Apples Disk Utilities, Journaling turned off. The final formated capacity of the RAID on drives 1-7 is 4.1TB.
When I capture to the drives on the upgrade side, I get dropped frames. When capturing to the other side, no issues, works great. I checked the settings for performance and they are the same for both sides, as follows:
Use Controller Write Cashe - ON
Allow Host Cashe Flushing - OFF
Use Drive Write Cashe - ON
Use Steady Streaming Mode - OFF
Read Prefetch: 128 stripes (8 MB/disk)
My capture box is an AJA I/o and has never given me dropped frames till now, but only on the side of the RAID that has the new 750GB drives. I also have another RAID that uses 500GB drives on both sides and it work just fine as well, (no dropped frames) using the same performance settings in XRAID utilities.
Any suggestion on why these new Apple drives modules are dropping frame would be very much appreciate. Again 7 new 750GB drives from Apple w/sleds having dropped frame issues.

I'm capturing in 10-bit to avoid loss of quality from analog sources like BetaCam SP as well as line 21 must be part of the captured file, because it contains line 21 for captioning. Eight bit has a banding issue that I can't have in the final product and 10-bit doesn't have this issue.
Source quality is maintained completely when working in 10-bit uncompressed, as well as the captioning data that I need, which is stripped out of the captured video latter. Captioning software can read line 21 of the raster area, of the captured file.
Source video is from BetaCam SP, DVC Pro and DVCam.
The RAID is an Apple Xserve RAID, connected via Fibre channel directly, (no xsan.)
I also create high quality QuickTime Streaming files from these source files, the higher the quality of the source video the the better the streaming files look when created.
I have never had any problem capturing till I installed these new drives from Apple.
The RAID is as stated above, is an Apple Xserve RAID, connect via a fibre channel card in a Mac Pro 3.0GHz tower, (no xsan is used, due to connecting directly to the XRAID.)

Raid array removed, hard drives now wont work?? help

Hi all,
I had a KT266 pro2RU motherobard with 2 ibm 40gig hard drives that were in raid mode 0,
I took the 2 drives out of the computer and wanted to use one of them in another computer on a standard drive controller (single drive not raid) and i cant seem to access the disk to format it or install windows xp on it?, it keeps saying write access denied?,
I am thinking that i should have unmounted? the raid array before taking the drives out to put them back to normal but dont have the raid system any more, is there any way i can make these 2 40 gig drives work now?, or has it overwritten the HD bios or something?
If anyone can help i'd appreciate it
Cheers

i would try fdisk on it or partition magic if you have that
http://www.bootdisk.com will get you an me boot disk has f disk

Xserve RAID all 14 hard drive lights yellow

Similar Messages

Maybe you are looking for