XSQL output to file

Hi, i've a simple xsql file like that:
<?xml version="1.0"?>
<xsql:query connection="demo" mlns:xsql="urn:oracle-xsql">
SELECT *
FROM Aircraft
</xsql:query>
and i would like to redirect the output of the query in a XML file (like name.xml).
Please helm me.
Thank you.
Andrea

A XSQL query may be developed in JDeveloper.
http://www.oracle.com/technology/pub/articles/vohra_xsql.html

Similar Messages

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

How to remove the extra space in the output pdf file?

Hi All
In our RTF layout template we have both static content and dynamic content.
In RTF template we have used many if-else,choose,For each loops.
On the account of that,In the output pdf file, we are getting lot of empty space in the place of that coding(if-else,choose,For each loops).
Is there anyway to reduce the space in the output pdf file?
Please suggest some ideas.
Thanks in Advance.

White space is NOT your friend!
Make sure you don't have any unwanted whitespace between commands and especially tagged on the end of lines. Chain your commands together with no whitespace and let them wrap, do not enter carriage returns.
Cheers,
Dave

Not able to map contents of xml to output using file adapter

Hi
i m not able to map the output of file adapter to a variable when reading an xml. the data is coming in the file adapter output variable but it is not mapping to other variable in assign or transform activity.I m using jdeveloper 11.1.1.4.0.Can anbody help me plz.
Regards
Sourbh

i am using file adapter as reference to synchronously read an xml file. i am able to see the flow trace in em console. the output variable of file adapter contains the data but when i m trying to assign the value to a variable i getting error. saying that some xpath is not returing any value.
i tried with transform activity also but same case is there.

Monitor CPU and send output to file

Hello
I want to monitor my CPU usage and my idea was this:
1. Use Top (/usr/bin/top –n 1|head –n 3| tail –n 1|awk ’{print $2}’)
2. Send output to file
3. crontab it
My problem is now that my top command (see above) works fine in terminal, it will give me a short and clean answer; 10.5%
But when sending this to a file the output looks more like: 10.5%^^8fewfwe[]€]]@£]@£[f9@£[]^^E^Efewfwef23 (Yes i just hit my keyboard but its alot of randoms characters)
How can i fix this?
Do you have any easier solution to monitor my CPU usage, i want it to be quite often, send cpu usage to file for at least every minute, then i can import this to excel and make nice diagram.
I dont want to install any extra program so ill have to work with whats there already. Im using RHEL 4.
Thanks in advance, Johan

A better way to do it is using "sar"
man sarIt's already builtin and there are plenty of docs on the net.
kido

Output Mutiple Files Using htp.p

Hello,
I wish to output 3 CSV files from APEX I have the following code
Declare
S_FileName VarChar(20);
S_Counter Number;
begin
-- Set the File NAme
S_FileName :=To_char(sysdate,'yyyymmdd')||'Letters.CSV';
For S_Counter IN 1..4 LOOP
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="'||S_FILENAME||S_Counter|| '"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in EMP
for x in (select MPAN_CORE,ACCOUNT_NO
from Categoriser.LTNA_LETTER_ONE_OUTPUT@link_to_dqmDevdb )
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn(x.MPAN_CORE ||','|| x.ACCOUNT_NO ||','||
x.MPAN_CORE || chr(13));
END LOOP;
END LOOP;
-- Send an error code so that the-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;
At this stage i only want to output 3 files the content is not a issue
I it possible to do this with APEX?
Any help on this is greatly appreciated.
David

I take it from the lack of response that this is not somthing that APEX can do?No, it's something that HTTP cannot do. Think about it: if it was possible for a server to send multiple files in response to an HTTP request, then it would be possible to break your computer very easily indeed.
aww well looks like i will need to find another way..You'd need something in the browser client-side, Java applet, Flash control etc...

Java.sql.SQLException: File input/output error: File input/output error: re

Hi,
We are using JCAPS 512. We use oracle eway to connect to Oracle 10g database. But sometimes we are getting the following exception
and suddenly all jcds stop processing. If we restart the server again job continue processing, otherwise server hangs and nothing get processed.
Exception is as follows
java.sql.SQLException: File input/output error: File input/output error: reading: java.io.EOFException in statement [SET TABLE EVENT_STORE INDEX '11183416 55935']
     at org.hsqldb.Trace.getError(Unknown Source)
     at org.hsqldb.Log.runScript(Unknown Source)
     at org.hsqldb.Log.open(Unknown Source)
     at org.hsqldb.Database$Logger.openLog(Unknown Source)
     at org.hsqldb.Database.open(Unknown Source)
     at org.hsqldb.Database.<init>(Unknown Source)
     at org.hsqldb.jdbcConnection.openStandalone(Unknown Source)
     at org.hsqldb.jdbcConnection.<init>(Unknown Source)
     at org.hsqldb.jdbcDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.addNewConnection(DBEventStore.java:359)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.getConnection(DBEventStore.java:444)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.executeParameterizedQuery(DBEventStore.java:777)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.access$000(DBEventStore.java:250)
     at com.stc.eventmanagement.impl.DBEventStore.getEventIDsList(DBEventStore.java:133)
     at com.stc.eventmanagement.impl.DBEventStore.getEventIDsList(DBEventStore.java:115)
     at com.stc.eventmanagement.impl.EventForwarderMBean.cachePersistedEvents(EventForwarderMBean.java:728)
     at com.stc.eventmanagement.impl.EventForwarderMBean.setup(EventForwarderMBean.java:334)
     at com.stc.eventmanagement.impl.EventForwarderMBean.invoke(EventForwarderMBean.java:565)
     at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
     at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
     at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
     at com.stc.eventmanagement.impl.EventManagementService.setupEventForwarderMbean(EventManagementService.java:270)
     at com.stc.eventmanagement.impl.EventManagementService.registerMBean(EventManagementService.java:147)
     at com.stc.eventmanagement.impl.EventManagementService.startService(EventManagementService.java:96)
     at com.stc.eventmanagement.impl.EventManagementResourceAdapter.start(EventManagementResourceAdapter.java:75)
     at com.sun.enterprise.connectors.ActiveInboundResourceAdapter.<init>(ActiveInboundResourceAdapter.java:94)
     at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:74)
     at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:269)
     at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:372)
     at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:204)
     at com.sun.enterprise.server.ConnectorModuleLoader.load(ConnectorModuleLoader.java:87)
     at com.sun.enterprise.server.ConnectorModuleLoader.load(ConnectorModuleLoader.java:108)
     at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:216)
     at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:106)
     at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:183)
     at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:295)
     at com.sun.enterprise.server.PEMain.run(PEMain.java:238)
     at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
|#]
Please provide some suggestions to overcome this error
Regards
Venkatesh.S

Delete the EventStoreDb.data file (its somewhere in your logical host) and restart the logical host.

Invoking a call to a window executable fails when request output to file

Hi,
When invoking a call to a window executable it fails(returns 1 instead of 0) when requesting output to file by using "> filename.txt". This nornally works when run directly within a
windows command prompt, and it also works if I don't add the "> filename.txt" at the end. Also instead of outputting to a file I would like the same called executable to output to a memory variable that I can extract data without going to a external text file.
Below is the .java file
package com.insequence.gv;
public class Jinvoker {
          public static int invoke(String program) throws java.io.IOException, java.lang.InterruptedException
               System.out.println("invoking program: " + program);
               Process p = Runtime.getRuntime().exec(program);
               int exitValue = p.waitFor();
               return exitValue;
          public static void main(String[] argv)
               try
               System.out.println("invoker start");
//               int retval = invoke("c:\\tvalesky\\java\\invoker\\targetexe arg1 arg2 arg3");
//               int retval = invoke("C:\\Program Files\\FWTools1.1.0\\bin\\gdalinfo.exe C:\\data\\EarthData2005\\Ortho\\no_collaged.tif");
               String arg1 = "C:\\data\\EarthData2005\\Ortho\\no_collaged.tif > c:\\testing.txt";
//               String arg1 = "C:\\data\\EarthData2005\\Ortho\\no_collaged.tif";
               int retval = invoke("C:\\Program Files\\FWTools1.1.0\\bin\\gdalinfo.exe " + arg1);
//               int retval = invoke("C:\\Program Files\\FWTools1.1.0\\bin\\gdalinfo.exe");
//               String arg1 = "-s_srs epsg:26915 -t_srs epsg:4326 C:\\data\\EarthData2005\\Ortho\\no_collaged.tif C:\\data\\EarthData2005\\Ortho\\no_collaged2.tif";
//               int retval = invoke("C:\\Program Files\\FWTools1.1.0\\bin\\gdalwarp.exe " + arg1);
//               int retval = invoke("C:\\testing.bat C:\\data\\EarthData2005\\Ortho\\no_collaged2.tif");
               System.out.println("invoker end: returned " + retval);
               catch(java.io.IOException e)
                    System.out.println("IOException caught: " + e);
               catch(java.lang.InterruptedException e)
                    System.out.println("InterruptedException caught: " + e);
Thanks,
John Mitchell

Well, if you ultimately want the output from the process, you don't need to redirect it to a file first. Just read from the standard output of the process. See [url http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Process.html#getInputStream()]Process.getInputStream and Process.getErrorStream. You'll need to read from both simultaneously so you'll need to create two threads. You could also use [url http://java.sun.com/j2se/1.5.0/docs/api/java/lang/ProcessBuilder.html]ProcessBuilder if you're using Java 1.5

Output XML file problem (in FILE to RFC scenario)

hi,
   my problem is that in the export parameter i have 3 variables but my output xml file shows only 2 parameters . I have checked my mapping all 3 parameters are mapped properly in output mapping .
Initially when i started the scenario there were only 2 parameters in my export list .
i completed this suuccesfully and then as per new requirement one more parameter was needed to be added i added a new parameter and reimported my rfc .
the response tab of the reimported RFC shows me the newly added parameter but my final xml file only shows me the previous 2 it doesnt show me the newly added one is there any seeting which i need to change like in idoc where we have to readd the idoc in IDX2
With regards
Bhawarlal Choudhary

Hi,
2 Introduction
Configuring IDoc adapter in Exchange Infrastructure 3.0 requires some configuration on the SAP
systems, for both XI and the backend system where the IDoc message is to be sent. These steps, although
simple, are many times missed or mis-configured, causing the delivery of messages to fail.
Since IDoc adapter uses the ABAP stack, instead of J2EE, the configuration requirements are mainly in
ABAP.
Setting up IDoc adapters requires the XI integration server to be able to communicate with the backend
SAP system, and also to make sure that the Logical System Name used when posting IDoc exists on the
backend SAP system.
3 The Step By Step Solution
The basic steps for the IDoc configuration are outline below:
1. Configure SM59 on XI to communicate to SAP backend system.
2. Configure port on XI for IDoc communication.
3. Create or verify the Logical System Name on the SAP backend system.
4. Create or verify business system in XIs System Landscape Directory.
5. Verify the Logical System Name of the business system.
6. Verify or add the Logical System Name for the sender business system.
7. Create/configure the Communication Channel for the IDoc receiver adapter
3.1 Configure SM59 on XI to communicate to SAP backend system.
1. Using transaction SM59, create an RFC destination with Connection Type = 3.
In this example, the RFC destination name is NDVCLNT510.
2. Enter the logon information:
3. Test the connection by clicking on Testing connection and Remote logon.
Both must be successful.
3.2 Configure port on XI for IDoc communication.
4. Go to transaction IDX1 on XI, and create a port. In this example, the Port name is SAPNDV.
     The Port name must be in the form of SAPxxx, where xxx is the system ID of the backend SAP
system.
     The Client must be the client number of the backend SAP system.
     Select the RFC Destination which was created in the previous step.
3.3 Create or verify the Logical System Name on the SAP backend system.
5. Enter transaction SALE on the SAP backend system.
6. Create or verify the Logical System Name. In our example, NDVCLNT510 is verified.
3.4 Create or verify business system in XIs System Landscape Directory.
The business system name for the SAP backend system must contain a valid Logical System Name. This Logical System Name is the one verified or created in the previous step.
7. In the System Landscape Directory, select the SAP backend business system. If one does not exist, then create the business system. Verify the Logical System Name.
3.5 Verify the Logical System Name of the business system.
8. In the Integration Directory, doubleclick on the business system (in our example, it is NDVCLNT510).
Navigate the menu:
Service Adapter Specific Identifiers.
If information is empty or incorrect, then it will have to be synchronized with the content of the System Landscape Directory. Follow the steps below for synchronization.
9. (Optional) Synchronization of the business system in Integration Directory to the business system in System
Landscape Directory.
     Double-click on the business system in the Integration Directory.
     Switch to Edit mode.
     Select menu: Service Adapter-Specific Identifiers
10. (Optional) Within the dialog box, click on the button as indicated below to resynchronize.
11. (Optional) If the expected data from the System Landscape Directory is not updated, then the SLD cache may need to be cleared first.
3.7 Create/configure the Communication Channel for the IDoc receiver adapter.
15. In the Integration Directory, create an IDoc receiver communication channel.
     The RFC Destination is from step 3.1.
     The Port is from step 3.2.
NOTE:
There is no need to create an IDoc sender Communication Channel for XI. Instead, the backend SAP system must be configure to send the IDoc to XI.
4 Appendix
Transaction: IDX2
There are a couple of situation where IDX2 can be useful on the XI system.
1. When we want to test connection between the XI and SAP backend system.
2. When an IDoc has changed, and the meta data stored in XI needs to be update. When an IDoc is sent from the SAP backend system to XI, XI will first check to see if the meta data for the IDoc is already in its persistent cache. If not, then XI will use the configuration in IDX1 to retrieve the IDoc meta data from the backend system. If the
meta is already in cache, then it will NOT do so. Therefore, when an IDoc has changed, it is necessary to manually update the new meta data on XI, or delete it from the cache, so that the latest version can be retrieved. IDX2 is used for this purpose.
Go to transaction IDX2 and click on Create.
Enter the IDoc Type and the Source Port as defined in step #2. Click Continue.If successful, the following will show up. If error occurs, then the IDX1 configurations will need to be re-checked.
Regards
Hemant
If find helpful plz award points

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

Junk Characters in the output XML file after Parsing

Hi
I am using DOM parser to parse an XML file.
After parsing the input XML file, i am fetching some contents
from the same and also putting the same contents in the parsed output file which is also an XML file.
The problem here is that the after putting the contents to the output XML file from the input XML file,
some junk character appears at the end of each and every tag in the outputfile.
The junk character is some thing like this : " ampersand hash thirteen and a semicolon "
(*THE MESSAGE DID NOT ACCEPT THE SYMBOLS KINDLY TRANSLATE THE ABOVE WORDINGS*
INTO SYMBOLS)
This character gets appended at the end of each and every tag in the output file due to which the output file
is not recognised as an XML file.
Please let me know as to why is this character appearing and also please suggest some solution
for the same.
-Thanks in Advance.
Edited by: itskarthik on Oct 10, 2008 7:16 AM
Edited by: itskarthik on Oct 10, 2008 7:18 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM

Wierd.
Try this piece of code. (You can always change it to use input file and output file instead of string if you want)
What is your output?
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
public class XMLTest {
     public static void main(String[] args) throws Exception {
          String input = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n" +
                              "<test>\r\n" +
                              "</test>";
          System.out.println("Input:");
          lookForCR(input);
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          Document doc = factory.newDocumentBuilder().parse( new ByteArrayInputStream(input.getBytes()) );
          Source source = new DOMSource(doc);
          ByteArrayOutputStream bArrOut = new ByteArrayOutputStream();
          Result result = new StreamResult( new StripOutputStream( bArrOut ) );
          Transformer xformer = TransformerFactory.newInstance().newTransformer();
          xformer.transform(source, result);
          System.out.println("\nResult:");
          lookForCR(bArrOut.toString());
          System.out.println("\nDone");
     public static void lookForCR(String input) throws Exception {
          char[] chars =input.toCharArray();
          for ( char chr : chars ) {
               if (chr == 13 ) {
                    System.out.println("Has 0x0D character!!");
class StripOutputStream extends OutputStream {
     OutputStream out = null;
     public StripOutputStream(OutputStream out) {
          this.out = out;
     @Override
     public void write(int b) throws IOException {
          if ( b != 13 )
               out.write(b);
}- Roy

Special characters issue in output XML - file adapter - SOA 10.1.3.4

Hi,
I use a DB adapter and File adapter to retreive data from database and create output XML file.
For the database record which have special characters (for example ' , <, >), it will just output the same character in XML file, which cause other system to reject this XML file because of those characters.
Anyone have this issue ? How can i resolve that ?
Thanks

Try converting the characters to < and >. This should work. Make sure the stand-alone & character is converted to & amp; (written with space as HTML will convert it back to &).
-AR

Convert created idoc to an output text file

Hi,
How can i convert an idoc to an output text file? is there a standard program in SAP that does this?
Thanks,
Tots

Hi,
We can do it.
The steps are
1. Create a xml file port (we21)
2. Create a partner profile point to the file port.
3. Make sure the idocs are genereated.
4 . Run the staandard program (RSEOUT001) with the port and required details in teh selection screen.
The idocs will be generated to a xml file .
Regards

How to change the output executable file name(a.prj:(output)--- b.exe)

LabWindows / CVI： how to change the output executable file name
For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
I will try to save as a.prj b.prj, a.cws save as b.cws
eg:a.prj ---->(output)--->b.exe
Solved!
Go to Solution.

You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
See the complete description of available options here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

XML stream and stored as an output XML file

Dear ALL,
Could you help me in such situation?
I need create XML file. I have DTD file. I create XML stream and stored as an output XML file. But all the data of my XML file stored in one line.
How I can create my XML file according to DTD file?
Thanks a lot.
Best regards,
Igor

hi
good
go through this links,hope these would help you to solve your problem
http://rustemsoft.com/JSPsample.htm
http://publib.boulder.ibm.com/infocenter/wsphelp/index.jsp?topic=/com.ibm.etools.xmlbuilder.doc/tasks/txmltask.htm
thanks
mrutyun^

XSQL output to file

Similar Messages

Maybe you are looking for