Yellow triangle with "!", red and green lines

why is this showing up on parts of my clip?

this is the range check feature showing if you have legal luma levels (green check) or illegal levels (yellow !)
try searching the PDF manual with the term "range check" to get a greater understanding of the feature and how it can help you (as well as how to disable and enable it)
DAVE
http://www.proapptips.com

Similar Messages

  • How can I remove red and green lines from a footage?

    I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

    @Ann Benns
    I will try to do that. Thank you!
    @Bill Hunt
    Well, the raw footage is an avi filmed with a handycam. This error occurred
    the next day after I finished the editing in Adobe Premiere cs5. It might
    be something wrong with the title graphics that I use, but still if there's
    a solution I would like to find it out as this error occurred before.
    Cristina

  • Attempt to play video in timeline causes red and green lines in Canvas

    Hi!
    When I hit the spacebar in FCP's timeline to play, sometimes I get red and green lines in the Canvas (looks like some wierd color digital interference). If I then hit the spacebar again, the audio will play, but with the same red & green lines. If I then hit it a third time, my video will play fine.
    What the heck? Any ideas? This only happens every once in a while.
    Thanks for the input!
    My specs:
    G5 Dual 1.8 GHz processor
    Version 10.3.9 OS
    4GB Memory
    QT version 7.0.2
    not connected to the internet

    To be sure you'll need to include some more details, what version of FCP, and your current sequence settings, but I think I could make an honest assessment, right now. Make a note of your sequence settings, then trash your preferences, but make sure that you close final cut, also once preferences are trashed you'll lose sequence settings, and window configurations if you haven't saved them. So be sure to back them up, before trashing preferences.
    You can find preference by following these commands:
    1.type shift command h - this opens up your home directory
    2.open the Library folder //----SPECIAL NOTE Be very careful in this folder do not move or delete any folders in here.----\\
    3.open the Preference folder //----SPECIAL NOTE Be very careful in this folder do not move or delete any folders in here.----\\
    Now find and delete these 4 files:
    1.com.apple.FinalCutPro.plist
    Navigate to the Final Cut Pro User Data inside the Preference folder and delete the three remaining Final Cut Prefs Files They are as follows:
    2.Final Cut Pro 5.0 Prefs //*This may be 3, or 6 depending on your FCP version.
    3.Final Cut Pro Obj Cache
    4.Final Cut Pro Prof Cache
    Remember do not trash any folders period, nor move anything, delete on those 4 files, and remember once you delete them make sure you trash them from the drive, go to trash empty trash. You'll have to reconfigure any unsaved layout workspaces and system sequence settings.
    This Clean system should be done once a year, but only if you notice FCP having problems.
    Hope it helps.
    J.

  • Vertical red and green lines on my screen

    Today I was rendering a bass track in Protools, I do that a lot and always without problems, also today.
    It worked fine and I saved the render. Then I had to go for a while and left my mac on, when I came back I touched my mouse
    and bam! stuck! I work with two synced apple cinema screens, the left screen got vertical red and green lines and the right screen stayed black...
    I am in a big worry because there is four weeks worth of editing on this computer. Does anyone know what I could do about this?

    I suppose it's a graphic card failure. You'd better get new one.
    http://store.apple.com/nl/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-voor-mac-pro-(medio-2010)?fnode=53
    mini display to DVI adaptor as well.
    http://store.apple.com/nl/product/MB570Z/B/mini-displayport-naar-dvi-adapter?fno de=53

  • Qosmio F30-117 - Display issues - red and green lines

    Hi there,
    I have a qosmio F30-117 and up to recently, I was delighted with everything about it.
    Then, mid session, the graphics began to deteriorate, which a reboot fixed.
    Then a few days later, it did it again and this time when I rebooted it came up with a corrupted display, lots of aa's all over the place then lines of red and green all over.
    Managed to get in by selecting safe mode with networking and got a desktop although still with the red and green lines all over it.
    Now its gotten worse still, when I boot up the laptop screen itself is blank, its getting something because it isnt totally black like it is when its powered off, but its blank.
    As a check I connected an external monitor and managed to get in again to safe mode with networking, but its still very bad, and still has the red and green lines all over.
    I started to have a look around on the good old www and there are numerous posters and articles with problems, and lots mentioning the red and green lines etc...
    so Im not alone, but no-one seems to know exactly what it is.
    Some have mentioned Toshiba acknowledging this as a problem and doing repairs even if out of warranty.
    So, any ideas, any advice, and does anyone know if Tosh have indeed accepted the problem and offering any help??
    Thanks in advance

    Hi
    I think it's a common problem in the Qosmio F30 models. After long term use, the soldering balls under the GPU chipset start to melt down because of the over heat and the bad soldering quality that was used with the F30 model that cannot resist high temperature. Now you have to replace the motherboard, since the GPU is build within the motherboard.
    However, there is another two solution for this problem and cost less money amount:
    1- do what is called a "heat reflow" for the VGA chipset: to do this you have to take the motherboard out and heat the VGA chipset on the motherboard with a heat gun or you can bake it in the oven for a few minutes at low temp, this will make the soldering balls melt and go back to there right position. However, you need to keep in mind that this solution is temporary and will last maybe for month then you have to do it again and again till you ruin the GPU and then the only solution will be to buy another motherboard. So I don't recommend that you do that at all, but if you don't want to spend a lot of money on a new motherboard this will help you to recover your data, even though there is more easier solution to do the recovery.
    Anyways, you can go to youtube and search the term "VGA heat reflow " to see how people do it.
    2- send your motherboard to a repairing service that can do what is called reballing: what they do is that they will replace the soldering balls under the VGA chipset with new ones that can resist high temp. and this solution is permanent and even in the future you don't have to worry that the same problem will happen again since the new soldering balls can take high temp change. I do recommend this solution even more than buying a motherboard, since the motherboard that you will get will generate the same problem after few years.
    you can find this type of repair service online if you googled the term "VGA reball repair" or you can find it on ebay
    If you decided to replace the motherboard I think you will not be able to find a new one, and in case you found one it will be more expensive than a new laptop, but still you can find used motherboard for your qosmio on ebay or online. so you need to do a search and find out what fits your budget or maybe it's better to buy a new laptop.
    Sorry about your qosmio, and hope that my post will help you!

  • Read yellow color from red and green colors

    hi everyone
    need help in extracting yellow color from red and green colors (RGB space).
    before that, the B channel was set to zero.
    can display RG and CMYK together (like Adobe Photoshop)?
    thanks.
    mySiti

    hi everyone
    need help in extracting yellow color from red and green colors (RGB space).
    before that, the B channel was set to zero.
    can display RG and CMYK together (like Adobe Photoshop)?
    thanks.
    mySiti

  • Ipod touch 4 has a black screen with white and green lines across it and wont turn off

    My sons ipod touch has a black screen with sometimes white lines and then flashes to colored lines. Also when i try to turn it off it turns right back on and has the apple symbol but then goes back to black screen with lines. what to do?

    - Try:
    iOS: Not responding or does not turn on
    - If not successful let the battery fully drain. After charging for at least an hour try again.
    - If still problem time for an appointment at the Genius Bar of an Apple store.

  • Removing red and green grammar error lines in Adobe reader?

    How do i remove the green and red lines in Adobe Reader?
    They are spelling and grammatical errors, and they appear on printed documents?
    Is it from Microsoft word that i converted it from, as i turned off grammatical and spelling errors from word options, proofing etc.
    I don't want them on my printed material, so what would i go about doing?
    If someone could point me in the right direction then that would be great.
    Thankyou.

    The PDF document was created in microsoft word, also the parts that have the green or red wavy underlines, are imported from Powerpoint.
    Is there a way to remove these red and green lines without having to edit the powerpoint parts eg instead of going into power point making the changes and then bringing them into word again.
    So if they could be removed from the word document alone.
    Thankyou.

  • In iMovie: I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?

    in iMovie:
    I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?
    please help.
    J. Aalbers

    Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
    Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

  • I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    Hello zukafu, 
    Welcome to the forums. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
    Thank you
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Restarted my Mac and a white screen appeared, remained, and a yellow triangle with an explanation point stating Start up disk full- Help!!!!

    I updated a couple days ago to OS x Maverick, everything on my Mac was working fine after update. But, Than today When I went to do stuff on my Mac it was frozen. So, I turned it off. When i turned it back on, the apple icon was on the screen and you can see that it was loading, but after several seconds it went to a white/grayish screen and a yellow triangle with an explanation mark popped up with a warning saying that "startup disk is full" i clicked okay and the warning went away but the white screen remained. I did do a Command R and pulled up the utility disk where I did repair disk, and than permission to repair, but it did not work. I think i need to erase some files and so forth, but I cant get  past the white screen and into the desktop  in order to do get to files to delete. Please help!
    Thank you

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • My ipod will not stay connected to my computer.  When first plugged into the usb port, I can see it as a drive.  Within seconds it disappears.  If I look in the devices area, I can see it but it has a yellow triangle with an exclamation point beside it.

    When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears.  It can be seen under devices but as a yellow triangle with an exclamation point in it.  If I run trouble shoot, it states windows is disconnecting this device. 
    I can see it in itunes as a device.  However, this is a brand new computer, running windows 7.  My last one bit the dust in mid use.  I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
    Any help would be greatly appreciated.

    Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
    Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
    If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
    Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
    Anyway, just hard reset your iPod, so that we can start from scratch
    1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
    2. Connect it back to your Notebook or Desktop.
    if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
    Good luck!

  • PDF icons suddenly have a yellow triangle with an "!"...

    suddenly my pdfs have a yellow triangle with an "!" in it as the default icon in the Finder (running 10.5.8). if I choose Get Info and change the default "Open with..." application from Preview to Adobe Acrobat, it's fine, the icon shows up as an Adobe Acrobat icon, but if I change the default program back to Preview the yellow triangle comes back. this was not the case a few days ago. not sure what I did to make this happen.

    Yam--
    First question: is all your software up to date? (better yet--has it been updated recently?)
    Doc

  • Yellow triangle with exclamation mark under iPod Properties - Hardware

    I am not able to see my iPod shuffle icon on itunes.  When I viewed iPod properties - hardware, I see a yellow triangle with an exclamation mark and it says, "USB Mass Storage Device". What does this mean and how can I fix it?  Also, device status:  Windows in uninstalling this device. (Code 21)

    Since you use Windows XP, see if this document and procedure related to the iPod's drive letter is applicable.
    http://support.apple.com/kb/TS1493

  • Portal content not transporting.  Yellow triangle with exclamation shows.

    Hi,
    I cannot move 2 new folders and 10 iViews from my DEV portal to my QC portal.  When I try, the package shows up in QC, but when I look at the package, a yellow triangle with a exclamation point inside shows to the immediate left of the items to move.  And if I select any one of the objects to get properties, I get the errror "Failed to get Property Editor! null".  Further, I cannot create the folders manually on QC, because it get an error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
    Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
    SQLException is not transient, error code = 1, sql state = 23000 ORA-00001: unique constraint (SAPEP2DB.SYS_C00123629) violated .
    Exception id: 12:08_16/03/07_0005_6336351
    See the details for the exception ID in the log file
    One of the iViews is built from a custom PAR.  When I first attempted to import this package, the PAR did not exist.  I have since loaded the PAR.
    It seems that the folders exist "somewhere" in the portal, but I cannot see them in the "content admin" mode.
    What can I do to resolve this?
    Thank you for any help!
    Kevin

    This has been solved.  I noticed that other portal developers could see the content without error.  As it turns, what I had to do was refresh cache on the server, and clear my browser cache.  Once I did this, everything appeared as normal. 
    Thanks for the help.
    Kevin

Maybe you are looking for