Yosemite Upgrade CS4 doesn't work anymore

I have recently upgraded to Mac Yosemite and I have done the update javaForOS2014-001. Since then I have received a popup license does not function any more. Fault 150:30. Can anybody help?

Same problem here. (08/08/2008)
Did a pacman -Syu. After the updates, I rebooted.
I don't use KDM - just type startx at the command line.
KDE appears to start with appearing icons showing progress but
then ends with the KDE Crash Handler.
A Fatal Error Occurred.
" The application Plasma Workspace (plasma) crashed and caused the signal 11
(SIGSEVG)
I then end up with a blank screen with mouse cursor. The screen is not frozen - can move mouse.
I do CTRL+ALT+Backspace to get back to the CLI.
List of packages updated:
pacman (3.1.4-1 -> 3.2.0-1) libXKlavier (3.5-1 -> 3.6-1)
libassuan (1.0.4-2 -> 1.0.5-1) kdebase-workspace (4.1.0-4 -> 4.1.0-5)
libksba (1.0.2-1 -> 1.0.3-1) man-pages (3.03-1 -> 3.05-1)
fakeroot (1.9.3-1 -> 1.9.5-1) nvidia-utils (173.14.09-1 > 173.14.12-1)
ghostscript (8.63-1 -> 8.63-2) nvidia (173.14.09-4 -> 173.14.12-1)
gnokii (0.6.22-3 -> 0.7.5-1) pciutils (2.2.8-3 -> 3.0.0-2)
gnupg2 (2.0.8-1 -> 2.0.9-1) sqlite (3.5.9-2 -> 3.6.0-1)
hplip (2.8.2-2 -> 2.8.7-2) qt (4.4.0-7 -> 4.4.1-1)
xkeyboard (1.2-1 -> 1.3-1) phonon (4.2.0-1 -> 4.2.0-2)
pm-utils (1.1.2.2-1 -> 1.1.2.4-1)
I suspect I need to wait for more updates in a day or so.
bilwil

Similar Messages

KDE 4.1: after a normal upgrade, kde doesn't work anymore

I been using KDE 4.1 for some couple weeks and everything was fine since yesterday when as I usual do, I upgraded the system. That seems the main reason because now kdm still working, I selected KDE session to start kde but then nothing else happens! My screen is full of some squares black & white lines pixels. No taskbar, no icons... no desktop at all.
My first reaction was ok, let's just delete all the old config .kde and .kde4 and start a fresh KDE but no luck . Then I decided to reinstall pacman -S kde and delete again all the config, reboot... nothing. Here is the list of packets since this problem appears:
[2008-08-06 19:46] synchronizing package lists
[2008-08-06 19:46] starting full system upgrade
[2008-08-06 19:50] upgraded archlinux-themes-kdm (1.1-2 -> 1.2-1)
[2008-08-06 19:50] upgraded kdebase-workspace (4.1.0-4 -> 4.1.0-5)
[2008-08-06 19:50] upgraded pciutils (2.2.8-3 -> 3.0.0-2)
[2008-08-06 19:50] upgraded phonon (4.2.0-1 -> 4.2.0-2)
[2008-08-06 19:50] upgraded qtcurve-kde4 (0.59.6-2 -> 0.59.6-3)
thanks
Last edited by miguimon (2008-08-07 02:24:31)

Same problem here. (08/08/2008)
Did a pacman -Syu. After the updates, I rebooted.
I don't use KDM - just type startx at the command line.
KDE appears to start with appearing icons showing progress but
then ends with the KDE Crash Handler.
A Fatal Error Occurred.
" The application Plasma Workspace (plasma) crashed and caused the signal 11
(SIGSEVG)
I then end up with a blank screen with mouse cursor. The screen is not frozen - can move mouse.
I do CTRL+ALT+Backspace to get back to the CLI.
List of packages updated:
pacman (3.1.4-1 -> 3.2.0-1) libXKlavier (3.5-1 -> 3.6-1)
libassuan (1.0.4-2 -> 1.0.5-1) kdebase-workspace (4.1.0-4 -> 4.1.0-5)
libksba (1.0.2-1 -> 1.0.3-1) man-pages (3.03-1 -> 3.05-1)
fakeroot (1.9.3-1 -> 1.9.5-1) nvidia-utils (173.14.09-1 > 173.14.12-1)
ghostscript (8.63-1 -> 8.63-2) nvidia (173.14.09-4 -> 173.14.12-1)
gnokii (0.6.22-3 -> 0.7.5-1) pciutils (2.2.8-3 -> 3.0.0-2)
gnupg2 (2.0.8-1 -> 2.0.9-1) sqlite (3.5.9-2 -> 3.6.0-1)
hplip (2.8.2-2 -> 2.8.7-2) qt (4.4.0-7 -> 4.4.1-1)
xkeyboard (1.2-1 -> 1.3-1) phonon (4.2.0-1 -> 4.2.0-2)
pm-utils (1.1.2.2-1 -> 1.1.2.4-1)
I suspect I need to wait for more updates in a day or so.
bilwil

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps wit

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps with ios7

Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past. With the new operating system you also swipe downward to get the search bar to find an app

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572 This seems to corrected the issue.

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself.

I used to be able to select an arbitrary "column" in MS Word, but since upgrading to OS 10.9.4 and MS Word for Mac 2001 v. 14.4.3, it doesn't work anymore. Is there any way to get this handy functionality back?

I used to be able to select an arbitrary "column" in MS Word, but since upgrading to OS 10.9.4 and MS Word for Mac 2001 v. 14.4.3, it doesn't work anymore. Is there any way to get this handy functionality back?

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

I have a late 2006 iMac upgraded to lion, Quicktime doesn't work anymore. Preview won't show images, any ideas anyone?

I have a late 2006 iMac upgraded to lion, Quicktime doesn't work anymore. Preview won't show images, any ideas anyone?

You are correct....it will not work. Please carefully read Apple's Target Display Mode: Frequently Asked Questions (FAQ)

Su doesn't work anymore but sudo works

Hi all,
I normally use my standard user account but when I'm installing with macports I routinely "su" into root to do things.
Today I went on my machine and noticed that "su" wouldn't work. Before anyone decides to tell me that I don't need to use "su", I realize that but I use it for my own purposes.
From the system log I am seeing this each time "su" fails:
su[1376]: pam_authenticate: Permission denied
What is interesting is that doing a "sudo su" works, and I'm able to do all of my admin duties that way.
I have a feeling something messed up my bash profile but not totally sure. Has anyone else run into this issue?

Hi all,
Thanks for the help on this issue.
I'll clarify: I'm using this install as a server and this is why I have 2 admin accounts on it. The original account is my own; the one I created when I first installed OS X. I then enabled System Admin (root) so that is the other admin account. After installing MacPorts I have been running the system as a multi-user webserver. I occasionally log in as root to do maintenance and upgrades. I have found that it's easier to use the SysAdmin account in certain situations because of permissions issues and ease of installing upgrades.
I'll often log in under my username and then su to root. Recently (yesterday) I noticed that "su" didn't work anymore when I used my normal username.
There are sometimes that I will log onto the machine as System Admin and usually via the terminal (console) I can log in as any of the other accounts by doing
su <username>
this also doesn't work anymore. I get the error:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
I have two servers set up this way. One works the way it should, the other one has this problem. The only difference I can see is in roots bash profile but I'm not sure why they are different on each machine.
Also when logged in as System Admin, I should be able to turn off "allow user to administer computer" on my regular account but it's grayed out. On the other similarly configured machine, under the same conditions, I can. I'm not sure why I can do it on one and not the other.
I've tried turning off enable root via Directory Utility but that didn't fix the issue.

Time Machine Just Doesn't Work Anymore

I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.

Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers!

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

I have an Iphone 3GS and the app for Facebook doesn't work anymore...

I have an Iphone 3GS and the app for Facebook doesn't work anymore since last update made yesterday.
How can I restore it without the last update?
Or, what can I do to have the Facebook back again on my mobile?
Thank you for your help.

Hi Ricoco,
I too had exact issue what you were experienced, then I went to Apple autorised service center and submitted my earpods, their it worked with all versions of Apple iphones, but it didn't worked on my 3gs. The service technician suggested for OS upgrade.Then I came home and I took the backup and upgraded 5.1 to 6.1 as he suggested, also it didn't worked. I was totally frustated and suddenly I got an idea!. What a funny thing here is, a safety pin resolved my issue, I took out all dust which was there in the jack hole. Then I check my earpods, it was amazing you know..MY EAR PODS WORKED!.
If you still have this issue, I hope this will help you.
Umesh

Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro...

Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro, running Mac OS X Yosemite 10.10.2. I don't know why, because Photoshop Elements has always worked properly before today.
Quite disappointing. I installed the application in May, 2014, downloading it from the App Store, and now I would like to re-install Photoshop Elements.
Can you help me, please?

Command + shift + alt... and it works again! Thanks a lot.

All of a sudden, report doesn´t work anymore

Getting really tired of this whole SCOM-thing the last days.
Now the reporting doesn´t work anymore. We changed NOTHING.
State went from Zero to Healthy 4:14 PM on friday last week. Alright.
But a few hours later, when nobody was here anymore, it changed to EROR.
How can that happen?
Reports are EMPTY suddenly. You can't start report-tasks anymore. They disappeared.
We checked:
- Discovered Inventory -> Data Warehouse Synchronization Server
- State is Critical.
- Display name is wild numbers+characters, is this normal?
- Health explorer says:
'DeploymentException': Failed to deploy reports for management pack with version
dependent id '471cffe4-2085-cf71-2513-ecbac52be31f'. Failed to deploy report
'Microsoft.Windows.Server.Reports.PerformanceBySystem'. AdjustDataSources:
Exception <ErrorCode
xmlns="http://www.microsoft.com/sql/reportingservices">rsItemNotFound</ErrorCode><HttpStatus
xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The item '/Data
Warehouse Main' cannot be found.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsItemNotFound&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.2100.60</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server
Reporting Services</ProductName><ProductVersion
xmlns="http://www.microsoft.com/sql/reportingservices">11.0.2100.60</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem
xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsItemNotFound"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsItemNotFound&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.2100.60"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The item '/Data
Warehouse Main' cannot be
found.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" />

Hi,
Generally these errors are caused by improper SQL SRS configuration, to confirm SRS is initialized correctly, are you able to navigate to http://localhost/reports or http://localhost/reportserver?
Are you upgraded to SP1 RC yet and have you the latest versions of the MP' as a lot of these reporting issues have been resolved?
Also re-check all your SRS accounts have the relevant permissions and all permissions in IIS are correct?
You could try resetting the SRS configuration and re-install Reporting.
1. COPY the ResetSRS.exe file in SupportTools folder of the OM 2007 media to
C:.
2. Open a Command Prompt and change your path to C:.
3. Type "ResetSRS.exe MSSQLSERVER" where MSSQLSERVER is your SQL instance
name.
4. Then open Reporting Services Configuration Console, select Web Service
Identity and click Apply.
5. Finally, reinstall your reporting service by running OMSetup.exe again.
In addition, please provice the event ID under event vierwers, so that we could analyze it further.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0a66dfa4-a39c-44c4-93cf-ca064d6bc52c/scom-reporting-error-rsitemnotfound-?forum=operationsmanagerreporting
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Artwork doesn't work anymore

I all used to create artwork in Photoshop CS4 then dragging them to the artwork window in iTunes (9.2.1). Suddenly it doesn't work anymore. All I get is a black image, and if I go in Infos, my image is a very small dot that I can barely manage to click and delete. My image resolution in Photoshop is that same as before, 8 bit, RGB, usually around 4 '' x 4 '' at 72-100 dpi. Jpg format in general.
Was there an update at one point what changed to way artwork can be import or translated in iTunes. It's getting annoying

There are a few other threads on this. I too usually use photoshop to clean-up/scan/create almost all of my cover art. So not being able to drag and drop- especially when this feature has always worked before, is a huge pain/problem.
You can no longer drag drop or even cut & paste art from photoshop into itunes. Also, you can no longer copy art FROM itunes into photoshop.
I hope this is something that apple will fix, but I wonder if they even care that this is a problem...

Yosemite Upgrade CS4 doesn't work anymore

Similar Messages

Maybe you are looking for