Z_Copied_Std._SAP_Script delete & create with the same name?

Hi,
(All is in DEV ssytem only and I hv seen RSTXSCRP prog)
We hv copied(cloned) a Standard SAP Script (say, SD_INVOICE) into Custom_SD_INVOICE.
Now, for some reasons, again I hv to copy/clone the SD_INVOICE into Custom one, but, I must give the same name as Custom_SD_INVOICE!!
So, pls. let me know that, Is my below understanding is correct,
1) Delete the existing Custom_SD_INVOICE
2) Copy the Standard SAP Script SD_INVOICE into Custom_SD_INVOICE
Now, I can work on newely created Custom_SD_INVOICE
3) So, I guess, system will prompt me for a transport, while deleting the existing Custom_SD_INVOICE, so, then, What TYPE of transport is it? is it UNCLASSIFIED one?
4) Can I combine the both tasks (Deleting & Creating) in one transport?
Thank you

Hi,
1) Delete the existing Custom_SD_INVOICE
    Yes, delete existing script first. If your first TR is already released. you will have to create new TR (workbench request) to delete it.
2) Copy the Standard SAP Script SD_INVOICE into Custom_SD_INVOICE
Now, I can work on newely created Custom_SD_INVOICE
   Use same TR as above and create new scipt using standard script.
3) So, I guess, system will prompt me for a transport, while deleting the existing Custom_SD_INVOICE, so, then, What TYPE of transport is it? is it UNCLASSIFIED one?
    If your first TR is not released then you can use same TR to delete your custom script and to create new custom script.
Please let me know if you face any other issues.
Thanks,
Archana

Similar Messages

Folder created with the same name as a fcpx library

I recently moved to a new Mac Pro with a Pegasus 2 array from an old machine. I copied my old library across since I couldn't migrate because the old machine was a server.
now every time a run FCPX I get a new folder created with the same name as the fcp library. Inside is library with a timestamp as a name, and inside that is a folder structure which matches the true folder structure in the real library. The contents of the subfolders are empty (original media, eg). This parallel folder/library structure remains when I exit fcpx. Nothing of valuie is put in it. A new clip or still gets put in the correct place in the true library.
If I delete this parallel stuff it gets created again next time I run fcpx. The permissions look ok, the user id is 501.
Anybody have any suggestions as to what I should do?
Chris

Sounds like the folder of back-up libraries. If so, they take up a tiny amount of space and could prove to be very valuable if a project breaks. Does it look similar to this?
Russ

Unreliable - Deleting multiple files/folders with the same name?

I have recently found when trying to delete folders with the same name it is unreliable, is there a better way, ie termin that would work for the following...
I have 1000's folders with sub-folders to delete...
Please see screenshot each folder is identical apart from 'copy #' at the end of the folder
1. using search in top level folder toobar for "instructions"
2. 647 results are retuned
3. Select all and [cmd] [del]
4. Repeat step 1 but some folders are still are found.
Any ideas ?

Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-api</artifactId>
               <version>${jsf.version}</version>
          </dependency>
          <dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-impl</artifactId>
               <version>${jsf.version}</version>
          </dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10

Create a dir if there exists a file with the same name

Hi..
I want to create a directory with file.mkdir(). But I recognize a problem when there is allready a File with the same name.
Is there any solution to handle a dir and a file with the same name?
eg: Dir "C:\Windows" and File "C:\Windows"
wami

This explains it... use "java Test2 asdsfd" for example. While this example doesn't show it,
if you try to create a dir with another slash on it c:\blah\ , it still can't be done.
import java.io.*;
public class Test2
public static void main (String args[]) throws Exception
     if (args.length < 1){
     System.out.println("Test2 [name]");
     System.out.println("creating bogus file " +args[0]);
     FileOutputStream fo = new FileOutputStream(args[0]);
     fo.write(55);
     fo.write(55);
     fo.write(55);
     fo.close();
     File x = new File(args[0]);
     if (x.mkdir()) System.out.println("made dir " + args[0]);
     else System.out.println("failed to make dir " + args[0]);
     System.out.println("deleting file " + args[0]);
     x.delete();
     if (x.mkdir()) System.out.println("made dir " + args[0]);
     else System.out.println("failed to make dir " + args[0] + " again !");
}

I notice that in the new update to Firefox if I have two bookmark folders with the same name Firefox will end up deleting one of them.

Both of these problems with the bookmarks started occurring after I installed the latest update to Firefox.
I frequently have bookmark folders of the same name under the older version of Firefox and it has never been a problem before. It is now, and I notice that after I've created two folders with the same name Firefox will end up deleting one of the folders, almost always the older of the two folders (the one created first, chronologically).
I have also noticed that with the new update Firefox will occasionally fail to open all bookmarks in Tabs if I've asked it to do so. I can simply close Firefox and reopen the program and it will work again, but I don't know why this bug is occuring in the first place.

You are using two IP address ranges.. which results in the printer being cut off from the other network..
Why do you have two networks?? It is always better in home situations to run one network.
If you have work setup with an enterprise level router you can setup routes between the two networks.. this is not possible on domestic level apple routers.

Why is a recorded stream getting delete when a live stream with the same name is received?

i have an application that plays prerecorded streams. The streamnames are loaded from a xml file an put into an array on the server side. The streams were changed with an Interval.
Thats all works fine.
i want that as soon as a livestreams with the same name as a prerecorded stream in the array is received the livestream is played in the playlist.
I know if i use the starttime -2 in the stream.play-method that the livestream is played instead of the prerecorded stream. But if i use this, the prerecorded streams in the streamfolder getting deleted.
the sequence of my code:
var StreamArray = new Array();
var location_xml = new XML();
var xmlfileObj = new File("Location_list.xml");
location_xml.onLoad = function( success ) {
if(location_xml.loaded == true) {
if (location_xml.firstChild.hasChildNodes()) {
for (var aNode = location_xml.firstChild.firstChild; aNode != null; aNode=aNode.nextSibling) {
if (aNode.nodeType == 1) {
StreamArray[aNode.attributes.id] = aNode.attributes.name ;
location_xml.load(xmlfileObj);
my xml doc:
<?xml version='1.0' encoding='utf-8'?>
<location>
<loc id="0" name="home1" />
<loc id="1" name="home2" />
<loc id="2" name="home3" />
<loc id="3" name="home4" />
</location>
Also it would be very helpfully if i could set the names of the prerecorded streams with the name-attribute.
For example:
for(var i = 0; i < StreamArray.length; i++) {
StreamArray[i].name = StreamArray[i];
because i also only can get the livestreams(detected on the application.onPublish-function) with streamObj.name.
many many many thanks for any replies or solutions,
Arvit

Hey Ronald Everett,
Thanks for the question. Are these CD’s that you purchased or created yourself? If it is the latter, Gracenote media database information will not appear. For more information on Gracenote, see this resource:
iTunes 11 for Mac: If you don’t see song information
http://support.apple.com/kb/PH12280
Thanks,
Matt M.

I tried to make another account on my school Macbook Pro, made the Admin, account with the same name as the one I was using, deleted it and then all my desktop data is gone.

So, the problem is,
I used these school Macs right? They're school handed and stuff. Then one day I decided I want admin so I do this thing where I "reset" everything on the Macbook using this Video (at the bottom) http://www.wikihow.com/Reset-a-Lost-Admin-Password-on-Mac-OS-X
Then I do it, it takes me to the new User. That's not what I want so I shut down, then made an account with the same name as my current account (let's call it Y). Then I delete Y on purpose. I deleted it because I didn't want my school to know I had this account. Realise I wanted it again so I made an account, let's call it X then when I have X I deleted Y. Then I realised my AirDrop name said X so then I made a new account, this time let's call it Z, with Z I delete X and then I deleted Z because I don't want my school to know I have Z but then Z is also the same name as my main/current account. Somehow or something I delete my current account leaving me with Z. Now I can see my account and stuff but don't know how to restore it.
Picture will be provides later.
PLEASE PLEASE PLEASE HELP ME. I HAVE SCHOOL TOMORROW AND I DON'T WANT MY PARENTS TO FIND OUT.

It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents.

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

Newbie : How can i create 2 users with the same name on diff domain name ?

I have two domains on my server
exemple1.com
exemple2.com
and i want to create one user for each domain with the same name
[email protected] and [email protected]
curently i can create one user, and it's the same user for both domains :-/
how ?
thanks
Hète

I must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?

Can I create a lot of instance with the same name?

I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?

You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
// array
int numCreatures = randomGeneratedCreatureQuantity();
Creature[] monsters = new Creature[numCreatures];
for (int j = 0; j < numCreatures; j++) {
monsters[j] = new Creature();
// Or a list
int numCreatures = randomGeneratedCreatureQuantity();
ArrayList monsters = new ArrayList();
for (int j = 0; j < numCreatures; j++) {
monsters.add(new Creature());
}Good luck
Lee

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Is it possible to create a Clone database with the same name of source db ?

Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Z_Copied_Std._SAP_Script delete & create with the same name?

Similar Messages

Maybe you are looking for