ZCM 11.3 Windows Client Net 4.0 requirement

Installed 11.3 Server upgrade yesterday. Install went great, no noticable issues new features look good. Started to roll out 11.3 client most are failing with Net 4.0 not found and is required. Check on a number of computers (All Win 7 sp1 64 bit) ran zac ps and verified Net 4.0 is on computers. Net 4.5 shows up as a choice to install but based on error message it wants Net 4.0. Any ideas on where or what to look for to resolve the error????

I downloaded one of the "Full" 11.3.0 Agents and extracted it.
It contains the .NET 4.0 Intall (Not 4.5).
I have not yet tried installing it on a device w/o .NET but I'm guessing
perhaps it was not a full .NET 4.0 install on the devices or something
along those lines.
On 2/27/2014 1:36 PM, pwolff2000 wrote:
>
> Just finished installing Net 4.5 on a half dozen workstations, and now
> the 11.3 client is installing. Checked again on the failing
> workstations, they have Net 4 Client, which I assume is not the entire
> Net 4.0 framework. Just another bump on the road to ZCM happiness!
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

WINDOWS 용 SQL*NET V1 사용 시 ORA-6136 조치 방법

제품 : SQL*NET
작성날짜 : 1995-11-07
WINDOWS 용 SQL*NET V1 사용 시 ORA-6136 조치 방법
===============================================
Client and Server 환경에서 간혹 SQL*NET으로 Server에 접속하려고 할 때,
ORA-6136 Error가 발생하면서 Unix Server에서 $tcpctl stop 으로 orasrv의
Process를 정지시키려고 해도 아무런 반응없이 Holding되는 경우가 발생하면서
다음과 같은 메서지가 나타납니다.
06136, 00000, "NETTCP: error during connection handshake"
// *Cause: Network I/O failure occurred while communicating with the
// host's SQL*Net TCP/IP server.
// See the SQL*Net TCP/IP server log file for more details.
// *Action: Contact your customer support representative.
상기의 에러가 나타날 경우에는 아래와 같은 방법으로 orasrv를 기동시키십시오.
1. TCPCTL Utility를 이용하여 다음의 Option을 부여하여 Start하는 방법.
$tcpctl start listen=30 timeout=30 forkon
listen=<queue size>이며, 청취자 열의 크기를 지정.
timeout=<seconds>이며, 지정된 시간에 orasrv와의 응답 확인 시간을 나타냄.
forkon SQL*net이 orasrv process에 접근하는 방법을 나타냄.
System에 따라서 forkon option이 적용 않되는 경우도 있음.
2. Client에서 접속을 하여 사용하다가 비정상 종료(Session이 맺어진 상태에서
Client의 Power Off)를 하여 Server에 Processor가 남아 있고, orasrv를 통해
접속할 수 있는 Session의 수가 점점 줄어들 경우가 있는 데 이러한 경우에는
orasrv를(tcpctl stop or UNIX kill command를 이용)강제로 종료하시고 다음과
같이 Start 시켜 주십시오.
#nohup tcpctl start ( Client의 비정상 종료가 Orasrv에는 영향을 미치지 않음)
또는
#orasrv (ORACLE_HOME\bin directory에서 직접 orasrv processor를 띄운다)

Windows client - Linux oracle server SSO through Win2003 DC

Hi,
I'm trying to do SSO with the captioned setting, the outline can be simplified as below:
windows cleint --> Win2003 DC --> Linux Oracle server
Of course, the Linux server would issue kerberos ticket to the Windows client after which successfully authenticates with the Win2003 DC.
I have problem doing test connection for both Windows client & Linux server when connecting to the database. Both with error "ORA-12638: Credential retrieval failed" when testing with Oracle Net manager. Listener & DB were both started.
Platform: Redhat Enterprise ES4, Oracle 10.2.0
The configuration files are as follows:-
SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (BEQ, KERBEROS5)
SQLNET.KERBEROS5_KEYTAB = /u01/app/oracle/oracle/product/10.2.0/db_1/ORACLE.keytab
NAMES.DIRECTORY_PATH= (TNSNAMES)
SQLNET.KERBEROS5_CONF = /etc/krb5.conf
SQLNET.KERBEROS5_CONF_MIT = TRUE
NAMES.DEFAULT_DOMAIN = test.com
SQLNET.AUTHENTICATION_KERBEROS5_SERVICE = ORACLE
TRACE_LEVEL_SERVER=16
TRACE_DIRECTORY_SERVER=/u01/app/oracle/oracle/product/10.2.0/db_1/network/log/
TRACE_FILE_SERVER=server
TRACE_UNIQUE_SERVER=ON
LISTENER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl)
(ORACLE_HOME = /u01/app/oracle/oracle/product/10.2.0/db_1)
(GLOBAL_DBNAME = ORCL.TEST.COM)
# (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = rhedlora)(PORT = 1521))
TNSNAMES.ORA
ORCL.TEST.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rhedlora)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.test.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Can anyone advise what's wrong? Thanks in advance.

Sorry for miscommunication..
this is the actual listner information :
LSNRCTL> start
Starting tnslsnr: please wait...TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ECT-STPPC2316.BLR.INDIA.
CGINET)(PORT=1521)))Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Produc
tion
Start Date 20-DEC-2007 13:32:16
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File E:\oracle\ora92\network\admin\listener.ora
Listener Log File E:\oracle\ora92\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ECT-STPPC2316.BLR.INDIA.CGINET)(PORT
=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
=============
I am using different listner(Listner).
Please let me know if I have to make any configuration at Client Machine.

10g R2 client설치후 Net Configuration Assistant에서 오류

Client 환경은 Window vista Home PremiumK이고, 10g R2 client를 인스톨한후
Net Configuration Assistant를 실행하면
ORA-12170 오류가 발생합니다.
어디를 어떻게 수정해야하는지, 아니면 다시 인스톨을 해야하는지 좀 알려주세요.
하루 종일 헤매고 있습니다.

tnsping 사용후 결과 값에 대한 로그와 기타 network 설정에 관련된 파일의 내용을 올려 주시면 분석이 되리라 생각합니다. tnsnaems.ora , sqlnet.ora , 서버측의 listener.ora 또는 서버측의 리스너 프로세스 존재 여부 등입니다.

Login intermittently slow with ZCM agent AND Novell client

We continue to struggle with intermittently slow logins in our environment. In testing, we noticed that logins are very fast (10-20 seconds) when only the Novell Client is installed, and very fast (~10 seconds) when only the ZCM agent is installed. However, when they are both installed, logins slow down, sometimes to 1.5 minutes or longer.
We have checked DNS and rDNS, and they are both configured properly. SLP is working properly as demonstrated by the fast logins when only the client is installed. We use LDAP for user lookup, and it also works very fast to resolve user names (~ 1 second).
We are using ZCM 10.3.1, and the client is fully patched as well (both Novell Client 2 and 4.91)
Are there any specific settings (for the ZCM agent or the client itself) that might address this issue?

My apologies, I told you to remove the wrong thing.
I should have said NMAS instead of CASA.
I am just so used to saying CASA when talking about ZCM.
In regards to NMAS, you could simply rename "NWSSO.DLL" as a test.
If NMAS is installed which is tested by the existence of this DLL, then
a certain NMAS call is always made, which in some cases can take a long
time.
On 11/9/2010 12:06 PM, dshofkom33 wrote:
>
> craig_wilson;2042688 Wrote:
>> Try removing CASA from the device and see if that makes a difference.
>> A TID will be out on the issue soon.
>>
>> On 10/5/2010 4:36 PM, kjhurni wrote:
>>>
>>> Hmm, I will have to try that. I've only observed that with ZCM
>>> installed (with Novell Client 4.91 SP5 on XP) that the login time
>> goes
>>> from about 12-15 seconds to about 50-70 seconds.
>>>
>>> But I've not tried "just" the ZCM agent.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
> I removed CASA and now I cannot sign into ZCM. I get the "unable to
> login to network because the login credentials are incorrect" Windows
> Security Message. Any ideas?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

ORA-12533 Coupled with 32 bit & 64 bit Windows client installations?

Hi all,
I have the 32 bit Windows client version 10.2.0.3.0 installed on my Windows 7 64 bit machine. My TNS files where configured properly, and my connections were working just fine within our web applications.
Recently, I've begun to work on a C# Visual Studio console application and when running this app against the very same databases that I have been connecting to before, I ran into this initial error:
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed
So, I installed a 64 bit Windows client version 11.2.0.1.0 (I did not remove the 32 bit Oracle client).
Now, with both the 32 and the 64 bit Oracle clients installed, I can still access all my previous web applications. However, the console app (which, again, is accessing the same databases from the same host/starting location) is now giving me this error:
ORA-12533: TNS:illegal ADDRESS parameters
I've looked around, and what I've read indicates a problem(s) with the ADDRESS parms in the TNSnames.ora file.
Yet, my TNS file was not changed...and still works as needed for the other, web based apps. I have, however, only 1 TNSnames.ora file...located in the original 32 bit client installation folders.
Why would the console app choke with the ORA-12533 error, when the web apps still work?
Does each client installation require a TNSnames.ora file? I noticed that the 64 bit installation does not have the \network\ADMIN folder path (nor the actual TNSnames.ora file) like the 32 bit installation does.
Thanks in advance.
b.t.w. I can still use (with both client versions installed) my SQLPlus to connect to the databases.
Edited by: user8746390 on Dec 5, 2012 11:56 AM
Edited by: user8746390 on Dec 5, 2012 12:08 PM

Hi,
The 32-bit client and ODP is supported on x64 with .NET applications running in 32-bit mode. You just need to make sure your application pool enables 32-bit.
Regards
Jenny B.

WINDOWS 용 SQL*NET 사용 시 TNS-12203

제품 : SQL*NET
작성날짜 : 2004-11-09
WINDOWS 용 SQL*NET 사용 시 TNS-12203
====================================
PURPOSE
TNS-12203 "TNS:unable to connect to destination"은 여러가지 원인 때문에
발생할 수 있습니다. 여기서는 가장 일반적인 몇 가지 원인을 설명합니다.
1. WINDOWS 용 TCP/IP 어댑터를 설치하지 않은 상태에서 연결하려 하면 TNS-
12203이 발생할 수 있습니다. SQL*NET TCP/IP V2는 SQL*NET V2와 V2 TCP/IP
어댑터 등 두가지 제품으로 구성됩니다. 이들은 별도의 두 키트로 되어 있는데,
반드시 두 키트를 모두 설치해야 합니다.
2. TNS-12203 에러는 WINDOWS 용 ORACLE SQL*NET소프트웨어가 ORACLE HOME
디렉토리를 찾을 수 없다는 의미일 수 있습니다. 이 문제를 해결하려면, 먼저
WIN.INI 화일의 ORACLE 부분에 다음 항목이 있는지 확인하십시오.
[ORACLE]
ORA_CONFIG=C:\WINDOWS\ORACLE.INI
WINDOWS디렉토리가 C:\WINDOWS가 아니면, 위 행의 C:\WINDOWS 부분을 그
이름으로 바꾸십시오. 그런 다음, ORACLE 소프트웨어를 다시 설치하십시오.
ORACLE.INI 화일이 있으면 그 ORACLE.INI 화일에 다음 행이 있는지
확인하십시오.
ORACLE_HOME=C:\ORAWIN
ORACLE 홈 디렉토리가 C:\ORAWIN이 아니면 위 행의 C:\ORAWIN 부분을 그
이름으로 바꾸십시오.
3. TNSNAMES.ORA가 ORACLE 홈 디렉토리 아래의 NETWORK\ADMIN에 있는지
확인하십시요. ORACLE 홈 디렉토리는 ORACLE.INI(또는 WIN.INI의
ORA_CONFIG 매개변수가 지시하는 파일)의 ORACLE_HOME 에 의해 정의됩니다.
4. 서버 쪽에서 실행 중인 SQL*NET V2 TCP/IP Listener가 없어도 TNS-12203이
발생할 수 있습니다. 서버 쪽에서 실행 중인 SQL*NET V2가 있는지 확인하십시오.
서버 쪽에서 Listener Control 유틸리티(LSNRCTL)를 사용하면 서버의 V2
Listener가 실행 중인지 확인할 수 있습니다. 서버에서 "LSNRCTL STATUS"
명령을 실행하십시오. Listener Control 유틸리티에 대해서는 SQL*NET
Administrator's Guide를 참조하십시오.
5. 연결할 SERVICES 이름에 대해 CONNECT DESCRIPTOR에 정확한 ADDRESS
매개 변수를 지정했는지 확인하십시오. 정확한 ADDRESS 매개변수를 사용 중인지
확인하는 방법은, WINDOWS 클라이언트에서 사용 할 것과 같은 ADDRESS 매개
변수를 가진 TNSNAMES.ORA를 사용하여 서버에서 루프백을 해 보는 것입니다.
루프백을 수행한다는 것은 데이타베이스와 같은 기계에서 SQL*DBA 등을
호출하고 연결 스트링을 지정함으로써 SQL*NET V2를 통해 연결한다는 뜻입니다.
6. JSB VSL 소켓이 초기화되지 않으면 TNS-12203이 발생할 수 있습니다. 이
문제를 해결하려면 다음 사항을 점검하여 JSB VSL 레이어가 정확하게
초기화되었는 지 확인하십시요.
1) ORACLE.INI 파일(또는 WIN.INI의 ORA_CONFIG 매개변수가 지시하는 파일)의
업체키 매개변수 TCP_VENDOR가 정확하게 설정되었는 지 확인하십시요
2) ORACLE_HOME\BIN 디렉토리에 MSOCKLIB.DLL이 있는지 확인하십시요.
3) ORACLE_HOME\BIN 디렉토리에 선택된 JSB 업체 특유의 DLL이 있는지, 또는
그 JSB 업체 특유의 TSR 파일이 실행되는 지 확인하십시요.
4) WINDOWS 홈 디렉토리에 VSL.INI 파일이 있는 지 확인하십시요.
7. TNS-12203에 이어 실제 문제가 무엇인지 더 자세하게 나타내 주는
또 다른 에러가 발생할 수 있습니다. 화면에서 다른 에러가 보이지 않으면
ORACLE_HOME\NETWORK\LOG 디렉토리의 SQLNET.LOG 파일을 점검하십시오.

change (Port = 1526) to 1521 and try to connect
add the entry to tnsnames.ora file on both client and server
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST =192.168.25.16 )(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
)Edited by: rajeysh on May 15, 2011 3:02 PM

Cisco Jabber for Windows Client SDK

Is there an SDK for Cisco Jabber for Windows client? I could only find the Web SDK. Are there no other SDKs that would let me control features of the Jabber Windows Client?

And in order to avoid TAPI limitation, they say they have started using Jabber which controls all phone functionalities through an Application User connected to the Call Manager.
Assuming they are referring to the normal Jabber for Windows/Mac/iOS/Android applications then this is wrong. Jabber - the client, not the IM&P servers which are part of the CUCM cluster (if you're familiar with Lync consider CUCM+IM&P servers a Front End Pool) - do not use an Application User at all. When a user starts Jabber, assuming SAML SSO is off, they supply an email address. This is used to find the servers via DNS SRV records, or the Mobile and Remote Access Expressway (roughly analogous to a Lync Edge pool) to tunnel through the firewall. After the email address they are prompted for their End User username and password. This is then used to access several APIs on the server, namely the User Data Service to discover what the user has. This would include what the user has configured/available to them. After this is done the Jabber client does one of three things with respect to phone functionality:
If the user has no phone devices provisioned for them - physical or software - it becomes an IM&P client only.
If the user has a software phone phone provisioned, it registers as that using SIP. In this way Jabber is the actual phone. This is called a CSF device for Jabber Windows/OS X.
If the user has a desk phone assigned to their End User account AND administrative policy is to default to desk phone control, it registers to CTI Manager on the CUCM server to control the user's physical phone.
A user can toggle between option two and three, if appropriately provisioned, but cannot have both simultaneously. In other words, Jabber is either controlling a physical phone over CTI or is a phone itself using SIP. The difference is where the audio/video media is sent from/to.
All of this happens using that human's End User credentials.
Now, if you wanted to have a server control the user's phone - either a physical one or Jabber - you would use the TSP as an interface to CTI Manager on the CUCM server and receive real-time events (e.g. the user went off-hook, the phone is ringing with this caller ID, etc.) and issue commands to that phone (e.g. make a call to X). This is done using an Application User account because the server would need to do this for multiple users simultaneously. If you also use the Super Provider concept, the CUCM administrator doesn't have to take the extra step of associating every phone to your Application User manually. Instead, you can simply issue CTI subscriptions to see any/all device activity you want.
This is all assuming you wanted to do the integration server-side to avoid having to update the Cisco TSP application on every user PC (which also limits your WPF application to machines capable of running the TSP) every time the CUCM administrator patches the servers. If you don't care about that, then you can do this all client-side on the user's PC, and have them supply their End User credentials.
Of course, you could also reconsider the Jabber SDK and just embed the make/receive call functionality directly into your application instead.

Please fix: Common Open File Dialog Box to support Favorites (Follow-up: Better provisioning in the Windows client)

One more thing:
What's missing is favorites is a way to use the favorites space in the Common Open File Dialog Box.
Please obsolete or (re)develop components in Windows, so those components support any new workflows in Windows!
On example of an application where you cannot use Favorites is Adobe Photoshop. It uses the Common Open File Dialog Box in Windows (which does not support Favorites).
Comparing Finder (MacOS) with Windows Explorer - you "seem" to have the option of using favorites to pin folders.
Well, if your application calls Windows to use the Common Open File Dialog Box - it's actually NOT POSSIBLE AT ALL to navigate to the user concepts (user folders) pinned to favorites.
Again, the favorites namespace is completely unused (not provisioned) out-of-the-box. That's may be ok, however it's not fully implemented across Windows and just another example of stuff accumulating up to being unusable.
What's missing is favorites is a way to use the favorites space in the Common Open File Dialog Box.
Ref.: Better provisioning in the Windows client
https://social.technet.microsoft.com/Forums/en-US/dbb2102f-00b7-47ca-88f2-4f88cd9d3409/followup-starting-launching-and-switching-?forum=WinPreview2014Feedback#2aba34e9-6074-4750-8f66-425bdeacc705
https://social.technet.microsoft.com/Forums/en-US/168bb9f9-ab18-42e6-9f20-5e36e71f742c/merging-the-task-bar-and-the-start-screen-area?forum=WinPreview2014Feedback#168bb9f9-ab18-42e6-9f20-5e36e71f742c
https://social.technet.microsoft.com/Forums/en-US/59a5bb6a-0368-4f34-bea4-b9811ac0bf8c/dont-forget-development-of-the-start-screen-remember-virtualization-of-it-too-purpose-is-hud?forum=WinPreview2014Feedback#59a5bb6a-0368-4f34-bea4-b9811ac0bf8c
https://social.technet.microsoft.com/Forums/en-US/c10168fe-a534-44aa-a0ec-e9defc71da5f/better-provisioning-in-windows-client-remember-templates-for-the-start-screen-like-the-need-for?forum=WinPreview2014Feedback#c10168fe-a534-44aa-a0ec-e9defc71da5f

Congrats to Carmelo!
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

We installed Windows XP net framework KB982524 yesterday, and ever since then mozilla will not respond when we try to open it.

== Issue
==
I have another kind of problem with Firefox
== Description
==
We had a Windows XP net framework update yesterday KB982524, and ever since than when we try to log on to mozilla the program will not respond. We tried re-starting a couple of times with no luck.
== This happened
==
Every time Firefox opened
== yesterday June 23, 2010
==
== User Agent
==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.4; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; PeoplePal 6.2; PeoplePal 3.0; .NET CLR 2.0.50727; IEMB3; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; yie8)

I have a similar problem. I updated Firefox to 3.6.4 a few days ago. Then I tried to load Microsoft update KB982524. KB982524 would not load correctly. After that Internet Explorer will not start. I get a very brief flash of Internet Explorer running, then the window closes. So now I cant run Microsoft Update.
Windows XP SP3
Firefox 3.6.6
Internet Explorer 8

Using iChat Server with Windows clients in an integrated Active Directory/Open Directory environment

A co-worker (Super Brent) and I were working on using iChat as an internal IM server after having used Openfire for a couple days. The reason for switching was basically that we had a Mac Mini Server that was available so we decided to take this on.
First problem: Knowing whether or not Kerberos was needed for AD/OD integration. We spent a ton of time on this, not knowing a huge amount about AD and with our server administrator on courses, we just kept poking at it and removed Kerberos.
For the AD/OD integration, we first bound the Mac Mini to our Active Directory server. We shut off LDAPv3 support as we only wanted to use the AD functionality. Additionally, we ensured that the search policy in Directory Utility only used Active Directory. Then we created an Open Directory master in the Open Directory service. We enabled a self-signed certificate and trusted it locally. After creating the iChat service, ensure that you use the self-signed SSL Certificate and set authentication to Standard. (no kerberos).
Second problem: Once this was complete, we started to test clients out. We were unable to successfully login using our AD credentials using Spark IM and Pandium IM. After trying nearly 100 different variations of server configs, we decided to try a new client. I installed Miranda IM on my Windows XP machine and tried a few different setups. It turned out that the magic potion was to make sure that the "resource" field was set to "Home" and use SSL for encryption. This resource setting was the deal breaker for the other IM clients as many of them such as Spark and Pandium do not have this as a login option.
We ended up using Pidgin IM as the Windows client of choice as it did have the resource variable and it's interface was the best suited for our environment and users.
I hope this helps someone out there as we spent days looking all over the internet trying to figure this out.
Cheers,
Frenchy and Super Brent

Hi,
iChat Server is not something that I know a great deal about.
I tend to point people to the OS X Server Communities and to look out for posts by Tim Harris.
Thanks for taking the time to post this.
9:58 PM Friday; February 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Windows client error joining with Samba 4.2 Active Directory server

I have a basic samba 4.2 ADC setup on CentOS 7 and I get a RPC server not available whenever I attempt to join a windows client to the domain. The smb.conf is default on created during provisioning. All indicated pre-testing seems to work as expected. The windows client finds the domain and recognizes a valid user or not but the last step of joining the domain ends with the error "Unable to join the Domain RPC server not available. Does anyone have any ideas?
Thanks Paul
This topic first appeared in the Spiceworks Community

I have a scenario for you in active directory when two passwords may be valid:
Old passwords can also work on domain controllers that have not received replication yet from either the domain controller the password was changed on, or the PDC emulator in the domain.
Let's take a scenario where we have a 3 site, 3 domain controller (DC) active directory: Site1 with DC1, site2 with DC2 and site3 with DC3.
The ACS application resides in Site3 and is configured to use DC3 for authentication. We have a user "user1" with a password of "123".
User1 decides to call the helpdesk and changes his password to "456".
The helpdesk uses DC1 to make password changes because they are located in site1. For a period of time (based on replication, which defaults to 3 hours between sites) the 123 password and the 456 password will be
valid.
If the user1 user tries the "123" password it will work until DC3 receives the changed password from normal replication. If user1 tries to use 456, DC3 will flag this as a wrong password, and then check the PDC
emulator of the domain to see if it has received a newer password. The PDC emulator will validate the login, and then trigger an immediate replication with DC3.
Regards,
~JG
Do rate helpful posts

SMB Slow connection with upgrade to SnoW Leopard and Windows Clients.

<pre>
Dear,
I have now upgraded my MAC OS X LEOPARD 10,5,8 to new SNOW LEOPARD 10,6,2 and if some problems disappear I have a newer big one !
Now every time a Windows CLient try to connect to a SMB Share of SL server that take a long time about 10-15 seconds to open after that depending on client OS that could be nice for a moment (windows 7 and XP) or browsing stay very slow like for 2003 server connecting to Share on S.Leopard.
Could you please help me.
My SL are the main SMB share computer with all data it is connect like other clients to AD (SBS2003).
I have a SBS2003 server that are Master of Domain
and a Server 2008 acting like Terminal Server also member server of domain.
Here are kind of log I receive from SMBD.LOG: I suppose the Credentials problem when connecting are my explanation but how to avoid that !
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(332)
netbios connect: name1=MACSRV name2=NOMAD
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(339)
netbios connect: local=macsrv remote=nomad, name type = 0
2009/11/14 13:37:08, 2, pid=64794 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:18, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=15 errno=2
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(580)
dsDoDirNodeAuthOnRecordType gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(387)
opendirectoryuser_auth_and_sessionkey gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=28 errno=2
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user fabrice -> fabrice -> fabrice succeeded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwin_streams.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwinacl.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/notify_kqueue.dylib' loaded
2009/11/14 13:37:28, 1, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/service.c:makeconnectionsnum(1092)
nomad (192.168.2.20) connect to service NetDown initially as user fabrice (uid=501, gid=20) (pid 64803)
I also have some kind of following message:
2009/11/14 13:35:18, 0, pid=64579 /SourceCache/samba/samba-235/samba/source/lib/utilsock.c:readdata(534)
read_data: read failure for 4 bytes to client 192.168.2.20. Error = Connection reset by peer
NOte that initialy I don't have problem with MAC OS Client but to be sure they use SMB I have desactived AFP server on SNOW LEOPARD SERVER and now they can't browse the share in finder but when connection via COMMAND+K and SMB://server/share that give now the same error but a little bit faster than windows clients.
Could you help me to troubleshout that problem ?
Thanks for your help.
Felee
</pre>

Dear CarlosGBA,
So when you put 2 computers of your network in WORKGROUP in place of DOMAIN the 38 others works fine ? Strange ?
I have about 15 computers, some are already in workgroup other are linux smb other MAC, the data server are MAC OS X SL, the problem appear for all windows machines, I have try to dissable NTLMV2 and Kerberos since it is probably the faulty element with opendirectory,but always without success !
I don't know what I can do to trouble shout, I hope next release 10.6.3 come soon and correct about all SMB problem ! Probably a dream only ! Since I ask my self if Apple want to correct something andwhy is this problem let without solutionso long ! For a company it is a big problem.I suppose that Apple never read this forum and never answer our problem ! May be I should contact the support phone to be helped !
Thanks for you help.

ZCM 11.3 Windows Client Net 4.0 requirement

Similar Messages

Maybe you are looking for