ZEN 4.01IR7, PXE Load USB Modules

Question

L.S.
I had the following problem and would like to share my solution:
ZEN 4.01 IR7, PXE boot.
Intel D102GCC2 motherboard (rather new hardware at 08-2006)
On PXE Boot, the system freezes on "Load USB Modules"
I put the line "USB=NO" in SYS:\TFTP\CMD\z_auto.cmd en z_maint.cmd.
Then Linux does not load USB modules.
As long as you don't need USB support while imaging this works fine.
Better then disabeling USB (2.0) in the bios.
I can't test at the moment, but I think this wil also work on ZEN 6.5 /
7.0.
Thomas Roes
Switact

Answer 1

On Tue, 29 Aug 2006 15:06:24 GMT, Thomas Roes wrote:
> I had the following problem and would like to share my solution:
thanks for letting us know..
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net